Search

We describe the case of a rudimentary horn pregnancy coexistent with an intrauterine pregnancy. This situation is usually associated with rupture of the rudimentary horn and death of the correspondent twin. This is the first report on a multiple gestation with the two siblings successfully delivered by caesarean section in the two horns of a unicornuate uterus with rudimentary horn before any complication. Since the maternal mortality is higher in this situation, early ultrasound diagnosis is important to make the right decisions. [Copyright &y& Elsevier]

The subhepatic abscess due to retained fecalith is a rare complication following appendicectomy. The incidence of this complication is probably going to increase due to high rate of laparoscopic appendicectomy. We report 2 cases of subhepatic abscess 1 and 2 years after laparoscopic appendectomies. This potentially serious complication could be preventing with technical recommendations. When it occurs, this complication has to be directly treated by surgical drainage, percutaneous drainage couldn’t be successful because it leaves fecalith in its place which is a cause of recurrence. Our reports are the first to use a laparoscopic treatment of this complication. [Copyright &y& Elsevier]

Parabens are esters of para-hydroxybenzoic acid that have been used as preservatives in many types of products for decades including agrochemicals, pharmaceuticals, food and cosmetics. This illustrative case study with propylparaben (PP) demonstrates a 10-step read-across (RAX) framework in practice. It aims at establishing a proof-of-concept for the value added by new approach methodologies (NAMs) in read-across (RAX) for use in a next-generation risk assessment (NGRA) in order to assess consumer safety after exposure to PP-containing cosmetics. In addition to structural and physico-chemical properties, in silico information, toxicogenomics, in vitro toxicodynamic, toxicokinetic data from PBK models, and bioactivity data are used to provide evidence of the chemical and biological similarity of PP and analogues and to establish potency trends for observed effects in vitro. The chemical category under consideration is short (C1-C4) linear chain n-alkyl parabens: methylparaben, ethylparaben, propylparaben and butylparaben. The goal of this case study is to illustrate how a practical framework for RAX can be used to fill a hypothetical data gap for reproductive toxicity of the target chemical PP., (Copyright © 2022 The Authors. Published by Elsevier Inc. All rights reserved.)

This case study on the model substance caffeine demonstrates the viability of a 10-step read-across (RAX) framework in practice. New approach methodologies (NAM), including RAX and physiologically-based kinetic (PBK) modelling were used to assess the consumer safety of caffeine. Appropriate animal systemic toxicity data were used from the most relevant RAX analogue while assuming that no suitable animal toxicity data were available for caffeine. Based on structural similarities, three primary metabolites of the target chemical caffeine (theophylline, theobromine and paraxanthine) were selected as its most relevant analogues, to estimate a point of departure in order to support a next generation risk assessment (NGRA). On the basis of the pivotal mode of action (MOA) of caffeine and other methylxanthines, theophylline appeared to be the most potent and suitable analogue. A worst-case aggregate exposure assessment determined consumer exposure to caffeine from different sources, such as cosmetics and food/drinks. Using a PBK model to estimate human blood concentrations following exposure to caffeine, an acceptable Margin of Internal Exposure (MOIE) of 27-fold was derived on the basis of a RAX using theophylline animal data, which suggests that the NGRA approach for caffeine is sufficiently conservative to protect human health., (Copyright © 2021. Published by Elsevier Inc.)

Historically, performance of in vitro toxicology test methods has been evaluated and considered for regulatory purposes based on sensitivity & specificity values derived from validation studies. Other indicators are however useful to evaluate in vitro tests such as positive & negative predictive values (PPV & NPV), likelihood ratios (LRs) or odds ratio (OR). These indicators, which are routinely used in diagnostic tests, if adapted and adequately applied to in vitro tests would help determine their realistic predictive power in real world-like situation and help risk assessors know how they can rely on in vitro tests used for their safety assessments. This paper performs a series of simulations considering the actual distribution in ECHA C&L inventory of skin corrosive chemicals to calculate several of these indicators of performance (PPV, NPV, LRs, OR). It shows applied examples of predictive power on EpiSkin™ and SkinEthic™ RHE two validated in vitro skin corrosive tests, explains how to build testing strategies based on these examples, compares so called 'bottom-up' and 'top-down' approaches, and demonstrates the number of tests required, and how risk assessors can practically take advantage of this., (Copyright © 2020. Published by Elsevier Ltd.)

Key Message: The comparison of QTL detection performed on an elite panel and an (elite [Formula: see text] exotic) progeny shows that introducing exotic germplasm into breeding programs can bring new interesting allelic diversity. Selection of stable varieties producing the highest amount of extractable sugar per hectare (ha), resistant to diseases, and respecting environmental criteria is undoubtedly the main target for sugar beet breeding. As sodium, potassium, and [Formula: see text]-amino nitrogen in sugar beets are the impurities that have the biggest negative impact on white sugar extraction, it is interesting to reduce their concentration in further varieties. However, domestication history and strong selection pressures have affected the genetic diversity needed to achieve this goal. In this study, quantitative trait locus (QTL) detection was performed on two populations, an (elite [Formula: see text] exotic) sugar beet progeny and an elite panel, to find potentially new interesting regions brought by the exotic accession. The three traits linked with impurities content were studied. Some QTLs were detected in both populations, the majority in the elite panel because of most statistical power. Some of the QTLs were colocated and had favorable effect in the progeny since the exotic allele was linked with a decrease in the impurity content. A few number of favorable QTLs were detected in the progeny, only. Consequently, introgressing exotic genetic material into sugar beet breeding programs can allow the incorporation of new interesting alleles.

The European Partnership for Alternative Approaches to Animal Testing (EPAA) convened a Partners' Forum on repeated dose toxicity (RDT) testing to identify synergies between industrial sectors and stakeholders along with opportunities to progress these in existing research frameworks. Although RTD testing is not performed across all industrial sectors, the OECD accepted tests can provide a rich source of information and play a pivotal role for safety decisions relating to the use of chemicals. Currently there are no validated alternatives to repeated dose testing and a direct one-to-one replacement is not appropriate. However, there are many projects and initiatives at the international level which aim to implement various aspects of replacement, reduction and refinement (the 3Rs) in RDT testing. Improved definition of use, through better problem formulation, aligned to harmonisation of regulations is a key area, as is the more rapid implementation of alternatives into the legislative framework. Existing test designs can be optimised to reduce animal use and increase information content. Greater use of exposure-led decisions and improvements in dose selection will be beneficial. In addition, EPAA facilitates sharing of case studies demonstrating the use of Next Generation Risk Assessment applying various New Approach Methodologies to assess RDT., (Copyright © 2019 The Authors. Published by Elsevier Inc. All rights reserved.)

Repeated dose toxicity evaluation aims at assessing the occurrence of adverse effects following chronic or repeated exposure to chemicals. Non-animal approaches have gained importance in the last decades because of ethical considerations as well as due to scientific reasons calling for more human-based strategies. A critical aspect of this challenge is linked to the capacity to cover a comprehensive set of interdependent mechanisms of action, link them to adverse effects and interpret their probability to be triggered in the light of the exposure at the (sub)cellular level. Inherent to its structured nature, an ontology addressing repeated dose toxicity could be a scientific and transparent way to achieve this goal. Additionally, repeated dose toxicity evaluation through the use of a harmonized ontology should be performed in a reproducible and consistent manner, while mimicking as accurately as possible human physiology and adaptivity. In this paper, the outcome of a series of workshops organized by Cosmetics Europe on this topic is reported. As such, this manuscript shows how experts set critical elements and ways of establishing a mode-of-action ontology model as a support to risk assessors aiming to perform animal-free safety evaluation of chemicals based on repeated dose toxicity data., (Copyright © 2019. Published by Elsevier Ltd.)

The Threshold of Toxicological Concern (TTC) is an important risk assessment tool which establishes acceptable low-level exposure values to be applied to chemicals with limited toxicological data. One of the logical next steps in the continued evolution of TTC is to develop this concept further so that it is representative of internal exposures (TTC based on plasma concentration). An internal TTC (iTTC) would provide threshold values that could be utilized in exposure-based safety assessments. As part of a Cosmetics Europe (CosEu) research program, CosEu has initiated a project that is working towards the development of iTTCs that can be used for the human safety assessment. Knowing that the development of an iTTC is an ambitious and broad-spanning topic, CosEu organized a Working Group comprised a balance of multiple stakeholders (cosmetics and chemical industries, the EPA and JRC and academia) with relevant experience and expertise and workshop to critically evaluate the requirements to establish an iTTC. Outcomes from the workshop included an evaluation on the current state of the science for iTTC, the overall iTTC strategy, selection of chemical databases, capture and curation of chemical information, ADME and repeat dose data, expected challenges, as well as next steps and ongoing work., (Copyright © 2019 The Authors. Published by Elsevier Inc. All rights reserved.)

When performing safety assessment of chemicals, the evaluation of their systemic toxicity based only on non-animal approaches is a challenging objective. The Safety Evaluation Ultimately Replacing Animal Test programme (SEURAT-1) addressed this question from 2011 to 2015 and showed that further research and development of adequate tools in toxicokinetic and toxicodynamic are required for performing non-animal safety assessments. It also showed how to implement tools like thresholds of toxicological concern (TTCs) and read-across in this context. This paper shows a tiered scientific workflow and how each tier addresses the four steps of the risk assessment paradigm. Cosmetics Europe established its Long Range Science Strategy (LRSS) programme, running from 2016 to 2020, based on the outcomes of SEURAT-1 to implement this workflow. Dedicated specific projects address each step of this workflow, which is introduced here. It tackles the question of evaluating the internal dose when systemic exposure happens. The applicability of the workflow will be shown through a series of case studies, which will be published separately. Even if the LRSS puts the emphasis on safety assessment of cosmetic relevant chemicals, it remains applicable to any type of chemical., (Copyright © 2018. Published by Elsevier Ltd.)

Genome-environment association methods aim to detect genetic markers associated with environmental variables. The detected associations are usually analysed separately to identify the genomic regions involved in local adaptation. However, a recent study suggests that single-locus associations can be combined and used in a predictive way to estimate environmental variables for new individuals on the basis of their genotypes. Here, we introduce an original approach to predict the environmental range (values and upper and lower limits) of species genotypes from the genetic markers significantly associated with those environmental variables in an independent set of individuals. We illustrate this approach to predict aridity in a database constituted of 950 individuals of wild beets and 299 individuals of cultivated beets genotyped at 14,409 random single nucleotide polymorphisms (SNPs). We detected 66 alleles associated with aridity and used them to calculate the fraction (I) of aridity-associated alleles in each individual. The fraction I correctly predicted the values of aridity in an independent validation set of wild individuals and was then used to predict aridity in the 299 cultivated individuals. Wild individuals had higher median values and a wider range of values of aridity than the cultivated individuals, suggesting that wild individuals have higher ability to resist to stress-aridity conditions and could be used to improve the resistance of cultivated varieties to aridity., (© 2018 John Wiley & Sons Ltd.)

Cosmetics Europe, the European Trade Association for the cosmetics and personal care industry, is conducting a multi-phase program to develop regulatory accepted, animal-free testing strategies enabling the cosmetics industry to conduct safety assessments. Based on a systematic evaluation of test methods for skin sensitization, five non-animal test methods (DPRA (Direct Peptide Reactivity Assay), KeratinoSens TM , h-CLAT (human cell line activation test), U-SENS TM , SENS-IS) were selected for inclusion in a comprehensive database of 128 substances. Existing data were compiled and completed with newly generated data, the latter amounting to one-third of all data. The database was complemented with human and local lymph node assay (LLNA) reference data, physicochemical properties and use categories, and thoroughly curated. Focused on the availability of human data, the substance selection resulted nevertheless resulted in a high diversity of chemistries in terms of physico-chemical property ranges and use categories. Predictivities of skin sensitization potential and potency, where applicable, were calculated for the LLNA as compared to human data and for the individual test methods compared to both human and LLNA reference data. In addition, various aspects of applicability of the test methods were analyzed. Due to its high level of curation, comprehensiveness, and completeness, we propose our database as a point of reference for the evaluation and development of testing strategies, as done for example in the associated work of Kleinstreuer et al. We encourage the community to use it to meet the challenge of conducting skin sensitization safety assessment without generating new animal data.

Skin sensitization is a toxicity endpoint of widespread concern, for which the mechanistic understanding and concurrent necessity for non-animal testing approaches have evolved to a critical juncture, with many available options for predicting sensitization without using animals. Cosmetics Europe and the National Toxicology Program Interagency Center for the Evaluation of Alternative Toxicological Methods collaborated to analyze the performance of multiple non-animal data integration approaches for the skin sensitization safety assessment of cosmetics ingredients. The Cosmetics Europe Skin Tolerance Task Force (STTF) collected and generated data on 128 substances in multiple in vitro and in chemico skin sensitization assays selected based on a systematic assessment by the STTF. These assays, together with certain in silico predictions, are key components of various non-animal testing strategies that have been submitted to the Organization for Economic Cooperation and Development as case studies for skin sensitization. Curated murine local lymph node assay (LLNA) and human skin sensitization data were used to evaluate the performance of six defined approaches, comprising eight non-animal testing strategies, for both hazard and potency characterization. Defined approaches examined included consensus methods, artificial neural networks, support vector machine models, Bayesian networks, and decision trees, most of which were reproduced using open source software tools. Multiple non-animal testing strategies incorporating in vitro, in chemico, and in silico inputs demonstrated equivalent or superior performance to the LLNA when compared to both animal and human data for skin sensitization.

Significant progress has been made in the development and validation of non-animal test methods for skin sensitization assessment. At present, three of the four key events of the Adverse Outcome Pathway (AOP) are assessable by OECD-accepted in vitro methods. The fourth key event describes the immunological response in the draining lymph node where activated dendritic cells present major histocompatibility complex-bound chemically modified peptides to naive T cells, thereby priming the proliferation of antigen-specific T cells. Despite substantial efforts, modelling and assessing this adaptive immune response to sensitizers with in vitro T cell assays still represents a challenge. The Cosmetics Europe Skin Tolerance Task Force organized a workshop, bringing together academic researchers, method developers, industry representatives and regulatory stakeholders to review the scientific status of T cell-based assays, foster a mutual scientific understanding and conceive new options to assess T cell activation. Participants agreed that current T cell assays have come a long way in predicting immunogenicity, but that further investment and collaboration is required to simplify assays, optimize their sensitivity, better define human donor-to-donor variability and evaluate their value to predict sensitizer potency. Furthermore, the potential role of T cell assays in AOP-based testing strategies and subsequent safety assessment concepts for cosmetic ingredients was discussed. It was agreed that it is currently difficult to anticipate uses of T cell assay data for safety assessment and concluded that experience from case studies on real-life risk assessment scenarios is needed to further consider the usefulness of assessing the fourth AOP key event.

Key Message: Using a much higher number of SNP markers and larger sample sizes than all the previous studies, we characterized the genetic relationships among wild and cultivated plants of section Beta. We analyzed the genetic variation of Beta section Beta, which includes wild taxa (Beta macrocarpa, B. patula, B. vulgaris subsp. adanensis and B. vulgaris subsp. maritima) and cultivars (fodder beet, sugar beet, garden beet, leaf beet, and swiss chards), using 9724 single nucleotide polymorphism markers. The analyses conducted at the individual level without a priori groups confirmed the strong differentiation of B. macrocarpa and B. vulgaris subsp. adanensis from the other taxa. B. vulgaris subsp. maritima showed a complex genetic structure partly following a geographical pattern, which confounded the differences between this taxon and the cultivated varieties. Cultivated varieties were structured into three main groups: garden beets, fodder and sugar beets, and leaf beets and swiss chards. The genetic structure described here will be helpful to correctly estimate linkage disequilibrium and to test for statistical associations between genetic markers and environmental variables.

Key Message: The genetic variation of Beta section Beta is structured into four taxonomic and spatial clusters. There are significant associations between molecular markers and environmental variables., Abstract: We investigated the genetic diversity of Beta section Beta, which includes the wild and cultivated relatives of the sugar beet. The taxa included in the study were: Beta vulgaris subsp. maritima, B. vulgaris subsp. adanensis, B. macrocarpa, B. patula and B. vulgaris subsp. vulgaris (garden beet, leaf beet and swiss chards). We collected 1264 accessions originating from the entire distribution area of these taxa and genotyped them for 4436 DArT markers (DArTs). We showed that the genetic variation of these accessions is structured into four taxonomic and spatial clusters: (1) samples of Beta macrocarpa, (2) samples of Beta vulgaris subsp. adanensis, (3) Mediterranean and Asian samples and (4) Atlantic and Northern European samples. These last two clusters were mainly composed of samples of Beta vulgaris subsp. maritima. We investigated in deeper detail the genetic structure of B. vulgaris subsp. maritima, which constituted the majority (80%) of the wild samples. This subspecies exhibited a clinal genetic variation from South-East to North-West. We detected some markers significantly associated to environmental variables in B. vulgaris subsp. maritima. These associations are interpreted as results of natural selection. The variable most often involved in the associations was annual mean temperature. Therefore, these markers can be useful for the development of frost-tolerant winter beets and drought-tolerant rain-fed beets.

This chapter focuses on practical aspects of conducting prospective in vitro validation studies, and in particular, by laboratories that are members of the European Union Network of Laboratories for the Validation of Alternative Methods (EU-NETVAL) that is coordinated by the EU Reference Laboratory for Alternatives to Animal Testing (EURL ECVAM). Prospective validation studies involving EU-NETVAL, comprising a multi-study trial involving several laboratories or "test facilities", typically consist of two main steps: (1) the design of the validation study by EURL ECVAM and (2) the execution of the multi-study trial by a number of qualified laboratories within EU-NETVAL, coordinated and supported by EURL ECVAM. The approach adopted in the conduct of these validation studies adheres to the principles described in the OECD Guidance Document on the Validation and International Acceptance of new or updated test methods for Hazard Assessment No. 34 (OECD 2005). The context and scope of conducting prospective in vitro validation studies is dealt with in Chap. 4 . Here we focus mainly on the processes followed to carry out a prospective validation of in vitro methods involving different laboratories with the ultimate aim of generating a dataset that can support a decision in relation to the possible development of an international test guideline (e.g. by the OECD) or the establishment of performance standards.

The development and validation of scientific alternatives to animal testing is important not only from an ethical perspective (implementation of 3Rs), but also to improve safety assessment decision making with the use of mechanistic information of higher relevance to humans. To be effective in these efforts, it is however imperative that validation centres, industry, regulatory bodies, academia and other interested parties ensure a strong international cooperation, cross-sector collaboration and intense communication in the design, execution, and peer review of validation studies. Such an approach is critical to achieve harmonized and more transparent approaches to method validation, peer-review and recommendation, which will ultimately expedite the international acceptance of valid alternative methods or strategies by regulatory authorities and their implementation and use by stakeholders. It also allows achieving greater efficiency and effectiveness by avoiding duplication of effort and leveraging limited resources. In view of achieving these goals, the International Cooperation on Alternative Test Methods (ICATM) was established in 2009 by validation centres from Europe, USA, Canada and Japan. ICATM was later joined by Korea in 2011 and currently also counts with Brazil and China as observers. This chapter describes the existing differences across world regions and major efforts carried out for achieving consistent international cooperation and harmonization in the validation and adoption of alternative approaches to animal testing.

This chapter explores the concepts, processes, tools and challenges relating to the validation of alternative methods for toxicity and safety testing. In general terms, validation is the process of assessing the appropriateness and usefulness of a tool for its intended purpose. Validation is routinely used in various contexts in science, technology, the manufacturing and services sectors. It serves to assess the fitness-for-purpose of devices, systems, software up to entire methodologies. In the area of toxicity testing, validation plays an indispensable role: "alternative approaches" are increasingly replacing animal models as predictive tools and it needs to be demonstrated that these novel methods are fit for purpose. Alternative approaches include in vitro test methods, non-testing approaches such as predictive computer models up to entire testing and assessment strategies composed of method suites, data sources and decision-aiding tools. Data generated with alternative approaches are ultimately used for decision-making on public health and the protection of the environment. It is therefore essential that the underlying methods and methodologies are thoroughly characterised, assessed and transparently documented through validation studies involving impartial actors. Importantly, validation serves as a filter to ensure that only test methods able to produce data that help to address legislative requirements (e.g. EU's REACH legislation) are accepted as official testing tools and, owing to the globalisation of markets, recognised on international level (e.g. through inclusion in OECD test guidelines). Since validation creates a credible and transparent evidence base on test methods, it provides a quality stamp, supporting companies developing and marketing alternative methods and creating considerable business opportunities. Validation of alternative methods is conducted through scientific studies assessing two key hypotheses, reliability and relevance of the test method for a given purpose. Relevance encapsulates the scientific basis of the test method, its capacity to predict adverse effects in the "target system" (i.e. human health or the environment) as well as its applicability for the intended purpose. In this chapter we focus on the validation of non-animal in vitro alternative testing methods and review the concepts, challenges, processes and tools fundamental to the validation of in vitro methods intended for hazard testing of chemicals. We explore major challenges and peculiarities of validation in this area. Based on the notion that validation per se is a scientific endeavour that needs to adhere to key scientific principles, namely objectivity and appropriate choice of methodology, we examine basic aspects of study design and management, and provide illustrations of statistical approaches to describe predictive performance of validated test methods as well as their reliability.

During the heat treatment of coffee and its substitutes some compounds potentially deleterious to health are synthesized by the Maillard reaction. Among these, N(ε)-carboxymethyl-lysine (CML) was detected at high levels in coffee substitutes. The objective of this study was to evaluate the impact of changes in agricultural practice on the lysine content present in chicory roots and try to limit CML formation during roasting. Of the 24 varieties analyzed, small variations in lysine content were observed, 213 ± 8 mg/100 g dry matter (DM). The formation of lysine tested in five commercial varieties was affected by the nitrogen treatment with mean levels of 176 ± 2 mg/100 g DM when no fertilizer was added and 217 ± 7 mg/100 g DM with a nitrogen supply of 120 kg/ha. The lysine content of fresh roots was significantly correlated to the concentration of CML formed in roasted roots (r = 0.51; p < 0.0001; n = 76).

Alternative test methods often use prediction models (PMs) for converting endpoint measurements into predictions. Two PMs are used for the skin corrosion tests (SCTs) of the OECD Test Guideline No. 431 (TG 431). One is specific to EpiSkin™ test method, whereas EpiDerm™, SkinEthic™ RHE and epiCS® share a common PM. These methods are based on reconstructed human epidermis models wherein cell viability values are measured. Their PMs allow translating those values into sub-categories of corrosive chemicals, Category 1A (Cat1A) and a combination of Categories 1B/1C (Cat1BC), and identifying non-corrosive (NC) chemicals. EpiSkin™'s PM already results in sufficiently accurate predictions. The common PM of the three others accurately identifies all corrosive chemicals but, for sub-categorization, an important fraction of Cat1BC chemicals (40-50%) is over-predicted as Cat1A. This paper presents a post-hoc analysis of validation data on a set of n=80 chemicals. It investigates: why this common PM causes these over-predictions and how two novel PMs that we developed (PMvar1 and PMvar2) improve the predictive capacity of these methods. PMvar1 is based on a two-step approach; PMvar2 is based on a single composite indicator of cell viability. Both showed a greater capacity to predict Cat1BC, while Cat1A correct predictions remaining at least at the same level of EpiSkin™. We suggest revising TG 431, to include the novel PMs in view of improving the predictive capacity of its SCTs., (Copyright © 2015. Published by Elsevier Ltd.)

Increasing pea (Pisum sativum) seed nutritional value and particularly seed protein content, while maintaining yield, is an important challenge for further development of this crop. Seed protein content and yield are complex and unstable traits, integrating all the processes occurring during the plant life cycle. During filling, seeds are the main sink to which assimilates are preferentially allocated at the expense of vegetative organs. Nitrogen seed demand is satisfied partly by nitrogen acquired by the roots, but also by nitrogen remobilized from vegetative organs. In this study, we evaluated the respective roles of nitrogen source capacity and sink strength in the genetic variability of seed protein content and yield. We showed in eight genotypes of diverse origins that both the maximal rate of nitrogen accumulation in the seeds and nitrogen source capacity varied among genotypes. Then, to identify the genetic factors responsible for seed protein content and yield variation, we searched for quantitative trait loci (QTL) for seed traits and for indicators of sink strength and source nitrogen capacity. We detected 261 QTL across five environments for all traits measured. Most QTL for seed and plant traits mapped in clusters, raising the possibility of common underlying processes and candidate genes. In most environments, the genes Le and Afila, which control internode length and the switch between leaflets and tendrils, respectively, determined plant nitrogen status. Depending on the environment, these genes were linked to QTL of seed protein content and yield, suggesting that source-sink adjustments depend on growing conditions.

Introduction: Thrombosis of the ovarian vein (TOV) is a rare complication which arises classically in the post-partum. Its main signs are pain in the flanks or the iliac fossa, associated with temperature and hyperleukocytosis. It is a differential diagnosis of acute appendicitis when located on the right side., Observation: A 26 year-old, primiparous woman consulted at 38 weeks of amenorrhoea for pain in the right iliac fossa and flank with a temperature of 38.6 degrees C. Three days after delivery, because of heavier pain, a coelioscopy was decided on that led to the diagnosis of thrombosis of the right ovarian vein., Comments: Improvement in the diagnosis techniques, notably Doppler ultrasonography and spiral CT should avoid the diagnosis of TOV during surgery. Traditionally a post-partum complication, TOV can occur before delivery, period during which it is very important not to misjudge this diagnosis, notably in case of thrombosis spreading to the inferior vena cava with free-floating thrombus. The treatment of TOV is essentially medical. In the case of extension to the vena cava, the installation of a vena cava filter or a surgical cava thrombectomy may be necessary.

The possibility of obtaining haploid plants of chicory (Cichorium intybus L.) was investigated through intergeneric hybridization. Chicory plants (industrial chicory and Chioggia) were pollinated with pollen of Lactuca tatarica L. and Cicerbita alpina Walbr. Many achenes contained embryos which were rescued in vitro. Only a few embryos developed into plants which were then acclimatized in soil. Among them, three expressed a chicory phenorype and were haploid.

Mature pollen protoplasts (n) isolated from kanamycin resistant plants of Nicotiana tabacum (2n = 4x = 48) were fused with somatic mesophyll protoplasts (2n) of Nicotiana plumbaginifolia (2n = 20) to produce plants. A total of 3.6·10(6) mature pollen protoplasts were fused with 7·10(6) mesophyll protoplasts using a PEG/Ca(2+) method. Mature pollen protoplasts did not divide in our culture conditions, and N. plumbaginifolia protoplasts stopped dividing when the protoplast-derived colonies were transferred to a selection medium containing paromomycine (20 mg·l(-1)). A total of 133 actively growing colonies were recovered on the selection medium containing kanamycin (100 mg·l(-1)). Plants from twenty resulting cell lines were confirmed as hybrids (17) or cybrids (3) based on leaf and floral morphology and fertility analysis. Isozyme pattern analysis confirmed the nuclear hybrid and cybrid nature, respectively, for 2 and 3 typical gametosomatic selected plants. Root tip squashes of 6 of the gametosomatic hybrid plants revealed chromosome numbers ranging from 44 to 68; the 3 selected cybrid plants had 48 chromosomes. Evidence for organelle transmission from the mesophyll partner in the gametosomatic plants is shown. From the analysis it can be concluded that the gametosomatic fusion involving mature pollen protoplasts (n) carrying a dominant selection marker can be convenient for synthesis of either hybrids or cybrids. Such gametosomatic fusion is therefore considered as a new approach towards the production of androgenetic plants with a choosen cytoplasm.