Search

In recent years, increasing attention has been given to reducing energy consumption in hydraulic excavators, resulting in extensive research in this field. One promising solution has been the integration of hydrostatic transmission (HST) and hydraulic pump/motor (HPM) configurations in parallel systems. However, these systems face challenges such as noise, throttling losses, and leakage, which can negatively impact both tracking accuracy and energy efficiency. To address these issues, this paper introduces an intelligent real-time prediction framework for system positioning, incorporating particle swarm optimization (PSO), long short-term memory (LSTM), a gated recurrent unit (GRU), and proportional–integral–derivative (PID) control. The process begins by analyzing real-time system data using Pearson correlation to identify hyperparameters with medium to strong correlations to the positioning parameters. These selected hyperparameters are then used as inputs for forecasting models. Independent LSTM and GRU models are subsequently developed to predict the system's position, with PSO optimizing four key hyperparameters of these models. In the final stage, the PSO-optimized LSTM-GRU models are employed to perform real-time intelligent predictions of motion trajectories within the system. Simulation and experimental results show that the model achieves a prediction deviation of less than 3 mm, ensuring precise real-time predictions and providing reliable data for system operators. Compared to traditional PID and LSTM-GRU-PID controllers, the proposed controller demonstrated superior tracking accuracy while also reducing energy consumption, achieving energy savings of up to 10.89% and 2.82% in experimental tests, respectively. [ABSTRACT FROM AUTHOR]

Configuring green power transmissions for heavy-industry marines is treated as a crucial request in an era of global energy and pollution crises. Following up on this hotspot trend, this paper examines the effectiveness of a modified optimization-based energy management strategy (OpEMS) for a dual proton exchange membrane fuel cells (dPEMFCs)-battery-ultra-capacitors (UCs)-driven hybrid electric vessels (HEVs). At first, the summed power of the dual PEMFCs is defined by using the equivalent consumption minimum strategy (ECMS). Accordingly, a map search engine (MSE) is proposed to appropriately split power for each FC stack and maximize its total efficiency. The remaining power is then distributed to each battery and UC using an adaptive co-state, timely determined based on the state of charge (SOC) of each device. Due to the strict constraint of the energy storage devices' (ESDs) SOC, one fine-corrected layer is suggested to enhance the SOC regulations. With the comparative simulations with a specific rule-based EMS and other approaches for splitting power to each PEMFC unit, the effectiveness of the proposed topology is eventually verified with the highest efficiency, approximately about 0.505, and well-regulated ESDs' SOCs are obtained. [ABSTRACT FROM AUTHOR]

This paper proposes an output feedback-based control for uncertain electro-hydrostatic systems (EHSs) to satisfy high output tracking precision under the influences of unknown mismatched and matched uncertainties and unstructured dynamical behavior. In this configuration, an extended state observer (ESO) is first employed to obtain unmeasured states and suppress the adverse effect of matched uncertainty. Meanwhile, the influence of unstructured dynamical behavior is approximated by employing a radial basis function neural network (RBFNN)-based technique. With the unmeasured states observed, matched uncertainty, and system dynamics compensated, the robust backstepping sliding mode control is accordingly established and the lumped mismatched uncertainty is then suppressed through disturbance observer-based adaptive law. Interestingly, the proposed control methodology requires only output feedback but can address the whole system dynamics. The stability of the closed-loop system is theoretically proven through a Lyapunov theorem and the effectiveness of the proposed methodology is demonstrated through comparative simulations. [ABSTRACT FROM AUTHOR]

This article proposes a novel real-time optimization-based energy management strategy (EMS) for proton membrane exchange fuel cell (PEMFC)-battery-supercapacitors-driven hybridized-electric tramways (HETs). The proposed algorithm is derived based on an enhanced extremum seeking (ES) algorithm, with a new equivalent state-of-charge (SOC) and a new adaptive co-state introduced. Thereby, optimized reference power for each power source can be distributed appropriately when using three components. The workability and prominent of the proposed technique are demonstrated through comparative simulations with fuzzy-rule-based EMS (FEMS) and equivalent consumption minimization strategy (ECMS) in two case studies: with and without considering the supercapacitors, as an important factor in the EMS design to stabilize the SOC of energy storage devices (ESDs). Briefly, under the proposed ES-based method, the PEMFC power can be regulated such that high-efficiency can be performed, approximately by 46.7%. Subsequently, the hydrogen consumption is reduced about 31.2% compared to a comparative fuzzy-based EMS. Besides, the supplements' SOCs at the end of a driving cycle are also regulated to be equal to the initial ones. [ABSTRACT FROM AUTHOR]

In this paper, a novel design of an energy regeneration system was proposed for recovering as well as reusing potential energy in a boom cylinder. The proposed system included a hydraulic pump/motor and an electrical motor/generator. When the boom moved down, the energy regeneration components converted the hydraulic energy to electrical energy and stored in a battery. Then, the regenerated energy was reused at subsequent cycles. In addition, an energy management strategy has been designed based on discrete time-optimal control to guarantee position tracking performance and ensure component safety during the operation. To verify the effectiveness of the proposed system, a co-simulation (using MATLAB and AMESim) was carried out. Through the simulation results, the maximum energy regeneration efficiency could achieve up to 44%. Besides, the velocity and position of the boom cylinder achieved good performance with the proposed control strategy. [ABSTRACT FROM AUTHOR]