6 results on '"Drehmer, Luis Roberto Centeno"'
Search Results
2. An interval-based multi-objective robust design optimization for vehicle dynamics.
- Author
-
Drehmer, Luis Roberto Centeno, Gomes, Herbert Martins, and Paucar Casas, Walter Jesus
- Subjects
- *
ROBUST optimization , *ROOT-mean-squares , *INTERVAL analysis , *STATISTICS , *PARAMETERS (Statistics) - Abstract
This study presents an Interval-based Multi-objective Robust Design Optimization (IB-MORDO) algorithm applied to a vehicle dynamic problem. The proposed algorithm optimizes a full 15 degrees-of-freedom (15-DOF) vehicle model, subjected to a double-lane change (DLC) maneuver under random road profiles, to attain driver comfort and safety. This study does not make assumptions about uncertain parameter statistics; instead, the uncertainties are quantified using a non-probabilistic α-cut level interval analysis. These uncertainties are applied to the system parameters and design variables to ensure robust results. After the optimization process, the root mean square (RMS) vertical acceleration at the driver's seat resulted in a robust solution of 1.041 m/s2 and a parameter interval radius (IR) equals to 0.631 m/s2, whereas the RMS lateral acceleration at the driver's seat resulted in a solution of 1.908 m/s2 with an interval radius of 0.168 m/s2. Unlike the Robust Optimization, the algorithm proposed herein considers uncertainties at system parameters and design variables without assuming any statistical data. An Interval-based Robust Multi-objective Optimization procedure is proposed and tested on a 15-DOF vehicle model. Αn α-cut level methodology is used to deal with the uncertainty propagation. Resulted optimal suspension parameters minimize center and interval radius of driver's vertical and lateral accelerations. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
3. An interval-based multi-objective robust design optimization for vehicle dynamics
- Author
-
Drehmer, Luis Roberto Centeno, primary, Gomes, Herbert Martins, additional, and Paucar Casas, Walter Jesus, additional
- Published
- 2022
- Full Text
- View/download PDF
4. Otimização robusta multiobjetivo por análise de intervalo não probabilística : uma aplicação em conforto e segurança veicular sob dinâmica lateral e vertical acoplada
- Author
-
Drehmer, Luis Roberto Centeno, Casas, Walter Jesus Paucar, and Gomes, Herbert Martins
- Subjects
Motoristas ,Multiobjective robust design optimization ,Segurança veicular ,Biodynamic model ,Vehicle model ,Interval analysis ,Uncertainty Quantification ,Vehicle comfort and safety ,Vertical dynamics ,Simulação numérica ,α-cut level method ,Lateral dynamics ,Otimização matemática - Abstract
Esta Tese propõe uma nova ferramenta para Otimização Robusta Multiobjetivo por Análise de Intervalo Não Probabilística (Non-probabilistic Interval Analysis for Multiobjective Robust Design Optimization ou NPIA-MORDO). A ferramenta desenvolvida visa à otimização dos parâmetros concentrados de suspensão em um modelo veicular completo, submetido a uma manobra direcional percorrendo diferentes perfis de pista, a fim de garantir maior conforto e segurança ao motorista. O modelo multicorpo possui 15 graus de liberdade (15-GDL), dentre os quais onze pertencem ao veículo e assento, e quatro, ao modelo biodinâmico do motorista. A função multiobjetivo é composta por objetivos conflitantes e as suas tolerâncias, como a raiz do valor quadrático médio (root mean square ou RMS) da aceleração lateral e da aceleração vertical do assento do motorista, desenvolvidas durante a manobra de dupla troca de faixa (Double Lane Change ou DLC). O curso da suspensão e a aderência dos pneus à pista são tratados como restrições do problema de otimização. As incertezas são quantificadas no comportamento do sistema pela análise de intervalo não probabilística, por intermédio do Método dos Níveis de Corte-α (α-Cut Levels) para o nível α zero (de maior dispersão), e realizada concomitantemente ao processo de otimização multiobjetivo. Essas incertezas são aplicáveis tanto nos parâmetros do problema quanto nas variáveis de projeto. Para fins de validação do modelo, desenvolvido em ambiente MATLAB®, a trajetória do centro de gravidade da carroceria durante a manobra é comparada com o software CARSIM®, assim como as forças laterais e verticais dos pneus. Os resultados obtidos são exibidos em diversos gráficos a partir da fronteira de Pareto entre os múltiplos objetivos do modelo avaliado Os indivíduos da fronteira de Pareto satisfazem as condições do problema, e a função multiobjetivo obtida pela agregação dos múltiplos objetivos resulta em uma diferença de 1,66% entre os indivíduos com o menor e o maior valor agregado obtido. A partir das variáveis de projeto do melhor indivíduo da fronteira, gráficos são gerados para cada grau de liberdade do modelo, ilustrando o histórico dos deslocamentos, velocidades e acelerações. Para esse caso, a aceleração RMS vertical no assento do motorista é de 1,041 m/s² e a sua tolerância é de 0,631 m/s². Já a aceleração RMS lateral no assento do motorista é de 1,908 m/s² e a sua tolerância é de 0,168 m/s². Os resultados obtidos pelo NPIA-MORDO confirmam que é possível agregar as incertezas dos parâmetros e das variáveis de projeto à medida que se realiza a otimização externa, evitando a necessidade de análises posteriores de propagação de incertezas. A análise de intervalo não probabilística empregada pela ferramenta é uma alternativa viável de medida de dispersão se comparada com o desvio padrão, por não utilizar uma função de distribuição de probabilidades prévia e por aproximar-se da realidade na indústria automotiva, onde as tolerâncias são preferencialmente utilizadas. This thesis proposes the development of a new tool for Non-probabilistic Interval Analysis for Multi-objective Robust Design Optimization (NPIA-MORDO). The developed tool aims at optimizing the lumped parameters of suspension in a full vehicle model, subjected to a double-lane change (DLC) maneuver throughout different random road profiles, to ensure comfort and safety to the driver. The multi-body model has 15 degrees of freedom (15-DOF) where 11-DOF represents the vehicle and its seat and 4-DOF represents the driver's biodynamic model. A multi-objective function is composed by conflicted objectives and their tolerances, like the root mean square (RMS) lateral and vertical acceleration in the driver’s seat, both generated during the double-lane change maneuver. The suspension working space and the road holding capacity are used as constraints for the optimization problem. On the other hand, the uncertainties in the system are quantified using a non-probabilistic interval analysis with the α-Cut Levels Method for zero α-level (the most uncertainty one), performed concurrently in the multi-objective optimization process. These uncertainties are both applied to the system parameters and design variables to ensure the robustness in results. For purposes of validation in the model, developed in MATLAB®, the path of the car’s body center of gravity during the maneuver is compared with the commercial software CARSIM®, as well as the lateral and vertical forces from the tires. The results are showed in many graphics obtained from the Pareto front between the multiple conflicting objectives of the evaluated model. The obtained solutions from the Pareto Front satisfy the conditions of the evaluated problem, and the aggregated multi-objective function results in a difference of 1.66% for the worst to the best solution. From the design variables of the best solution choose from the Pareto front, graphics are created for each degree of freedom, showing the time histories for displacements, velocities and accelerations. In this particular case, the RMS vertical acceleration in the driver’s seat is 1.041 m/s² and its tolerance is 0.631 m/s², but the RMS lateral acceleration in the driver’s seat is 1.908 m/s² and its tolerance is 0.168 m/s². The overall results obtained from NPIA-MORDO assure that is possible take into account the uncertainties from the system parameters and design variables as the external optimization loop is performed, reducing the efforts in subsequent evaluations. The non-probabilistic interval analysis performed by the proposed tool is a feasible choice to evaluate the uncertainty if compared to the standard deviation, because there is no need of previous well-known based probability distribution and because it reaches the practical needs from the automotive industry, where the tolerances are preferable.
- Published
- 2017
5. Optimization of lumped parameters of suspension for vehicle comfort and safety
- Author
-
Drehmer, Luis Roberto Centeno, Gomes, Herbert Martins, and Casas, Walter Jesus Paucar
- Subjects
Motoristas ,Particle swarm optimization ,Vehicle model ,Veículos ,Vibração ,Safety ,Comfort ,Otimização matemática ,Frequency domain - Abstract
O presente trabalho avalia a otimização de parâmetros concentrados de suspensão em veículos e considera a importância deste processo para minimizar a aceleração vertical rms transmitida para garantir conforto e segurança ao motorista. Dessa forma, o trabalho objetiva desenvolver uma modelagem capaz de representar o veículo completo para então otimizar os parâmetros de rigidez e amortecimento no domínio da frequência e identificar, em torno do ponto ótimo, quais desses parâmetros mais influenciam nessa minimização. Para atingir esses objetivos, dois modelos veiculares (com dois e oito graus de liberdade respectivamente) são propostos conforme as orientações das normas BS 6841 (1987), ISO 8608 (1995) e ISO 2631 (1997). Os modelos são analisados linearmente e otimizados por um algoritmo heurístico de enxame de partículas. Finalmente, os resultados de rigidez e amortecimento da suspensão são obtidos e reduzem em até 35,3% a aceleração vertical rms transmitida ao motorista. Por meio de uma análise de sensibilidade, as variáveis de projeto que mais contribuem para essa redução são identificadas. The present work evaluates the optimization of lumped parameters of suspension on vehicles and considers the importance of this process to minimize the rms vertical acceleration transmitted to ensure comfort and safety to the driver. Thus, this work aims to develop a model able to represent the whole vehicle and, then, optimize the parameters of stiffness and damping in the frequency domain and identify, around the optimal point, those parameters which most influence in this minimization. To achieve these goals, two vehicle models (with two and eight degrees of freedom respectively) are proposed according to the guidelines of the standards BS 6841 (1987), ISO 8608 (1995) and ISO 2631 (1997). The models are linearly analyzed and optimized by a heuristic algorithm of particle swarm. Finally, the results of stiffness and damping of suspension are obtained and reduces up to 35,3% of rms vertical acceleration transmitted to the driver. Through a sensitivity analysis, the design variables that most contribute to this reduction are identified.
- Published
- 2012
6. Parameters optimisation of a vehicle suspension system using a particle swarm optimisation algorithm
- Author
-
Drehmer, Luis Roberto Centeno, primary, Paucar Casas, Walter Jesus, additional, and Gomes, Herbert Martins, additional
- Published
- 2015
- Full Text
- View/download PDF
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.