Search

This paper proposes a resolver offset calibration algorithm that can detect offset with high precision just by configuring a very simple experimental environment. This use of a simple experimental environment holds a great advantage for large-capacity permanent magnet synchronous motors (PMSMs) that require substantial resources to configure an experimental environment, such as EV traction motors. The proposed algorithm is designed based on the PMSM voltage equation. The algorithm is first verified for its validity through simulation with Simulink. Subsequently, it is implemented based on the C-language and installed on an inverter for verification experiments. The implemented algorithm is very simple and requires little execution time and memory. The error in the calibrated offset is experimentally found to converge within 3-bits based on 12-bits (the resolution of the commonly used RDC), and the results have very little deviation.

Purpose: The effects of dexmedetomidine on locomotor function and thermal hyperalgesia in sciatic nerve crush injury (SNCI) were investigated using rats.Methods: After exposing the right sciatic nerve, the sciatic nerve was crushed for 1 minute by a surgical clip. One day after nerve injury, dexmedetomidine (5, 25, and 50 µg/kg) was directly applied to the injured sciatic nerve once a day for 14 days. Walking track analysis was used to assess locomotor function and plantar test was conducted to assess thermal pain sensitivity. Immunohistochemistry was performed to determine the expression of c-Fos in the ventrolateral periaqueductal gray (vlPAG) and paraventricular nucleus (PVN). Western blot was used to evaluate the expression level of nerve growth factor (NGF) and myelin basic protein (MBP) in the sciatic nerve.Results: SNCI resulted in deterioration of locomotor function and increased thermal pain sensitivity. The level of c-Fos expression in the PVN and vlPAG was increased and the level of NGF and MBP expression in the sciatic nerve was enhanced by SNCI. Dexmedetomidine treatment improved locomotor function and upregulated expression of NGF and MBP in the sciatic nerve of SNCI. Dexmedetomidine treatment alleviated thermal hyperalgesia and downregulated expression of c-Fos in the vlPAG and PVN after SNCI.Conclusions: Dexmedetomidine may be used as a potential new treatment drug for recovery of locomotion and control of pain in peripheral nerve injury.

New high-k gate dielectrics are highly necessary in facilitating the continuous down-scaling of metal–oxide–semiconductor devices to the sub-10 nm range. This study presents ultrathin organic hydrocarbon (HC) films as a novel high-k gate insulator for metal–insulator–semiconductor (MIS) devices. During inductively-coupled plasma chemical vapor deposition with CH4 and H2 gases, the growth temperature greatly affects the structure of the carbon layers and consequently their dielectric characteristics. Specifically, sp2-rich dielectric HC layers are formed below 600 °C, whereas highly-ordered sp2-hybridized graphene is formed at 950 °C. The k value of the resulting HC films increases up to a maximum value of 90 at 350 °C. Moreover, the MIS devices exhibit excellent gate-insulating properties, including almost no hysteresis in the capacitance–voltage curve, low leakage current, and high dielectric strength, which surpass those of existing high-k gate oxides. These results reveal that the organic HC films are a promising next-generation high-k gate dielectric material for sub-10 nm node Si and organic semiconductor technologies.

Lithium–ion solvation governs the performance of lithium metal anode (LMA) by tuning its interfacial stability. Solvation degree is modulated by adopting fluorinated non-solvating cosolvents (FNSC) to induce anion-rich solvation structure which is beneficial in constructing mechanically stable interface to suppress lithium dendrite. However, FNSC exhibits low cathodic stability owing to their low lowest unoccupied molecular orbital (LUMO) level, aggravating long-term cycling of LMA. We establish that spectroscopically measured Lewis basicity and polarity are critical parameters for designing optimal non-solvating cosolvents. Non-fluorinated non-solvating cosolvents (NFNSC) proposed by our design rule (i.e. anisole, ethoxybenzene and furan) delivered 99.0 % coulombic efficiency over 1400 cycles. In these molecules, the aromatic ring delocalizes oxygen electron pairs and lowers solvation capability, confirmed by electrochemical cycling, Raman spectroscopy, and DFT binding energy calculation. Finally, the quantification of remaining NFNSC in the electrolytes using nuclear magnetic resonance spectroscopy proves their reductive stability for extended cycles.

In-vehicle communication systems are usually managed by controller area networks (CAN). By broadcasting packets to their bus, the CAN facilitates the interaction between Electronic Control Units (ECU) that coordinate, monitor and control internal vehicle components. With no authentication mechanism for identifying the legitimacy and source of packets, CAN are vulnerable to cyber-attacks. An Intrusion Detection System (IDS) can detect attacks on CAN and machine learning can be used to create the models for the IDSs to detect non-linear attack patterns. However, car manufacturers and owners might want to keep the sensitive information required for training the models confidential. Therefore, we proposed a Blockchain-based Federated Forest Software-Defined Networking (SDN)-enabled IDS (BFF-IDS) to address the problem of data sharing the sensitive CAN data. To ensure scalability, we used InterPlanetary File System (IPFS) to host the models, and the blockchain is designed to store only a hash of the model and a pointer to its location. The SDN provides the dynamic routing of packets and model exchanges. We used Federated Learning (FL) to create a random forest model. Individuals provide partially trained models, allowing them to keep the underlying data confidential. Using Fourier transform, we decomposed the CAN IDs cycle from CAN bus traffic in the frequency domain for better generalization in multiclass detection of attacks. Multiple statistical and entropy features were extracted to handle the high complexity and non-linearity in CAN bus traffic. The proposed system allows manufacturers and car owners to contribute to the training of the models, as their sensitive data is protected. By storing hashes of the models on a blockchain, the risk of adversaries poisoning the models is reduced and a single point of failure is avoided. We evaluated the proposed system by conducting experiments on a testbed. We found that the proposed system has efficient use of memory and CPU resources and that the detection rate of closely related attacks was high. We recorded the highest model attack detection rate of about 0.981.

A controllable approach that combines surface plasmon resonance and two-dimensional (2D) graphene/MoS2 heterojunction has not been implemented despite its potential for efficient photoelectrochemical (PEC) water splitting. In this study, plasmonic Ag-decorated 2D MoS2 nanosheets were vertically grown on graphene substrates in a practical large-scale manner through metalorganic chemical vapor deposition of MoS2 and thermal evaporation of Ag. The plasmonic Ag-decorated MoS2 nanosheets on graphene yielded up to 10 times higher photo-to-dark current ratio than MoS2 nanosheets on indium tin oxide. The significantly enhanced PEC activity could be attributed to the synergetic effects of SPR and favorable graphene/2D MoS2 heterojunction. Plasmonic Ag nanoparticles not only increased visible-light and near-infrared absorption of 2D MoS2, but also induced highly amplified local electric field intensity in 2D MoS2. In addition, the vertically aligned 2D MoS2 on graphene acted as a desirable heterostructure for efficient separation and transportation of photo-generated carriers. This study provides a promising path for exploiting the full potential of 2D MoS2 for practical large-scale and efficient PEC water-splitting applications.

Highlights Controllable and large-scale practical growth of plasmonic Ag-decorated vertically aligned 2D MoS2 nanosheets on graphene.Realization of the synergistic effects of surface plasmon resonance and favorable graphene/MoS2 heterojunction to enhance the photoelectrochemical reactivity of 2D MoS2. Electronic supplementary material The online version of this article (10.1007/s40820-020-00512-3) contains supplementary material, which is available to authorized users., A controllable approach that combines surface plasmon resonance and two-dimensional (2D) graphene/MoS2 heterojunction has not been implemented despite its potential for efficient photoelectrochemical (PEC) water splitting. In this study, plasmonic Ag-decorated 2D MoS2 nanosheets were vertically grown on graphene substrates in a practical large-scale manner through metalorganic chemical vapor deposition of MoS2 and thermal evaporation of Ag. The plasmonic Ag-decorated MoS2 nanosheets on graphene yielded up to 10 times higher photo-to-dark current ratio than MoS2 nanosheets on indium tin oxide. The significantly enhanced PEC activity could be attributed to the synergetic effects of SPR and favorable graphene/2D MoS2 heterojunction. Plasmonic Ag nanoparticles not only increased visible-light and near-infrared absorption of 2D MoS2, but also induced highly amplified local electric field intensity in 2D MoS2. In addition, the vertically aligned 2D MoS2 on graphene acted as a desirable heterostructure for efficient separation and transportation of photo-generated carriers. This study provides a promising path for exploiting the full potential of 2D MoS2 for practical large-scale and efficient PEC water-splitting applications. Electronic supplementary material The online version of this article (10.1007/s40820-020-00512-3) contains supplementary material, which is available to authorized users.

The depth-resolved magnetic configuration of a Ga0.97Mn0.03As/GaAs:Be multilayer with an antiferromagnetic interlayer exchange coupling was investigated using surface-sensitive soft x-ray resonant magnetic reflectivity (XRMR). We observed intriguing opposite increments in the XRMR intensities at the half-Bragg peak position between two different remanent states with opposite field sweep directions. A quantitative analysis shows that these opposite intensity increments result from two different anti-parallel spin configurations in such a way that the magnetization of top-most magnetic layer is pinned along the saturation magnetization direction before the remanent state. This surface pinning effect is important for understanding spin-dependent transport in semiconducting magnetic multilayers.

The intratubular renin-angiotensin system (RAS) is thought to play an essential role in hypertensive renal disease, but information regarding sex-related differences in this system is limited. The present study investigated sex differences in the intratubular RAS in two-kidney, one-clip (2K1C) rats. A 2.5-mm clip was placed on the left renal artery of Sprague-Dawley rats, and rats were euthanized 3 or 5 wk after the operation. Systolic blood pressure increased in 2K1C rats in both sexes but was significantly higher in male rats than in female rats, and an antihypertensive effect was not observed in 2K1C ovariectomized (OVX) female rats. Compared with male 2K1C rats, intratubular angiotensin-converting enzyme (ACE) and ANG II were repressed, and intratubular ACE2, angiotensin (1–7), and Mas receptor were increased in both kidneys in female 2K1C rats 5 wk after surgery. Comparison with male and female rats and intratubular mRNA levels of ACE and ANG II type 1 receptor were augmented in OVX female rats, regardless of the clipping surgery 3 wk postoperation. ANG II type 2 receptor was upregulated in female rats with or without OVX; thus, the ANG II type 1-to-type 2 receptor ratio was higher in male rats than in female rats. In conclusion, female rats were protected from hypertensive renal and cardiac injury after renal artery clipping. An increase in the intratubular nonclassic RAS [ACE2/angiotensin (1–7)/Mas receptor] and a decrease in the ANG II type 1-to-type 2 receptor ratio could limit the adverse effects of the classic RAS during renovascular hypertension in female rats, and estrogen is suggested to play a primary role in the regulation of intratubular RAS components.

The coordinate transformation method of asymmetric dual three phase synchronous motor (ADTP-SM) is a Double dq transform using two dq-axes and a vector space decomposition (VSD) model method using the orthogonality of ADTP-SM. There are several studies comparing the two methods in a healthy state, but few in a single-phase open fault state. In the healthy, when the VSD model is applied, different harmonic orders of the phase current are projected onto the dq and xy-axes (the axis for controlling harmonics of the phase current), and the two-axes are orthogonal, so it can be controlled stably. In the single-phase open fault state, the same current control logic as in the healthy situation is applied. When applying the Double dq transform, the dq-axis of the fault set fluctuates, and it affects the healthy set, so it cannot be controlled stably. When applying the VSD model, if both the dq-axis and the xy-axis are controlled, the two coordinate systems do not have orthogonality and cannot be stably controlled, due to mutual interference. However, if only the dq-axis is controlled, it can be controlled stably because there is no Cartesian coordinate system other than the dq-axis. In the healthy state and single-phase open fault state, the equation is verified through experiments and simulations, and the control stability according to the coordinate transformation is compared.

We report the direct and self-selective synthesis of Ag nanowires (NWs) on graphene patterns through a modified citrate reduction reaction approach. High-density NWs were selectively formed only on the graphene areas, whereas NWs were not synthesized on the SiO2/Si and glass substrates. The size and density of the Ag NWs gradually increased with increasing reaction time and AgNO3 concentration. When the Ag NWs were synthesized with 60 mM AgNO3 at 90 °C for 30 min, the average width and length of the NWs were approximately 150 nm and 3 μm, respectively. Graphene–Ag NW hybrids showed excellent light transmittance (91.5% at 550 nm) with low sheet resistance (102 Ω sq−1). These properties can be further optimized by manipulating the size and density of the Ag NWs. This simple and cost-effective process for the fabrication of graphene–Ag NW hybrid electrode patterns is useful for a variety of applications.

Hydrogen is an excellent energy carrier free of carbon dioxide emission, but safe and efficient storage of hydrogen has been a bottleneck for the commercial use of hydrogen as a fuel. Here, we present a strategy based on simple thermodynamic principles that the density of a gas residing in a potential well increases exponentially relative to the ambient gas by the corresponding Boltzmann factor. This mechanism allows for enormously enhanced H2 storage in the form of delocalized gas permeating throughout the void space of a material, in contrast to conventional storage localized to specific adsorption sites. We create mesoporous graphene oxide that provides a two-dimensional potential well and efficient hydrogen diffusion pathways. The gravimetric storage density measured with quartz-crystal microbalance reaches 4.65 wt% reproducibly at a modest pressure of 40 atm at room temperature. Our work demonstrates the attainability of the long-standing goal of room-temperature hydrogen storage.

This study was conducted to develop a model that explains the factors influencing the clinical nurses' willingness to perform Basic Life Support and to verify the appropriateness of the model. The participants were 550 clinical nurses working at a university hospital in Korea. The data were collected from self-reported questionnaires from October 2012 to February 2013. A total of 520 questionnaires were analyzed using the SPSS/WIN 20.0 and Amos version 18.0 software packages. The results indicated that the clinical nurses' knowledge of basic life supporthad a direct impact and their clinical experience had an indirect impact on their willingness to perform basic life support at the scene. These variables together explained 19.5% of the variance in the nurses' willingness to performBasic Life Support. The clinical experience was correlated significantly with knowledge (r=.61, p

This article presents data obtained from the atomic force microscopy (AFM) images of ultrathin high-k hydrocarbon (HC) films. The high-k HC films were synthesized on Si(100) wafers at various growth temperatures by using inductively-coupled plasma chemical vapor deposition with CH4 gas and a gas mixture consisting of 10% H2 and 90% Ar. The AFM images were obtained by tapping mode. The AFM results provide the surface topography, roughness, and thickness of the HC films as a function of growth temperature, which are essential data for high-k gate dielectrics of metal-insulator-semiconductor device applications. This data article is related to the article entitled, “Novel high-k gate dielectric properties of ultrathin hydrocarbon films for next-generation metal-insulator-semiconductor devices” (Kim et al., 2020) [1] .

This paper describes the synthetic effort for a Zn-MOF imparting Ti-H as a preferential binding site potentially capturing H{sub 2} molecules via Kubas-type interaction. The formation mechanism of Ti-H innate to the final material was potentially demonstrated to follow a radical dissociation rather than a β-hydrogen elimination and a C-H reductive elimination. - Graphical abstract: This study details the synthesis and the formation mechanism of Zn-MOF adsorbent site-isolating TiH{sub 3} that can potentially capture H{sub 2} molecules via Kubas-binding mechanism. - Highlights: • OH-functionalized Zn-MOF was employed as a reactive template to site-isolate TiH{sub 3}. • This MOF was post-synthetically modified using a tetracyclohexyl titanium (IV). • This intermediate was hydrogenolyzed to change ligand from cyclohexyl to hydride. • Formation mechanism of TiH{sub 3} was investigated via two control GC–MS experiments. • Final Zn-MOF potentially site-isolating TiH{sub 3} species was used as a H{sub 2} adsorbent.

Information technology and medical advances in technology transformed the paradigm of health. In the past, the focus had been on the treatment, but today the current focus is towards maintaining health. This is research project based on the outdoors, running, walking, biking, in contrast to indoor exercise (weight training) can be utilized in an area where research is lacking. This paper is based on a variety of indoor acceleration sensor movement get figures for the record. This sensor sends data obtained through the Web and market themselves through a suitable exercise program or from users through their Smartphone with purchased recommended programs. Through this research, may be able to have goal-oriented exact figures in the future.

We present a simple, ultrasonic vibration-assisted lift-off-based patterning approach for graphene and graphene–Ag nanowire (NW) hybrid films. A 20 μm width pattern with uniform and smooth pattern edges was neatly defined on various rigid and flexible substrates. The patterned graphene–Ag NW electrodes showed a low sheet resistance of 19 Ω/sq with a high transmittance of 93% at 550 nm, a robust stability against oxidation, and a high reliability under a bending test. The electrodes also exhibited markedly higher performance than that of commercial fluorine-doped tin oxide electrodes for dye-sensitized solar cells. Given its low-cost, high throughput, and nondamaging effect, this simple and reliable patterning approach stimulates the practical applications of graphene-based flexible transparent electrodes in soft electronic and optoelectronic devices.

Dexmedetomidine (Precedex) is a selective α2-adrenoceptor agonist that shows opioid-sparing effects with reduced inhalational anesthetic requirement. Since the possibility that dexmedetomidine could induce nerve degeneration has not been completely ruled out, we evaluated whether it can induce apoptosis in rats when used in a nerve block. We performed hematoxylin and eosin staining, terminal deoxynucleotidyl transferase-mediated dUTP nick end labeling (TUNEL) assays, immunohistochemistry for caspase-3 and neurofilament, and western blotting for BAX, Bcl-2, and nerve growth factor (NGF) in the brachial plexus of rats. The axillary brachial plexus was carefully exposed and 100 μl (40 µg/kg) dexmedetomidine was administered directly. Rats were sacrificed at 6 h, 12 h, or 24 h after dexmedetomidine administration. In the present study, dexmedetomidine did not exert any effects on histological findings and neurofilament expression. The number of TUNEL-positive and caspase-3-positive cells in the brachial plexu...

본 연구는 2급 응급구조사 병원임상실습교육의 효과와 만족도를 조사한 연구로써 2급 응급구조사 전문화 교육의 만족도를 높이고, 효과적으로 운영하기 위한 기초자료를 제공하는데 목적이 있다. 조사대상은 2013년 7월 29일부터 8월 22일까지 2급 응급구조사 병원임상실습교육에 참여한 70명의 2급 응급구조사로 하였으며 구조화된 무기명 자기기입식 설문지를 이용하여 조사하였다. 연구결과 대상자가 자가평가한 업무능력은 교육 전이 3.09점, 교육 후 3.73점으로 유의한차이를 보였고, 교육만족도는 3.80점으로 나타났다. 대상자들이 생각하는 교육적정기간은 1주~2주가 64.3%였고, 2급 응급구조사 자격과정을 오래전에 수료했을수록 교육만족도가 높았다. 향후 2급 응급구조사 병원임상실습교육의 요구도, 문제점 등을 파악하기 위한 다각적인 연구가 필요하며, 수련을 담당하는 의료기관의 실습교육 모니터링을 포함하는 프로그램의 개발이 필요하다.ABSTRACTThis study is analysis of the effectiveness and satisfaction index of hospital-based skill training (HST) in level 2 emer-gency medical technicians. The purpose of this study is to provide basic data for the effective operation. The survey car-ried out to 70 level 2 emergency medical technicians who participate in HST from July 29 to August 22 in 2013. From thestudy, self evaluated operation skills scale were 3.09 before training and 3.80 after training. It showed statistically signifi-cant enhancements. satisfaction index were 3.80. appopriate education periods were (1~2) weeks (64.3%). the longer thetime had been since their training completion, the higher education satisfaction. The multilateral studies on problems andneeds of HST and development of training programs that includes hospital training monitoring are necessary.Keywords : Level 2 emergency medical technician, Hospital-based skill training, Effectiveness, Satisfaction