Search

An epidemiological study was conducted in North-East India (part of Indo-Burma biodiversity hotspot) to better understand the distribution, diversity, and transmission of Clostridium perfringens among livestock, pets, wild animals (captive), and humans. A total of 160 C. perfringens isolates were recovered from 642 diarrhoeic faecal samples with an isolation rate of 24.92%. Isolation rate was the highest among captive wild animals (37.5%) followed by dog (34.6%), human (33.8%), pig (32.7%), cattle (20.8%), goat (18.3%) and poultry (9.3%). Isolates were toxin typed using a seven gene multiplex PCR designed for simultaneous detection of cpa, cpb, cpb2, etx, iap, cpe and netB. The majority of isolates, 128 (80%) were of type A, followed by 17 (10.62%), 5 (3.12%), 4 (2.5%), 3 (1.87%), 2 (1.25%) and 1 (0.63%) isolates of type C, D, E, G, F and B, respectively. Beta 2 toxin gene was present in 65 (50%) of type A isolates, followed by 7 (41.2%), 4 (80%), 1(25%), and 1 (100%) of type C, D, G and B isolates, respectively. Beta 2 toxin has a high prevalence among dogs (28.6%), cattle (27.3%), and pig (20.8%) compared to humans, goat, wild animals, and poultry (1.2-14.3%). The prevalence of CPE and NetB toxin-positive strains was low, with only 3 (1.8%) and 5 (3.1%) isolates, respectively. Association of C. perfringens with diarrhoea in Civet Cat, Golden Langur, and Gray Langur has been reported for the first time. The genetic diversity and transmission of isolates were investigated using automated rep-PCR (Diversilab®, bioMérieux) using two densitometry-based matrices: modified Kullback-Leibler (KL) and Pearson's correlation (PC). The PC and modified KL matrices formed three distinct clusters with 59% and 27.2% similarity, respectively. C. perfringens diversity and transmission were best studied using modified KL matrix that placed more emphasis on the presence of bands rather than intensity. However, the PC method was found to be more suitable for differentiating strains within a toxin type, with slightly higher D-values., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

In forensic anthropology, age estimation is a major element in the determination of a biological profile and the identification of individuals. Thus, many anatomical structures have been studied, such as the pubic symphysis, which is a source of major interest due to its late maturation. One of the most well-known methods of assessment is the Suchey-Brooks (SB) system based on the morphological characteristics of the pubic symphysis. The aim of this study was to propose linear regression formulae in order to deduce chronological age from bone density, using both Hounsfield unit (HU), and mean bone density (mBD) values of the pubic symphysis. Moreover, we intended to test the reliability and then to explore the feasibility of using HU instead of mBD values for age estimation. We built retrospectively a reference sample of 400 pubic symphyses using computed tomography at a French hospital and a test sample of 120 pubic symphyses. Equations were created to establish linear regression models for age estimation. Inaccuracy and bias were calculated for individuals aged more or less than 40 years. We highlighted homogeneous mean absolute errors for both HU and mBD values, most of them being less than 10 years. Moreover, we reported a moderate overestimation for younger individuals and a very small underestimation for older individuals. This study proposes a correlation between the bone density and age of individuals with a valuable level of reliability. Finally, HU measurements seem to be suitable for linking bone density with the age of individuals in forensic practice.

Purpose: Bone drilling is a major part of orthopaedic surgery performed during the internal fixation of fractured bones. At present, information related to drilling force, drilling torque, rate of drill-bit penetration and drill-bit rotational speed is not available to orthopaedic surgeons, clinicians and researchers as bone drilling is performed manually., Methods: This study demonstrates that bone drilling force data if recorded in-vivo, during the repair of bone fractures, can provide information about the quality of the bone. To understand the variability and anisotropic behaviour of cortical bone tissue, specimens cut from three anatomic positions of pig and bovine were investigated at the same drilling speed and feed rate., Results: The experimental results showed that the drilling force does not only vary from one animal bone to another, but also vary within the same bone due to its changing microstructure. Drilling force does not give a direct indication of bone quality; therefore it has been correlated with screw pull-out force to provide a realistic estimation of the bone quality. A significantly high value of correlation (r2 = 0.93 for pig bones and r2 = 0.88 for bovine bones) between maximum drilling force and normalised screw pull-out strength was found., Conclusions: The results show that drilling data can be used to indicate bone quality during orthopaedic surgery.

Background and Aims: Disentangling tree growth requires more than ring width data only. Densitometry is considered a valuable proxy, yet laborious wood sample preparation and lack of dedicated software limit the widespread use of density profiling for tree ring analysis. An X-ray computed tomography-based toolchain of tree increment cores is presented, which results in profile data sets suitable for visual exploration as well as density-based pattern matching., Methods: Two temperate (Quercus petraea, Fagus sylvatica) and one tropical species (Terminalia superba) were used for density profiling using an X-ray computed tomography facility with custom-made sample holders and dedicated processing software., Key Results: Density-based pattern matching is developed and able to detect anomalies in ring series that can be corrected via interactive software., Conclusions: A digital workflow allows generation of structure-corrected profiles of large sets of cores in a short time span that provide sufficient intra-annual density information for tree ring analysis. Furthermore, visual exploration of such data sets is of high value. The dated profiles can be used for high-resolution chronologies and also offer opportunities for fast screening of lesser studied tropical tree species., (© The Author 2016. Published by Oxford University Press on behalf of the Annals of Botany Company. All rights reserved. For Permissions, please email: journals.permissions@oup.com.)

Heterochromatic flicker photometry (HFP) is the most common technique of measuring macular pigment optical density (MPOD). Some data strongly suggest that HFP samples MPOD specifically at the edge of center-fixated circular stimuli. Other data have led to the conclusion that HFP samples over the entire area of the stimulus. To resolve this disparity, MPOD was measured using HFP and a series of solid discs of varying radii (0.25 to 2.0 deg) and with thin annuli corresponding to the edge of those discs. MPOD assessed with the two methods yielded excellent correspondence and linearity: Y=0.01+0.98X , r=0.96. A second set of experiments showed that if a disc stimulus is adjusted for no-flicker (the standard procedure) and simply reduced in size, no flicker is observed despite the higher level of MPOD in the smaller area. Taken together, these results confirm that MPOD is determined at the edge of the measuring stimulus when using stimulus sizes in the range that is in dispute (up to a radius of 0.75 deg). The basis for this edge effect can be explained by quantitative differences in the spatial-temporal properties of the visual field as a function of angular distance from the fixation point.

Purpose: Heterochromatic flicker photometry (HFP) is commonly used to determine macular pigment optical density (MPOD). Since HFP in this application is a locus comparison method, an identical relative spectral response at each locus is required for a perfect measure. We know this requirement cannot be strictly true since the optical density of photopigments increases as the foveal center is approached. Thus, the self-screening effect would result in an underestimate of MPOD. An earlier study concluded that the underestimate is on the order of 30%. We examined this issue by manipulating photopigment optical density, and consequently the degree of selfscreening., Methods: A continuously exposed, 470 nm, background bleached cone photopigments over a range from 0 to 80%. MPOD was determined 10' and 30' from the foveal center. Two subjects were used in the main experiment. Five additional subjects were studied with just the 0% and 80% bleach levels. Spectral measures were obtained at 0% and 70% bleach levels for the two primary subjects., Results: Subjects in the main experiment showed MPOD estimates that increased with increasing bleaching. The effect, however, was small: one observer's MPOD increased 0.08 and 0.02 for the 10' and 30' loci, respectively; the other observer's values were 0.04 and 0.01 for the same loci. Comparable values were obtained for the other five subjects using the 0% and 80% bleach conditions. Spectral measures were consistent with the findings of the main experiment., Conclusions: When self-screening is nearly abolished (80% bleach), a relatively small underestimation is revealed for the unbleached state. For the 1° target we show about 2-3% underestimation. Our 20' target reveals a larger underestimate (8-9%), consistent with longer photoreceptor outer-segments nearer the foveal center. We conclude that HFP yields values essentially independent of self-screening for targets of 1° diameter or greater. Smaller targets are less than 10% underestimated for near-zero bleach conditions., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Quantitative analysis of electrophoresis gels is an important part in molecular cloning, as well as in protein expression and purification. Parallel quantifications in yield and purity can be most conveniently obtained from densitometric analysis. This communication reports a comprehensive, reliable and simple protocol for gel quantification and documentation, applicable for single samples and with special features for protein expression screens. As major component of the protocol, the fully annotated code of a proprietary open source computer program for semi-automatic densitometric quantification of digitized electrophoresis gels is disclosed. The program ("GelQuant") is implemented for the C-based macro-language of the widespread integrated development environment of IGOR Pro., (Copyright © 2014 Elsevier Inc. All rights reserved.)

Mass sensing with nanoelectromechanical systems has advanced significantly during the last decade. With nanoelectromechanical systems sensors it is now possible to carry out ultrasensitive detection of gaseous analytes, to achieve atomic-scale mass resolution and to perform mass spectrometry on single proteins. Here, we demonstrate that the spatial distribution of mass within an individual analyte can be imaged--in real time and at the molecular scale--when it adsorbs onto a nanomechanical resonator. Each single-molecule adsorption event induces discrete, time-correlated perturbations to all modal frequencies of the device. We show that by continuously monitoring a multiplicity of vibrational modes, the spatial moments of mass distribution can be deduced for individual analytes, one-by-one, as they adsorb. We validate this method for inertial imaging, using both experimental measurements of multimode frequency shifts and numerical simulations, to analyse the inertial mass, position of adsorption and the size and shape of individual analytes. Unlike conventional imaging, the minimum analyte size detectable through nanomechanical inertial imaging is not limited by wavelength-dependent diffraction phenomena. Instead, frequency fluctuation processes determine the ultimate attainable resolution. Advanced nanoelectromechanical devices appear capable of resolving molecular-scale analytes., Competing Interests: The authors declare no competing financial interests.

Direct measurements of solar ultraviolet radiations (UVRs) have an important role in the protection of humans against UVR hazard. This work presents simple technique based on the application of EBT2 GAFCHROMIC(®) film for direct solar UVA dose assessment. It demonstrates the effects of different parts of the solar spectrum (UVB, visible and infrared) on performed UVA field measurements and presents the measurement uncertainty budget. The gradient of sunlight exposure level permitted the authors to establish the mathematical relationships between the measured solar UVA dose and two measured quantities: the first was the changes in spectral absorbance at the wavelength 633 nm (A633) and the second was the optical density (OD). The established standard relations were also applied to calculate the solar UVA dose variations during the whole day; 15 min of exposure each hour between 8:00 and 17:00 was recorded. Results show that both applied experimental methods, spectrophotometer absorbance and densitometer OD, deliver comparable figures for EBT2 solar UVA dose assessment with relative uncertainty of 11% for spectral absorbance measurements and 15% for OD measurements., (© The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.)

Reduced bone stock can result in fractures that mostly occur in the spine, distal radius, and proximal femur. In case of operative treatment, osteoporosis is associated with an increased failure rate. To estimate implant anchorage, mechanical methods seem to be promising to measure bone strength intraoperatively. It has been shown that the mechanical peak torque correlates with the local bone mineral density and screw failure load in hip, hindfoot, humerus, and spine in vitro. One device to measure mechanical peak torque is the DensiProbe (AO Research Institute, Davos, Switzerland). The device has shown its effectiveness in mechanical peak torque measurement in mechanical testing setups for the use in hip, hindfoot, and spine. In all studies, the correlation of mechanical torque measurement and local bone mineral density and screw failure load could be shown. It allows the surgeon to judge local bone strength intraoperatively directly at the region of interest and gives valuable information if additional augmentation is needed. We summarize methods of this new technique, its advantages and limitations, and give an overview of actual and possible future applications., (Copyright © 2015 The International Society for Clinical Densitometry. Published by Elsevier Inc. All rights reserved.)

A new simple and rapid TLC-densitometric procedure for the separation and identification of betamethasone and its related substances, betamethasone-17,21-dipropionate, betamethasone-17-valerate, betamethasone-21-valerate and also betamethasone disodium phosphate was developed. One of the chromatographic systems proposed in this study, which has been satisfactory applied in separation of four pairs of examined compounds was silica gel 60F254 (E. Merck, Art. 1.05554) and a mixture containing chloroform-methanol-acetic acid (99.5%) in volume composition 28:5:0.5. Densitometric measurements were done using densitometer TLC Scanner 3 at 246 nm. The proposed method was checked in terms of its specificity for the determination of betamethasone-17,21-dipropionate and betamethasone disodium phosphate in commercially available products containing both compounds, separately, as active ingredients. The results showed that the method is suitable for qualitative analysis of betamethasone derivatives in simple and combined pharmaceuticals in various dosage forms e.g., lotion and injection solution. It also can be applied in quality control of pharmaceutical formulations of betamethasone and its related compounds in form of salts and esters.

In the context of this work we evaluated a multisensory, noninvasive prototype platform for shake flask cultivations by monitoring three basic parameters (pH, pO2 and biomass). The focus lies on the evaluation of the biomass sensor based on backward light scattering. The application spectrum was expanded to four new organisms in addition to E. coli K12 and S. cerevisiae [1]. It could be shown that the sensor is appropriate for a wide range of standard microorganisms, e.g., L. zeae, K. pastoris, A. niger and CHO-K1. The biomass sensor signal could successfully be correlated and calibrated with well-known measurement methods like OD600, cell dry weight (CDW) and cell concentration. Logarithmic and Bleasdale-Nelder derived functions were adequate for data fitting. Measurements at low cell concentrations proved to be critical in terms of a high signal to noise ratio, but the integration of a custom made light shade in the shake flask improved these measurements significantly. This sensor based measurement method has a high potential to initiate a new generation of online bioprocess monitoring. Metabolic studies will particularly benefit from the multisensory data acquisition. The sensor is already used in labscale experiments for shake flask cultivations.

Tilted fiber Bragg grating (TFBG) biosensors can be used as a cost-effective and relatively simple-to-implement alternative to well established biosensor platforms for high sensitivity biological sample measurements in situ or possibly in vivo. The fiber biosensor presented in this study utilizes an in-fiber 12° tilted Bragg grating to excite a strong evanescent field on the surface of the sensor over a large range of external medium refractive indices. The devices have minimal cross-sensitivity to temperature and their fabrication does not impact the structural integrity of the fiber and its surface functionalization. Human acute leukemia cells with different intracellular densities and refractive index (RI) ranging from 1.3342 to 1.3344 were clearly discriminated in-situ by using the differential transmission spectrum between two orthogonal polarizations for the last guided mode resonance before "cut-off", with an amplitude variation sensitivity of 1.8 × 10(4) dB/RIU, a wavelength shift sensitivity of 180 nm/RIU, and a limit of detection of 2 × 10(-5)RIU. The detection process was precisely controlled with a micro-fluidic chip which allows the measurement of nL-volumes of bio-samples. The proposed in-fiber polarimetric biosensor is an appealing solution for rapid, sub-microliter dose and highly sensitive detection of analytes at low concentrations in medicine, chemical and environmental monitoring., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Purpose: To evaluate the repeatability of different lens densitometry analysis modes performed with Scheimpflug imaging using the Pentacam HR device., Setting: University eye hospital, Frankfurt am Main, Germany., Design: Cross-sectional study., Methods: Eyes were analyzed under mydriasis during 2 examinations performed by the same examiner. Three single measurements were taken to assess lens densitometry via 3 modes as follows: peak (maximum), linear (vertical axis), and 3-dimensional (3-D). Measurements were also taken using 3 cylindrical reference blocks (P) with different diameters (2.0 mm, 4.0 mm, 6.00 mm) composing the whole lens depth. Repeatability was tested using Bland-Altman analysis. As statistical parameters, the coefficient of repeatability (CoR) and the relative repeatability (RR) were applied., Results: The study analyzed 105 eyes. The CoR of the peak modus was 5.6 (RR, 29.8%); of the linear modus, 0.9 (RR, 8.8%); and of the 3-D modus, 0.36 (RR, 3.6%). The values of the P mode were lower, with a CoR between 0.19 and 0.30 (RR, 2.1%-3.3%)., Conclusions: Lens densitometry using Scheimpflug imaging was highly repeatable. However, repeatability was dependent on the analysis mode used. Repeatability decreased with increasing opacification., (Copyright © 2014 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.)

Photo-acoustic (PA) imaging was combined with skeletal quantitative ultrasound (QUS) for assessment of human long bones. This approach permitted low-frequency excitation and detection of ultrasound so as to efficiently receive the thickness-sensitive fundamental flexural guided wave (FFGW) through a coating of soft tissue. The method was tested on seven axisymmetric bone phantoms, whose 1- to 5-mm wall thickness and 16-mm diameter mimicked those of the human radius. Phantoms were made of a composite material and coated with a 2.5- to 7.5-mm layer of soft material that mimicked soft tissue. Ultrasound was excited with a pulsed Nd:YAG laser at 1064-nm wavelength and received on the same side of the coated phantom with a heterodyne interferometer. The FFGW was detected at 30-kHz frequency. Fitting the FFGW phase velocity by the FLC(1,1) tube mode provided an accurate (9.5 ± 4.0%) wall thickness estimate. Ultrasonic in vivo characterization of cortical bone thickness may thus become possible., (Copyright © 2014 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.)

Innovations in international health require the use of state-of-the-art technology to enable clinical chemistry for diagnostics of bodily fluids. We propose the implementation of a portable and affordable lock-in amplifier-based instrument that employs digital technology to perform biochemical diagnostics on blood, urine, and other fluids. The digital instrument is composed of light source and optoelectronic sensor, lock-in detection electronics, microcontroller unit, and user interface components working with either power supply or batteries. The instrument performs lock-in detection provided that three conditions are met. First, the optoelectronic signal of interest needs be encoded in the envelope of an amplitude-modulated waveform. Second, the reference signal required in the demodulation channel has to be frequency and phase locked with respect to the optoelectronic carrier signal. Third, the reference signal should be conditioned appropriately. We present three approaches to condition the signal appropriately: high-pass filtering the reference signal, precise offset tuning the reference level by low-pass filtering, and by using a voltage divider network. We assess the performance of the lock-in instrument by comparing it to a benchmark device and by determining protein concentration with single-color absorption measurements. We validate the concentration values obtained with the proposed instrument using chemical concentration measurements. Finally, we demonstrate that accurate retrieval of phase information can be achieved by using the same instrument.

To report a case of archipelago keratitis and its improvement as evaluated by corneal densitometry. A review of the patient's record and relevant literature. A 57-year-old man presented with blurred vision associated with photophobia and halos around lights. Slit-lamp examination revealed multiple confluent, nummular subepithelial infiltrates. The infiltrates were unresponsive to topical nonsteroidal anti-inflammatory drops. The treatment was changed to topical steroids and oral acyclovir and a diagnosis of archipelago keratitis was made. The patient showed quick response to the treatment and the infiltrates disappeared within 5 weeks. However, no clear changes were observed initially by slit-lamp but corneal densitometry allowed us to evaluate improvement as the density value decreased from 96.5 to 38.6. After 10 days of treatment all the symptoms were resolved. Archipelago keratitis responded well to topical steroids and oral acyclovir. We describe the use of corneal densitometry complementary to slit-lamp examination in the clinical observation of archipelago keratitis.

This paper presents an optical system called MacPI, which implements a two-color reflectance technique in combination with various hardware and software tools to assess objectively the macular pigment (MP) optical density in vivo. The system consists of a bespoke optical design, a control architecture, driver electronics, a collection of image-processing techniques, and a graphical user interface. The deficiencies of the technique employed and the solutions implemented in the MacPI system to confront those inherent frailties are presented. An overview of the effective interpretation of the acquired data and the techniques employed by MacPI in the acquisition of that data is discussed. The result of a comparison trial with an alternative device is also presented. We suggest that appropriate design of the hardware and an efficient interpretation of the acquired data should produce a system capable of consistent, accurate, and rapid measurements, while retaining the distinction of ease of use, portability, comfort for the subject, and a design that is economic to produce. Its versatility should allow both for a clinical screening application and for further investigation and establishment of the physiological role of the MP in a laboratory-based environment.

This paper presents a review and analysis of the research that has been carried out on dynamic calibration for optical-fiber solids concentration probes. An introduction to the optical-fiber solids concentration probe was given. Different calibration methods of optical-fiber solids concentration probes reported in the literature were reviewed. In addition, a reflection-type optical-fiber solids concentration probe was uniquely calibrated at nearly full range of the solids concentration from 0 to packed bed concentration. The effects of particle properties (particle size, sphericity and color) on the calibration results were comprehensively investigated. The results show that the output voltage has a tendency to increase with the decreasing particle size, and the effect of particle color on calibration result is more predominant than that of sphericity.

Aim: To identify a means to objectively measure corneal clouding in patients with mucopolysaccharidosis in a prospective controlled clinical trial., Methods: Corneal haze was assessed by slit lamp examination and measured using the densitometry programme of the Pentacam, a rotating Scheimpflug camera in 33 mucopolysaccharidoses (MPS) patients and 32 controls., Results: Pentacam measurements were available in 31 right and 31 left eyes of 32 patients and in 32 left and right eyes of 32 subjects in the control group. Slit lamp findings correlated very well with corneal density measurements (Spearman correlation right eye (OD)/left eye (OS)=0.782/0.791). MPS patients had higher density units (median OD/OS=14.1/14.7) than control subjects (median OD/OS=6.7/6.9, p<0.001). In patients, the corneal centre density values (median OD/OS=13.8/14.0) did not differ from corneal periphery values (median OD/OS=14.3/14.7)., Conclusions: The densitometry programme of the Pentacam provides objective measurement of corneal haze in mucopolysaccharidosis patients.

Cysteine cathepsins are a family of proteases identified in cancer, atherosclerosis, osteoporosis, arthritis, and a number of other diseases. As this number continues to rise, so does the need for low cost, broad use quantitative assays to detect their activity and can be translated to the clinic in the hospital or in low resource settings. Multiplex cathepsin zymography is one such assay that detects subnanomolar levels of active cathepsins K, L, S, and V in cell or tissue preparations observed as clear bands of proteolytic activity after gelatin substrate SDS-PAGE with conditions optimal for cathepsin renaturing and activity. Densitometric analysis of the zymogram provides quantitative information from this low cost assay. After systematic modifications to optimize cathepsin zymography, we describe reduced electrophoresis time from 2 h to 10 min, incubation assay time from overnight to 4 h, and reduced minimal tissue protein necessary while maintaining sensitive detection limits; an evaluation of the pros and cons of each modification is also included. We further describe image acquisition by Smartphone camera, export to Matlab, and densitometric analysis code to quantify and report cathepsin activity, adding portability and replacing large scale, darkbox imaging equipment that could be cost prohibitive in limited resource settings.

A hybrid fs/ps pure-rotational CARS scheme is characterized in furnace-heated air at temperatures from 290 to 800 K. Impulsive femtosecond excitation is used to prepare a rotational Raman coherence that is probed with a ps-duration beam generated from an initially broadband fs pulse that is bandwidth limited using air-spaced Fabry-Perot etalons. CARS spectra are generated using 1.5- and 7.0-ps duration probe beams with corresponding coarse and narrow spectral widths. The spectra are fitted using a simple phenomenological model for both shot-averaged and single-shot measurements of temperature and oxygen mole fraction. Our single-shot temperature measurements exhibit high levels of precision and accuracy when the spectrally coarse 1.5-ps probe beam is used, demonstrating that high spectral resolution is not required for thermometry. An initial assessment of concentration measurements in air is also provided, with best results obtained using the higher resolution 7.0-ps probe. This systematic assessment of the hybrid CARS technique demonstrates its utility for practical application in low-temperature gas-phase systems.

Techniques in bone densitometry have made remarkable progress in the past quarter-century and are now widely used in the daily practice of osteoporosis. Since the skeletal site and the method of measurement differ among the type of equipments, several types are adopted to suit the situation of each medical institute. Central DXA is used to provide a thorough examination of osteoporosis in large hospitals, whereas in general clinics the radial DXA or radiographic photodensitometry of metacarpus is mainly used. Quantitative ultrasound of calcaneus is mostly used for screening osteoporosis. DXA is also going to be applied to vertebral fracture assessment, hip structural analysis and micro-architectural analysis of vertebral trabecular bone.

Background: Several methods have been proposed for measuring macular pigment optical density (MPOD). To date, none of the realized techniques can be considered as "gold standard". A key issue for the clinical applicability of a method is its repeatability. In this study, we investigated short- and mid-term repeatability of MPOD measurements using reflectometry., Methods: A total of 12 healthy young subjects were measured 5 times on 5 consecutive days. Repeatability over 6 months was investigated in patients with AMD. The data in AMD patients were taken from a recently published placebo controlled study investigating the effect of lutein supplementation on MPOD (n = 37; [1]). Four measurements over 6 months were used to calculate repeatability. Spectral fundus reflectance of the fovea was measured in a 2.3° detection field with a custom-built fundus reflectometer. Calculation of MPOD was based on a previously published fundus reflectance model., Results: The coefficients of variation were 6.2 ± 2.4% and 8.0 ± 5.5% in the healthy and AMD group, respectively. Bland-Altman plots indicate that the difference between measurements at day 1 and day 5 in healthy subjects and day 1 and month 6 in AMD patients was small. The maximum deviation in MPOD in a healthy subject was 0.07 (22.6%), and 0.17 (51.5%) in a patient with AMD., Conclusions: Reflectometry provides adequate short-term and mid-term repeatability for measuring MPOD. Accordingly, the technique makes it possible to monitor MPOD in patients with AMD and to study the influence of supplementation in these subjects. In addition, the variability of the technique is small enough to allow for clinical trials with reasonable sample size.

Purpose: Previous studies have reported an age-dependent decline of macular pigment optical density (MPOD) as well as a relative lack of MPOD in age-related macular degeneration (AMD). Results are, however, strongly dependent on the technique used. In this study, we investigated the age dependence of MPOD using spectral fundus reflectance. In addition, we hypothesized that patients with AMD have a reduced MPOD as compared to healthy controls., Methods: A total of 85 healthy subjects and 96 patients with AMD were included in this study. The healthy control subjects showed a wide range of ages (mean, 51.6 years; range, 21-79years). Patients with AMD were significantly older (mean, 71.2 years; range, 50-89 years). Spectral fundus reflectance of the fovea was measured in a 2.3° detection field with a custom built fundus reflectometer. Calculation of MPOD was based on a previously published fundus reflectance model., Results: Patients with AMD showed a reduced MPOD (0.35 ± 0.12) as compared to the healthy control group (0.39 ± 0.12, p = 0.013 between groups). No age dependence of MPOD (r = -0.14, p = 0.19) was found in the healthy control group. In the AMD group, however, MPOD declined with age (r = -0.24, p = 0.019)., Conclusions: This study indicates that MPOD is reduced in patients with AMD. In addition, the data of this study indicate that MPOD is age dependent in AMD patients, but not in healthy controls. Taken together with data indicating that lutein supplementation increases MPOD, this provides a rationale for supplementation of the macular pigments in patients with AMD, although long-term clinical outcome data are lacking., (© 2012 The Authors. Acta Ophthalmologica © 2012 Acta Ophthalmologica Scandinavica Foundation.)

This study evaluated the radiopacity of different shades of resin-based restorative materials and compared the results to human and bovine dental hard tissues. Disk specimens 6 mm in diameter and 1 mm thick (N = 220, n = 10) were prepared from the following restorative materials: · eight shades of nanofilled composite (Aelite Aesthetic Enamel), · seven shades of nanohybrid composite (Grandio Universal), · six shades of photopolymerized polyacid modified compomer (Glasiosite), and · one shade of hybrid composite (X-tra fil U). Human canine dentin (n = 10), bovine enamel (n = 10), and an aluminum (Al) step wedge were used as references. The optical density values of each material were measured from radiographic images using a transmission densitometer. Al step wedge thickness and optical density values were plotted, and equivalent Al thickness (eq Al) values were determined for radiopacity measurements of each material. The data were analyzed using a non-parametric one-way ANOVA (Kruskal-Wallis), and multiple comparisons were made with a Student-Newman-Keuls post hoc test (a = 0.05). Different shades of resin-based restorative materials tested did not reveal statistically significant differences within each material group (p > 0.05). Radiopacity values of the resin-based restorative materials investigated varied depending on their types; however, within different shades of one material type, radiopacity values were comparable. Every shade of nanocomposite material other than Aelite Aesthetic Enamel Incisal LT Gray showed comparable radiopacity to human dentin. Other materials tested demonstrated higher radiopacity compared to human dentin and bovine enamel.

Purpose: Of the antioxidants found in the human retina, only the macular carotenoid quantities can be estimated noninvasively (albeit in a collective fashion), thus facilitating study of their role in that tissue. The aim of this study was to evaluate concordance between macular pigment optical density (MPOD) values recorded on a commercially available instrument, the MPS 9000, with those of an already validated heterochromatic flicker photometry instrument. Also, we assessed and compared test-retest variability for each instrument., Methods: Macular pigment optical density at 0.5 retinal eccentricity was measured using two different heterochromatic flicker photometers, the MPS 9000 and the Macular Densitometer(TM), in 39 healthy subjects. Test-retest variability was evaluated separately for each instrument by taking three readings over a 1-week period in 25 subjects., Results: There was a moderate positive correlation for MPOD at 0.5° of retinal eccentricity between the MPS 9000 and the Macular Densitometer described by the linear equation y = 0.763x + 0.172 (r = 0.68, p < 0.001, r(2) = 0.46); however, a paired-samples t-test showed a significant difference in terms of mean values, with a bias of lower MPOD values being yielded by the MPS 9000 (t = -4.103, p < 0.001). Bland-Altman analysis indicated only moderate agreement between the two instruments, reflected in 95% limits of agreement of 0.1 ± 0.27. Inter-sessional repeatability, expressed as a coefficient of repeatability, ranged from 0.18 to 0.21 [mean (±SD): 0.19 (0.02)] for the MPS 9000 and from 0.11 to 0.12 [mean (±SD): 0.12 (0.01)] for the Macular Densitometer., Conclusion: The results demonstrate that the MPS 9000 consistently yields MPOD readings, which are lower than that found with the Macular Densitometer, and exhibits substantial test-retest variability., (© 2011 The Authors. Acta Ophthalmologica © 2011 Acta Ophthalmologica Scandinavica Foundation.)

This paper describes a method for the preparation of (125)I sources for their use in bone densitometer. The process consists of preparation of silver pellets of size ∼2.5 mm (ϕ) × 0.6 mm (l) by 'Cold die compaction technique', palladium coating of the silver pellets, adsorption of (125)I on the palladium coated silver pellets and encapsulation source matrix in a titanium capsule [ 3 mm (ϕ) × 10 mm(l)] using Nd:YAG laser. The texture and morphology of the source matrix were examined by SEM and EDS analyses. Encapsulated sources containing (125)I activity up to ∼1.85 GBq (50 mCi) were prepared. Quality control tests that were necessary before application were performed and gave satisfactory results., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

This study evaluated the radiopacity of different resin-based luting materials and compared the results to human and bovine dental hard tissues. Disc specimens (N=130, n=10 per group) (diameter: 6 mm, thickness: 1 mm) were prepared from 10 resin-based and 3 conventional luting cements. Human canine dentin (n=10), bovine enamel (n=10), bovine dentin (n=10) and Aluminium (Al) step wedge were used as references. The optical density values of each material were measured from radiographic images using a transmission densitometer. Al step wedge thickness and optical density values were plotted and equivalent Al thickness values were determined for radiopacity measurements of each material. The radiopacity values of conventional cements and two resin luting materials (Rely X Unicem and Variolink II), were significantly higher than that of bovine enamel that could be preferred for restorations cemented on enamel. Since all examined resin-based luting materials showed radiopacity values equivalent to or greater than that of human and bovine dentin, they could be considered suitable for the restorations cemented on dentin.

In many biomedical studies, the density of a biological system is of great importance to investigate its structure or functioning. In the present work, for the density measurement of lung phantom, the scattering of 59.54 and 662keV gamma photons are studied using HPGe and NaI(Tl) detectors, respectively. Phantoms simulating lung density are prepared by mixing appropriate amount of saw dust and distilled water. The regression lines, obtained from experimental data of scattered spectra, provide the amount of excessive water storage in lungs, hence the technique has the potential for a measure of pathological state like pulmonary edema. The technique is quite sensitive for small change (∼23Kgm(-3)) in the density of lung phantom. Also, Compton scatter profile measurements (in case of 59.54keV) results that the technique is less sensitive beyond chest wall thickness of ∼26mm due to overlying scatter components in the measured spectrum. A portable non-invasive system described presently may be used for various industrial applications also., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

Purpose: To establish a simple method to determine breast readout accuracy on mammography units., Methods: A thickness measuring device (TMD) was used in conjunction with a breast phantom. This phantom had compression characteristics similar to human female breast tissue. The phantom was compressed, and the thickness was measured using TMD and mammography unit readout. Measurements were performed on a range of screen film mammography (SFM) and full-field digital mammography (FFDM) units (8 units in total; 6 different models/manufacturers) for two different sized paddles and two different compression forces (60 and 100 N)., Results: The difference between machine readout and TMD for the breast area, when applying 100 N compression force, for nonflexible paddles was largest for GE Senographe DMR+ (24 cm × 30 cm paddle: +14.3%). For flexible paddles the largest difference occurred for Hologic Lorad Selenia (18 cm × 24 cm paddle: +26.0%)., Conclusions: None of the units assessed were found to have perfect correlation between measured and readout thickness. TMD measures and thickness readouts were different for the duplicate units from two different models/manufacturers.

This paper discusses a method to determine the thickness of an absorber using the energy distribution of beta particles. An empirical relationship was obtained between the absorber thickness and the energy distribution of beta particles transmitted through. The thickness of a polyethylene radioactive source cover was determined by exploiting this relationship, which has largely been left unexploited allowing us to determine the in-situ cover thickness of beta sources in a fast, cheap and non-destructive way., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

Purpose: To evaluate changes in anterior corneal optical density and the refractive index after photorefractive keratectomy (PRK) using a rotating Scheimpflug system., Setting: Department of Ophthalmology, University Federico II, Naples, Italy., Design: Comparative case series., Methods: Anterior corneal optical density was evaluated with a rotating Scheimpflug system at baseline and 3 months and 12 months after PRK in eyes with a refractive error between -6.00 diopters (D) and -12.00 D (study group). A control group of unoperated eyes with the same refraction range was used to calculate corneal optical density and the Gladstone-Dale constant in unoperated eyes using the Gladstone-Dale formula. In the study group, changes in the anterior corneal optical density were evaluated over time and variations in the anterior corneal refractive index were obtained using the Gladstone-Dale constant., Results: The study group comprised 37 eyes and the control group, 200 eyes. In the study group, the mean anterior corneal optical density and refractive index, respectively, were 27.71 ± 4.39 and 1.360 ± 0.05 at baseline, 37.812 ± 12.31 and 1.491 ± 0.16 after 3 months (P<.001 compared with baseline), and 26.29 ± 4.93 and 1.341 ± 0.06 after 12 months (P=.03 compared with baseline). The mean corneal optical density in the control group was 27.71 ± 4.31 (SD), and the resultant Gladstone-Dale constant was 0.013., Conclusion: An early increase and a subsequent reduction in anterior corneal optical density and the refractive index were present in myopic eyes during 1 year after PRK., (Copyright © 2011 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.)

The delivered dose of high-energy photon beams is measured with radiochromic film. Previous studies sought to improve the system sensitivity of radiochromic film dosimetry by use of band-pass filters. However, band-pass filters reduce the scanning light intensity. To avoid a reduction of the signal-to-noise ratio, one must increase the scanner light intensity. Our purposes in this study were to develop an optical system model of GAFCHROMIC EBT2 radiochromic film dosimetry, and to estimate the system sensitivity characteristics by employing a combination of band-pass filters and scanner light intensities. The spectra of the scanner light source, band-pass filter, and irradiated EBT2 films were measured with a spectrometer. Meanwhile, the intensity of a light path from the scanner light source to the scanner detector was simulated. Then, the dose-response curves were computed with six simulated virtual band-pass filters of varying bandwidth. The simulated dose-response curves were in good agreement with the experimental values. The slope of the simulated dose-response curve was steeper when a filter of narrower bandwidth was used; however, at the same time, saturation was observed at a lower dose. For achieving the same dose response as was observed without a band-pass filter, it was necessary to increase the scanner light intensity. We proved that our proposed optical system model was valid, suggesting that a realistic simulation may be feasible with the proposed model. For improvement of the system sensitivity of radiochromic film dosimetry, it is necessary to select a well-balanced combination of band-pass filter and scanner light intensity.

It is one of the most important challenges for preventing hip fractures to establish an accurate non-invasive assessment of hip fracture risk. Quantitative computed tomography (QCT) is able to analyze not only volumetric bone mineral density (mg/cm3) of trabecular and cortical bone compartment separately, but also geometry and biomechanical parameters in bone such as cross-sectional area, cortical bone thickness, section modulus, buckling ratio etc. The analysis of geometry and biomechanical parameters at hip could provide better prediction of hip fracture risk, better understanding pathogenesis of hip fractures, and thus better selection of drug and/or lifestyle-based interventions.

Conventional radiographic methods allow physicians to visualize bone structure. However, they do not offer information on the bone mineral density (BMD), which can facilitate early diagnosis and treatment of osteoporosis. Bone densitometry, by contrast, helps to detect bone mineral loss at an early stage because it provides accurate quantitative measurement of BMD. With an emphasis on quantification, shorter scanning time and precision, scientists have been developing BMD measurement devices that use absorption technique. They first developed single-energy absorptiometry (single-photon absorptiometry) by using I-125, which could measure BMD of peripheral bones. Single-photon absorptiometry was replaced by dual-energy absorptiometry (dual photon absorptiometry [DPA]) that used gadolinium-153. DPA had greater accuracy in measuring the BMD of central skeletal bones. Single-energy x-ray absorptiometry was also developed but it had limitations in measuring central skeletal BMD. In the mid-1980s, dual-energy x-ray absorptiometry (DXA) was introduced and widely accepted for the early detection, treatment, and follow-up study of osteoporosis. There are several reasons for the popularity. DXA can measure BMD of posteroanterior spine and hip in a much shorter time than DPA while being capable of measuring BMD of peripheral bones. Other advantages include very low radiation doses to the patients, high image resolution, precision, and stable calibration of the instruments. In recent years, DXA has also been applied to lateral spine for the density of trabecular bone, to the whole body for the measurement of total body bone density and for the body composition, and to the spine for the vertebral fracture assessment. Still, posteroanterior spine and hip scans remain the most common applications of DXA because data on the normal range of BMD of the skeletal sites for different age, sex, and ethnic groups are compiled and made available with the devices, which gives the physician the advantage of an immediate diagnosis., (Copyright © 2011 Elsevier Inc. All rights reserved.)

Purpose: The accuracy of QCT-based homogenized finite element (FE) models is strongly related to the accuracy of the prediction of bone volume fraction (BV/TV) from bone mineral density (BMD). The goal of this study was to establish a calibration methodology to relate the BMD computed with QCT with the BV/TV computed with micro-CT (microCT) over a wide range of bone mineral densities and to investigate the effect of region size in which BMD and BV/TV are computed., Methods: Six human vertebral bodies were dissected from the spine of six donors and scanned submerged in water with QCT (voxel size: 0.391 x 0.391 x 0.450 mm3) and microCT (isotropic voxel size: 0.018(3) mm3). The microCT images were segmented with a single level threshold. Afterward, QCT-grayscale, microCT-grayscale, and microCT-segmented images were registered. Two isotropic grids of 1.230 mm (small) and 4.920 mm (large) were superimposed on every image, and QCT(BMD) was compared both with microCT(BMD) and microCT(BV/TV) for each grid cell., Results: The ranges of QCT(BMD) for large and small regions were 9-559 mg/cm3 and -90 to 1006 mg/cm3, respectively. QCT(BMD) was found to overestimate microCT(BMD). No significant differences were found between the QCT(BMD)-microCT(BV/TV) regression parameters of the two grid sizes. However, the R2 was higher, and the standard error of the estimate (SEE) was lower for large regions when compared to small regions. For the pooled data, an extrapolated QCTBMD value equal to 1062 mg/ cm3 was found to correspond to 100% microCT(BV/TV)., Conclusions: A calibration method was defined to evaluate BV/TV from QCTBMD values for cortical and trabecular bone in vitro. The QCT(BMD-microCT(BV/TV) calibration was found to be dependent on the scanned vertebral section but not on the size of the regions. However, the higher SEE computed for small regions suggests that the deleterious effect of QCT image noise on FE modelling increases with decreasing voxel size.

Aim: Bone quality is a main factor in implant fixation. After having shown promising results, we have further investigated the use of the DensiProbe™ as an intraoperative measurement tool for evaluation of calcaneal bone quality and prediction of nailed hindfoot arthrodesis failure., Method: In this add-on study 19 nail arthrodeses were performed using a conventional screw plus a locked blade (n = 6) or plus a locked screw (n = 13) in the calcaneus. A specially devised tool was inserted at the fixation sites of the screws and the cancellous break-away torque was measured. The constructs were then cyclically loaded to failure., Results: We saw a wide range of BMD (1.9-185.9 mgHA/cm³, mean 102.4 mg/cm³, SD 53.5). The peak torque was 0.47-1.78 Nm (mean 0.92 Nm, SD 0.46) at the proximal screw site (PSS) and 0.24 and 1.2 Nm (mean 0.63 Nm, SD 0.37) at the distal screw site (DSS), respectively, and 0.42 and 1.52 Nm (mean 1.00 Nm, SD 0.36) in the screw plus blade group (PSS). The number of cycles correlated with peak torque (two screws group PSS: p = 0.002, r² = DSS: 0.61 p = 0.001, r² = 0.90; screw plus blade group PSS: p = 0.001, r² = 0.99). Peak torque also correlated with BMD in both groups (two screws group PSS: p = 0.01, r² = 0.71; DSS: p = 0.001; r² = 0.83; screw plus blade group PSS: 0.42 and 1.52 Nm, mean 1.00 Nm, SD 0.36)., Conclusion: A mechanical bone measurement tool like the DensiProbe™ seems to be suitable for predicting tibiotalocalcaneal arthrodesis failure in a biomechanical test set-up. As a restriction in clinical practice failure is multifactorial and prediction cannot be based upon these measurements only., (© Georg Thieme Verlag KG Stuttgart · New York.)

In this research work, a semi-automatic densitometry system has been developed for large-scale monitoring services by use of film badge dosemeters. The system consists of a charge-coupled device (CCD)-based scanner that can scan optical densities (ODs) up to 4.2, a computer vision algorithm to improve the quality of digitised films and an analyser program to calculate the necessary information, e.g. the mean OD of region of interest and radiation doses. For calibration of the system, two reference films were used. The Microtek scanner International Color Consortium (ICC) profiler is applied for determining the colour attributes of the scanner accurately and a reference of the density step tablet, Bundesanstalt für Materialforschung und-prüfung (BAM) is used for calibrating the automatic conversion of gray-level values to OD values in the range of 0.2-4.0 OD. The system contributes to achieve more objectives and reliable results. So by applying this system, we can digitise a set of 20 films at once and calculate their relative doses less than about 4 min, and meanwhile it causes to avoid disadvantages of manual process and to enhance the accuracy of dosimetry.

Purpose: To compare the clinical classification of cataract using the Lens Opacities Classification System (LOCS) III with the mean values of lens density provided by the Pentacam Scheimpflug System in nuclear cataracts., Methods: One hundred and one eyes from 101 patients with age-related nuclear cataract were submitted to clinical examination for lens grading score using LOCS III. According to LOCS III, nuclear opalescence was divided in six groups. Patients were evaluated by the Pentacam Scheimpflug System for the mean lens density using the Pentacam lens densitometry program (PLDP), the Pentacam Nucleus Staging (PNS) mean value and the PNS cataract grading score., Results: A positive correlation between the mean values of lens density and LOCS III classification, considering groups 1 to 5, could be noticed with PLDP and PNS mean value. The mean values between the groups were similar using the PLDP and the PNS mean value. However, when the PNS cataract grading score was evaluated, there was low correspondence with LOCS III classification., Conclusion: Pentacam Scheimpflug device offers an objective measure of the lens nuclear density on nuclear cataracts. PLDP and the PNS mean value were both useful to evaluate age-related nuclear cataract up to LOCS III group 5.

The purpose of this study is to demonstrate an application of 2-D high-performance planar chromatography-diode array detector (DAD) and HPLC-DAD after solid-phase extraction (SPE) for identification and quantitative analysis of pesticides (isoproturon, aziprotryne, hexazinone, flufenoxuron, methabenzthiazuron, procymidone, and α-cypermethrin) in Melissa officinalis L. (Labiatae) samples. The procedure described for the determination of compounds is inexpensive and can be applied to routine analysis of analytes in medical herbs' samples after preliminary cleanup and concentration by SPE. Average recoveries on C18 SPE cartridges of pesticides eluted with 5 mL tetrahydrofuran by the proposed HPLC-DAD method, before and after 2-D-high-performance planar chromatography separation of analytes from M. officinalis L. samples spiked with pesticide at a concentration level of 10 μg/g in plant material are presented. Method validation parameters for the quantification of pesticides by the proposed HPLC-DAD after SPE method are also presented., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Objective: We evaluated the correlation of the absolute bone mineral density (BMD) values of the lumbar spine and standard sites of the proximal femur obtained from a Lunar Prodigy and the newly developed pencil-beam dual-energy X-ray absorptiometry (Dexxum)., Materials and Methods: Between June 2008 and December 2008, 79 Korean volunteers were enrolled. Measurements were obtained on the same day using both densitometers. The absolute BMD values (g/cm(2)) from the two densitometers were evaluated using Pearson's correlation analysis with Bonferroni's correction for the three clinically important sites. In order to evaluate precision, we performed duplicate Dexxum measurements, and calculated the within-subject coefficient of variation (WSCV)., Results: The Pearson's correlation coefficient (r) of BMD values for the total proximal femur, femoral neck, and lumbar spine by the two densitometers were 0.926, 0.948, and 0.955 respectively, and the null hypotheses of r = 0.8 were all rejected (p < 0.001 by one-sided Z-test with Fisher's z-transformation for each site). The T-scores (r ≧ 0.842) and Z-scores (r ≧ 0.709) also showed strong positive correlations. The duplicate BMD values of Dexxum showed a high level of precision (WSCV ≦ 4.27%)., Conclusion: Dexxum measurements of BMD, T-scores, and Z-scores showed a strong linear correlation with those measured on Lunar Prodigy.

Breast density is a recognized strong and independent risk factor for breast cancer. We propose the use of time-resolved transmittance spectroscopy to estimate breast tissue density and potentially provide even more direct information on breast cancer risk. Time-resolved optical mammography at seven wavelengths (635 to 1060 nm) is performed on 49 subjects. Average information on breast tissue of each subject is obtained on oxy- and deoxyhemoglobin, water, lipids, and collagen content, as well as scattering amplitude and power. All parameters, except for blood volume and oxygenation, correlate with mammographic breast density, even if not to the same extent. A synthetic optical index proves to be quite effective in separating different breast density categories. Finally, the estimate of collagen content as a more direct means for the assessment of breast cancer risk is discussed.

Flatbed scanner densitometers can be operated under various illumination and recording exposure levels. In this work, we show that optical density measurement accuracy, sensitivity, and stability of stained polyacrylamide electrophoresis gel densitometry are crucially dependent on these two factors (brightness and exposure level), notwithstanding that the source is monochromatic, spatially uniform, and the measurements are made using an accurately calibrated step wedge in tandem. We further outline a method to accommodate the intensity deviations over a range of illumination and exposure levels in order to maintain sensitivity and repeatability in the computed optical densities. Comparisons were also made with results from a commercial densitometer.

Many types of bone densitometry equipment are available in Japan, but the numbers of such machines and the numbers of institutions that offer bone densitometry have not been clarified. We analyzed the data from annual surveys conducted by the Japan Osteoporosis Foundation from 1996 to 2006, and we obtained the following results on the use of densitometry equipment: (1) In 1996 there were 6,687 units of bone densitometry equipment in 6,483 institutions in Japan; in 2006 there were 16,371 units in 15,020 institutions. (2) In 2006, of the types of institutions with bone densitometry equipment, the number of clinics was the highest, followed in order by general hospitals, other types of institutions, screening institutions and university hospitals. Rates of increase in the installation of equipment in clinics and other types of institutions were high during the 11-year period from 1996. (3) From 1996 to 2006 the region of interest most frequently used for bone densitometry was the radius. However, during the 11-year period, the proportion of radial densitometry equipment in all institutions with bone densitometry equipment decreased, whereas the proportion of calcaneal densitometry equipment increased. (4) The number of dual-energy X-ray absorptiometry (DXA) units was the highest from 1996 to 2006. However, the proportion of DXA machines in all institutions with bone densitometry equipment decreased over the 11-year period, whereas the proportion of quantitative ultrasound (QUS) machines increased. (5) In 2006, bone densitometry equipment was available in 118 institutions per million Japanese people. Central DXA (spine/hip) equipment was available in 15 per million, radial DXA equipment in 63 per million, and calcaneal QUS equipment in 44 per million. (6) In 2006, among those places with bone densitometry equipment, 46% of university hospitals, 14% of general hospitals, 12% of screening institutions, 5% of clinics, and 6% of other types of institutions possessed more than one type of densitometry equipment. (7) In 2006, central DXA (spine/hip) was frequently available in university hospitals, radial densitometry equipment in general hospitals and clinics, and calcaneal densitometry equipment in screening institutions and other types of institutions.