Search

The accumulation of gases into our atmosphere is a growing global concern that requires considerable quantification of the emission rates and mitigate the accumulation of gases in the atmosphere, especially the greenhouse gases (GHG). In agriculture there are many sources of GHG that require attention in order to develop practical mitigation strategies. Measuring these GHG sources often rely on highly technical instrumentation originally designed for applications outside of the emissions research in agriculture. Although the open-path laser (OPL) and open-path Fourier transform infrared (OP-FTIR) spectroscopic techniques are used in agricultural research currently, insight into their contributing error to emissions research has not been the focus of these studies. The objective of this study was to assess the applicability and performance (accuracy and precision) of OPL and OP-FTIR spectroscopic techniques for measuring gas concentration from agricultural sources. We measured the mixing ratios of trace gases methane (CH4), nitrous oxide (N2O), and ammonia (NH3), downwind of point and area sources with known release rates. The OP-FTIR provided the best performance regarding stability of drift in stable conditions. The CH4 OPL accurately detected the low background (free-air) level of CH4; however, the NH3 OPL was unable to detect the background values < 10 ppbv. [ABSTRACT FROM AUTHOR]

A technique combining open-path Fourier transform infrared spectroscopy with an inverse-dispersion model was used to quantify methane (CH4), nitrous oxide (N2O) and ammonia (NH3) emissions from an isolated cattle pen in south-eastern Australia. Twenty-eight Angus steers (1-year old, initial average liveweight 404 kg) were fed a 60% grain diet and kept in a pen (20 × 20 m) for 41 days. Gas concentrations were measured downwind of the pen using an open-path Fourier transform infrared spectroscopy with a path length of 100 m, having a detection sensitivity of 2, 0.3 and 0.4 ppb for CH4, N2O and NH3, respectively. Daily emission rates were 232, 14 and 192 g/cattle.day for CH4, N2O and NH3, respectively. The measured CH4 emissions were in agreement with predictions based on Australian National Inventory recommendations, however, measured N2O and NH3 emissions were much higher than the predicted values. Extrapolation of our measurements would mean that CH4 and N2O emissions from beef feedlot cattle contribute 3.1% and 5.9% of the Australian agricultural CH4 and N2O emissions, respectively. [ABSTRACT FROM AUTHOR]

In open beef feedlot systems, more than 50% of dietary nitrogen (N) is lost as ammonia (NH3). Here we report an effective and economically-viable method to mitigate NH3 emissions by the application of lignite. We constructed two cattle pens (20 × 20 m) to determine the effectiveness of lignite in reducing NH3 emissions. Twenty-four steers were fed identical commercial rations in each pen. The treatment pen surface was dressed with 4.5 kg m−2 lignite dry mass while no lignite was applied in the control pen. We measured volatilised NH3 concentrations using Ecotech EC9842 NH3 analysers in conjunction with a mass balance method to calculate NH3 fluxes. Application of lignite decreased NH3 loss from the pen by approximately 66%. The cumulative NH3 losses were 6.26 and 2.13 kg N head−1 in the control and lignite treatment, respectively. In addition to the environmental benefits of reduced NH3 losses, the value of retained N nutrient in the lignite treated manure is more than $37 AUD head−1 yr−1, based on the current fertiliser cost and estimated cost of lignite application. We show that lignite application is a cost-effective method to reduce NH3 loss from cattle feedlots. [ABSTRACT FROM AUTHOR]