Search

A mobile laboratory integrating lidar, sun photometer and in situ instruments has been deployed to observe the aerosol spatial variability in North China Plain in May 2017. Results from the campaign are presented.

The paper presents the preliminary results of the lidar&radiometer measurement campaign (LRMC-2017), estimation of statistical relations between aerosol mode concentrations retrieved from CALIOP and ground-based lidar stations and case study of fire smoke events in the Eurasian regions using combined ground-based and space lidar and radiometer observations.

Aerosol absorption profiling is crucial for radiative transfer calculations and climate modelling. Here, we utilize the synergy of lidar with sun-photometer measurements to derive the absorption coefficient and single scattering albedo profiles during the ACTRIS-2 campaigns held in Germany, Greece and Cyprus. The remote sensing techniques are compared with in situ measurements in order to harmonize and validate the different methodologies and reduce the absorption profiling uncertainties.

Dust, maritime and dust-smoke mixture events observed during SHADOW2 (SaHAran Dust Over West Africa) field campaign are selected and analyzed by using Raman and GARRLiC retrievals. The derived aerosol optical and microphysical properties will be shown. Dust absorption profile and on ground level are derived from GARRLiC retrievals and Aethalometer measurements, respectively. Our results provide a closer insight about dust absorbing properties.

West Africa and the adjacent oceanic regions are very important locations for studying dust properties and their influence on weather and climate. The SHADOW (Study of SaHAran Dust Over West Africa) campaign is performing a multi-scale and multi-laboratory study of aerosol properties and dynamics using a set of in situ and remote sensing instruments at an observation site located at IRD (Institute for Research and Development) Center, Mbour, Senegal (14°N, 17°W). In this paper, we present the results of lidar measurements performed during the first phase of SHADOW which occurred in March-April, 2015. The multiwavelength Mie-Raman lidar acquired 3β+2α+1δ measurements during this period. This set of measurements has permitted particle intensive properties such as extinction and backscattering Ångström exponents (BAE) for 355/532 nm wavelengths corresponding lidar ratios and depolarization ratio at 532 nm to be determined. The backscattering Ångström exponent during the dust episodes decreased to ~-0.7, while the extinction Ångström exponent though being negative, was greater than -0.2. Low values of BAE can likely be explained by an increase in the imaginary part of the dust refractive index at 355 nm compared to 532 nm.

The importance of studying the vertical distribution of aerosol plumes is prominent in regional and climate studies. The new Generalized Aerosol Retrieval from Radiometer and Lidar Combined data algorithm (GARRLiC) provides this opportunity combining active and passive ground-based remote sensing from lidar and sunphotometer measurements. Here, we utilize GARRLiC capabilities for the characterization of Saharan dust and marine particles at the Eastern Mediterranean region during the Characterization of Aerosol mixtures of Dust And Marine origin Experiment (CHARADMExp). Two different case studies are presented, a dust-dominated case which we managed to characterize successfully in terms of the particle microphysical properties and their vertical distribution and a case of two separate layers of marine and dust particles for which the characterization proved to be more challenging.

The Plankton, Aerosol, Cloud, ocean Ecosystem (PACE) mission will carry into space the Ocean Color Instrument (OCI), a spectrometer measuring at 5nm spectral resolution in the ultraviolet (UV) to near infrared (NIR) with additional spectral bands in the shortwave infrared (SWIR), and two multi-angle polarimeters that will overlap the OCI spectral range and spatial coverage, i. e., the Spectrometer for Planetary Exploration (SPEXone) and the Hyper-Angular Rainbow Polarimeter (HARP2). These instruments, especially when used in synergy, have great potential for improving estimates of water reflectance in the post Earth Observing System (EOS) era. Extending the top-of-atmosphere (TOA) observations to the UV, where aerosol absorption is effective, adding spectral bands in the SWIR, where even the most turbid waters are black and sensitivity to the aerosol coarse mode is higher than at shorter wavelengths, and measuring in the oxygen A-band to estimate aerosol altitude will enable greater accuracy in atmospheric correction for ocean color science. The multi-angular and polarized measurements, sensitive to aerosol properties (e.g., size distribution, index of refraction), can further help to identify or constrain the aerosol model, or to retrieve directly water reflectance. Algorithms that exploit the new capabilities are presented, and their ability to improve accuracy is discussed. They embrace a modern, adapted heritage two-step algorithm and alternative schemes (deterministic, statistical) that aim at inverting the TOA signal in a single step. These schemes, by the nature of their construction, their robustness, their generalization properties, and their ability to associate uncertainties, are expected to become the new standard in the future. A strategy for atmospheric correction is presented that ensures continuity and consistency with past and present ocean-color missions while enabling full exploitation of the new dimensions and possibilities. Despite the major improvements anticipated with the PACE instruments, gaps/issues remain to be filled/tackled. They include dealing properly with whitecaps, taking into account Earth-curvature effects, correcting for adjacency effects, accounting for the coupling between scattering and absorption, modeling accurately water reflectance, and acquiring a sufficiently representative dataset of water reflectance in the UV to SWIR. Dedicated efforts, experimental and theoretical, are in order to gather the necessary information and rectify inadequacies. Ideas and solutions are put forward to address the unresolved issues. Thanks to its design and characteristics, the PACE mission will mark the beginning of a new era of unprecedented accuracy in ocean-color radiometry from space.

Wildfires and agricultural burning generate seemingly increasing smoke aerosol emissions, impacting societal and natural ecosystems. To understand smoke's effects on climate and public health, we analyzed the spatiotemporal distribution of smoke aerosols, focusing on two major light-absorbing components, namely black carbon (BC) and brown carbon (BrC) aerosols. Using NASA's Earth Polychromatic Imaging Camera (EPIC) instrument aboard NOAA's Deep Space Climate Observatory (DSCOVR) spacecraft, we inferred BC and BrC volume fractions and particle mass concentrations based on spectral absorption provided by the Multi-Angle Implementation of Atmospheric Correction (MAIAC) algorithm with 1–2 h temporal resolution and ∼ 10 km spatial resolution over North America and central Africa. Our analyses of regional smoke properties reveal distinct characteristics for aerosol optical depth (AOD) at 443 nm, spectral single-scattering albedo (SSA), aerosol layer height (ALH), and BC and BrC amounts. Smoke aerosols in North America showed extremely high AOD up to 6, with elevated ALH (6–7 km) and significant BrC components up to 250 mg m -2 along the transport paths, whereas the smoke aerosols in central Africa exhibited stronger light absorption (i.e., lower SSA) and lower AOD, resulting in higher-BC mass concentrations and similar BrC mass concentrations than the cases in North America. Seasonal burning source locations in central Africa, following the seasonal shift in the Intertropical Convergence Zone and diurnal variations in smoke amounts, were also captured. A comparison of retrieved AOD 443 , SSA 443 , SSA 680 , and ALH with collocated AERONET and CALIOP measurements shows agreement with RMSE values of 0.2, 0.03–0.04, 0.02–0.04, and 0.8–1.3 km, respectively. An analysis of the spatiotemporal average reveals distinct geographical characteristics in smoke properties closely linked to burning types and meteorological conditions. Forest wildfires over western North America generated smoke with a small-BC volume fraction of 0.011 and a high ALH with large variability (2.2 ± 1.2 km), whereas smoke from wildfires and agricultural burning over Mexico region shows more absorption and low ALH. Smoke from savanna fires over central Africa had the most absorption, with a high-BC volume fraction (0.015) and low ALH with a small variation (1.8 ± 0.6 km) among the analyzed regions. Tropical forest smoke was less absorbing and had a high variance in ALH. We also quantify the estimation uncertainties related to the assumptions of BC and BrC refractive indices. The MAIAC EPIC smoke properties with BC and BrC volume and mass fractions and assessment of the layer height provide observational constraints for radiative forcing modeling and air quality and health studies. [ABSTRACT FROM AUTHOR]

Satellite remote sensing of aerosol is largely conducted at moderate or coarse spatial resolution around 1–10 km. Nevertheless, at urban areas with high human activity, aerosol can originate from complex emission sources and may also vary strongly in space. Therefore, aerosol characterization at fine spatial resolution is essential for air quality study and assessment of anthropogenic pollution as well as climate effects. However, space‐borne instruments with high spatial resolution are usually limited in swath width or spectral coverage which result in lowering information content required for aerosol and surface retrieval. Based on the Generalized Retrieval of Atmosphere and Surface Properties (GRASP) algorithm, we propose a hybrid approach by combining fine and coarse spatial resolution measurements to retrieve aerosol and surface properties simulataneously at fine spatial resolution. The instruments with coarse spatial resolution and high revisting time can provide advanced aerosol characterization. At the same time, the instruments with fine spatial resolution are sensitive to spatial variability of aerosol nearby sources. In this study, the GRASP/Hybrid approach is demonstrated and tested based on the European Space Agency Sentinel‐5p/TROPOMI together with the Italian Space Agency PRISMA satellite data. Specifically, the detailed aerosol microphysical properties from Sentinel‐5p/TROPOMI 10 km retrievals are used as a priori information for PRISMA to derive aerosol loading and surface properties at 100 meter (m) spatial resolution. The PRISMA 100 m aerosol and surface retrieval based on the developed GRASP/Hybrid approach are evaluated using available ground‐based and satellite measurements, including AERONET, VIIRS/DB aerosol and PRISMA Level 2 surface reflectance products. Plain Language Summary: Both aerosol and surface characterization at high spatial resolution are always highly demanded especially over densely populated urban areas. However, the high spatial resolution space‐borne instruments typically have small swaths that, in general, reduce the possibility of aerosol and surface decoupling. In this paper, we develop a hybrid approach based on GRASP algorithm (GRASP/Hybrid) to retrieve aerosol and surface properties at fine spatial granularity by combining fine and coarse spatial resolution satellite data. The GRASP/Hybrid approach is demonstrated using European Space Agency (ESA) Sentinel‐5p/TROPOMI and Italian Space Agency (ASI) PRISMA (Hyperspectral Precursor of the Application Mission) measurements. Specifically, the detailed aerosol microphysical properties from Sentinel‐5p/TROPOMI 10 km retrievals are used as a priori information to derive aerosol loading and surface properties exploiting PRISMA at 100 m spatial resolution. Overall, the results obtained in this study demonstrate the big potential of the approach based on the combination of instruments for a number of climate and environment monitoring studies. Key Points: Generalized Retrieval of Atmosphere and Surface Properties (GRASP)/Hybrid approach is developed and demonstrated using Sentinel‐5p/TROPOMI and PRISMA measurementsPRISMA 100 m aerosol and surface properties are retrieved based on GRASP/Hybrid approach and evaluated using reference data setsWe demonstrate the big potential of hybrid approach based on the combination of instruments for climate and environment studies [ABSTRACT FROM AUTHOR]

Aerosols have important effects on both local and global climate, as well as on clouds and precipitations. We present some original results of the airborne AErosol RadiatiOn and CLOud in Southern Africa (AEROCLO-sA) field campaign led in Namibia in August and September 2017. In order to quantify the aerosols radiative impact on the Namibian regional radiative budget, we use an innovative approach that combines the OSIRIS polarimeter and lidar data to derive heating rate of the aerosols. To calculate this parameter, we use a radiative transfer code and meteorological parameters provided by dropsondes. This approach is evaluated during massive transports of biomass burning particles above clouds. We present vertical profiles of heating rates computed in the solar and thermal parts of the spectrum. Our results indicated strong pos i tive heating rate values retrieved above clouds due to aerosols, between +2 and +5 Kelvin per day (vertically averaged). Within the smoke layer, water vapor's cooling effect through infrared radiation generally balances its warming effect from solar radiation. At the top of the layer, a stronger cooling effect of −1.5 K/day often dominates due to water vapor. In order to validate this methodology, we use irradiance measurements acquired during sounding performed with the aircraft during dedicated parts of the flights, which provides direct measurements of irradiances distribution and heating rates in function of the altitude. Finally, we discuss the possibility to apply this method to available and future spaceborne passive and active sensors. [ABSTRACT FROM AUTHOR]

This study focuses on the comparison of aerosol columnar aerosol optical depth (AOD) and lidar ratios together with vertical profiles of aerosol extinction and backscatter at 532 nm retrieved over the King Abdullah University of Science and Technology (KAUST) campus observation site for the period of 2019–2022 using the Generalized Retrieval of Atmosphere and Surface Properties (GRASP) and Micro-Pulse Lidar Network (MPLNET) approaches. An emphasis is placed on independent analysis of daylight and nighttime retrievals to estimate how strongly the differences in the assumptions of both methods made in the absence of nighttime AOD observations influence the retrieval results. Additionally, two aerosol products provided by GRASP excluding and including the volume depolarization observations at 532 nm provided by MPLNET are analyzed to estimate the potential benefits of usage of depolarization data in aerosol profile retrievals. Overall, both columnar and vertical MPLNET and GRASP products demonstrated a better agreement for daytime retrievals for the GRASP product that excluded the depolarization information. At the same time, inclusion of the volume depolarization observations improved the agreement between MPLNET- and GRASP-estimated values at nighttime, both columnar and vertical. In addition, estimated values of daytime extinction profiles at ground level were compared to assess the impact of the assumption of a constant aerosol vertical distribution in the cutoff zone of lidar observations implied in GRASP. The values estimated by GRASP demonstrated a good agreement with MPLNET, for retrievals both including and excluding volume depolarization information. A seasonal variability in the diurnal cycle of aerosol properties estimated by GRASP over the KAUST site for the period 2019–2022 is presented, analyzed and discussed. [ABSTRACT FROM AUTHOR]

Wildfires and agricultural burning generate seemingly increasing smoke aerosol emissions, impacting societal and natural ecosystems. To understand smoke's effects on climate and public health, we analyzed the spatiotemporal distribution of smoke aerosols, focusing on two major light-absorbing components, black carbon (BC) and brown carbon (BrC) aerosols. Using NASA's Earth Polychromatic Imaging Camera (EPIC) instrument aboard the NOAA's Deep Space Climate Observatory (DSCOVR) spacecraft, we inferred BC and BrC volume fractions and particle mass concentrations based on spectral absorption provided by the Multi-Angle Implementation of Atmospheric Correction (MAIAC) algorithm with 1-2 hours temporal resolution and ~10 km spatial resolution over North America and Central Africa. Our analyses of regional smoke properties reveal distinct characteristics for aerosol optical depth (AOD) at 443 nm, spectral single scattering albedo (SSA), aerosol layer height (ALH), and BC and BrC amounts. Smoke cases in North America show extremely high AOD up to 6, with elevated ALH (6-7 km) and significant BrC components up to 250 mg/m2 along the transport paths, whereas the smoke aerosols in Central Africa exhibited stronger light absorption (i.e., lower SSA) and lower AOD, resulting in higher BC mass concentrations and similar BrC mass concentrations than the cases in North America. Seasonal burning source locations in Central Africa following the seasonal shift of Inter Tropical Convergence Zone and diurnal variations in smoke amounts were also captured. Comparison of retrieved AOD443, SSA443, SSA680, and ALH with collocated AERONET and CALIOP measurements shows agreement with rmse of 0.2, 0.03-0.04, 0.02-0.04, and 0.8-1.3 km, respectively. Analysis of spatiotemporally average reveals distinct geographical characteristics in smoke properties closely linked to burning types and meteorological conditions. Forest wildfires over western North America generated smoke with small BC volume fraction of 0.011 and high ALH with large variability (2.2 ± 1.2 km), whereas smoke from wildfires and agricultural burning over Mexico region shows more absorption and low ALH. Smoke from savanna fires over Central Africa has the most absorption with high BC volume fraction (0.015) and low ALH with small variation (1.8 ± 0.6 km) among the analyzed regions. Tropical forest smoke was less absorbing and had a high variance in ALH. We also quantify the estimation uncertainties related to the assumptions of BC and BrC refractive indices. The MAIAC EPIC smoke properties with BC and BrC volume and mass fractions and assessment of layer height provide observational constraints for radiative forcing modeling and air quality and health studies. [ABSTRACT FROM AUTHOR]

In this paper, we introduce a spectral surface reflectivity climatology based on observations made by TROPOMI on board the Sentinel-5P satellite. The database contains the directionally dependent Lambertian-equivalent reflectivity (DLER) of the Earth's surface for 21 wavelength bands ranging from 328 to 2314 nm and for each calendar month. The spatial resolution of the database grid is 0.125° × 0.125°. A recently developed cloud shadow detection technique is implemented to avoid dark scenes due to cloud shadow. In the database, the anisotropy of the surface reflection is described using a third-order parameterisation of the viewing angle dependence. The viewing angle dependence of the DLER is analysed globally and for a selection of surface type regions. The dependence is found to agree with the viewing angle dependence found in the GOME-2 surface DLER database. Differences exist, related to the actual solar position. On average, the viewing angle dependence in TROPOMI DLER is weaker than for GOME-2 DLER, but still important. Validation of the new database was first performed by comparison of the non-directional TROPOMI surface LER with heritage LER databases based on GOME-1 , OMI, SCIAMACHY, and GOME-2 data. Agreement was found within 0.002–0.02 in the UV-VIS (below 500 nm), up to 0.003 in the NIR (670–772 nm), and below 0.001 in the short-wave infrared (SWIR) (2314 nm). These performance numbers are dominated by the performance over ocean, but they are in most cases also representative for land surfaces. For the validation of the directional TROPOMI surface DLER, we made use of comparison with the MODIS surface bi-directional reflectance distribution function (BRDF) for a selection of surface type regions. In all cases the DLER performed significantly better than the traditional LER, and we found good agreement with the MODIS surface BRDF. The TROPOMI surface DLER database is a clear improvement on previous surface albedo databases and can be used as input not only for satellite retrievals from TROPOMI observations, but also for retrievals from observations from other polar-orbiting satellite instruments provided that their equator crossing time is close to that of TROPOMI. The algorithm that is introduced in this paper can be used for the retrieval of surface reflectivity climatologies from other polar satellite missions as well, including Ocean and Land Colour Instrument (OLCI) on the Sentinel-3 satellites, Sentinel-5, and Multi-viewing Multi-channel Multi-polarisation imager (3MI) on the MetOp-SG-A1 satellite to be launched in 2025, as well as the future CO2M mission. [ABSTRACT FROM AUTHOR]

From a passive satellite remote sensing point of view, the richest set of information on aerosol properties can be obtained from instruments that measure both intensity and polarization of backscattered sunlight at multiple wavelengths and multiple viewing angles for one ground pixel. However, it is challenging to exploit this information at a global scale because complex algorithms are needed with many fit parameters (aerosol and land/ocean reflection), based on online radiative transfer models. So far, two such algorithms have demonstrated this capability at a global scale: the Generalized Retrieval of Atmosphere and Surface Properties (GRASP) algorithm and the Remote sensing of Trace gas and Aerosol Products (RemoTAP) algorithm. In this paper, we present a detailed comparison of the most recent versions of RemoTAP and GRASP. We evaluate both algorithms for synthetic observations, for real PARASOL (Polarization and Anisotropy of Reflectances for Atmospheric Science coupled with Observations from a Lidar) observations against AERONET (Aerosol Robotic Network) for common pixels, and for global PARASOL retrievals for the year 2008. For the aerosol optical depth (AOD) over land, both algorithms show a root mean square error (RMSE) of 0.10 (at 550 nm). For single scattering albedo (SSA), both algorithms show a good performance in terms of RMSE (0.04), but RemoTAP has a smaller bias (0.002) compared to GRASP (0.021). For the Ångström exponent (AE), GRASP has a smaller RMSE (0.367) than RemoTAP (0.387), mainly caused by a small overestimate of AE at low values (large particles). Over ocean both algorithms perform very well. For AOD, RemoTAP has an RMSE of 0.057 and GRASP an even smaller RMSE of 0.047. For AE, the RMSEs of RemoTAP and GRASP are 0.285 and 0.224, respectively. Based on the AERONET comparison, we conclude that both algorithms show very similar overall performance, where both algorithms have stronger and weaker points. For the global data products, we find a root mean square difference (RMSD) between RemoTAP and GRASP AOD of 0.12 and 0.038 over land and ocean, respectively. The largest differences occur over the biomass burning region in equatorial Africa. The global mean values are virtually unbiased with respect to each other. For AE the RMSD between RemoTAP and GRASP is 0.33 over land and 0.23 over ocean. For SSA, we find much better agreement over land (bias = - 0.01, RMSD = 0.043 for retrievals with AOD > 0.2) than over ocean (bias = 0.053, RMSD = 0.074). As expected, the differences increase towards low AOD, over both land and ocean. We also compared the GRASP and RemoTAP AOD and AE products against MODIS. For AOD over land, the agreement of either GRASP or RemoTAP with MODIS is worse than the agreement between the two PARASOL algorithms themselves. Over ocean, the agreement is very similar among the three products for AOD. For AE, the agreement between GRASP and RemoTAP is much better than the agreement of both products with MODIS. The agreement of the latest product versions with each other and with AERONET improved significantly compared to the previous version of the global products of GRASP and RemoTAP. The results demonstrate that the dedicated effort in algorithm development for multi-angle polarimetric (MAP) aerosol retrievals still leads to substantial improvement of the resulting aerosol products, and this is still an ongoing process. [ABSTRACT FROM AUTHOR]

This study focuses on comparison of aerosol columnar AOD and Lidar Ratios together with vertical profiles of aerosol extinction and backscatter at 532 nm retrieved over the King Abdullah University of Science and Technology (KAUST) campus observation site for a period of 2019–2022 using GRASP and MPLNET approaches. An emphasis is made on independent analysis of daylight and nighttime retrievals to estimate how strongly the differences in assumptions of both methods made in absence of nighttime AOD observations influence the retrieval results. Additionally, two aerosol products provided by GRASP excluding and including the volume depolarization observations at 532 nm provided by MPLNET are analyzed to estimate the potential benefits of usage of depolarization data in aerosol profile retrievals. In overall, both columnar and vertical MPLNET and GRASP products demonstrated a better agreement for day-time retrievals for the GRASP product excluding the depolarization information. At the same time, inclusion of the volume depolarization observations improved the agreement between MPLNET and GRASP estimated values at nighttime, both columnar and vertical. In addition, estimated values of daytime extinction profiles at a ground level were compared to assess the impact of assumptions of constant aerosol vertical distribution in the cut-off zone of lidar observations implied in GRASP. The values estimated by GRASP demonstrated a good agreement with MPLNET, both for retrievals including and excluding volume depolarization information. A seasonal variability of diurnal cycle of aerosol properties estimated by GRASP over KAUST site for the period 2019–2022 is presented, analyzed and discussed. [ABSTRACT FROM AUTHOR]

Here we retrieve global daily 1 km gapless PM2.5 concentrations via machine learning and big data, revealing its spatiotemporal variability at an exceptionally detailed level everywhere every day from 2017 to 2022, valuable for air quality monitoring, climate change, and public health studies. We find that 96%, 82%, and 53% of Earth's populated areas are exposed to unhealthy air for at least one day, one week, and one month in 2022, respectively. Strong disparities in exposure risks and duration are exhibited between developed and developing countries, urban and rural areas, and different parts of cities. Wave-like dramatic changes in air quality are clearly seen around the world before, during, and after the COVID-19 lockdowns, as is the mortality burden linked to fluctuating air pollution events. Encouragingly, only approximately one-third of all countries return to pre-pandemic pollution levels. Many nature-induced air pollution episodes are also revealed, such as biomass burning. AI-driven daily 1-km gapless PM2.5 data reveal the dynamics of unhealthy air around the world, stark disparities exist between nations and among neighbourhoods. Drastic air quality changes are associated with implementation and lifting of lockdown policies. [ABSTRACT FROM AUTHOR]

In this paper we introduce a spectral surface reflectivity climatology based on observations made by the TROPOMI instrument on board the Sentinel-5P satellite. The database contains the directionally dependent Lambertian-equivalent reflectivity (DLER) of the Earth's surface for 21 wavelength bands ranging from 328nm to 2314nm and for each calendar month. The spatial resolution of the database grid is 0.125° × 0.125°. A recently developed cloud shadow detection technique is implemented to avoid dark scenes due to cloud shadow. In the database, the anisotropy of the surface reflection is described using a third-order parameterisation of the viewing angle dependence. The viewing angle dependence of the DLER is analysed globally and for a selection of surface type regions. The dependence is found to agree with the viewing angle dependence found in the GOME-2 surface DLER database. Differences exist, related to the actual solar position. On average, the viewing angle dependence in TROPOMI DLER is weaker than for GOME-2 DLER, but still important. Validation of the new database was first performed by comparison of the non-directional TROPOMI surface LER with heritage LER databases based on GOME-1, OMI, SCIAMACHY, and GOME-2 data. Agreement was found within 0.002-0.02 in the UV-VIS (below 500nm), up to 0.003 in the NIR (670-772nm), and below 0.001 in the SWIR (2314nm). These performance numbers are dominated by the performance over ocean, but they are in most cases also representative for land surfaces. For the validation of the directional TROPOMI surface DLER we made use of comparison with MODIS surface BRDF for a selection of surface type regions. In all cases the DLER performed significantly better than the traditional LER and we found good agreement with MODIS surface BRDF. The TROPOMI surface DLER database is a clear improvement on previous surface albedo databases and can be used as input not only for satellite retrievals from TROPOMI observations, but also for retrievals from observations from other polarorbiting satellite instruments provided that their equator crossing time is close to that of TROPOMI. The algorithm that is introduced in this paper can be used for the retrieval of surface reflectivity climatologies from other polar satellite missions as well, including OLCI on the Sentinel-3 satellites, Sentinel-5 and 3MI on the MetOp-SG-A1 satellite to be launched in 2025, and the future CO2M mission. [ABSTRACT FROM AUTHOR]