Search

The Extrusion Benchmark 2023 was focused on the evaluation of different die design strategies for the manufacturing of AA6082 hollow tubes (40 mm external diameter and 4 mm thickness) through a porthole die with 3 openings. The extrusion process was monitored in industrial environment in terms of press load, profiles speed, profiles exit temperature, and die temperatures under different processing conditions (air quenching, water quenching, nitrogen die cooling). Extruded profiles were then analyzed in terms of seam weld quality, charge weld extension and microstructure evolution for both air/water quench and presence/absence of nitrogen cooling. The results of the study are aimed at validating FEM simulation outputs in the context of the International Conference on Extrusion and Benchmark (ICEB).

Materials characterization and the knowledge of their elastic-plastic behavior are of fundamental importance for the design of industrial manufacturing processes. Nowadays, FEM simulation is the main tool used to optimize product quality and minimize scraps, and the numerical codes have evolved over the years to obtain accurate solutions with reduced computational times. Nevertheless, in order to perform reliable simulations, it is necessary to include accurate modeling of the material flow stress. Hot torsion is a powerful method for the characterization of the material flow stress because, tests can be carried out at constant speeds and temperatures, reaching large strain values, and thus getting over the limits of compression and tensile tests. In this paper the hot torsion characterization applied to AA6082 alloy is presented: tests were performed with equivalent strain rates of 0.01, 0.1, 1, and 10 s-1, in the temperature range from 440 to 550 °C (from 713.15 to 823.15 K). The results are presented in terms of equivalent stress vs equivalent strain. Finally, the material flow stress curve was predicted by the Hyperbolic sine model and Hensel-Spittel law, and the material parameters A, m1-9 are provided for the temperature expressed in °C and K.

Nitrogen cooling has been identified as a powerful industrial solution for the hot extrusion process to remove heat in the die and in the profile. The complexity involved in the design of cooling channels depends on many factors, including the cooling path, its position with respect to the hottest zones as well as the nitrogen phase change that strongly affects the heat removal capacity. However, the industrial approach is still stuck in the empirical and based-experience practices that too often strongly limit the possibilities of obtaining a performing cooling solution. In this context, this work intends to summarize and discuss the advanced recent trends in the design of cooling channels for extrusion dies proposed by the authors based on the numerical approaches, with the final aim to propose possible solutions to fill the current gaps of the suboptimal industrial approaches.

The microstructure evolution during the extrusion process of AA6XXX aluminum alloys is getting a significant interest from extruders and researchers because of the effect of the grain structure on the extruded component properties. Several process and material parameters such as chemical composition, homogenization, temperature evolution, extrusion speed, geometries and quenching have a direct impact on the final grain size of extruded profiles. Because there are so many affecting elements, it is extremely challenging to forecast the microstructure evolution and, as a result, research activities are still required to understand and control the aluminum alloy recrystallization behaviour. In this work, a methodology for the microstructural characterization of AA6XXX aluminum alloys is proposed. The methodology involves the experimental investigation of the profile grain evolution during the extrusion process, the development of a AA6XXX recrystallization model optimized to describe the AA6063 recrystallization behaviour and the simulation by means of finite element method of the final microstructure of the extruded profile.