Search

Electroactive biofilms (EABs) have aroused wide concern in waste treatment due to their unique capability of extracellular electron transfer with solid materials. The combined effect of different operating conditions on the formation, microbial architecture, composition, and metabolic activity of EABs are still unknown. In this study, the impact of three different factors (anode electrode, substrate concentration and resistance) on the acclimation and performance of EABs was investigated. The results showed that the shortest start-up time of 127.3 h and highest power density of 0.84 W m− 2 were obtained with carbon brush as electrode, low concentration of substrate (1.0 g L− 1) and 1000 Ω external resistance (denoted as N1). The EABs under N1 condition also represented strongest redox capacity, the lowest internal resistance, and close arrangement of bacteria. Moreover, the EABs cultured under different conditions both showed similar results, with direct electron transfer (DET) dominated from EABs to anode. Microbial community compositions indicated that EABs under N1 condition with lowest diversity and highest abundance of electroactive bacteria (46.68%). Higher substrate concentration (3.0 g L− 1) promoted the proliferation of some other bacteria without electroactivity, which was adverse to EABs. The metabolic analysis showed the difference of genes related to electron transfer (Cytochromes C and pili) and biofilm formation (xap) of EABs under different conditions, which further demonstrated the higher electroactivity of EABs under N1. These results provided a comprehensive understanding of the effect of different operating conditions on EABs including biofilm formation and electrochemical activity.

Nitrogen stripping plays a vital role during the sulfate-rich wastewater treatment process by sulfate-reducing bacteria (SRB). However, the interaction between nitrogen stripping, sulfate reduction capacity, S2– concentration, and microbial community structure is rarely studied. Here, two anaerobic systems were conducted to analyze these interactions simultaneously. Results showed that the toxic products (H2S) were stripped by nitrogen at first. Then, the increased relative abundance of fermentative bacteria accelerated the carbon sources conversion, and Desulfovibrio, Dethiosulfovibrio, and Sulfurospirillum facilitated the sulfate reduction after nitrogen stripping. Finally, the produced S2− concentration was increased by 12%, and the sulfate reduction rate was increased by 9.2% compared to that without nitrogen stripping.

In this study, four kinds of In2O3 photocatalysts were prepared by a facile calcination process at different temperatures and used for the removal of perfluorooctanoic acid (PFOA) from contaminated...

Sulfate-reducing bacteria (SRB)-based anaerobic process has aroused wide concern in the treatment of sulfate-containing wastewater. Chemical oxygen demand-to-sulfate ratio (COD/SO42-) and HRT are two key factors that affect not only the anaerobic treatment performance but also the activity of SRB. In this study, an anaerobic sequencing batch reactor was constructed, and the effects of different operating parameters (COD/SO42-, HRT) on the relationship of sulfate (SO42-) reduction performance, microbial communities, and metabolic pathways were comprehensively investigated. The results indicated that the SO42- removal rates could achieve above 95% under different operating parameters. Bioinformatics analysis revealed that microbial community changed with reactor operation. At the genus level, the enrichment of Propionicclava and Peptoclostridium contributed to the establishment of a homotrophic relationship with Desulfobulbus, the dominant SRB in the reactor, which indicated that they took vital part in maintaining the structural and functional stability of the bacterial community under different operating parameters. In particular, an increasing trend of the relative abundance of functional genes encoding dissimilatory sulfate reduction was detected with the increase of COD/SO42-, which indicated high SO42- reduction potentials. This knowledge will help to reveal the mechanism of the effect of operating parameters on the anaerobic sulfate removal process, thus providing effective guidance for the targeted regulation of anaerobic sequencing batch bioreactors treating SO42--containing wastewater.

Bioaugmentation is a green technology for oil pollution remediation, and its potential to oil-polluted seawater with different deep-sea microorganisms has not been investigated. The present study aimed to comprehensively analyze the oil degradation ability difference and the microbial community successions to oil-polluted seawater with different deep-sea microorganisms by bioaugmentation through the construction of original overlying seawater, natural restored oil-polluted overlying seawater, and bioaugmented oil-polluted overlying seawater from four different sites. Results showed that bioaugmentation was valid for the treatment of oil-polluted seawater with different deep-sea microorganisms, and the highest oil degradation efficiency was 61.15% after 50 days, which was 50% higher than that of natural restoration. In addition, bioaugmentation of oil-polluted seawater played a driving role in increasing the relative abundance of indigenous bacterial genera, such as Cycloclasticus, Alcanivorax, Ulvibacter, and Erythrobacter and they all contributed to crude oil degradation. Furthermore, the microbial changes influenced by environmental factors can lead to differences in oil degradation rates, especially for Cycloclasticus, which is positively correlated with longitude. This work can improve the understanding of bioaugmentation remediation strategy development in deep-sea environment.

Sewage sludge (SS) is increasingly used as an environment functional material to reduce or control pollution and improve plant growth because of the large amounts of carbon and essential plant nutrients in it. To achieve the best application results, it is essential to comprehensively review recent progress in SS utilization. This review aims to fill the gaps in knowledge by describing the properties of SS, and its usage as adsorbents, catalysts and fertilizers, and certain application mechanisms. Although SS generates several benefits for the environment and humans, many challenges still exist to limit the application, including the risks posed by potentially toxic substances (e.g., heavy metals) in SS. Therefore, future research directions are discussed and how to make SS applications more feasible in terms of technology and economy.

Signaling molecules are useful in biofilm formation, but the mechanism for biofilm construction still needs to be explored. In this study, a signaling molecule, N-butyryl-l-Homoserine lactone (C4-HSL), was supplied to enhance the construction of the sulfate-reducing bacteria (SRB) bio-cathode biofilm in microbial electrolysis cell (MEC). The sulfate reduction efficiency was more than 90% in less time under the system with C4-HSL addition. The analysis of SRB bio-cathode biofilms indicated that the activity, distribution, microbial population, and secretion of extracellular polymers prompted by C4-HSL, which accelerate the sulfate reduction, in particular for the assimilatory sulfate reduction pathway. Specifically, the relative abundance of acidogenic fermentation bacteria increased, and Desulfovibrio was co-metabolized with acidogenic fermentation bacteria. This knowledge will help to reveal the potential of signaling molecules to enhance the SRB bio-cathode biofilm MEC construction and improve the performance of treating sulfate-containing wastewater.

Clean energy like hydrogen can be a promising strategy to solve problems of global warming. Photo-fermentation (PF) is an attractive technology for producing biohydrogen from various biowastes cost-effectively and environmentally friendly. However, challenges of low light conversion efficiency and small yields of biohydrogen production still limit its application. Thus, advanced strategies have been investigated to enhance photo-fermentative biohydrogen production. This review discusses advanced technologies that show positive outcomes in improving biohydrogen production by PF, including the following. Firstly, genetic engineering enhances light transfer efficiency, change the activity of enzymes, and improves the content of ATP, ammonium and antibiotic tolerance of photosynthetic bacteria. Secondly, immobilization technology is refined. Thirdly, nanotechnology makes great strides as a scientific technique and fourthly, integration of dark and photo-fermentation technology is possible. Some suggestions for further studies to achieve high levels of efficiency of photo-fermentative biohydrogen production are mentioned in this paper.

Bioremediation of petroleum contaminated seawater by immobilized bacteria has gained great interests. Better understanding the responses and migration mechanisms of indigenous seawater bacteria is significant for analyzing the bioremediation mechanism. In this paper, the specific bacteria, Shewanella algae (Sp1), was immobilized by Enteromorpha biochar. The immobilized Sp1 and exogenous nutrients were used as bio-augmentation and bio-stimulation, and the degradation rate of diesel could reach 97.3 ± 2.1% after 30-day remediation. Interestingly, the microbial community analysis demonstrated that Sp1, immobilized in the beads, disappeared after bioremediation, while some indigenous bacteria in the seawater, including genus Alcanivorax, Parvibaculum, Hyphomonas and so on, were detected in the internal of the immobilized beads. This phenomenon indicated that some genus might migrate from seawater into the immobilized beads, presumably attributed to the fact that the immobilized beads gave protection for these bacteria. This finding could serve as a new evidence to clarify the succession of microbial community in bioremediation process, which had not been reported in previous studies. Meanwhile, this study could make contribution to the investigation of potential secondary marine pollution in the bioremediation process.

As a clean energy carrier, hydrogen is a promising alternative to fossil fuel so as the global growing energy demand can be met. Currently, producing hydrogen from biowastes through fermentation has attracted much attention due to its multiple advantages of biowastes management and valuable energy generation. Nevertheless, conventional dark fermentation (DF) processes are still hindered by the low biohydrogen yields and challenges of biohydrogen purification, which limit their commercialization. In recent years, researchers have focused on various advanced strategies for enhancing biohydrogen yields, such as screening of super hydrogen-producing bacteria, genetic engineering, cell immobilization, nanomaterials utilization, bioreactors modification, and combination of different processes. This paper critically reviews by discussing the above stated technologies employed in DF, respectively, to improve biohydrogen generation and stating challenges and future perspectives on biowaste-based biohydrogen production.

Immobilized bacteria system plays an important role during degradation process in oil contaminated seawater. Although the immobilized bacteria system can be recycled to avoid pollution after remediation, it remains an open question on whether or not the secondary pollution occurs during the degradation process. Additionally, the research on the role of immobilized bacteria system in the process of oil removal is not clear enough. In this study, both the diesel degradation rate of diesel by immobilized bacteria system and changes in marine microbial community structure were determined to explore the role of immobilized bacteria system. The immobilized bacteria system was added to the diesel polluted seawater (1% diesel) for 30 days. The degradation performance was investigated during the process, and the microbial community structure was analyzed simultaneously. The results illustrated that the degradation rate of diesel by immobilized bacteria system reached 78.39% after 30 days, and Alcanivorax (59.09%), Achromobacter (24.34%) and Thalassospira (9.84%) were the dominant genera in the immobilized bacteria system. The addition of immobilized bacteria system increased the content of nitrogen and phosphorus, and then promoted the growth of oil-degrading bacteria. Thus, functional genes related to oil degradation increased. Additionally, there was little difference in the microbial composition between the treated seawater and the unpolluted seawater. Based on all results, it can be inferred that immobilized bacteria system triggered and stimulated diesel degradation process. This study provides a promising way to improve the removal of oil, and provides theoretical support for the wide application of immobilized microorganism technology.

This study investigated the effect of CaO2 pretreatment on sulfonamide antibiotics (SMs) remediation by Chlorella sp. Results showed that a CaO2 dose ranging from 0.05 to 0.1 g/g biomass was the best and led to higher SMs removal efficacy 5-10% higher than the control. The contributions made by cometabolism and CaO2 in SMs remediation were very similar. Bioassimilation could remove 24% of sulfadiazine (SDZ) and sulfamethazine (SMZ), and accounted for 38% of sulfamethoxazole (SMX) remediation. Pretreatment by CaO2 wielded a positive effect on microalgae. The extracellular polymeric substances (EPS) level of the CaO2 pretreatment microalgae was three times higher when subjected to non-pretreatment. For the long-term, pretreatment microalgae removed SMs 10-20% more than the non-pretreatment microalgae. Protein fractions of EPS in continuous operation produced up to 90 mg/L for cometabolism. For bioassimilation, SMX intensity of the pretreatment samples was 160-fold less than the non-treatment one. It indicated the CaO2 pretreatment has enhanced the biochemical function of the intracellular environment of microalgae. Peroxidase enzyme involved positively in the cometabolism and degradation of SMs to several metabolites including ring cleavage, hydroxylation and pterin-related conjugation.

Resistant pollutants like oil, grease, pharmaceuticals, pesticides, and plastics in wastewater are difficult to be degraded by traditional activated sludge methods. These pollutants are prevalent, posing a great threat to aquatic environments and organisms since they are toxic, resistant to natural biodegradation, and create other serious problems. As a high-efficiency biocatalyst, enzymes are proposed for the treatment of these resistant pollutants. This review focused on the roles and applications of enzymes in wastewater treatment. It discusses the influence of enzyme types and their sources, enzymatic processes in resistant pollutants remediation, identification and ecotoxicity assay of enzymatic transformation products, and typically employed enzymatic wastewater treatment systems. Perspectives on the major challenges and feasible future research directions of enzyme-based wastewater treatment are also proposed.

Anaerobic membrane bioreactors (AnMBRs), the combination of anaerobic digestion and membrane technology, have gained increasing popularity due to their remarkable advantages over aerobic membrane bioreactors, such as biogas production and potential energy use. However, membrane fouling remains a challenging issue that deteriorates the performance of membrane and shortens its lifespan. Pretreatment of feed wastewater by adding fouling reduction enhancers, such as adsorbents and flocculants, into anaerobic membrane bioreactor can effectively mitigate membrane fouling by altering the feed properties. Activated carbon, such as powdered activated carbon (PAC) and granular activated carbon (GAC), has been widely applied as an adsorbent to aerobic and anaerobic membrane bioreactors for membrane fouling control. Organic enhancers such as biochar and waste yeast, and inorganic enhancers like polyaluminum chloride and zeolite have also been applied to AnMBRs promoting flocculation and coagulation. Thus, this review discusses the impacts of different fouling reduction enhancers under anaerobic conditions as well as AnMBR system. In addition, the mechanisms of the enhancers mitigating the membrane fouling are also summarized for better understanding of the effects of the enhancers in AnMBRs.

Microbial fuel cell (MFC) systems are promising technologies for wastewater treatment and renewable energy generation simultaneously. Performance of a double-chamber microbial fuel cell (MFC) to treat synthetic swine wastewater containing sulfonamide antibiotics (SMs) was evaluated in this study. The MFC was operated in continuous modes at different conditions. Results indicated that the current was successfully generated during the operation. The performance of MFC under the sequential anode-cathode operating mode is better than that under the single continuous running mode. Specifically, higher removal efficiency of chemical oxygen demand (>90%) was achieved under the sequential anode-cathode operating mode in comparison with that in the single continuous mode (>80%). Nutrients were also be removed in the MFC's cathode chamber with the maximum removal efficiency of 66.6 ± 1.4% for NH4+-N and 32.1 ± 2.8% for PO43--P. Meanwhile, SMs were partly removed in the sequential anode-cathode operating with the value in a range of 49.4%-59.4% for sulfamethoxazole, 16.8%-19.5% for sulfamethazine and 14.0%-16.3% for sulfadiazine, respectively. SMs' inhibition to remove other pollutants in both electrodes of MFC was observed after SMs exposure, suggesting that SMs exert toxic effects on the microorganisms. A positive correlation was found between the higher NH4+-N concentration used in this study and the removal efficiency of SMs in the cathode chamber. In short, although the continuous flow MFC is feasible for treating swine wastewater containing antibiotics, its removal efficiency of antibiotics requires to be further improved.

Enzymatic processing has been considered an interesting technology as enzymes play important roles in the process of waste bioconversion, whilst heling to develop valuable products from animal wastes. In this paper, the application of enzymes in animal waste management were critically reviewed in short with respect to utilization in: (i) animal wastewater treatment and (ii) animal manure management. The results indicate that the application of enzymes could increase both chemical oxygen demand (COD) removal efficiency and production of biogas. The enzymatic bioprocesses were found to be affected by the type, source and dosage of enzymes and the operating conditions. Further studies on optimizing the operating conditions and developing cost-effective enzymes for the future large-scale application are therefore necessary.

The proper treatment of swine wastewater with relatively high concentrations of antibiotics is very important to protect environmental safety and human health. Microbial fuel cell (MFC) technology shows much promise for removing pollutants and producing electricity simultaneously. A double-chamber MFC was investigated in this study. Synthetic swine wastewater with the addition of sulfonamides was used as the fuels in the anode chamber. Results indicated that COD could be effectively removed (>95%) and virtually not affect by the presence of sulfonamides in the MFC. A stable voltage output was also observed. The removal efficiencies of sulfamethoxazole (SMX), sulfadiazine (SDZ), and sulfamethazine (SMZ) in the MFC were in the 99.46-99.53%, 13.39-66.91% and 32.84-67.21% ranges, respectively. These totals were higher than those reported for a traditional anaerobic reactor. Hence, MFC revealed strong resistance to antibiotic toxicity and high potential to treat swine wastewater with antibiotics.

The presence of organic micro-pollutants (OMPs) in wastewater has attracted increasing scientific community interest due to the risks they pose to the environment. Biological treatment systems have emerged as a promising technology for the removal of these compounds. Biotransformation is identified as the main mechanism for removing OMPs from wastewater in biological processes. This chapter summarizes current knowledge on the biotransformation of OMPs during aerobic and anaerobic biological wastewater treatment processes, respectively. In both aerobic and anaerobic treatment processes, the biotransformation of OMPs mainly occurs through cometabolism. The activity of ammonia-oxidizing bacteria and methanogen plays a very significant part in OMP biotransformation. The OMP biotransformation pathway and extent can be influenced by the biological processes’ operating parameters. These mainly include sludge retention time, hydraulic retention time, temperature, pH, and primary biotransformable substrates. Moreover, the combination of aerobic and anaerobic technologies in hybrid reactor systems is likely to enhance overall OMP biotransformation efficiency and degree. Further studies are required to investigate the biotransformation products of OMPs and their level of toxicity to the environment. More in-depth knowledge about parameters influencing OMP biotransformation as documented in this chapter and other possible factors is required to improve biological processes in terms of technical effectiveness and economic competitiveness in the future.

Currently, antibiotic wastewater is generating serious concerns worldwide due to the toxic effects of antibiotics and putting antibiotic resistance at risk. Anaerobic membrane bioreactor (AnMBR) is a promising technology for treating antibiotic wastewater due to its ability to withstand high organic loading, produce less sludge, and lower operating costs when compared with conventional activated sludge processes. This chapter discusses the following: (1) sources and potential risks of antibiotics in wastewater; (2) the performance of AnMBRs for treating antibiotic wastewater; (3) the impact of operating parameters on antibiotics and antibiotic resistance genes (ARGs); (4) the effect of antibiotics on the performance and membrane fouling of the AnMBR system; and (5) the novel AnMBR configurations that can improve the treatment phase and overcome technological limitations. Results show that the efficiency in removing antibiotics and ARGs ranged from 34.6% to 100% in the AnMBR system, as a consequence of the combined contribution of microbial degradation, adsorption of anaerobic sludge, and retention and adsorption of the cake layer that was formed on the membrane surface. The AnMBR system’s ability to treat antibiotic wastewater may be improved by adjusting its operating parameters. Antibiotics in wastewater can affect the microorganisms in AnMBRs and accelerate membrane fouling. The anaerobic fluidized membrane bioreactor (AFMBR) and anaerobic electrochemical membrane bioreactor (AnEMBR) are promising novel AnMBR configurations that can first improve the removal efficiency of antibiotics and then slow down the development of membrane fouling layers, but more research is required on the feasibility of AFMBR and AnEMBR for antibiotic wastewater treatment.

To tackle membrane fouling and limited removals of pollutants (nutrients and emerging pollutants) that hinder the wide applications of membrane bioreactor (MBR), attached growth MBR (AGMBR) combining MBR and attached growth process has been developed. This review comprehensively presents the up-to-date developments of media used in both aerobic and anaerobic AGMBRs for treating wastewaters containing conventional and emerging pollutants. It also elaborates the properties of different media, characteristics of attached biomass, and their contributions to AGMBR performance. Conventional media, such as biological activated carbon and polymeric carriers, induce formation of aerobic, anoxic and/or anaerobic microenvironment, increase specific surface area or porous space for biomass retention, improve microbial activities, and enrich diverse microorganisms, thereby enhancing pollutants removal. Meanwhile, new media (i.e. biochar, bioaugmented carriers with selected strain/mixed cultures) do not only eliminate conventional pollutants (i.e. high concentration of nitrogen, etc.), but also effectively remove emerging pollutants (i.e. micropollutants, nonylphenol, adsorbable organic halogens, etc.) by forming thick and dense biofilm, creating anoxic/anaerobic microenvironments inside the media, enriching special functional microorganisms and increasing activity of microorganisms. Additionally, media can improve sludge characteristics (i.e. less extracellular polymeric substances and soluble microbial products, larger floc size, better sludge settleability, etc.), alleviating membrane fouling. Future studies need to focus on the development and applications of more new functional media in removing wider spectrum of emerging pollutants and enhancing biogas generation, as well as scale-up of lab-scale AGMBRs to pilot or full-scale AGMBRs.

Antibiotic wastewater has become a major concern due to the toxicity and recalcitrance of antibiotics. Anaerobic membrane bioreactors (AnMBRs) are considered alternative technology for treating antibiotic wastewater because of their advantages over the conventional anaerobic processes and aerobic MBRs. However, membrane fouling remains the most challenging issue in the AnMBRs' operation and this limits their application. This review critically discusses: (i) antibiotics removal and antibiotic resistance genes (ARGs) in different types of AnMBRs and the impact of antibiotics on membrane fouling and (ii) the integrated AnMBRs systems for fouling control and removal of antibiotics. The presence of antibiotics in AnMBRs could aggravate membrane fouling by influencing fouling-related factors (i.e., sludge particle size, extracellular polymeric substances (EPS), soluble microbial products (SMP), and fouling-related microbial communities). Conclusively, integrated AnMBR systems can be a practical technology for antibiotic wastewater treatment.

Recently, the extensive discharge of oily sludge, due to excessive use of fossil oil, has become a serious worldwide concern, as it leads to serious environmental pollution and even threat human health. However, the complex properties and compositions of oily sludge make it difficult for the treatment of oily sludge. This study proposed a novel method of combined degradation of oily sludge by surfactants with activated-persulfate, and analyzed the degradation efficiency and degradation pathway. The organics in oil sludge were eluted by surfactant, and the residual oil difficult to be eluted was further oxidized by activated persulfate. The combined method significantly improved the degradation efficiency of oily sludge, and the removal rate reached 94.6 ± 2.8%, and the oil content of the residual oily sludge was 0.57%, which had reached the discharge standard. The mechanism analysis indicated that surfactant could increase the solubility of oil by reducing the surface tension, and the hydroxyl radical and sulfate radical generated by activated persulfate could degrade the complex organic matters into small molecule matters, achieving efficient degradation of oil sludge. This work demonstrated a new avenue for the efficient and cost-effective treatment of oily sludge, opening an environmentally friendly treatment concept.

The effect of powdered activated carbon (PAC) addition to a conventional anaerobic membrane bioreactor (AnMBR) on removal performance and membrane fouling was explored in this study. The optimal one-off PAC dose could increase average chemical oxygen demand (COD) and total organic carbon (TOC) removal rates up to 15.7% and 15.6%, respectively. The PAC addition exhibited not only lower TMP increase rate, but also reduced soluble microbial product (SMP) and extracellular polymeric substances (EPS). Higher protein to polysaccharide ratio of SMP and higher zeta potential in AnMBR with PAC could enhance hydrophobicity and flocculation ability, thereby effectively alleviating membrane fouling. Lower total membrane resistance and pore blocking resistance indicated that PAC addition could prevent both severe pore blocking and irreversible fouling, due to the lower polysaccharide level in SMP of the cake layer. Moreover, PAC addition facilitated the decrease in fouling-related bacteria such as Cloacibacterium and Paludibacter.

High concentrations of antibiotics in swine wastewater pose potentially serious risks to the environment, human and animal health. Identifying the mechanism for removing antibiotics during the anaerobic treatment of swine wastewater is essential for reducing the serious damage they do to the environment. In this study, batch experiments were conducted to investigate the biosorption and biodegradation of tetracycline and sulfonamide antibiotics (TCs and SMs) in anaerobic processes. Results indicated that the removal of TCs in the anaerobic reactor contributed to biosorption, while biodegradation was responsible for the SMs' removal. The adsorption of TCs fitted well with the pseudo-second kinetic mode and the Freundlich isotherm, which suggested a heterogeneous chemisorption process. Cometabolism was the main mechanism for the biodegradation of SMs and the process fitted well with the first-order kinetic model. Microbial activity in the anaerobic sludge might be curtailed due to the presence of high concentrations of SMs.

Swine wastewater (SW) is an important source of antibiotics and hormones (A&H) in the environment due to their large-scale application in swine industry. A&H in SW can be released into the water environment through the direct discharge of SW, effluent from SW treatment plants, and runoff and leaching from farmland polluted by swine wastes. The presence of A&H in the water environment has become an increasing global concern considering their adverse effects to the aquatic organism and human. This review critically discusses: (i) the occurrence of A&H in global water environment and their potential risks to water organisms and human; (ii) the management and technical approaches for reducing the emission of A&H in SW to the water environment. The development of antibiotic alternatives and the enhanced implementation of vaccination and biosecurity are promising management approaches to cut down the consumption of antibiotics during swine production. Through the comparison of different biological treatment technologies for removing A&H in SW, membrane-based bioprocesses have relatively higher and more stable removal efficiencies. Whereas, the combined system of bioprocesses and AOPs is expected to be a promising technology for elimination and mineralization of A&H in swine wastewater. Further study on this system is therefore necessary.

Waste animal fats and proteins (WAFP) are rich in various animal by-products from food industries. On one hand, increasing production of huge amounts of WAFP brings a great challenge to their appropriate disposal, and raises severe risks to environment and life health. On the other hand, the high fat and protein contents in these animal wastes are valuable resources which can be reutilized in an eco-friendly and renewable way. Sustainable enzymatic technologies are promising methods for WAFP management. This review discussed the application of various enzymes in the conversion of WSFP to value-added biodiesel and bioactivate hydrolysates. New biotechnologies to discover novel enzymes with robust properties were proposed as well. This paper also presented the bio-utilization strategy of animal fat and protein wastes as alternative nutrient media for microorganism growth activities to yield important industrial enzymes cost-effectively.

A sequential anode-cathode double-chamber microbial fuel cell (MFC) is a promising system for simultaneously removing contaminants, recovering nutrients and producing energy from swine wastewater. To improve sulfonamide antibiotics (SMs)’s removal in the continuous operating of MFC, one new pomelo peel-derived biochar was applied in the anode chamber in this study. Results demonstrated that SMs can be absorbed onto the heterogeneous surfaces of biochar through pore-filling and π-π EDA interaction. Adding biochar to a certain concentration (500 mg/L) could enhance the efficiency in removing sulfamethoxazole, sulfadiazine and sulfamethazine to 82.44 - 88.15%, 53.40 - 77.53% and 61.12 - 80.68%, respectively. Moreover, electricity production, COD and nutrients removal were improved by increasing the concentration of biochar. Hence, it is proved that adding biochar in MFC could effectively improve the performance of MFC in treating swine wastewater containing SMs.

The feasibility of a novel bioflocculant (GemFloc™) for membrane fouling mitigation in membrane bioreactor (MBR) was investigated during real municipal wastewater treatment. When compared to the conventional MBR (CMBR), suspended sludge in the MBR with GemFloc™ (G-MBR) showed less soluble microbial products (SMP), higher ratios of proteins to polysaccharides in SMP (SMPP/SMPC) and loosely bound extracellular polymeric substances (LB-EPS). Adding GemFloc™ also enlarged floc size (> 200 µm), and increased tightly bound EPS levels, zeta potential and relative hydrophobicity of sludge flocs, further reduced cake layer and pore blocking resistances. Moreover, more diverse microbial community and enrichment of fouling reduction microbes such as Arenimonas and Flavihumibacter were observed in the G-MBR, together with less abundant microbes (e.g. Sphaerotilus and Povalibacter) which could aggravate membrane fouling. Therefore, GemFloc™ has high capability in improving sludge characteristics, mitigating membrane fouling and increasing diversity of special functional bacterial community in MBR.

Removal of tetracycline antibiotics (TCs) by biochar adsorption is emerging as a cost-effective and environmentally friendly strategy. This study developed a novel pomelo peel derived biochar, which was prepared at 400 °C (BC-400) and 600 °C (BC-600) under nitrogen conditions. To enhance the adsorption capacity, BC-400 was further activated by KOH at 600 °C with a KOH: BC-400 ratio of 4:1. The activated biochar (BC-KOH) displayed a much larger surface area (2457.37 m2/g) and total pore volume (1.14 cm3/g) than BC-400 and BC-600. High adsorption capacity of BC-KOH was achieved for removing tetracycline (476.19 mg/g), oxytetracycline (407.5 mg/g) and chlortetracycline (555.56 mg/g) simultaneously at 313.15 K, which was comparable with other biochars derived from agricultural wastes reported previously. The adsorption data could be fitted by the pseudo-second-order kinetic model and Langmuir isotherm model successfully. The initial solution pH indicated the potential influence of TCs adsorption capacity on BC-KOH. These results suggest that pore filling, electrostatic interaction and π–π interactions between the adsorbent and adsorb ate may constitute the main adsorption mechanism. BC-KOH can be used as a potential adsorbent for removing TCs from swine wastewater effectively, cheaply and in an environmentally friendly way.

Ever-increasing swine wastewater (SW) has become a serious environmental concern. High levels of nutrients and toxic contaminants in SW significantly impact on the ecosystem and public health. On the other hand, swine wastewater is considered as valuable water and nutrient source for microalgae cultivation. The potential for converting the nutrients from SW into valuable biomass and then generating bioenergy from it has drawn increasing attention. For this reason, this review comprehensively discussed the biomass production, SW treatment efficiencies, and bioenergy generation potentials through cultivating microalgae in SW. Microalgae species grow well in SW with large amounts of biomass being produced, despite the impact of various parameters (e.g., nutrients and toxicants levels, cultivation conditions, and bacteria in SW). Pollutants in SW can effectively be removed by harvesting microalgae from SW, and the harvested microalgae biomass elicits high potential for conversion to valuable bioenergy.

Swine wastewaters with high levels of organic pollutants and antibiotics have become serious environmental concerns. Anaerobic technology is a feasible option for swine wastewater treatment due to its advantage in low costs and bioenergy production. However, antibiotics in swine wastewater have problematic effects on micro-organisms, and the stability and performance of anaerobic processes. Thus, this paper critically reviews impacts of antibiotics on pH, COD removal efficiencies, biogas and methane productions as well as the accumulation of volatile fatty acids (VFAs) in the anaerobic processes. Meanwhile, impacts on the structure of bacteria and methanogens in anaerobic processes are also discussed comprehensively. Furthermore, to better understand the effect of antibiotics on anaerobic processes, detailed information about antimicrobial mechanisms of antibiotics and microbial functions in anaerobic processes is also summarized. Future research on deeper knowledge of the effect of antibiotics on anaerobic processes are suggested to reduce their adverse environmental impacts.

Antibiotics and hormones in swine wastewater have become a critical concern worldwide due to the severe threats to human health and the eco-environment. Removal of most detectable antibiotics and hormones, such as sulfonamides (SAs), SMs, tetracyclines (TCs), macrolides, and estrogenic hormones from swine wastewater utilizing various biological processes were summarized and compared. In biological processes, biosorption and biodegradation are the two major removal mechanisms for antibiotics and hormones. The residuals in treated effluents and sludge of conventional activated sludge and anaerobic digestion processes can still pose risks to the surrounding environment, and the anaerobic processes' removal efficiencies were inferior to those of aerobic processes. In contrast, membrane bioreactors (MBRs), constructed wetlands (CWs) and modified processes performed better because of their higher biodegradation of toxicants. Process modification on activated sludge, anaerobic digestion and conventional MBRs could also enhance the performance (e.g. removing up to 98% SMs, 88.9% TCs, and 99.6% hormones from wastewater). The hybrid process combining MBRs with biological or physical technology also led to better removal efficiency. As such, modified conventional biological processes, advanced biological technologies and MBR hybrid systems are considered as a promising technology for removing toxicants from swine wastewater.