Search

BackgroundNon-sputum-based triage tests for tuberculosis are a priority for ending tuberculosis. We aimed to evaluate the diagnostic accuracy of the late-prototype Xpert MTB Host Response (Xpert HR) blood-based assay.MethodsWe conducted a prospective diagnostic accuracy study among outpatients with presumed tuberculosis in outpatient clinics in Viet Nam, India, the Philippines, Uganda, and South Africa. Eligible participants were aged 18 years or older and reported cough lasting at least 2 weeks. We excluded those receiving tuberculosis treatment in the preceding 12 months and those who were unwilling to consent. Xpert HR was performed on capillary or venous blood. Reference standard testing included sputum Xpert MTB/RIF Ultra and mycobacterial culture. We performed receiver operating characteristic (ROC) analysis to identify the optimal cutoff value for the Xpert HR to achieve the target sensitivity of 90% or more while maximising specificity, then calculated diagnostic accuracy using this cutoff value. This study was prospectively registered with ClinicalTrials.gov, NCT04923958.FindingsBetween July 13, 2021, and Aug 15, 2022, 2046 adults with at least 2 weeks of cough were identified, of whom 1499 adults (686 [45·8%] females and 813 [54·2%] males) had valid Xpert HR and reference standard results. 329 (21·9%) had microbiologically confirmed tuberculosis. Xpert HR had an area under the ROC curve of 0·89 (95% CI 0·86-0·91). The optimal cutoff value was less than or equal to -1·25, giving a sensitivity of 90·3% (95% CI 86·5-93·3; 297 of 329) and a specificity of 62·6% (95% CI 59·7-65·3; 732 of 1170). Sensitivity was similar across countries, by sex, and by subgroups, although specificity was lower in people living with HIV (45·1%, 95% CI 37·8-52·6) than in those not living with HIV (65·9%, 62·8-68·8; difference of 20·8%, 95% CI 13·0-28·6; p

The COVID-19 pandemic brought diagnostics into the spotlight in an unprecedented way not only for case management but also for population health, surveillance, and monitoring. The industry saw notable levels of investment and accelerated research which sparked a wave of innovation. Simple non-invasive sampling methods such as nasal swabs have become widely used in settings ranging from tertiary hospitals to the community. Self-testing has also been adopted as standard practice using not only conventional lateral flow tests but novel and affordable point-of-care molecular diagnostics. The use of new technologies, including artificial intelligence-based diagnostics, have rapidly expanded in the clinical setting. The capacity for next-generation sequencing and acceptance of digital health has significantly increased. However, 4 years after the pandemic started, the market for SARS-CoV-2 tests is saturated, and developers may benefit from leveraging their innovations for other diseases; tuberculosis (TB) is a worthwhile portfolio expansion for diagnostics developers given the extremely high disease burden, supportive environment from not-for-profit initiatives and governments, and the urgent need to overcome the long-standing dearth of innovation in the TB diagnostics field. In exchange, the current challenges in TB detection may be resolved by adopting enhanced swab-based molecular methods, instrument-based, higher sensitivity antigen detection technologies, and/or artificial intelligence-based digital health technologies developed for COVID-19. The aim of this article is to review how such innovative approaches for COVID-19 diagnosis can be applied to TB to have a comparable impact.

IntroductionIn high-burden settings, low-complexity screening tests for tuberculosis (TB) could expand the reach of community-based case-finding efforts. The potential costs and cost-effectiveness of approaches incorporating these tests are poorly understood.MethodsWe developed a microsimulation model assessing 3 approaches to community-based case-finding in hypothetical populations (India-, South Africa-, The Philippines-, Uganda-, and Vietnam-like settings) with TB prevalence 4 times that of national estimates: (1) screening with a point-of-care C-reactive protein (CRP) test, (2) screening with a more sensitive "Hypothetical Screening test" (95% sensitive for Xpert Ultra-positive TB, 70% specificity; equipment/labor costs similar to Xpert Ultra, but using a $2 cartridge) followed by sputum Xpert Ultra if positive, or (3) testing all individuals with sputum Xpert Ultra. Costs are expressed in 2023 US dollars and include treatment costs.ResultsUniversal Xpert Ultra was estimated to cost a mean $4.0 million (95% uncertainty range: $3.5 to $4.6 million) and avert 3200 (2600 to 3900) TB-related disability-adjusted life years (DALYs) per 100 000 people screened ($670 [The Philippines] to $2000 [Vietnam] per DALY averted). CRP was projected to cost $550 (The Philippines) to $1500 (Vietnam) per DALY averted but with 44% fewer DALYs averted. The Hypothetical Screening test showed minimal benefit compared to universal Xpert Ultra, but if specificity were improved to 95% and per-test cost to $4.5 (all-inclusive), this strategy could cost $390 (The Philippines) to $940 (Vietnam) per DALY averted.ConclusionsScreening tests can meaningfully improve the cost-effectiveness of community-based case-finding for TB but only if they are sensitive, specific, and inexpensive.

IntroductionIn 2014, the WHO published high-priority target product profiles (TPPs) for new tuberculosis (TB) diagnostics to align end-user needs with test targets and specifications; nevertheless, no TB test meets these targets to date. The COVID-19-driven momentum in the diagnostics world offers an opportunity to address the long-standing lack of innovation in the field of TB diagnostics. This scoping review aims to summarise point-of-care (POC) molecular and antigen tests for COVID-19 diagnosis that, when applied to TB, potentially meet WHO TPPs. This summary of currently available innovative diagnostic tools will guide the development of novel TB diagnostics toward the WHO-set targets.Methods and analysisWe will follow the Preferred Reporting Items for Systematic Reviews and Meta-Analyses extension Scoping Reviews recommendations. MEDLINE (via PubMed), bioRxiv, MedRxiv and other publicly available in vitro diagnostic test databases were searched on 23 November 2022. POC antigen or molecular tests developed for SARS-CoV-2 detection that meet the eligibility criteria will be included in the review. Developer description, test description, operation characteristics, pricing information, performance and commercialisation status of diagnostic tests identified will be extracted using a predefined standardised data extraction form. Two reviewers will independently perform the screening and data extraction. A narrative synthesis of the final data will be provided.Ethics and disseminationNo ethical approval is required because individual patient data will not be included. The findings will be published in open-access scientific journals.

The World Health Organization has developed target product profiles containing minimum and optimum targets for key characteristics for tests for tuberculosis treatment monitoring and optimization. Tuberculosis treatment optimization refers to initiating or switching to an effective tuberculosis treatment regimen that results in a high likelihood of a good treatment outcome. The target product profiles also cover tests of cure conducted at the end of treatment. The development of the target product profiles was informed by a stakeholder survey, a cost-effectiveness analysis and a patient-care pathway analysis. Additional feedback from stakeholders was obtained by means of a Delphi-like process, a technical consultation and a call for public comment on a draft document. A scientific development group agreed on the final targets in a consensus meeting. For characteristics rated of highest importance, the document lists: (i) high diagnostic accuracy (sensitivity and specificity); (ii) time to result of optimally [less than or equal to] 2 hours and no more than 1 day; (iii) required sample type to be minimally invasive, easily obtainable, such as urine, breath, or capillary blood, or a respiratory sample that goes beyond sputum; (iv) ideally the test could be placed at a peripheral-level health facility without a laboratory; and (v) the test should be affordable to low- and middle-income countries, and allow wide and equitable access and scale-up. Use of these target product profiles should facilitate the development of new tuberculosis treatment monitoring and optimization tests that are accurate and accessible for all people being treated for tuberculosis. L'Organisation mondiale de la sante a elabore des profils de produits cibles contenant des cibles minimales et optimales pour les caracteristiques principales des essais destines au suivi et a l'optimisation du traitement de la tuberculose. L'optimisation du traitement de la tuberculose fait reference a l'instauration d'un regime de traitement efficace de la tuberculose ou a l'adoption d'un tel regime, avec une probabilite elevee d'obtenir de bons resultats therapeutiques. Les profils de produits cibles couvrent egalement les essais de guerison effectues a l'issue du traitement. Les profils de produits cibles ont ete elabores sur la base d'un sondage aupres des parties prenantes, d'une analyse cout-efficacite et d'une analyse du parcours de soins du patient. Des retours supplementaires des parties prenantes ont ete obtenus au moyen d'un processus cree selon la methode Delphi, d'une consultation technique et d'un appel a commentaires publics sur un projet de document. Un groupe d'elaboration scientifique s'est mis d'accord sur les objectifs finaux lors d'une reunion de concertation. En ce qui concerne les caracteristiques jugees les plus importantes, le document enumere ce qui suit: (i) une grande precision diagnostique (sensibilite et specificite); (ii) un delai ideal d'obtention des resultats [less than or equal to] 2 heures et au maximum de 1 jour; (iii) le type d'echantillon requis doit etre peu invasif et facile a obtenir, comme l'urine, l'haleine ou le sang capillaire, ou bien un echantillon respiratoire au-dela des expectorations; (iv) idealement, l'essai pourrait avoir lieu dans un etablissement de sante peripherique sans laboratoire ; et (v) l'essai devrait etre abordable pour les pays a revenu faible et intermediaire et permettre un acces large et equitable ainsi qu'une mise a l'echelle. L'utilisation de ces profils de produits cibles devrait faciliter la mise au point de nouveaux essais de surveillance et d'optimisation du traitement de la tuberculose qui soient precis et accessibles a toutes les personnes suivant un traitement pour la tuberculose. La Organizacion Mundial de la Salud ha elaborado perfiles de productos objetivo que contienen objetivos minimos y optimos para las caracteristicas principales de las pruebas de seguimiento y optimizacion del tratamiento de la tuberculosis. La optimizacion del tratamiento de la tuberculosis consiste en iniciar o cambiar a un regimen eficaz de tratamiento de la tuberculosis que ofrezca una alta probabilidad de un buen resultado terapeutico. Los perfiles de productos objetivo tambien abarcan las pruebas de curacion realizadas al final del tratamiento. La elaboracion de los perfiles de los productos objetivo se baso en una encuesta a las partes interesadas, un analisis de rentabilidad y un analisis de la via de atencion al paciente. Se obtuvo informacion adicional de las partes interesadas mediante un proceso tipo Delphi, una consulta tecnica y una convocatoria de comentarios publicos sobre un borrador del documento. Un grupo de desarrollo cientifico acordo los objetivos finales en una reunion de consenso. Para las caracteristicas clasificadas de mayor importancia, el documento enumera: (i) alta precision diagnostica (sensibilidad y especificidad); (ii) tiempo hasta el resultado de optimamente [less than or equal to] 2 horas y no mas de 1 dia; (iii) el tipo de muestra requerida debe ser minimamente invasiva, facil de obtener, como orina, aliento o sangre capilar, o una muestra respiratoria que vaya mas alla del esputo; (iv) idealmente la prueba podria realizarse en un centro sanitario periferico sin laboratorio; y (v) la prueba debe ser asequible para los paises de ingresos bajos y medios y permitir un acceso amplio y equitativo y su expansion. El uso de estos perfiles de producto objetivo deberia facilitar el desarrollo de pruebas nuevas de seguimiento y optimizacion del tratamiento de la tuberculosis que sean precisas y accesibles para todas las personas que reciben tratamiento antituberculoso. [phrase omitted], Introduction Tuberculosis continues to be a major cause of morbidity and mortality globally, despite being curable and preventable. In 2021, an estimated 10.6 million people had tuberculosis disease and 1.6 [...]

Inappropriately high breakpoints have resulted in systematic false-susceptible AST results to anti-TB drugs. MIC, PK/PD and clinical outcome data should be combined when setting breakpoints to minimise the emergence and spread of antimicrobial resistance. https://bit.ly/3i43wb6

ObjectiveThe effectiveness of household contact investigations is limited by low referral uptake for clinic-based TB testing by symptomatic household contacts. We qualitatively investigated the acceptability and perceived benefits of home-based TB testing using a portable GeneXpert-I instrument (GX-I) in an urban South African township.MethodsIn-depth interviews were conducted with household contacts tested and those that observed testing. Semi-structured interviews explored household contact's understanding of TB, perceptions of the GX-I device and testing procedures, confidentiality, willingness to refer others, and views on home- vs. clinic-based testing. Focus group discussions with home-based TB testing implementing staff assessed operational considerations for scale-up. Data were analysed using a constant comparison approach to qualitatively evaluate the acceptability and feasibility of home-based TB testing.ResultsThirty in-depth interviews and two focus group discussions were conducted. Observing one's own sputum being tested resulted in an emergent trust in home-based TB testing, the GX-I device and one's test results. Home-based TB testing was considered convenient, helped to overcome apathy towards testing and mitigated barriers to clinic-based testing. Perceptions that home-based TB testing contributes to improved household and community health resulted in an emergent theme of alleviation of health insecurities. Operational concerns regarding inadvertent disclosure of one's diagnosis to household members and time spent in people's homes were identified.ConclusionsHome-based TB testing was acceptable and feasible. Individuals expressed belief in the machine by being able to witness the testing process. Though most themes mirrored qualitative studies of home-based HIV testing, the alleviation of health insecurities theme is unique to home-based TB testing. Future research must evaluate the impact of home-based TB testing on case finding yield, time-to-treatment initiation and household outcomes.

FujiLAM point-of-care rapid urine test for TB detects a large proportion of pulmonary and traditionally difficult-to-diagnose extra-pulmonary forms of TB in hospitalised patients with advanced HIV http://bit.ly/36Dl0Eo

Approximately 3.6 million cases of active tuberculosis (TB) go potentially undiagnosed annually, partly due to limited access to confirmatory diagnostic tests, such as molecular assays or mycobacterial culture, in community and primary healthcare settings. This article provides guidance for TB triage test evaluations. A TB triage test is designed for use in people with TB symptoms and/or significant risk factors for TB. Triage tests are simple and low-cost tests aiming to improve ease of access and implementation (compared with confirmatory tests) and decrease the proportion of patients requiring more expensive confirmatory testing. Evaluation of triage tests should occur in settings of intended use, such as community and primary healthcare centers. Important considerations for triage test evaluation include study design, population, sample type, test throughput, use of thresholds, reference standard (ideally culture), and specimen flow. The impact of a triage test will depend heavily on issues beyond accuracy, primarily centered on implementation.

BackgroundAccurate, comprehensive, and timely detection of drug-resistant tuberculosis (TB) is essential to inform patient treatment and enable public health surveillance. This is crucial for effective control of TB globally. Whole-genome sequencing (WGS) and targeted next-generation sequencing (NGS) approaches have potential as rapid in vitro diagnostics (IVDs), but the complexity of workflows, interpretation of results, high costs, and vulnerability of instrumentation have been barriers to broad uptake outside of reference laboratories, especially in low- and middle-income countries. A new, solid-state, tabletop sequencing instrument, Illumina iSeq100, has the potential to decentralize NGS for individual patient care.Methods and findingsIn this study, we evaluated WGS and targeted NGS for TB on both the new iSeq100 and the widely used MiSeq (both manufactured by Illumina) and compared sequencing performance, costs, and usability. We utilized DNA libraries produced from Mycobacterium tuberculosis clinical isolates for the evaluation. We conducted WGS on three strains and observed equivalent uniform genome coverage with both platforms and found the depth of coverage obtained was consistent with the expected data output. Utilizing the standardized, cloud-based ReSeqTB bioinformatics pipeline for variant analysis, we found the two platforms to have 94.0% (CI 93.1%-94.8%) agreement, in comparison to 97.6% (CI 97%-98.1%) agreement for the same libraries on two MiSeq instruments. For the targeted NGS approach, 46 M. tuberculosis-specific amplicon libraries had 99.6% (CI 98.0%-99.9%) agreement between the iSeq100 and MiSeq data sets in drug resistance-associated SNPs. The upfront capital costs are almost 5-fold lower for the iSeq100 ($19,900 USD) platform in comparison to the MiSeq ($99,000 USD); however, because of difference in the batching capabilities, the price per sample for WGS was higher on the iSeq100. For WGS of M. tuberculosis at the minimum depth of coverage of 30x, the cost per sample on the iSeq100 was $69.44 USD versus $28.21 USD on the MiSeq, assuming a 2 × 150 bp run on a v3 kit. In terms of ease of use, the sequencing workflow of iSeq100 has been optimized to only require 27 minutes total of hands-on time pre- and post-run, and the maintenance is simplified by a single-use cartridge-based fluidic system. As these are the first sequencing attempts on the iSeq100 for M. tuberculosis, the sequencing pool loading concentration still needs optimization, which will affect sequencing error and depth of coverage. Additionally, the costs are based on current equipment and reagent costs, which are subject to change.ConclusionsThe iSeq100 instrument is capable of running existing TB WGS and targeted NGS library preparations with comparable accuracy to the MiSeq. The iSeq100 has reduced sequencing workflow hands-on time and is able to deliver sequencing results in

BackgroundTuberculosis (TB) infection was responsible for an estimated 1.3 million deaths in 2017. Better diagnostic tools are urgently needed. We sought to determine whether accurate TB antigen detection in blood or urine has the potential to meet the WHO target product profiles for detection of active TB.Materials and methodsWe developed Electrochemiluminescence (ECL) immunoassays for Lipoarabinomannan (LAM) and ESAT-6 detection with detection limits in the pg/ml range and used them to compare the concentrations of the two antigens in the urine and serum of 81 HIV-negative and -positive individuals with presumptive TB enrolled across diverse geographic sites.ResultsLAM and ESAT-6 overall sensitivities in urine were 93% and 65% respectively. LAM and ESAT-6 overall sensitivities in serum were 55% and 46% respectively. Overall specificity was ≥97% in all assays. Sensitivities were higher in HIV-positive compared to HIV-negative patients for both antigens and both sample types, with signals roughly 10-fold higher on average in urine than in serum. The two antigens showed similar concentration ranges within the same sample type and correlated.ConclusionsLAM and ESAT-6 can be detected in the urine and serum of TB patients, regardless of the HIV status and further gains in clinical sensitivity may be achievable through assay and reagent optimization. Accuracy in urine was higher with current methods and has the potential to meet the WHO accuracy target if the findings can be transferred to a point-of-care TB test.

The only currently commercialized point-of-care assay for tuberculosis (TB) that measures lipoarabinomannan (LAM) in urine (Alere LF-LAM) has insufficient sensitivity. We evaluated the potential of 100 novel monoclonal antibody pairs targeting a variety of LAM epitopes on a sensitive electrochemiluminescence platform to improve the diagnostic accuracy. In the screening, many antibody pairs showed high reactivity to purified LAM but performed poorly at detecting urinary LAM in clinical samples, suggesting differences in antigen structure and immunoreactivity of the different LAM sources. The 12 best antibody pairs from the screening were tested in a retrospective case-control study with urine samples from 75 adults with presumptive TB. The best antibody pair reached femtomolar analytical sensitivity for LAM detection and an overall clinical sensitivity of 93% (confidence interval [CI], 80% to 97%) and specificity of 97% (CI, 85% to 100%). Importantly, in HIV-negative subjects positive for TB by sputum smear microscopy, the test achieved a sensitivity of 80% (CI, 55% to 93%). This compares to an overall sensitivity of 33% (CI, 20% to 48%) of the Alere LF-LAM and a sensitivity of 13% (CI, 4% to 38%) in HIV-negative subjects in the same sample set. The capture antibody targets a unique 5-methylthio-d-xylofuranose (MTX)-dependent epitope in LAM that is specific to the Mycobacterium tuberculosis complex and shows no cross-reactivity with fast-growing mycobacteria or other bacteria. The present study provides evidence that improved assay methods and reagents lead to increased diagnostic accuracy. The results of this work have informed the development of a sensitive and specific novel LAM point-of-care assay with the aim to meet the WHO's performance target for TB diagnosis.

The only currently commercialized point-of-care assay for tuberculosis (TB) that measures lipoarabinomannan (LAM) in urine (Alere LF-LAM) has insufficient sensitivity. We evaluated the potential of 100 novel monoclonal antibody pairs targeting a variety of LAM epitopes on a sensitive electrochemiluminescence platform to improve the diagnostic accuracy. In the screening, many antibody pairs showed high reactivity to purified LAM but performed poorly at detecting urinary LAM in clinical samples, suggesting differences in antigen structure and immunoreactivity of the different LAM sources. The 12 best antibody pairs from the screening were tested in a retrospective case-control study with urine samples from 75 adults with presumptive TB. The best antibody pair reached femtomolar analytical sensitivity for LAM detection and an overall clinical sensitivity of 93% (confidence interval [CI], 80% to 97%) and specificity of 97% (CI, 85% to 100%). Importantly, in HIV-negative subjects positive for TB by sputum smear microscopy, the test achieved a sensitivity of 80% (CI, 55% to 93%). This compares to an overall sensitivity of 33% (CI, 20% to 48%) of the Alere LF-LAM and a sensitivity of 13% (CI, 4% to 38%) in HIV-negative subjects in the same sample set. The capture antibody targets a unique 5-methylthio-d-xylofuranose (MTX)-dependent epitope in LAM that is specific to the Mycobacterium tuberculosis complex and shows no cross-reactivity with fast-growing mycobacteria or other bacteria. The present study provides evidence that improved assay methods and reagents lead to increased diagnostic accuracy. The results of this work have informed the development of a sensitive and specific novel LAM point-of-care assay with the aim to meet the WHO's performance target for TB diagnosis.

A clear understanding of the genetic basis of antibiotic resistance in Mycobacterium tuberculosis is required to accelerate the development of rapid drug susceptibility testing methods based on genetic sequence.Raw genotype-phenotype correlation data were extracted as part of a comprehensive systematic review to develop a standardised analytical approach for interpreting resistance associated mutations for rifampicin, isoniazid, ofloxacin/levofloxacin, moxifloxacin, amikacin, kanamycin, capreomycin, streptomycin, ethionamide/prothionamide and pyrazinamide. Mutation frequencies in resistant and susceptible isolates were calculated, together with novel statistical measures to classify mutations as high, moderate, minimal or indeterminate confidence for predicting resistance.We identified 286 confidence-graded mutations associated with resistance. Compared to phenotypic methods, sensitivity (95% CI) for rifampicin was 90.3% (89.6-90.9%), while for isoniazid it was 78.2% (77.4-79.0%) and their specificities were 96.3% (95.7-96.8%) and 94.4% (93.1-95.5%), respectively. For second-line drugs, sensitivity varied from 67.4% (64.1-70.6%) for capreomycin to 88.2% (85.1-90.9%) for moxifloxacin, with specificity ranging from 90.0% (87.1-92.5%) for moxifloxacin to 99.5% (99.0-99.8%) for amikacin.This study provides a standardised and comprehensive approach for the interpretation of mutations as predictors of M. tuberculosis drug-resistant phenotypes. These data have implications for the clinical interpretation of molecular diagnostics and next-generation sequencing as well as efficient individualised therapy for patients with drug-resistant tuberculosis.