Search

T-cell engaging (TCE) bispecific antibodies are potent drugs that trigger the immune system to eliminate cancer cells, but administration can be accompanied by toxic side effects that limit dosing. TCEs function by binding to cell surface receptors on T cells, frequently CD3, with one arm of the bispecific antibody while the other arm binds to cell surface antigens on cancer cells. On-target, off-tumor toxicity can arise when the target antigen is also present on healthy cells. The toxicity of TCEs may be ameliorated through the use of pro-drug forms of the TCE, which are not fully functional until recruited to the tumor microenvironment. This can be accomplished by masking the anti-CD3 arm of the TCE with an autoinhibitory motif that is released by tumor-enriched proteases. Here, we solve the crystal structure of the antigen-binding fragment of a novel anti-CD3 antibody, E10, in complex with its epitope from CD3 and use this information to engineer a masked form of the antibody that can activate by the tumor-enriched protease matrix metalloproteinase 2 (MMP-2). We demonstrate with binding experiments and in vitro T-cell activation and killing assays that our designed prodrug TCE is capable of tumor-selective T-cell activity that is dependent upon MMP-2. Furthermore, we demonstrate that a similar masking strategy can be used to create a pro-drug form of the frequently used anti-CD3 antibody SP34. This study showcases an approach to developing immune-modulating therapeutics that prioritizes safety and has the potential to advance cancer immunotherapy treatment strategies.

While most biological and cellular immunotherapies recognize extracellular targets, T cell receptor (TCR) therapeutics are unique in their ability to recognize the much larger pool of intracellular antigens found on virus-infected or cancerous cells. Recombinant T cell receptor (rTCR)-based therapeutics are gaining momentum both preclinically and clinically highlighted by recent positive phase III human clinical trial results for a TCR/CD3 bifunctional protein in uveal melanoma. Unlike antibody-based T cell engagers whose molecular formats have been widely and extensively evaluated, little data exist describing the putative activities of varied bifunctional formats using rTCRs. Here we generate rTCR/anti-CD3 bifunctionals directed toward NY-ESO-1 or MAGE-A3 with a variety of molecular formats. We show that inducing strong redirected lysis activity against tumors displaying either NY-ESO-1 or MAGE-A3 is highly restricted to small, tandem binding formats with an rTCR/antiCD3 Fab demonstrating the highest potency, rTCR/anti-CD3 single chain variable domain fragment showing similar but consistently weaker potency, and IgG-like or IgG-Fc-containing molecules demonstrating poor activity. We believe this is a universal trait of rTCR bifunctionals, given the canonical TCR/human leukocyte antigen structural paradigm., Competing Interests: Competing interests: All authors are or were employees of Eli Lilly and Company., (© Author(s) (or their employer(s)) 2022. Re-use permitted under CC BY-NC. No commercial re-use. See rights and permissions. Published by BMJ.)

Recombinant T cell receptors (TCRs) can be used to redirect naïve T cells to eliminate virally infected or cancerous cells; however, they are plagued by low stability and uneven expression. Here, we use molecular modeling to identify mutations in the TCR constant domains (Cα/Cβ) that increase the unfolding temperature of Cα/Cβ by 20 °C, improve the expression of four separate α/β TCRs by 3- to 10-fold, and improve the assembly and stability of TCRs with poor intrinsic stability. The stabilizing mutations rescue the expression of TCRs destabilized through variable domain mutation. The improved stability and folding of the TCRs reduces glycosylation, perhaps through conformational stabilization that restricts access to N-linked glycosylation enzymes. The Cα/Cβ mutations enables antibody-like expression and assembly of well-behaved bispecific molecules that combine an anti-CD3 antibody with the stabilized TCR. These TCR/CD3 bispecifics can redirect T cells to kill tumor cells with target HLA/peptide on their surfaces in vitro.

Bispecific antibodies (BsAbs), which target two antigens or epitopes, incorporate the specificities and properties of two distinct monoclonal antibodies (mAbs) into a single molecule. As such, BsAbs can elicit synergistic activities and provide the capacity for enhanced therapeutic efficacy and/or safety compared to what can be achieved with conventional monospecific IgGs. There are many building block formats to generate BsAbs and Trispecific antibodies (TsAbs) based on combining the antigen recognition domains of monoclonal antibodies (mAbs). This review describes the many and varied antibody-based building blocks used to achieve multivalency and multispecificity. These diverse building blocks provide opportunities to tailor the design of BsAbs and TsAbs to match the desired applications., (Copyright © 2018. Published by Elsevier Inc.)

The clinical success of monoclonal antibodies to treat diseases across nearly every therapeutic area has spurred advances in bispecific antibody technology with the goal of cost-effectively combining various therapies or providing novel mechanisms for disease intervention. Many novel bispecific antibodies are now in clinical development or the late pre-clinical setting. A new horizon exists for novel molecular entities with the ability to bind three or more antigens. Here we describe the production and characterization of novel trispecific antibody-like proteins denoted 'OrthoTsAbs' that self-assemble through the application of engineered antibody domain interfaces.

The use of bispecific antibodies (BsAbs) to treat human diseases is on the rise. Increasingly complex and powerful therapeutic mechanisms made possible by BsAbs are spurring innovation of novel BsAb formats and methods for their production. The long-lived in vivo pharmacokinetics, optimal biophysical properties and potential effector functions of natural IgG monoclonal (and monospecific) antibodies has resulted in a push to generate fully IgG BsAb formats with the same quaternary structure as monoclonal IgGs. The production of fully IgG BsAbs is challenging because of the highly heterogeneous pairing of heavy chains (HCs) and light chains (LCs) when produced in mammalian cells with two IgG HCs and two LCs. A solution to the HC heterodimerization aspect of IgG BsAb production was first discovered two decades ago; however, addressing the LC mispairing issue has remained intractable until recently. Here, we use computational and rational engineering to develop novel designs to the HC/LC pairing issue, and particularly for κ LCs. Crystal structures of these designs highlight the interactions that provide HC/LC specificity. We produce and characterize multiple fully IgG BsAbs using these novel designs. We demonstrate the importance of specificity engineering in both the variable and constant domains to achieve robust HC/LC specificity within all the BsAbs. These solutions facilitate the production of fully IgG BsAbs for clinical use., (© 2017 The Protein Society.)

IgG bispecific antibodies (BsAbs) represent one of the preferred formats for bispecific antibody therapeutics due to their native-like IgG properties and their monovalent binding to each target. Most reported studies utilized transient expression in HEK293 cells to produce BsAbs. However, the expression of biotherapeutic molecules using stable CHO cell lines is commonly used for biopharmaceutical manufacturing. Unfortunately, limited information is available in the scientific literature on the expression of BsAbs in CHO cell lines. In this study we describe an alternative approach to express the multiple components of IgG BsAbs using a single plasmid vector (quad vector). This single plasmid vector contains both heavy chain genes and both light chain genes required for the expression and assembly of the IgG BsAb, along with a selectable marker. We expressed, purified, and characterized four different IgG BsAbs or "hetero-mAbs" using transient CHO expression and stable CHO minipools. Transient CHO titers ranged from 90 to 160 mg/L. Stable CHO titers ranged from 0.4 to 2.3 g/L. Following a simple Protein A purification step, the percentage of correctly paired BsAbs ranged from 74% to 98% as determined by mass spectrometry. We also found that information generated from transient CHO expression was similar to information generated using stable CHO minipools. In conclusion, the quad vector approach represents a simple, but effective, alternative approach for the generation of IgG BsAbs in both transient CHO and stable CHO expression systems. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:469-477, 2017., (© 2017 American Institute of Chemical Engineers.)

Glycoprofiling recombinant proteins expressed and secreted from mammalian cells is key to understanding their interactions with glycoprotein receptors in vivo. Recently, recombinant T cell receptors (TCRs) are being considered as therapeutic moieties. Here we present a mass spectrometry based protocol with a "bottom up" approach to characterize glycosylation in recombinant fusion proteins with α/β TCR constant domains expressed in mammalian cells. The protocol focuses on using peptide mass mapping and mass spectrometry for N-linked glycan profiling, including analyses of site occupancy, glycan heterogeneity, and possible glycan compositions and structures.

IgG antibodies are multi-domain proteins with complex inter-domain interactions. Human IgG heavy chains (HCs) associate with light chains (LCs) of the κ or λ isotype to form mature antibodies capable of binding antigen. The HC/LC interaction involves 4 domains: VH and CH1 from the HC and VL and CL from the LC. Human Fabs with κ LCs have been well characterized for their unfolding behaviors and demonstrate a significant level of cooperativity and stabilization when all 4 domains are intact. Very little is known regarding the thermodynamic properties of human Fabs with λ LCs. Here, we dissect the domain contributions to Fab stability for both κ and λ LC-containing Fabs. We find the cooperativity of unfolding between the constant domains, CH1/Cλ, and variable domains, VH/Vλ, within λ LC-containing Fabs is significantly weaker than that of κ LC-containing Fabs. The data suggests there may not be an evolutionary necessity for strong variable/constant domain cooperativity within λ LC-containing Fabs. After investigating the biophysical properties of Fabs with mismatched variable and constant domain subunits (e.g., VH/Vκ paired with CH1/Cλ or T cell receptor Cα/Cβ), the major role of the constant domains for both κ- and λ-containing Fabs may be to reduce the hydrophobic exposure at the VH/VL interface. Even though Fabs with these non-native pairings were thermodynamically less stable, they secreted well from mammalian cells as well behaved monodisperse proteins, which was in contrast to what was observed with the VH/Vκ and VH/Vλ scFvs that secreted as a mixture of monomer and aggregates.

A challenge in the structure-based design of specificity is modeling the negative states, i.e., the complexes that you do not want to form. This is a difficult problem because mutations predicted to destabilize the negative state might be accommodated by small conformational rearrangements. To overcome this challenge, we employ an iterative strategy that cycles between sequence design and protein docking in order to build up an ensemble of alternative negative state conformations for use in specificity prediction. We have applied our technique to the design of heterodimeric CH3 interfaces in the Fc region of antibodies. Combining computationally and rationally designed mutations produced unique designs with heterodimer purities greater than 90%. Asymmetric Fc crystallization was able to resolve the interface mutations; the heterodimer structures confirmed that the interfaces formed as designed. With these CH3 mutations, and those made at the heavy-/light-chain interface, we demonstrate one-step synthesis of four fully IgG-bispecific antibodies., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Immunoglobulins and T cell receptors (TCRs) share common sequences and structures. With the goal of creating novel bispecific antibodies (BsAbs), we generated chimeric molecules, denoted IgG_TCRs, where the Fv regions of several antibodies were fused to the constant domains of the α/β TCR. Replacing CH1 with Cα and CL with Cβ, respectively, was essential for achieving at least partial heavy chain/light chain assembly. Further optimization of the linker regions between the variable and constant domains, as well as replacement of the large FG loop of Cβ with a canonical β-turn, was necessary to consistently obtain full heavy chain/light chain assembly. The optimized IgG_TCR molecules were evaluated biophysically and shown to maintain the binding properties of their parental antibodies. A few BsAbs were generated by co-expressing native Fabs and IgG_TCR Fabs within the same molecular construct. We demonstrate that the IgG_TCR designs steered each of the light chains within the constructs to specifically pair with their cognate heavy chain counterparts. We did find that even with complete constant domain specificity between the CH1/CL and Cα/Cβ domains of the Fabs, strong variable domain interactions can dominate the pairing specificity and induce some mispairing. Overall, the IgG_TCR designs described here are a first step toward the generation of novel BsAbs that may be directed toward the treatment of multi-faceted and complex diseases.

A myriad of innovative bispecific antibody (BsAb) platforms have been reported. Most require significant protein engineering to be viable from a development and manufacturing perspective. Single-chain variable fragments (scFvs) and diabodies that consist only of antibody variable domains have been used as building blocks for making BsAbs for decades. The drawback with Fv-only moieties is that they lack the native-like interactions with CH1/CL domains that make antibody Fab regions stable and soluble. Here, we utilize a redesigned Fab interface to explore 2 novel Fab-based BsAbs platforms. The redesigned Fab interface designs limit heavy and light chain mixing when 2 Fabs are co-expressed simultaneously, thus allowing the use of 2 different Fabs within a BsAb construct without the requirement of one or more scFvs. We describe the stability and activity of a HER2×HER2 IgG-Fab BsAb, and compare its biophysical and activity properties with those of an IgG-scFv that utilizes the variable domains of the same parental antibodies. We also generated an EGFR × CD3 tandem Fab protein with a similar format to a tandem scFv (otherwise known as a bispecific T cell engager or BiTE). We show that the Fab-based BsAbs have superior biophysical properties compared to the scFv-based BsAbs. Additionally, the Fab-based BsAbs do not simply recapitulate the activity of their scFv counterparts, but are shown to possess unique biological activity.

A number of light and heavy chain canonical residue core redesigns were made in a therapeutic antibody (AQC2, anti-VLA1) Fab to explore the consequences to binding affinity and stability. These positions are all loop supporting, primarily CDR1 residues which do not directly contact the antigen. Structure based methods were used with and without consensus sequence information. 30 constructs were made, 24 expressed, and 70% of the designs using consensus sequence information retained binding affinity. Some success maintaining stability with more extreme redesigns suggests a surprising tolerance to mutation, though it often comes at the cost of loss of binding affinity and presumed loop conformation changes. In concordance with the expected need to present an ordered surface for binding, a relationship between decreased affinity and decreased stability was observed. Overpacking the core tends to destabilize the molecule and should be avoided., (Copyright © 2013 Elsevier Inc. All rights reserved.)

Robust generation of IgG bispecific antibodies has been a long-standing challenge. Existing methods require extensive engineering of each individual antibody, discovery of common light chains, or complex and laborious biochemical processing. Here we combine computational and rational design approaches with experimental structural validation to generate antibody heavy and light chains with orthogonal Fab interfaces. Parental monoclonal antibodies incorporating these interfaces, when simultaneously co-expressed, assemble into bispecific IgG with improved heavy chain-light chain pairing. Bispecific IgGs generated with this approach exhibit pharmacokinetic and other desirable properties of native IgG, but bind target antigens monovalently. As such, these bispecific reagents may be useful in many biotechnological applications.

Tyro3, a member of the Tyro3/Axl/Mer (TAM) family of receptor tyrosine kinases, has emerged as a potential oncogene in melanoma. Here, we confirm that Tyro3 is specifically overexpressed in primary melanoma samples and show that Tyro3 is expressed at varying levels in numerous melanoma cell lines. Short hairpin RNA-mediated knockdown of Tyro3 led to significant cell death via apoptotic mechanisms in nearly all melanoma cell lines tested, regardless of the BRAF or NRAS mutation status or co-expression of Axl and/or Mer. We generated soluble and monomeric versions of the human Tyro3 extracellular domain and human Gas6 for affinity measurements and correlated these values with the level of Gas6 required to induce Tyro3 signaling in cellular assays. Calcium was critical for the correct folding of Gas6 and its binding to Tyro3. In melanoma cell lines, Gas6 induced Tyro3 phosphorylation and downstream Akt phosphorylation without apparent effects on Erk. We generated monoclonal antibodies (mAbs) against Tyro3 to examine their effect on survival signaling in melanoma cell lines. The mAbs generated against Tyro3 included nonligand blockers, partial blockers, and competitive ligand blockers. A number of weak and partial ligand blockers (all recognizing the Tyro3 Ig domains) were the most effective at blocking ligand-mediated downstream signaling of Tyro3. Overall, these data indicate that Tyro3 may confer increased survival signals in melanoma cells and can be stymied using inhibitory mAbs. These mAbs may be useful for further investigations of the role of Tyro3 in melanoma.

The ability to generate and design antibodies recognizing specific targets has revolutionized the pharmaceutical industry and medical imaging. Engineering antibody therapeutics in some cases requires modifying their constant domains to enable new and altered interactions. Engineering novel specificities into antibody constant domains has proved challenging due to the complexity of inter-domain interactions. Covarying networks of residues that tend to cluster on the protein surface and near binding sites have been identified in some proteins. However, the underlying role these networks play in the protein resulting in their conservation remains unclear in most cases. Resolving their role is crucial, because residues in these networks are not viable design targets if their role is to maintain the fold of the protein. Conversely, these networks of residues are ideal candidates for manipulating specificity if they are primarily involved in binding, such as the myriad interdomain interactions maintained within antibodies. Here, we identify networks of evolutionarily-related residues in C-class antibody domains by evaluating covariation, a measure of propensity with which residue pairs vary dependently during evolution. We computationally test whether mutation of residues in these networks affects stability of the folded antibody domain, determining their viability as design candidates. We find that members of covarying networks cluster at domain-domain interfaces, and that mutations to these residues are diverse and frequent during evolution, precluding their importance to domain stability. These results indicate that networks of covarying residues exist in antibody domains for functional reasons unrelated to thermodynamic stability, making them ideal targets for antibody design., (Copyright © 2013 Wiley Periodicals, Inc.)

Engineered antibodies are emerging as a promising class of therapeutic biomolecules, as well as having applications in medical research. Knowledge on conserved functional and structural regions within antibody domains is imperative in order to rationally design stable and specific antibodies. Of particular interest for the design of therapeutics are antibody variable and constant domains, which are responsible for antigen binding and immune response. These antibody domains are part of the larger immunoglobulin (Ig) V-class and C-class families, respectively. We find that, although both classes belong to the Ig-fold superfamily, the sets of conserved residue positions and identities differ between these classes. We exploit these evolutionary differences to derive a metric based on sequence positional entropy that distinguishes C-class from V-class sequences utilizing only sequence information. By distinguishing different domain families using sequence information alone, we enable the application of domain-specific design strategies without the need for secondary or tertiary structural information., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Escherichia coli (E. coli) is the most commonly used organism for expressing antibody fragments such as single chain antibody Fvs (scFvs). Previously, we have utilized E. coli to express well-folded scFvs for characterization and engineering purposes with the goal of using these engineered proteins as building blocks for generating IgG-like bispecific antibodies (BsAbs). In the study, described here, we observed a significant difference in the secondary structure of an scFv produced in E. coli and the same scFv expressed and secreted from chinese hamster ovary (CHO) cells as part of a BsAb. We devised a proteolytic procedure to separate the CHO-derived scFv from its antibody-fusion partner and compared its properties with those of the E. coli-derived scFv. In comparison to the CHO-derived scFv, the E. coli-derived scFv was found trapped in a misfolded, but monomeric state that was stable for months at 4 °C. The misfolded state bound antigen in a heterogeneous fashion that included non-specific binding, which made functional characterization challenging. This odd incidence of obtaining a misfolded scFv from bacteria suggests careful characterization of the folded properties of bacterially expressed scFvs is warranted if anomalous issues with antigen-binding or non-specificity occur during an engineering campaign. Additionally, our proteolytic methodology for obtaining significant levels of intact scFvs from highly expressed IgG-like antibody proteins serves as a robust method for producing scFvs in CHO without the use of designed cleavage motifs., (Copyright © 2011 Elsevier Inc. All rights reserved.)

The use of monoclonal antibodies (mAbs) has become a general approach for specifically targeting and treating human disease. In oncology, the therapeutic utility of mAbs is usually evaluated in the context of treatment with standard of care, as well as other small molecule targeted therapies. Many anti-cancer antibody modalities have achieved validation, including the targeting of growth factor and angiogenesis pathways, the induction of tumor cell killing or apoptosis, and the blocking of immune inhibitory mechanisms to stimulate anti-tumor responses. But, as with other targeted therapies, few antibodies are curative because of biological complexities that underlie tumor formation and redundancies in molecular pathways that enable tumors to adapt and show resistance to treatment. This review discusses the combinations of antibody therapeutics that are emerging to improve efficacy and durability within a specific biological mechanism (e.g., immunomodulation or the inhibition of angiogenesis) and across multiple biological pathways (e.g., inhibition of tumor growth and induction of tumor cell apoptosis).

The structural features of the asymmetric activated states of the insulin receptor family are still poorly understood. We investigated hydrogen/deuterium (H/D)-exchange within the extracellular domain of the type-I insulin-like growth factor receptor (IGF-1R) in the absence and presence of IGF-1 (active state) and in the presence of antibody inhibitors (inactive state). Near complete coverage of the 210 kDa receptor sequence was obtained by mass mapping of proteolytically derived peptides at all H/D-exchange time points. The data provide details regarding solvent exposure and dynamics across the extracellular region as well as conformational changes induced by activation or inactivation. Multiple peptides, distant in structure, individually demonstrated two distinct H/D-exchange rates, suggesting that each of these peptides exists in two separate environments in IGF-1R. The dual-exchange behavior of these peptides was enhanced on ligand binding and eliminated on inhibitor binding, clearly associating these regions with active state asymmetry and enabling them to serve as reporters of receptor activity., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

The epidermal growth factor receptor (EGFR) and the type I insulin-like growth factor receptor (IGF-1R) are two cell surface receptor tyrosine kinases known to cooperate to promote tumor progression and drug resistance. Combined blockade of EGFR and IGF-1R has shown improved anti-tumor activity in preclinical models. Here, we report the characterization of a stable IgG-like bispecific antibody (BsAb) dual-targeting EGFR and IGF-1R that was developed for cancer therapy. The BsAb molecule (EI-04), constructed with a stability-engineered single chain variable fragment (scFv) against IGF-1R attached to the carboxyl-terminus of an IgG against EGFR, displays favorable biophysical properties for biopharmaceutical development. Biochemically, EI-04 bound to human EGFR and IGF-1R with sub nanomolar affinity, co-engaged the two receptors simultaneously, and blocked the binding of their respective ligands with similar potency compared to the parental monoclonal antibodies (mAbs). In tumor cells, EI-04 effectively inhibited EGFR and IGF-1R phosphorylation, and concurrently blocked downstream AKT and ERK activation, resulting in greater inhibition of tumor cell growth and cell cycle progression than the single mAbs. EI-04, likely due to its tetravalent bispecific format, exhibited high avidity binding to BxPC3 tumor cells co-expressing EGFR and IGF-1R, and consequently improved potency at inhibiting IGF-driven cell growth over the mAb combination. Importantly, EI-04 demonstrated enhanced in vivo anti-tumor efficacy over the parental mAbs in two xenograft models, and even over the mAb combination in the BxPC3 model. Our data support the clinical investigation of EI-04 as a superior cancer therapeutic in treating EGFR and IGF-1R pathway responsive tumors.

Bispecific antibodies (BsAbs) target multiple epitopes on the same molecular target or different targets. Although interest in BsAbs has persisted for decades, production of stable and active BsAbs has hindered their clinical evaluation. Here, we describe the production and characterization of tetravalent IgG-like BsAbs that combine the activities of allosteric and competitive inhibitors of the type-I insulin-like growth factor receptor (IGF-1R). The BsAbs, which were engineered for thermal stability, express well, demonstrate favorable biophysical properties, and recognize both epitopes on IGF-1R. Only one BsAb with a unique geometry, denoted BIIB4-5scFv, was capable of engaging all four of its binding arms simultaneously. All the BsAbs (especially BIIB4-5scFv) demonstrated enhanced ligand blocking over the single monoclonal antibodies (mAbs), particularly at high ligand concentrations. The pharmacokinetic profiles of two IgG-like BsAbs were tested in nude mice and shown to be comparable with that of the parental mAbs. The BsAbs, especially BIIB4-5scFv, demonstrated an improved ability to reduce the growth of multiple tumor cell lines and to inhibit ligand-induced IGF-1R signaling in tumor cells over the parental mAbs. BIIB4-5scFv also led to superior tumor growth inhibition over its parental mAbs in vivo. In summary, BsAbs that bridge multiple inhibitory mechanisms against a single target may generally represent a more effective strategy for intervention in oncology or other indications compared with traditional mAb therapy.

The insulin-like growth factor-I receptor (IGF-IR) is a cell surface receptor tyrosine kinase that mediates cell survival signaling and supports tumor progression in multiple tumor types. We identified a spectrum of inhibitory IGF-IR antibodies with diverse binding epitopes and ligand-blocking properties. By binding distinct inhibitory epitopes, two of these antibodies, BIIB4 and BIIB5, block both IGF-I and IGF-II binding to IGF-IR using competitive and allosteric mechanisms, respectively. Here, we explored the inhibitory effects of combining BIIB4 and BIIB5. In biochemical assays, the combination of BIIB4 and BIIB5 improved both the potency and extent of IGF-I and IGF-II blockade compared with either antibody alone. In tumor cells, the combination of BIIB4 and BIIB5 accelerated IGF-IR downregulation and more efficiently inhibited IGF-IR activation as well as downstream signaling, particularly AKT phosphorylation. In several carcinoma cell lines, the antibody combination more effectively inhibited ligand-driven cell growth than either BIIB4 or BIIB5 alone. Notably, the enhanced tumor growth-inhibitory activity of the BIIB4 and BIIB5 combination was much more pronounced at high ligand concentrations, where the individual antibodies exhibited substantially reduced activity. Compared with single antibodies, the BIIB4 and BIIB5 combination also significantly further enhanced the antitumor activity of the epidermal growth factor receptor inhibitor erlotinib and the mTOR inhibitor rapamycin. Moreover, in osteosarcoma and hepatocellular carcinoma xenograft models, the BIIB4 and BIIB5 combination significantly reduced tumor growth to a greater degree than each single antibody. Taken together, our results suggest that targeting multiple distinct inhibitory epitopes on IGF-IR may be a more effective strategy of affecting the IGF-IR pathway in cancer.

Single-chain Fvs (scFvs) are commonly used building blocks for creating engineered diagnostic and therapeutic antibody molecules. Bispecific antibodies (BsAbs) hold particular interest due to their ability to simultaneously bind and engage two distinct targets. We describe a technology for producing stable, scalable IgG-like bispecific and multivalent antibodies based on methods for rapidly engineering thermally stable scFvs. Focused libraries of mutant scFvs were designed using a combination of sequence-based statistical analyses and structure-, and knowledge-based methods. Libraries encoding these designs were expressed in E. coli and culture supernatants-containing soluble scFvs screened in a high-throughput assay incorporating a thermal challenge prior to an antigen-binding assay. Thermally stable scFvs were identified that retain full antigen-binding affinity. Single mutations were found that increased the measured T(m) of either the V(H) or V(L) domain by as much as 14 degrees C relative to the wild-type scFv. Combinations of mutations further increased the T(m) by as much as an additional 12 degrees C. Introduction of a stability-engineered scFv as part of an IgG-like BsAb enabled scalable production and purification of BsAb with favorable biophysical properties.

The pathogenicity of Clostridium difficile (C. difficile) is mediated by the release of two toxins, A and B. Both toxins contain large clusters of repeats known as cell wall binding (CWB) domains responsible for binding epithelial cell surfaces. Several murine monoclonal antibodies were generated against the CWB domain of toxin A and screened for their ability to neutralize the toxin individually and in combination. Three antibodies capable of neutralizing toxin A all recognized multiple sites on toxin A, suggesting that the extent of surface coverage may contribute to neutralization. Combination of two noncompeting antibodies, denoted 3358 and 3359, enhanced toxin A neutralization over saturating levels of single antibodies. Antibody 3358 increased the level of detectable CWB domain on the surface of cells, while 3359 inhibited CWB domain cell surface association. These results suggest that antibody combinations that cover a broader epitope space on the CWB repeat domains of toxin A (and potentially toxin B) and utilize multiple mechanisms to reduce toxin internalization may provide enhanced protection against C. difficile-associated diarrhea.

Engineered antibodies are a large and growing class of protein therapeutics comprising both marketed products and many molecules in clinical trials in various disease indications. We investigated naturally conserved networks of amino acids that support antibody V(H) and V(L) function, with the goal of generating information to assist in the engineering of robust antibody or antibody-like therapeutics. We generated a large and diverse sequence alignment of V-class Ig-folds, of which V(H) and V(L) domains are family members. To identify conserved amino acid networks, covariations between residues at all possible position pairs were quantified as correlation coefficients (phi-values). We provide rosters of the key conserved amino acid pairs in antibody V(H) and V(L) domains, for reference and use by the antibody research community. The majority of the most strongly conserved amino acid pairs in V(H) and V(L) are at or adjacent to the V(H)-V(L) interface suggesting that the ability to heterodimerize is a constraining feature of antibody evolution. For the V(H) domain, but not the V(L) domain, residue pairs at the variable-constant domain interface (V(H)-C(H)1 interface) are also strongly conserved. The same network of conserved V(H) positions involved in interactions with both the V(L) and C(H)1 domains is found in camelid V(HH) domains, which have evolved to lack interactions with V(L) and C(H)1 domains in their mature structures; however, the amino acids at these positions are different, reflecting their different function. Overall, the data describe naturally occurring amino acid networks in antibody Fv regions that can be referenced when designing antibodies or antibody-like fragments with the goal of improving their biophysical properties.

Therapeutic antibodies directed against the type 1 insulin-like growth factor receptor (IGF-1R) have recently gained significant momentum in the clinic because of preliminary data generated in human patients with cancer. These antibodies inhibit ligand-mediated activation of IGF-1R and the resulting down-stream signaling cascade. Here we generated a panel of antibodies against IGF-1R and screened them for their ability to block the binding of both IGF-1 and IGF-2 at escalating ligand concentrations (>1 microm) to investigate allosteric versus competitive blocking mechanisms. Four distinct inhibitory classes were found as follows: 1) allosteric IGF-1 blockers, 2) allosteric IGF-2 blockers, 3) allosteric IGF-1 and IGF-2 blockers, and 4) competitive IGF-1 and IGF-2 blockers. The epitopes of representative antibodies from each of these classes were mapped using a purified IGF-1R library containing 64 mutations. Most of these antibodies bound overlapping surfaces on the cysteine-rich repeat and L2 domains. One class of allosteric IGF-1 and IGF-2 blocker was identified that bound a separate epitope on the outer surface of the FnIII-1 domain. Using various biophysical techniques, we show that the dual IGF blockers inhibit ligand binding using a spectrum of mechanisms ranging from highly allosteric to purely competitive. Binding of IGF-1 or the inhibitory antibodies was associated with conformational changes in IGF-1R, linked to the ordering of dynamic or unstructured regions of the receptor. These results suggest IGF-1R uses disorder/order within its polypeptide sequence to regulate its activity. Interestingly, the activity of representative allosteric and competitive inhibitors on H322M tumor cell growth in vitro was reflective of their individual ligand-blocking properties. Many of the antibodies in the clinic likely adopt one of the inhibitory mechanisms described here, and the outcome of future clinical studies may reveal whether a particular inhibitory mechanism leads to optimal clinical efficacy.

Bispecific antibodies (BsAbs) represent an emerging class of biologics that achieve dual targeting with a single agent. Recombinant DNA technologies have facilitated a variety of creative bispecific designs with many promising therapeutic applications; however, practical methods for producing high quality BsAbs that have good product stability, long serum half-life, straightforward purification, and scalable production have largely been limiting. Here we describe a protein-engineering approach for producing stable, scalable tetravalent IgG-like BsAbs. The stability-engineered IgG-like BsAb was envisioned to target and crosslink two TNF family member receptors, TRAIL-R2 (TNF-Related Apoptosis Inducing Ligand Receptor-2) and LTbetaR (Lymphotoxin-beta Receptor), expressed on the surface of epithelial tumor cells with the goal of triggering an enhanced anti-tumor effect. Our IgG-like BsAbs consists of a stability-engineered anti-LTbetaR single chain Fv (scFv) genetically fused to either the N- or C-terminus of the heavy chain of a fulllength anti-TRAIL-R2 IgG1 monoclonal antibody. Both N- or C-terminal BsAbs were active in inhibiting tumor cell growth in vitro, and with some cell lines demonstrated enhanced activity relative to the combination of parental Abs. Pharmacokinetic studies in mice revealed long serum half-lives for the BsAbs. In murine tumor xenograft models, therapeutic treatment with the BsAbs resulted in reduction in tumor volume either comparable to or greater than the combination of parental antibodies, indicating that simultaneously targeting and cross-linking receptor pairs is an effective strategy for treating tumor cells. These studies support that stability-engineering is an enabling step for producing scalable IgG-like BsAbs with properties desirable for biopharmaceutical development.

The poor biophysical properties of antibody fragments such as scFvs and diabodies can preclude their use as therapeutic agents. The non-ideal biophysical properties and insufficient thermal stability of antibody fragments often leads to poor expression, poor solubility, and a predisposition of the proteins to aggregate. We have developed a general platform for engineering stability into antibody fragments. By promoting Escherichia coli cultures to secrete scFvs directly into growth media, automated screening methods can be applied to empirically evaluate multiple stability design strategies including rational, sequence-based, and structure-based designs. Once stabilized, these antibody fragments demonstrate improved expression and durability during purification, handling, and storage. Stabilized antibody fragments can also be used as building blocks for multivalent or bispecific antibody-like molecules.

Antibodies are highly soluble, multidomain proteins that are well suited for biopharmaceutical development; however, engineering antibodies to perform novel activities or to have enhanced clinical utility can have a detrimental effect on their biophysical properties. Various innovative designs, such as single-chain variable fragments (scFvs) and domain antibodies (dAbs), have been utilized to obtain the antigen-binding properties of natural antibodies, while using a minimal amount of the polypeptide sequence of an antibody. These designs can be used for generating diverse antibody libraries to support discovery and optimization and also serve as excellent building blocks for constructing more complex protein therapeutics, such as bispecific antibodies. However, engineered antibody-like proteins, including scFvs, are often unstable and prone to aggregation, compromising both protein production and quality. Research over the past few years has enhanced our understanding of how interdomain interactions within antibodies contribute to protein stability. This knowledge and sustained research to develop methods for modifying antibody fragments to improve stability have begun to have a positive impact on the quality of antibody libraries for discovery purposes and the viability of highly engineered proteins, such as bispecific antibodies, as therapeutics.

Although the functional properties of IgGs are well known, little has been published concerning the stability of whole IgG molecules. Stability is, however, a requirement for the development of antibodies for therapeutic or diagnostic applications. The hypervariable antigen-binding region (Fv) is responsible for stability variations between IgGs of identical subclass. To determine the range of stabilities that may be expected for human(ized) antibodies, differential scanning calorimetry was performed on 17 human(ized) antibodies from various in-house programs. The antigen-binding fragments (Fabs) of these antibodies exhibited thermal unfolding transitions with midpoints (T(M)s) varying from 57 to 82 degrees C. Antibodies with very low Fab stabilities were found to aggregate and express poorly. Fab instability was often associated with high levels of uncommonly observed amino acids or CDR loop lengths particularly within the variable heavy chain domain. Overall, the study provides a thermostability range for IgGs and suggests possible stability guidelines for developing antibody diagnostics or therapeutics.

The interaction between IgE-Fc (Fcepsilon) and its high affinity receptor FcepsilonRI on the surface of mast cells and basophils is a key event in allergen-induced allergic inflammation. Recently, several therapeutic strategies have been developed based on this interaction, and some include Fcepsilon-containing moieties. Unlike well characterized IgG therapeutics, the stability and folding properties of IgE are not well understood. Here, we present comparative biophysical analyses of the pH stability and thermostability of Fcepsilon and IgG1-Fc (Fcgamma). Fcepsilon was found to be significantly less stable than Fcgamma under all pH and NaCl conditions tested. Additionally, the Cepsilon3Cepsilon4 domains of Fcepsilon were shown to become intrinsically unfolded at pH values below 5.0. The interaction between Fcepsilon and an Fcgamma-FcepsilonRIalpha fusion protein was studied between pH 4.5 and 7.4 using circular dichroism and a combination of differential scanning calorimetry and isothermal titration calorimetry. Under neutral pH conditions, the apparent affinity of Fcepsilon for the dimeric fusion protein was extremely high compared with published values for the monomeric receptor (KD < 10(-12) m). Titration to pH 6.0 did not significantly change the binding affinity, and titration to pH 5.5 only modestly attenuated affinity. At pH values below 5.0, the receptor binding domains of Fcepsilon unfolded, and interaction of Fcepsilon with the Fcgamma-FcepsilonRIalpha fusion protein was abrogated. The unusual pH sensitivity of Fcepsilon may play a role in antigen-dependent regulation of receptor-bound, non-circulating IgE.

The recombinant expression of immunoglobulin domains, Fabs and scFvs in particular, in Escherichia coli can vary significantly from antibody to antibody. We hypothesized that poor Fab expression is often linked to poor intrinsic stability. To investigate this further, we applied a novel approach for stabilizing a poorly expressing anti-tetanus toxoid human Fab with a predisposition for being misfolded and non-functional. Forty-five residues within the Fab were chosen for saturation mutagenesis based on residue frequency analysis and positional entropy calculations. Using automated screening, we determined the approximate midpoint temperature of thermal denaturation (TM) for over 4000 library members with a maximum theoretical diversity of 855 unique mutations. This dataset led to the identification of 11 residue positions, primarily in the Fv region, which when mutated enhanced Fab stability. By combining these mutations, the TM of the Fab was increased to 92 degrees C. Increases in Fab stability correlated with higher expressed Fab yields and higher levels of properly folded and functional protein. The mutations were selected based on their ability to increase the apparent stability of the Fab and therefore the exact mechanism behind the enhanced expression in E.coli remains undefined. The wild-type and two optimized Fabs were converted to an IgG1 format and expressed in mammalian cells. The optimized IgG1 molecules demonstrated identical gains in thermostability compared to the Fabs; however, the expression levels were unaffected suggesting that the eukaryotic secretion system is capable of correcting potential folding issues prevalent in E.coli. Overall, the results have significant implications for the bacterial expression of functional antibody domains as well as for the production of stable, high affinity therapeutic antibodies in mammalian cells.

Clostridium difficile (C.difficile) is a nosocomially acquired intestinal bacillus which can cause chronic diarrhea and life-threatening colitis. The pathogenic effects of the bacillus are mediated by the release of two toxins, A and B. The C-terminal portions of both toxins are composed of 20 and 30 residue repeats known as cell wall binding (CWB) domains. We have cloned and expressed the CWB-domains of toxins A and B and several truncated CWB-domain constructs to investigate their structure and function. The smallest CWB-domain that folded in a cooperative manner was an 11 repeat construct of toxin A. This differentiates the C-terminal domains of toxins A and B from the CWB-domain of Streptococcus pneumoniae LytA, which only requires six repeats to fold. The 11 repeat toxin A construct bound Ca2+ directly with millimolar affinity and interacted with mammalian cell surfaces in a concentration and Ca2+-dependent fashion. Millimolar Ca2+ levels also accelerated toxin mediated CHO cell killing in an in vitro cell assay. Together, the data suggest a role for extracellular Ca2+ in the sensitization of toxin A/cell-surface interactions.

In an attempt to enhance the overall assembly, yield and half-life of recombinant antibody proteins, we have cloned and expressed several IgG1 C(H)3 domains and examined their folding/refolding characteristics. We utilized a cytoplasmic bacterial expression system with a thioredoxin reductase knock-out strain of BL21(DE3) to produce bovine, murine and human C(H)3. Under identical conditions, expression of bovine C(H)3 resulted consistently in the highest yields of properly folded/oxidized protein. Circular dichroism and fluorescence experiments demonstrate that oxidized bovine and murine C(H)3 have surprisingly similar structures and stabilities, considering the marginal sequence conservation between the two molecules. Residue frequency analysis using a limited data set of 36 unique Fc sequences originating from 19 different mammalian species targeted five specific sites for optimization within bovine C(H)3. Combination of three of these mutants increased the thermal stability of the molecule to 86 degrees C. Comparison of this approach to similar studies using larger sequence databases and/or different selection criteria suggests sequence database design can increase the success rate for identifying residue sites worth optimizing. This optimized C(H)3 domain can be used as a particularly stable platform for functional design and can be grafted into full-length antibody sequences to enhance their thermodynamic parameters and shelf-life.

Among the most common interaction motifs between nuclear proteins is the recognition of one or more amphipathic helices. In an effort to determine principles behind this recognition, we have investigated the interaction between the p160 coactivator protein ACTR and the ACTR-binding domain of the CREB-binding protein, CBP. The two proteins use relatively small portions of their primary sequences to form a single synergistically folded domain consisting of six intertwined alpha-helices, three from each protein. Neither of the component polypeptides forms a cooperatively folded domain in isolation. However, a considerable amount of residual secondary structure remains in the isolated CBP domain according to CD spectroscopy. Chemical denaturation, differential scanning calorimetry, and ANS binding experiments demonstrate that the isolated CBP domain is not entirely unfolded but forms a helical state with the characteristics of a molten globule. Mutations probing the functional and energetic significance of a buried intermolecular Arg-Asp salt bridge in the interface of the protein complex suggest that these residues are tuned for functional discrimination and not strictly for binding affinity or stability. These results suggest a mechanism for formation of the complex where the unfolded ACTR domain interacts with the partly folded CBP domain in a rapid and specific manner to form the final stable complex.

Many proteins are capable of populating partially folded states known as molten globule states. Alpha-lactalbumin forms a molten globule under a range of conditions including low pH (the A-state) and at neutral pH in the absence of Ca(2+) with modest amounts of denaturant. The A-state is the most thoroughly characterized and thought to mimic a kinetic intermediate populated during refolding at neutral pH. We demonstrate that the properties and interactions that stabilize the A-state and the pH 7 molten globule of human alpha-lactalbumin differ. The unfolding of the wild-type protein is compared to the unfolding of a variant that lacks the 6 - 120 disulfide bond and to an autonomously folded peptide construct that we have previously shown represents the minimum core structure of the A-state of human alpha-lactalbumin. Studies conducted at pH 2 and 7 show that the disulfide makes little contribution to the stability of the molten globule at pH 7 but is important at pH 2. In contrast, the beta-subdomain of the protein is less important at pH 2 than at pH 7. The role of helix propensity in stabilizing the different forms of the molten globule state is examined and it is shown that it cannot account for the differences. The strikingly different behavior observed at pH 2 and 7 indicates that the A-state may not be a rigorous mimic of the folding intermediate populated at pH 7., (Copyright 2003 Wiley-Liss, Inc.)

Nuclear hormone receptors are ligand-activated transcription factors that regulate the expression of genes that are essential for development, reproduction and homeostasis. The hormone response is mediated through recruitment of p160 receptor coactivators and the general transcriptional coactivator CBP/p300, which function synergistically to activate transcription. These coactivators exhibit intrinsic histone acetyltransferase activity, function in the remodelling of chromatin, and facilitate the recruitment of RNA polymerase II and the basal transcription machinery. The activities of the p160 coactivators are dependent on CBP. Both coactivators are essential for proper cell-cycle control, differentiation and apoptosis, and are implicated in cancer and other diseases. To elucidate the molecular basis of assembling the multiprotein activation complex, we undertook a structural and thermodynamic analysis of the interaction domains of CBP and the activator for thyroid hormone and retinoid receptors. Here we show that although the isolated domains are intrinsically disordered, they combine with high affinity to form a cooperatively folded helical heterodimer. Our study uncovers a unique mechanism, called 'synergistic folding', through which p160 coactivators recruit CBP/p300 to allow transmission of the hormonal signal to the transcriptional machinery.

alpha-Lactalbumin (alpha LA) forms a well-populated equilibrium molten globule state, while the homologous protein hen lysozyme does not. alpha LA is a two-domain protein and the alpha-domain is more structured in the molten globule state than is the beta-domain. Peptide models derived from the alpha-subdomain that contain the A, B, D, and 3(10) helices of alpha LA are capable of forming a molten globule state in the absence of the remainder of the protein. Here we report comparative studies of a peptide model derived from the same region of hen lysozyme and a set of chimeric alpha-lactalbumin--lysozyme constructs. Circular dichroism, dynamic light scattering, sedimentation equilibrium, and fluorescence experiments indicate that the lysozyme construct does not fold. Chimeric constructs were prepared to probe the origins of the difference in the ability of the two isolated subdomains to fold. The first consists of the A and B helices of alpha LA cross-linked to the D and C-terminal 3(10) helices of lysozyme. This construct is highly helical, while a second construct that contains the A and B helices of lysozyme cross-linked to the D and 3(10) helices of alpha LA does not fold. Furthermore, the disulfide cross-linked homodimer of the alpha LA AB peptide is helical, while the homodimer of the lysozyme AB peptide is unstructured. Thus, the AB helix region of alpha LA appears to have an intrinsic ability to form structure as long as some relatively nonspecific interactions can be made with other regions of the protein. Our studies show that the A and B helices plays a key role in the ability of the respective alpha-subdomains to fold.

The molten globule state of alpha-lactalbumin (alpha LA) has served as a paradigm for understanding the role of these partially folded states in protein folding. We previously showed that a peptide construct consisting of the A and B helices (residues 1-38) cross-linked to the D- and C-terminal 3(10) helices (residues 101-120) of alpha LA is capable of folding to a stable molten globule-like state. Here, we report the study of three peptide constructs that are designed to investigate the contribution two short hydrophobic sequences located near the C-terminus of alpha LA make to the structure and stability of the alpha LA molten globule state. These regions of the protein have been shown to form stable non-native structures in isolation. The three peptide constructs contain residues 1-38 cross-linked to three separate C-terminal peptides via the native 28-111 disulfide bond. The C-terminal peptides consist of residues 101-114, 106-120, and 106-114. The results of CD, fluorescence, ANS binding, and urea denaturation experiments indicate that constructs that lack either of the hydrophobic sequences (residues 101-105 and 115-120) are significantly less structured. These results highlight the importance of long-range, mutually stabilizing interactions within the molten globule state of the protein. Proteins 2001;42:237-242., (Copyright 2000 Wiley-Liss, Inc.)

Elucidating the properties of the denatured state of proteins under conditions relevant for their folding is a key factor in understanding the folding process. We show that a peptide corresponding to residues 111-120 of human alpha-lactalbumin has a pronounced propensity to adopt nonnative structure in aqueous solution. Two-dimensional NMR provides evidence for a structured, nonnative conformation in fast exchange with a random coil ensemble. A total of 78 Rotating Frame Overhauser Effects (ROEs) were used to calculate the conformation of the structured population. A nonnative cluster of hydrophobic residues involving the side chains of K114, W118, Ll119, and A120 is observed, which helps to stabilize a turn-like conformation in the vicinity of residues 115-118. The structure in 30% (vol/vol) TFE was also calculated. Interestingly, the addition of TFE did not simply amplify the population of the structured conformer observed in H2O, but instead induced a new conformation. The implications for the folding of the intact protein are discussed. We also discuss the implications of this study for the relevance of the use of mixed TFE/H2O solvent systems to study isolated peptides.

Molten globule states are partially folded states of proteins which are compact and contain a high degree of secondary structure but which lack many of the fixed tertiary interactions associated with the native state. A set of peptides has been prepared in order to probe the role of local interactions in the vicinity of the Cys(6)-Cys(120) disulfide bond in stabilizing the molten globule state of human alpha-lactalbumin. Peptides derived from the N-terminal and C-terminal regions of human alpha-lactalbumin have been analyzed using nuclear magnetic resonance, circular dichroism, fluorescence spectroscopy and sedimentation equilibrium experiments. A peptide corresponding to the first helical region in the native protein, residues 1-13, is only slightly helical in isolation. Extending the peptide to include residues 14-18 results in a modest increase in helicity. A peptide derived from the C-terminal 12 residues, residues 112-123, is predominantly unstructured. Crosslinking the N- and C-terminal peptides by the native disulfide bond results in almost no increase in structure and there is no evidence for any significant cooperative structure formation over the range of pH 2.2-11.7. These results demonstrate that there is very little enhancement of local structure due to the formation of the Cys(6)-Cys(120) disulfide bond. This is in striking contrast to peptides derived from the region of the Cys(28)-Cys(111) disulfide.

Molten globules are partially folded states of proteins which are generally believed to mimic structures formed during the folding process. In order to determine the minimal requirements for the formation of a molten globule state, we have prepared a set of peptide models of the molten globule state of human alpha-lactalbumin (alphaLA). A peptide consisting of residues 1-38 crosslinked, via the native 28-111 disulfide bond, to a peptide corresponding to residues 95-120 forms a partially folded state at pH 2.8 which has all of the characteristics of the molten globule state of alphaLA as judged by near and far UV CD, fluorescence, ANS binding and urea denaturation experiments. The structure of the peptide construct is the same at pH 7.0. Deletion of residues 95-100 from the construct has little effect. Thus, less than half the sequence is required to form a molten globule. Further truncation corresponding to the selective deletion of the A (residues 1-19) or D (residues 101-110) helices or the C-terminal 310 helix (residues 112-120) leads to a significant loss of structure. The loss of structure which results from the deletion of any of these three regions is much greater than that which would be expected based upon the non-cooperative loss of local helical structure. Deletion of residues corresponding to the region of the D helix or C-terminal 310 helix region results in a peptide construct which is largely unfolded and contains no more helical structure than is expected from the sum of the helicity of the two reduced peptides. These experiments have defined the minimum core structure of the alphaLA molten globule state., (Copyright 1999 Academic Press.)

There are a small number of peptides derived from proteins that have a propensity to adopt structure in aqueous solution which is similar to the structure they possess in the parent protein. There are far fewer examples of protein fragments which adopt stable nonnative structures in isolation. Understanding how nonnative interactions are involved in protein folding is crucial to our understanding of the topic. Here we show that a small, 11 amino acid peptide corresponding to residues 101-111 of the protein alpha-lactalbumin is remarkably structured in isolation in aqueous solution. The peptide has been characterized by 1H NMR, and 170 ROE-derived constraints were used to calculate a structure. The calculations yielded a single, high-resolution structure for residues 101-107 that is nonnative in both the backbone and side-chain conformations. In the pH 6.5 crystal structure, residues 101-105 are in an irregular turn-like conformation and residues 106-111 form an alpha-helix. In the pH 4.2 crystal structure, residues 101-105 form an alpha-helix, and residues 106-111 form a loopike structure. Both of these structures are significantly different from the conformation adopted by our peptide. The structure in the peptide model is primarily the result of local side-chain interactions that force the backbone to adopt a nonnative 310/turn-like structure in residues 103-106. The structure in aqueous solution was compared to the structure in 30% trifluoroethanol (TFE), and clear differences were observed. In particular, one of the side-chain interactions, a hydrophobic cluster involving residues 101-105, is different in the two solvents and residues 107-111 are considerably more ordered in 30% TFE. The implications of the nonnative structure for the folding of alpha-lactalbumin is discussed.

alpha-Lactalbumin, a small calcium-binding protein, forms an equilibrium molten globule state under a variety of conditions. A set of four peptides designed to probe the role of local interactions and the role of potential long-range interactions in stabilizing the molten globule of alpha-lactalbumin has been prepared. The first peptide consists of residues 20 through 36 of human alpha-lactalbumin and includes the entire B-helix. This peptide is unstructured in solution as judged by CD. The second peptide is derived from residues 101 through 120 and contains both the D and 310 helices. When this peptide is crosslinked via the native 28 to 111 disulfide to the B-helix peptide, a dramatic increase in helicity is observed. The crosslinked peptide is monomeric, as judged by analytical ultracentrifugation. The peptide binds 1-anilinonaphthalene-8-sulphonate (ANS) and the fluorescence emission maximum of the construct is consistent with partial solvent exposure of the tryptophan residues. The peptide corresponding to residues 101 to 120 adopts significant non-random structure in aqueous solution at low pH. Two hydrophobic clusters, one involving residues 101 through 104 and the other residues 115 through 119 have been identified and characterized by NMR. The hydrophobic cluster formed by residues 101 through 104 is still present in a smaller peptide containing only residues 101 to 111 of alpha-lactalbumin. The cluster also persists in 6 M urea. A non-native, pH-dependent interaction between the Y103 and H107 side-chains that was previously identified in the acid-denatured molten globule state was examined. This interaction was found to be more prevalent at low pH and may therefore be an example of a local interaction that stabilizes preferentially the acid-induced molten globule state., (Copyright 1998 Academic Press.)