Search

The large number of rural Roman settlements known from the Low Countries is generally characterised by a poor preservation of ecological proxies due to the absence of waterlogged contexts. The riverside site of Wijmeers (Wichelen, Belgium), a small rural settlement located in the Lower Scheldt basin, represents a rare exception to this pattern. Due to the presence of a waterlogged sequence with Roman (late 1st–3rd centuries AD) waste layers, located only a few metres from a main building structure, and the covering of the site with alluvial sediments shortly after its abandonment, the preservation condition of charred and uncharred organic materials was exceptional. The combined study of these proxies (pollen, seeds, charcoal, mollusc shells and animal bones) presents unique insights into the subsistence economy of a Roman rural household in the Lower Scheldt valley in general, and especially its exploitation of the valley and river environments. Besides this cultural–economical perspective, the site provides key information for understanding the chronology of fluvial and alluvial processes in the Lower Scheldt Basin for a large part of the Subatlantic period (Iron Age to Early Middle Ages, ca 800 BC–900 AD). [ABSTRACT FROM AUTHOR]

This research covers the design of a novel dual-actuator servo-electric test rig for conducting mixed mode fracture testing of adhesively bonded specimens under changing environmental conditions. Typically, fracture testing of such specimens is directly performed on a dual actuator test rig after artificial ageing in a climate chamber. As the cumulated effects of mechanical and environmental loading cannot simply be decoupled, there is a need for combining a climate chamber with a mechanical loading test rig. The resulting rig enables static and dynamic mechanical testing in an ageing environment combining temperature, humidity and UV effects. The test rig will be used to study and validate mixed mode criteria of, amongst others (T)DCB-samples subjected to extreme combined environmental factors. The introduction of this paper extensively discusses documented research on the effects of moisture, temperature and UV radiation on adhesives and adhesive bonds. Based on the specimens to be tested, the requirements of the test rig are defined. In this paper, the necessity for the combined complete test setup, its design and functionalities are described. In order to demonstrate the accuracy of the test rig concerning measured load and displacement, validation tests are presented. [ABSTRACT FROM AUTHOR]

Background: Although clinical guidelines prioritize the treatment of depression and anxiety in young persons, there is accumulating evidence that the presence of symptoms of borderline personality disorder (BPD) is associated with the limited effectiveness of these standard treatments. These findings stress the need for interventions addressing early-stage BPD in young people with presenting symptoms of anxiety and depressive disorders. The aim of this study is to investigate the (cost-)effectiveness of an early intervention programme for BPD (MBT-early) compared to first-choice psychological treatment for depression and anxiety according to Dutch treatment guidelines (CBT), in adolescents with either depression, anxiety, or both, in combination with early-stage BPD., Methods: This study is a multi-centre randomized controlled trial. A total of 132 adolescents, presenting with either depression, anxiety, or both and significant BPD features will be randomized to either MBT-early or CBT. The severity of BPD, symptoms of depression and anxiety, personality, social and academic functioning, and quality of life will be assessed at baseline, end of treatment, and at 12-, 18-, and 24-month follow-up, along with medical costs and costs of productivity losses for cost-effectiveness analyses., Discussion: This study will provide an empirical evaluation of the potential surplus value of early intervention in young people for whom treatment oriented at common mental disorders like anxiety and depression may be insufficient given their underlying personality problems., Trial Registration: Netherlands Trial Register, NL9569. Registered on June 15, 2021., (© 2024. The Author(s).)

The complete flax stem, which contains shives and technical fibres, has the potential to reduce the cost, energy consumption and environmental impacts of the composite production process if used directly as reinforcement in a polymer matrix. Earlier studies have utilised flax stem as reinforcement in non-bio-based and non-biodegradable matrices not completely exploiting the bio-sourced and biodegradable nature of flax. We investigated the potential of using flax stem as reinforcement in a polylactic acid (PLA) matrix to produce a lightweight, fully bio-based composite with improved mechanical properties. Furthermore, we developed a mathematical approach to predict the material stiffness of the full composite part produced by the injection moulding process, considering a three-phase micromechanical model, where the effects of local orientations are accounted. Injection moulded plates with a flax content of up to 20 V% were fabricated to study the effect of flax shives and full straw flax on the mechanical properties of the material. A 62% increase in longitudinal stiffness was obtained, resulting in a 10% higher specific stiffness, compared to a short glass fibre-reinforced reference composite. Moreover, the anisotropy ratio of the flax-reinforced composite was 21% lower, compared to the short glass fibre material. This lower anisotropy ratio is attributed to the presence of the flax shives. Considering the fibre orientation in the injection moulded plates predicted with Moldflow simulations, a high agreement between experimental and predicted stiffness data was obtained. The use of flax stems as polymer reinforcement provides an alternative to the use of short technical fibres that require intensive extraction and purification steps and are known to be cumbersome to feed to the compounder.

The aim of this study was to investigate the methane (CH4) reducing potential of a combination of prenatal and/or postnatal treatment with coconut oil medium chain fatty acids (CO MCFA) in goat kids. The hypothesis is that influencing rumen function during early life has more chances for success than in the adult life, related to the resilience of the mature rumen microbiota. Forty-eight pregnant does were split into two experimental groups: treated does (D+) received 40 g/d of CO MCFA in a test compound feed, while control does (D-) received a control compound feed, during the last 3 wk of gestation. Twin kids from 10 does of each group were split up into a treated (K+) and nontreated (K-) group, resulting in four experimental groups: D+K+, D+K-, D-K+, and D-K-. The K+ kids received 1.8 mL/d of CO MCFA from birth until 2-wk postweaning (11 wk). Irrespective of treatment, the experimental rearing conditions resulted in absence of rumen protozoa at all sampling times, assessed by quantitative PCR (qPCR). In vitro incubations with rumen fluid at 4 wk old showed 82% lower CH4 production of inoculum from D+K+ kids compared to D-K- kids (P = 0.01). However, this was accompanied by lower total volatile fatty acids (tVFA) production (P = 0.006) and higher hydrogen accumulation (P = 0.008). QPCR targeting the mcrA and rrs genes confirmed a lower abundance of total methanogens (P < 0.02) and total eubacteria (P = 0.02) in D+K+ kids at 4 wk old. Methanogenic activity, as assessed by mcrA expression by RT-qPCR, was also lower in these kids. However, activity did not always reflect methanogen abundance. At 11 and 28 wk old, prenatal and postnatal effects on in vitro fermentation and rumen microbiota disappeared. Nevertheless, lower milk replacer intake in the first 4 wk resulted in reduced BW in K+ kids, persisting until 28 wk of age. Additionally, differences assigned to postnatal treatment were found in papillae density, width, and length in different areas of the rumen, recorded at 28 wk old., Conclusion: prenatal and postnatal supplementation with CO MCFA reduced in vitro CH4 emissions until 4 wk old by depressing methanogen abundance and activity but at the expense of rumen fermentation and eubacterial abundance. Unfortunately, daily gain of K+ kids was suppressed. Some rumen papillae characteristics differed at 28 wk old due to postnatal treatment which ended at 11 wk old, indicating rumen papillary development can be affected by the early-life nutritional circumstances.

Dietary supplementation of docosahexaenoic acid (DHA)-enriched products inhibits the final step of biohydrogenation in the adult rumen, resulting in the accumulation of 18:1 isomers, particularly of trans ( t )-11 18:1. Occasionally, a shift toward the formation of t 10 intermediates at the expense of t 11 intermediates can be triggered. However, whether similar impact would occur when supplementing DHA-enriched products during pregnancy or early life remains unknown. Therefore, the current in vivo study aimed to investigate the effect of a nutritional intervention with DHA in the early life of goat kids on rumen biohydrogenation and microbial community. Delivery of DHA was achieved by supplementing DHA-enriched microalgae (DHA Gold) either to the maternal diet during pregnancy (prenatal) or to the diet of the young offspring (postnatal). At the age of 12 weeks, rumen fluid was sampled for analysis of long-chain fatty acids and microbial community based on bacterial 16S rRNA amplicon sequencing. Postnatal supplementation with DHA-enriched microalgae inhibited the final biohydrogenation step, as observed in adult animals. This resulted particularly in increased ruminal proportions of t 11 18:1 rather than a shift to t 10 intermediates, suggesting that both young and adult goats might be less prone to dietary induced shifts toward the formation of t 10 intermediates, in comparison with cows. Although Butyrivibrio species have been identified as the most important biohydrogenating bacteria, this genus was more abundant when complete biohydrogenation, i.e. 18:0 formation, was inhibited. Blautia abundance was positively correlated with 18:0 accumulation, whereas Lactobacillus spp. Dialister spp. and Bifidobacterium spp. were more abundant in situations with greater t 10 accumulation. Extensive comparisons made between current results and literature data indicate that current associations between biohydrogenation intermediates and rumen bacteria in young goats align with former observations in adult ruminants.

Background: Implant stability testing at various stages of implant therapy by means of resonance frequency analysis is extensively used. The overall measurement outcome is a function of the resulting stiffness of three entities: surrounding bone, bone-implant complex, and implant-Smartpeg complex. The influence of the latter on the overall measurement results is presently unknown. It can be investigated in vitro by use of imbedded implants with mounted Smartpegs. This enables to keep the influence of the two other entities constant and controlled. The purpose of this study is to verify if a laboratory laser Doppler vibrometry technology-based procedure results in comparable ISQ results after calculation of captured resonance frequency spectra by aid of the Osstell algorithm with direct Osstell IDX device measurements., Methods: A laboratory procedure was engineered to record frequency spectra of resin-imbedded test implants with mounted Smartpegs, after electromagnetic excitation with the Osstell IDX device and laser Doppler vibrometry response detection. Fast Fourier transformation data processing of resonance frequency data resulted in determination of a maximum resonance frequency values allowing calculation of implant stability quotient (ISQ) values using the Osstell algorithm., Results: Laboratory-based ISQ values were compared to Osstell IDx device-generated ISQ values for Straumann tissue level, Ankylos, and 3i Certain implant systems. For both systems, a correlation coefficient r = 0.99 was found. Furthermore, a clinically rejectable mean difference of 0.09 ISQ units was noted between both datasets., Conclusions: The proposed laboratory method with the application of the Osstell algorithm for ISQ calculation is appropriate for future studies to in vitro research aspects of resonance frequency analysis implant stability measurements.

We report on what we believe to be a novel classification method for polishing processes that we apply in our laboratory on a regular basis. Two parameters are deduced from the in situ iTIRM (intensity-detecting total-internal-reflection microscopy) measurement method. Contrary to Preston's law, which gives the removal rate, the parameters of the iTIRM process are a measure of the change in surface quality (roughness, subsurface damage, and scratch and dig) and the duration of the polishing process.

Purpose of the Study: We analyzed our experience with the cervical platysma myocutaneous flap and reviewed the pertinent literature. We evaluated the harvesting technique, surgical indications, reliability of the flap, its advantages and drawbacks compared with other reconstruction techniques and assessed survival and local control., Materials and Methods: This retrospective series included 70 patients with a mean 83-month follow-up. All patients had an oral cavity or oropharyngeal carcioma ranging from T1 to T4, N0 to N2b according to the TNM classification. All underwent one-step surgery with unilateral or bilateral type III elective neck dissection, followed by tumor resection, and reconstruction with a cervical platysma myocutaneous flap., Results: Complications related to flap reliability were observed in 17 cases (24.3%): 1 total necrosis (1.4%), 6 partial necrosis (8.6%), and 10 paddle epidermolysis (14.3%). Median survival and local control were 35 and 59 months respectively. Eight out of 55 preoperative N0 patients were histologically N+ (14.5%). No significant difference in risk of metastasis recurrence was evidenced between N0 and N+ patients (p > 0.05)., Discussion: Reconstruction after ablation of oral or oropharyngeal cancer using a cervical platysma myocutaneous flap can be easily combined with an elective neck dissection without increasing the risk of recurrence. The flap must preserve the facial artery and its submental branch and the external jugular vein to ensure reliability. When indications are strictiy applied, the properties of the platysma plasty and the anterolateral cervical situation provide very satisfactory functional and esthetic results.

Hypertriglyceridemia has been reported frequently in patients with hyperuricemia and gout. The current studies have evaluated this relationship. To examine whether hypertriglyceridemia leads to hyperuricemia, IV intralipid was given to three gouty patients. Triglycerides increased from 169 to 700 mg/dl for three hours but caused no change in serum urate level or urine uric acid and oxypurine excretion. We next examined whether high carbohydrate intake increases serum urate and triglyceride levels. Four obese patients were placed on a 2000 kcal/d sucrose diet for seven days. The serum urate increased from 6.3 +/- 1.7 to 7.9 +/- 2.0 mg/dL. The percent uric acid clearance to creatinine clearance decreased from 5.9 +/- 1.3 to the lowest mean value of 3.7 +/- 1.2, while serum triglycerides increased from 106 +/- 33 to 252 +/- 57 mg/dL and blood lactate from 607 +/- 227 to 1167 +/- 381 mumol/L. A 3000 kcal/d glucose diet in four other obese subjects produced no change in serum urate levels but increased lactate and triglyceride levels. During an isocaloric sucrose diet in two normal men, the serum urate level increased from 5.3 and 4.0 to peak values of 9.5 and 7.4 mg/dL. The percent uric acid to creatinine clearance decreased from 5.6 and 6.6 to 2.9 and 3.3. The uric acid turnover did not increase. In three gouty patients the mean serum urate increased from 8.5 +/- 1.5 to 10.6 +/- 1.4 mg/dL following an isocaloric sucrose diet. The urine uric acid excretion increased from 0.30 and 0.25 to 0.37 and 0.38 mg/mg creatinine in two patients.(ABSTRACT TRUNCATED AT 250 WORDS)