Search

The optimal release profile of locally delivered bone morphogenetic protein-2 (BMP-2) for safe and effective clinical application is unknown. In this work, the effect of differential BMP-2 release on bone formation was investigated using a novel biomaterial oligo[(polyethylene glycol) fumarate] bis[2-(methacryloyloxy) ethyl] phosphate hydrogel (OPF-BP) containing poly(lactic-co-glycolic acid) microspheres. Three composite implants with the same biomaterial chemistry and structure but different BMP-loading methods were created: BMP-2 encapsulated in microspheres (OPF-BP-Msp), BMP-2 encapsulated in microspheres and adsorbed on the phosphorylated hydrogel (OPF-BP-Cmb), and BMP-2 adsorbed on the phosphorylated hydrogel (OPF-BP-Ads). These composites were compared with the clinically used BMP-2 carrier, Infuse® absorbable collagen sponge (ACS). Differential release profiles of bioactive BMP-2 were achieved by these composites. In a rat subcutaneous implantation model, OPF-BP-Ads and ACS generated a large BMP-2 burst release (>75%), whereas a more sustained release was seen for OPF-BP-Msp and OPF-BP-Cmb (~25% and 50% burst, respectively). OPF-BP-Ads generated significantly more bone than did all other composites, and the bone formation was 12-fold higher than that of the clinically used ACS. Overall, this study clearly shows that BMP-2 burst release generates more subcutaneous bone than do sustained release in OPF-BP-microsphere composites. Furthermore, composites should not only function as a delivery vehicle but also provide a proper framework to achieve appropriate bone formation.

Hydrogel-based 3D cell cultures are an emerging strategy for the regeneration of cartilage. In an attempt to regenerate dysfunctional intervertebral discs, nucleus pulposus (NP) cells can be cultured in hydrogels of various kinds and physical properties. Stiffness sensing through focal adhesions is believed to direct chondrogenesis, but the mechanisms by which this works are largely unknown. In this study we compared focal adhesion formation and glycosaminoglycan (GAG) deposition by NP cells in a range of hydrogels. Using a focal adhesion kinase (FAK) inhibitor, we demonstrated that focal adhesion signaling is involved in the response of NP cells in hydrogels that contain integrin binding sites (i.e. methacrylated gelatin (gelMA) and type II collagen), but not in hydrogels deplete from integrin binding sites such as alginate and agarose, or CD44-binding hydrogels based on hyaluronic acid. As a result of FAK inhibition we observed enhanced proteoglycan production in gelMA, but decreased production in type II collagen hydrogels, which could be explained by alteration in cell fate as supported by the increase in the adipogenic marker peroxisome proliferator-activated receptor gamma (PPARy). Furthermore, GAG deposition was inversely proportional to polymer concentration in integrin-binding gelMA, while no direct relationship was found for the non-integrin binding gels alginate and agarose. This corroborates our finding that focal adhesion formation plays an important role in NP cell response to its surrounding matrix. Statement of Significance Biomaterials are increasingly being investigated for regenerative medicine applications, including regeneration of the nucleus pulposus. Cells interact with their environment and are influenced by extracellular matrix or polymer properties. Insight in these interactions can improve regeneration and helps to understand degeneration processes. The role of focal adhesion formation in the regenerative response of nucleus pulposus cells is largely unknown. Therefore, the relation between materials, stiffness and focal adhesion formation is studied here.

Background Biodegradable PCL- b-PTMC- b-PCL triblock copolymers based on trimethylene carbonate (TMC) and ε-caprolactone (CL) were prepared and used in the 3D printing of tissue engineering scaffolds. Triblock copolymers of various molecular weights containing equal amounts of TMC and CL were prepared. These block copolymers combine the low glass transition temperature of amorphous PTMC (approximately -20°C) and the semi-crystallinity of PCL (glass transition approximately -60°C and melting temperature approximately 60°C). Methods PCL- b-PTMC- b-PCL triblock copolymers were synthesized by sequential ring opening polymerization (ROP) of TMC and ε-CL. From these materials, films were prepared by solvent casting and porous structures were prepared by extrusion-based 3D printing. Results Films prepared from a polymer with a relatively high molecular weight of 62 kg/mol had a melting temperature of 58°C and showed tough and resilient behavior, with values of the elastic modulus, tensile strength and elongation at break of approximately 120 MPa, 16 MPa and 620%, respectively. Porous structures were prepared by 3D printing. Ethylene carbonate was used as a crystalizable and water-extractable solvent to prepare structures with microporous strands. Solutions, containing 25 wt% of the triblock copolymer, were extruded at 50°C then cooled at different temperatures. Slow cooling at room temperature resulted in pores with widths of 18 ± 6 μm and lengths of 221 ± 77 μm, rapid cooling with dry ice resulted in pores with widths of 13 ± 3 μm and lengths of 58 ± 12 μm. These PCL- b-PTMC- b-PCL triblock copolymers processed into porous structures at relatively low temperatures may find wide application as designed degradable tissue engineering scaffolds. Conclusions In this preliminary study we prepared biodegradable triblock copolymers based on 1,3-trimethylene carbonate and ε-caprolactone and assessed their physical characteristics. Furthermore, we evaluated their potential as melt-processable thermoplastic elastomeric biomaterials in 3D printing of tissue engineering scaffolds.

Bioprinting is a promising tool to fabricate organized cartilage. This study aimed to investigate the printability of gelatin-methacryloyl/gellan gum (gelMA/gellan) hydrogels with and without methacrylated hyaluronic acid (HAMA), and to explore (zone-specific) chondrogenesis of chondrocytes, articular cartilage progenitor cells (ACPCs), and multipotent mesenchymal stromal cells (MSCs) embedded in these bio-inks. The incorporating of HAMA in gelMA/gellan bio-ink increased filament stability, as measured using a filament collapse assay, but did not influence (zone-specific) chondrogenesis of any of the cell types. Highest chondrogenic potential was observed for MSCs, followed by ACPCs, which displayed relatively high proteoglycan IV mRNA levels. Therefore, two-zone constructs were printed with gelMA/gellan/HAMA containing ACPCs in the superficial region and MSCs in the middle/deep region. Chondrogenic differentiation was confirmed, however, printing influence cellular differentiation. ACPC- and MSC-laden gelMA/gellan/HAMA hydrogels are of interest for the fabrication of cartilage constructs. Nevertheless, this study underscores the need for careful evaluation of the effects of printing on cellular differentiation.

Hydrogels based on triblock copolymers of polyethylene glycol and partially methacrylated poly[N-(2-hydroxypropyl) methacrylamide mono/dilactate] make up an attractive class of biomaterials because of their biodegradability, cytocompatibility, and tunable thermoresponsive and mechanical properties. If these properties are fine-tuned, the hydrogels can be three-dimensionally bioprinted, to generate, for instance, constructs for cartilage repair. This study investigated whether hydrogels based on the polymer mentioned above with a 10% degree of methacrylation (M10P10) support cartilage formation by chondrocytes and whether the incorporation of methacrylated chondroitin sulfate (CSMA) or methacrylated hyaluronic acid (HAMA) can improve the mechanical properties, long-term stability, and printability. Chondrocyte-laden M10P10 hydrogels were cultured for 42 days to evaluate chondrogenesis. M10P10 hydrogels with or without polysaccharides were evaluated for their mechanical properties (before and after UV photo-cross-linking), degradation kinetics, and printability. Extensive cartilage matrix production occurred in M10P10 hydrogels, highlighting their potential for cartilage repair strategies. The incorporation of polysaccharides increased the storage modulus of polymer mixtures and decreased the degradation kinetics in cross-linked hydrogels. Addition of HAMA to M10P10 hydrogels improved printability and resulted in three-dimensional constructs with excellent cell viability. Hence, this novel combination of M10P10 with HAMA forms an interesting class of hydrogels for cartilage bioprinting.

The local immune response is important to consider when the aim is to improve bone regeneration. Recently T lymphocytes and their associated cytokines have been identified as regulators in fracture callus formation, but it is not known whether T cells affect bone progenitor cells directly. The goal of this in vitro study was to investigate the role of different T cell subsets and their secreted factors on the osteogenic differentiation of human mesenchymal stem cells (MSCs). Significant increases in the alkaline phosphatase activity and the subsequent matrix mineralization by MSCs were found after their exposure to activated T cells or activated T cell-derived conditioned medium. Blocking IFN-γ in the conditioned medium abolished its pro-osteogenic effect, while blocking TGF-β further enhanced osteogenesis. The relative contribution of an anti- or proinflammatory T cell phenotype in MSC osteogenic differentiation was studied next. Enrichment of the fraction of anti-inflammatory regulatory T cells had no beneficial osteogenic effect. In contrast, soluble factors derived from enriched T helper 17 cells upregulated the expression of osteogenic markers by MSCs. IL-17A, and IL-17F, their main proinflammatory cytokines, similarly exhibited strong osteogenic effects when exposed directly to MSCs. IL-17A in particular showed a synergistic action together with bone morphogenetic protein 2. These results indicate that individual T cell subsets, following their activation, affect osteoblast maturation in a different manner through the production of soluble factors. From all T cells, the proinflammatory T cells, including the T helper 17 cells, are most stimulatory for osteogenesis.

Background and purpose - Aseptic loosening and infection are 2 of the most common causes of revision of hip implants. Antibiotic prophylaxis reduces not only the rate of revision due to infection but also the rate of revision due to aseptic loosening. This suggests under-diagnosis of infections in patients with presumed aseptic loosening and indicates that current diagnostic tools are suboptimal. In a previous multicenter study on 176 patients undergoing revision of a total hip arthroplasty due to presumed aseptic loosening, optimized diagnostics revealed that 4-13% of the patients had a low-grade infection. These infections were not treated as such, and in the current follow-up study the effect on mid- to long-term implant survival was investigated. Patients and methods - Patients were sent a 2-part questionnaire. Part A requested information about possible re-revisions of their total hip arthroplasty. Part B consisted of 3 patient-related outcome measure questionnaires (EQ5D, Oxford hip score, and visual analog scale for pain). Additional information was retrieved from the medical records. The group of patients found to have a low-grade infection was compared to those with aseptic loosening. Results - 173 of 176 patients from the original study were included. In the follow-up time between the revision surgery and the current study (mean 7.5 years), 31 patients had died. No statistically significant difference in the number of re-revisions was found between the infection group (2 out of 21) and the aseptic loosening group (13 out of 152); nor was there any significant difference in the time to re-revision. Quality of life, function, and pain were similar between the groups, but only 99 (57%) of the patients returned part B. Interpretation - Under-diagnosis of low-grade infection in conjunction with presumed aseptic revision of total hip arthroplasty may not affect implant survival.

Bone defect healing is highly dependent on the simultaneous stimulation of osteogenesis and vascularization. In bone regenerative strategies, combined seeding of multipotent stromal cells (MSCs) and endothelial progenitor cells (EPCs) proves their mutual stimulatory effects. Here, we investigated whether stromal-cell-derived factor-1α (SDF-1α) stimulates vascularization by EPCs and whether SDF-1α could replace seeded cells in ectopic bone formation. Late EPCs of goat origin were characterized for their endothelial phenotype and showed to be responsive to SDF-1α in in vitro migration assays. Subsequently, subcutaneous implantation of Matrigel plugs that contained both EPCs and SDF-1α showed more tubule formation than constructs containing either EPCs or SDF-1α. Addition of either EPCs or SDF-1α to MSC-based constructs showed even more elaborate vascular networks after 1 week in vivo, with SDF-1α/MSC-laden groups showing more prominent interconnected networks than EPC/MSC-laden groups. The presence of abundant mouse-specific CD31/PECAM expression in these constructs confirmed ingrowth of murine vessels and discriminated between angiogenesis and vessel networks formed by seeded goat cells. Importantly, implantation of EPC/MSC or SDF-1α/MSC constructs resulted in indistinguishable ectopic bone formation. In both groups, bone onset was apparent at week 3 of implantation. Taken together, we demonstrated that SDF-1α stimulated the migration of EPCs in vitro and vascularization in vivo. Further, SDF-1α addition was as effective as EPCs in inducing the formation of vascularized ectopic bone based on MSC-seeded constructs, suggesting a cell-replacement role for SDF-1α. These results hold promise for the design of larger centimeter-scale, cell-free vascular bone grafts.

Background context Regenerative medicine (RM) interventions, such as (stem) cell transplantation, scaffolds, gene transfer, and tissue engineering, are likely to change the field of orthopedics considerably. These strategies will significantly differ from treatments in current orthopedic practice, as they treat the underlying cause of disease and intervene at a biological level, preferably in an earlier stage. Whereas most of the RM interventions for orthopedics are still in the preclinical phase of research, the number of clinical studies is expected to increase rapidly in the future. The debate about the challenging scientific and ethical issues of translating these innovative interventions into (early) clinical studies is developing. However, no empirical studies that have systematically described the attitudes, opinions, and experiences of experts in the field of orthopedic RM concerning these challenges exist. Purpose The aim of this study was to identify ethical issues that experts in the area of RM for musculoskeletal disorders consider to be relevant to address so as to properly translate RM interventions into (early) clinical studies. Study design/setting In-depth qualitative interviews were conducted with 36 experts in the field, mainly spine surgeons and musculoskeletal scientists from The Netherlands and the United Kingdom. Methods A topic list of open questions, based on existing literature and pilot interviews, was used to guide the interviews. Data analysis was based on the constant comparative method, which means going back and forth from the data to develop codes, concepts, and themes. Results Four ethical themes emerged from the interview data. First, the risks to study participants. Second, the appropriate selection of study participants. Third, setting relevant goal(s) for measuring outcome, varying from regenerating tissue to improving well-being of patients. Finally, the need for evidence-based medicine and scientific integrity, which is considered challenging in orthopedics. Discussion The overall attitude toward the development of RM was positive, especially because current surgical treatments for spine disorders lack satisfactory effectiveness. However, efforts should be taken to adequately address the ethical and scientific issues in the translation of RM interventions into clinical research. This is required to prevent unnecessary risks to study participants, to prevent exposure of future patients to useless clinical applications, as well as to prevent this young field from developing a negative reputation. Not only will the orthopedic RM field benefit from ethically and scientifically sound clinical studies, but the rise of RM also provides an opportunity to stimulate evidence-based practice in orthopedics and address hype- and profit-driven practices in orthopedics.

Hydrogels can provide a suitable environment for tissue formation by embedded cells, which makes them suitable for applications in regenerative medicine. However, hydrogels possess only limited mechanical strength, and must therefore be reinforced for applications in load-bearing conditions. In most approaches the reinforcing component and the hydrogel network have poor interactions and the synergetic effect of both materials on the mechanical properties is not effective. Therefore, in the present study, a thermoplastic polymer blend of poly(hydroxymethylglycolide-co-ε-caprolactone)/ poly(ε-caprolactone) (pHMGCL/PCL) was functionalized with methacrylate groups (pMHMGCL/PCL) and covalently grafted to gelatin methacrylamide (gelMA) hydrogel through photopolymerization. The grafting resulted in an at least fivefold increase in interface-binding strength between the hydrogel and the thermoplastic polymer material. GelMA constructs were reinforced with three-dimensionally printed pHMGCL/PCL and pMHMGCL/PCL scaffolds and tested in a model for a focal articular cartilage defect. In this model, covalent bonds at the interface of the two materials resulted in constructs with an improved resistance to repeated axial and rotational forces. Moreover, chondrocytes embedded within the constructs were able to form cartilage-specific matrix both in vitro and in vivo. Thus, by grafting the interface of different materials, stronger hybrid cartilage constructs can be engineered. © 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Articular cartilage has limited regenerative capabilities. Chondrocytes from different layers of cartilage have specific properties, and regenerative approaches using zonal chondrocytes may yield better replication of the architecture of native cartilage than when using a single cell population. To obtain high seeding efficiency while still mimicking zonal architecture, cell pellets of expanded deep zone and superficial zone equine chondrocytes were seeded and cultured in two layers on poly(ethylene glycol)-terephthalate-poly(butylene terephthalate) (PEGT-PBT) scaffolds. Scaffolds seeded with cell pellets consisting of a 1:1 mixture of both cell sources served as controls. Parallel to this, pellets of superficial or deep zone chondrocytes, and combinations of the two cell populations, were cultured without the scaffold. Pellet cultures of zonal chondrocytes in scaffolds resulted in a high seeding efficiency and abundant cartilaginous tissue formation, containing collagen type II and glycosaminoglycans (GAGs) in all groups, irrespective of the donor (n = 3), zonal population or stratified scaffold-seeding approach used. However, whereas total GAG production was similar, the constructs retained significantly more GAG compared to pellet cultures, in which a high percentage of the produced GAGs were secreted into the culture medium. Immunohistochemistry for zonal markers did not show any differences between the conditions. We conclude that spatially defined pellet culture in 3D scaffolds is associated with high seeding efficiency and supports cartilaginous tissue formation, but did not result in the maintenance or restoration of the original zonal phenotype. The use of pellet-assembled constructs leads to a better retainment of newly produced GAGs than the use of pellet cultures alone.

Background: Spinal fusion with the use of autograft is a commonly performed procedure. However, harvesting of bone from the iliac crest is associated with complications. Bone morphogenetic proteins (BMPs) are extensively used as alternatives, often without sufficient evidence of safety and efficacy. The purpose of this study was to investigate non-inferiority of osteogenic protein-1 (OP-1, also known as BMP-7) in comparison with iliac crest bone graft in posterolateral fusions. Methods: This study was a randomized, controlled multicenter trial. Patients who underwent a single-level instrumented posterolateral fusion of the lumbar spine for degenerative or isthmic spondylolisthesis with symptoms of neurological compression were randomized to receive OP-1 combined with local bone (OP-1 group) or autologous bone graft from the iliac crest combined with local bone (autograft group). The primary outcome was overall success, defined as a combination of clinical success and evidence of fusion on computed tomography (CT) scans, at one year postoperatively. Results: One hundred and nineteen patients were included in the study, and analysis of the overall outcome was performed for 113. Non-inferiority of OP-1 compared with iliac crest autograft was not found at one year, with a success rate of 40% in the OP-1 group versus 54% in the autograft group (risk difference = −13.3%, 90% confidence interval [CI] = −28.6% to +2.10%). This was due to the lower rate of fusion (the primary aim of OP-1 application) seen on the CT scans in the OP-1 group (54% versus 74% in the autograft group, p = 0.03). There were no adverse events that could be directly related to the use of OP-1. Conclusions: OP-1 with a collagen carrier was not as effective as autologous iliac crest bone for achieving fusion and cannot be recommended in instrumented posterolateral lumbar fusion procedures. Level of Evidence: Therapeutic Level I. See Instructions for Authors for a complete description of levels of evidence.