Search

The reconfigurable intelligent surface is an emerging technology for wireless communications. We model it as an inhomogeneous boundary of surface impedance, and consider various optimization problems that offer different tradeoffs in terms of performance and implementation complexity. The considered non-convex optimization problems are reformulated as a sequence of approximating linear quadratically constrained or semidefinite programs, which are proved to have a polynomial complexity and to converge monotonically in the objective value., Comment: Submitted for IEEE publication

Appropriate channel models tailored to the specific needs of industrial environments are crucial for the 5G private industrial network design and guiding deployment strategies. This paper scrutinizes the applicability of 3GPP's channel model for industrial scenarios. The challenges in accurately modeling industrial channels are addressed, and a refinement strategy is proposed employing a ray-tracing (RT) based channel model calibrated with continuous-wave received power measurements collected in a manufacturing facility in Sweden. The calibration helps the RT model achieve a root mean square error (RMSE) and standard deviation of less than 7 dB. The 3GPP and the calibrated RT model are statistically compared with the measurements, and the coverage maps of both models are also analyzed. The calibrated RT model is used to simulate the network deployment in the factory to satisfy the reference signal received power (RSRP) requirement. The deployment performance is compared with the prediction from the 3GPP model in terms of the RSRP coverage map and coverage rate. Evaluation of deployment performance provides crucial insights into the efficacy of various channel modeling techniques for optimizing 5G industrial network planning., Comment: copyright 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works

Reconfigurable Intelligent Surfaces (RISs) have risen to the forefront of wireless communications research due to their proactive ability to alter the wireless environment intelligently, promising improved wireless network capacity and coverage. Thus, RISs are a pivotal technology in evolving next-generation communication networks. This paper demonstrates a system-level modeling approach for RIS. The RIS model, integrated with the Volcano ray-tracing (RT) tool, is used to analyze the far-field (FF) RIS channel properties in a typical factory environment and explore coverage enhancement at sub-6 GHz and mmWave frequencies. The results obtained in non-line-of-sight (NLoS) scenarios confirm that RIS application is relevant for 5G industrial networks., Comment: copyright 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works

We consider a reconfigurable intelligent surface (RIS) assisted multiple-input multiple-output (MIMO) system in the presence of scattering objects. The MIMO transmitter and receiver, the RIS, and the scattering objects are modeled as mutually coupled thin wires connected to load impedances. We introduce a novel numerical algorithm for optimizing the tunable loads connected to the RIS, which does not utilize the Neumann series approximation. The algorithm is provably convergent, has polynomial complexity with the number of RIS elements, and outperforms the most relevant benchmark algorithms while requiring fewer iterations and converging in a shorter time.

Industrial environments are considered to be severe from the point of view of electromagnetic (EM) wave propagation. When dealing with a wide range of industrial environments and deployment setups, ray-tracing channel emulation can capture many distinctive characteristics of a propagation scenario. Ray-tracing tools often require a detailed and accurate description of the propagation scenario. Consequently, industrial environments composed of complex objects can limit the effectiveness of a ray-tracing tool and lead to computationally intensive simulations. This study analyzes the impact of using different propagation models by evaluating the number of allowed ray path interactions and digital scenario representation for an industrial environment. This study is realized using the Volcano ray-tracing tool at frequencies relevant to 5G industrial networks: 2 GHz (mid-band) and 28 GHz (high-band). This analysis can help in enhancing a ray-tracing tool that relies on a digital representation of the propagation environment to produce deterministic channel models for Indoor Factory (InF) scenarios, which can subsequently be used for industrial network design., Comment: copyright 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works

In this paper, we introduce the new concept of Crowd-Detectable Zero-Energy-Devices. Such devices harvest solar or ambient light energy to power themselves, backscatter ambient waves to communicate, and are detected simultaneously by a smartphone connected to the network, and the network itself, as long as the device is close to the considered smartphone. Such device is a promising sustainable solution for the future of the Internet of Things. We describe an example of use case: asset tracking with zero added energy, zero new signals and zero new infrastructure in the network, thanks to the anonymous and transparent participation of smartphones connected to the wireless network. We then present our first prototypes of such devices that backscatter TV, 4G and 5G signals, and show our first experiments in challenging conditions and environments., Comment: Draft version of accepted IEEE RFID-TA 2021 conference paper. For the final version, please, consult the version to appear in IEEE explore

Reconfigurable Intelligent Surfaces (RISs) have attracted major attention in the last few years, thanks to their useful characteristics. An RIS is a nearly passive thin surface that can dynamically change the reradiated field, and can therefore realize anomalous reflection, refraction, focalization, or other wave transformations for engineering the radio propagation environment or realizing novel surface-type antennas. Evaluating the performance and optimizing the deployment of RISs in wireless networks need physically consistent frameworks that account for the electromagnetic characteristics of dynamic metasurfaces. In this paper, we introduce a general macroscopic model for evaluating the scattering from an RIS. The proposed method decomposes the wave reradiated from an RIS into multiple scattering contributions and is aimed at being embedded into ray-based models. Since state-of-the-art ray-based models can already efficiently simulate specular wave reflection, diffraction, and diffuse scattering, but not anomalous reradiation, we enhance them with an approach based on Huygens' principle and propose two possible implementations for it. Multiple reradiation modes can be modeled through the proposed approach, using the power conservation principle. We validate the accuracy of the proposed model by benchmarking it against several case studies available in the literature, which are based on analytical models, full-wave simulations, and measurements.

Reconfigurable intelligent surfaces (RISs) have the potential of realizing the emerging concept of smart radio environments by leveraging the unique properties of meta-surfaces. In this article, we discuss the potential applications of RISs in wireless networks that operate at high-frequency bands, e.g., millimeter wave (30-100 GHz) and sub-millimeter wave (greater than 100 GHz) frequencies. When used in wireless networks, RISs may operate in a manner similar to relays. This paper elaborates on the key differences and similarities between RISs that are configured to operate as anomalous reflectors and relays. In particular, we illustrate numerical results that highlight the spectral efficiency gains of RISs when their size is sufficiently large as compared with the wavelength of the radio waves. In addition, we discuss key open issues that need to be addressed for unlocking the potential benefits of RISs., Comment: Submitted for journal publication (revised version)

In this report, we summarize the end-to-end signal-to-noise ratio and the rate of half-duplex, full-duplex, amplify-and-forward, and decode-and-forward relay-aided communications, and well as the signal-to-noise ratio and the rate of the emerging technology known as reconfigurable intelligent surfaces., Comment: unpublished report

An emerging and promising vision of wireless networks consists of coating the environmental objects with reconfigurable metasurfaces that are capable of modifying the radio waves impinging upon them according to the generalized law of reflection. By relying on tools from point processes, stochastic geometry, and random spatial processes, we model the environmental objects with a modified random line process of fixed length, and with random orientations and locations. Based on the proposed modeling approach, we develop the first analytical framework that provides one with the probability that a randomly distributed object that is coated with a reconfigurable metasurface acts as a reflector for a given pair of transmitter and receiver. In contrast to the conventional network setup where the environmental objects are not coated with reconfigurable metasurfaces, we prove that the probability that the typical random object acts as a reflector is independent of the length of the object itself. The proposed analytical approach is validated against Monte Carlo simulations, and numerical illustrations are given and discussed., Comment: Submitted for journal publication

In this paper, for the first time, we propose two new solutions to boost the data rate between small connected objects such as glasses and cams and the 5th generation (5G) mobile network, based on spatial modulation, single carrier waveform, compact reconfigurable antennas at the object side and massive multiple input multiple output (M-MIMO) at the network side. In the first new wireless communication system, a "transmitting object" uses transmit spatial modulation with a compact reconfigurable antenna and a constant envelop amplifier to transmit in high data rate with a low complexity and low power consumption. The space-time digital processing capability of the M-MIMO 5G base station is used to detect such signal. In the second new wireless communication system, a "receiving object" uses receive spatial modulation, a compact multiport antenna and a low complexity detection algorithm to receive in high data rate with a low complexity signal processing. The space-time beamforming capability of the M-MIMO 5G base stations is exploited to deliver a signal that is pre-equalized enough to be detected by the object. For the first time, we present experiments showing that M-MIMO allows for the re-introduction of single carrier modulation waveform. For the first time, we present performance results obtained with real existing compact antennas and compact reconfigurable antennas, showing that the two new communication systems outperform conventional modulation in terms of energy efficiency and complexity., Comment: Submitted for publication to IEEE journal

Future wireless networks are expected to adopt many different network technologies and architectures that promise to greatly enhance data rate and provide ubiquitous coverage for end users, all while enabling higher spectral efficiency. These benefits come with an increased risk of co-channel interference and possible correlation in the aggregated interference, which impacts the communication performance. This paper introduces a mathematical framework to quantify the spatial correlation of the interference in finite and clustered wireless networks with signals subject to Rayleigh fading. Expressions are derived for the correlation coefficient of the outage probability when the interferers are located according to some of the most common point processes used in the literature to model the spatial distribution of the devices: binomial point process (i.e., relay networks with fixed users), Poisson point process (i.e., heterogeneous cellular networks), and Thomas point process (i.e., device-to-device networks)., Comment: 7 pages, and 3 figures - in IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC) 2018

Combustion stabilization and enhancement of the flammability limits are mandatory objectives to improve nowadays combustion chambers. At this purpose, the use of an electric field in the flame region provides a solution which is, at the same time, easy to implement and effective to modify the flame structure. The present work describes an efficient flamelet progress-variable approach developed to model the fluid dynamics of flames immersed in an electric field. The main feature of this model is that it can use complex ionization mechanisms without increasing the computational cost of the simulation. The model is based on the assumption that the combustion process is not directly influenced by the electric field and has been tested using two chemi-ionization mechanisms of different complexity in order to examine its behavior with and without the presence of heavy anions in the mixture. Using a one- and two-dimensional numerical test cases, the present approach has been able to reproduce all the major aspects encountered when a flame is subject to an imposed electric field and the main effects of the different chemical mechanisms. Moreover, the proposed model is shown to produce a large reduction in the computational cost, being able to shorten the time needed to perform a simulation up to 40 times., Comment: 26 pages, 13 figures, paper accepted for publication on Computers and Fluids

We investigate the performance of a scheduling algorithm where the Mobile Terminals (MTs) may be turned off if they cause a level of interference greater than a given threshold. This approach, which is referred to as Interference Aware Muting (IAM), may be regarded as an interference-aware scheme that is aimed to reduce the level of interference. We analyze its performance with the aid of stochastic geometry and compare it against other interference-unaware and interference-aware schemes, where the level of interference is kept under control in the power control scheme itself rather than in the scheduling process. IAM is studied in terms of average transmit power, mean and variance of the interference, coverage probability, Spectral Efficiency (SE), and Binary Rate (BR), which accounts for the amount of resources allocated to the typical MT. Simplified expressions of SE and BR for adaptive modulation and coding schemes are proposed, which better characterize practical communication systems. Our system-level analysis unveils that IAM increases the BR and reduces the mean and variance of the interference. It is proved that an operating regime exists, where the performance of IAM is independent of the cell association criterion, which simplifies the joint design of uplink and downlink transmissions., Comment: 16 pages, 12 figures. This work has been submitted to the IEEE for possible publication

In this work we seek to characterise the performance of spatial modulation (SM) and spatial multiplexing (SMX) with an experimental test bed. Two National Instruments (NI)-PXIe devices are used for the system testing, one for the transmitter and one for the receiver. The digital signal processing that formats the information data in preparation of transmission is described along with the digital signal processing that recovers the information data. In addition, the hardware limitations of the system are also analysed. The average bit error ratio (ABER) of the system is validated through both theoretical analysis and simulation results for SM and SMX under line of sight (LoS) channel conditions., Comment: IEEE Transactions on Vehicular Technology, accepted