Search

Determining accurate counts and size distributions for biological particles (bioparticles) is crucial in wide-ranging fields, but current methods to this end are susceptible to bias from polydispersity in size. This bias can be mitigated by incorporating a separation step prior to characterization. For this reason, asymmetrical flow field-flow fractionation (AF4) with on-line multiangle light scattering (MALS) has become an important platform for determining particle size. AF4-MALS has also been increasingly used to report particle concentration, particularly for complex biological particles, yet the impact of light scattering models and particle refractive indices (RI) have not been quantitatively evaluated. Here, we develop an analysis workflow using AF4-MALS to simultaneously separate and determine particles sizes and concentrations. The impacts of the MALS particle counting model used to process data and the chosen RI value(s) on particle counts are systematically assessed for polystyrene latex (PSL) particles and bacterial outer membrane vesicles (OMVs) in the 20-500 nm size range. Across spherical models, PSL and OMV particle counts varied up to 13 % or 200 %, respectively. For the coated-sphere model used in the analysis of OMV samples, the sphere RI value greatly impacts particle counts. As the sphere RI value approaches the RI of the suspending medium, the model becomes increasingly sensitive to the light scattering signal-to-noise ratio ultimately causing erroneous particle counts. Overall, this work establishes the importance of selecting appropriate MALS models and RI values for bioparticles to obtain accurate counts and provides an AF4-MALS method to separate, enumerate, and size polydisperse bioparticles., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

Biopharmaceutical process development often involves the use of small-scale bioreactors (SSBR) for optimizing media formulations and process conditions during scale up to commercial scale production. Two key process parameters (CPP) used in SSBR studies are protein titre and viable cell density (VCD). Here, we explore the efficacy of parallel polarized total synchronous fluorescence spectroscopy (TSFS || ) and Synchronous Light Scattering (SyLS || ) to qualitatively monitor these CPPs and quantitatively predict titre and VCD for a large-scale cell culture media optimization SSBR study. The study involved 71 different media formulations (50+ components each), and the bioprocess was run for 13 days or more. Samples were extracted at set times (Day 0, 3, 9, and 13) and clarified by centrifugation. TSFS || spectra showed significant emission changes along with increased light scatter over the course of the bioprocess. SyLS || measurements strongly correlated with particle size data obtained from Dynamic Light Scattering but did not correlate well with VCD probably because of the centrifugation-based sample preparation. Statistical and principal component analysis (PCA) of the pTSFS data showed that spectral variation was greater between media formulations than due to the evolving bioprocess. This prevented the development of accurate global prediction models for media performance (e.g., predicting product titre at day 9 from media spectra measured at day 0). However, classification methods were successfully used to select media subsets with better quantitative prediction accuracy based on spectral similarities. A practical binary (high/low performance) classification model based on Support Vector Machines was generated for media formulation screening. Combining emission and scatter measurements with multivariate data analysis provides a more holistic, multi-attribute bioprocess monitoring method that minimizes the need to use different offline analytical methods. This methodology can be used to monitor process trajectories and deviations, and ultimately be used to predict bioprocess CPPs when implemented on production scale processes where there is much less compositional variation in the media. We believe this SSBR-pTSFS/SyLS approach will provide a valuable resource to develop the design/parameter space for in-process monitoring at production scale from early-stage process/media development studies., Competing Interests: Declaration of Competing Interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests. Alan G. Ryder reports financial support was provided by Science Foundation Ireland. Alan G. Ryder reports equipment, drugs, or supplies was provided by Agilent Technologies (Mulgrave Victoria, Australia). The samples used in this study were provided by a third party Biopharmaceutical manufacturer, who for confidentiality issues do not wish to be identified. This has no bearing on the scientific content of the manuscript. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Aggregation of monoclonal antibodies (mAbs) is the driving force for their undesirable immunogenic effects. There are multiple factors responsible for aggregation in therapeutic proteins. One significant cause is the process-related shear and interfacial stress generated due to impellers and stirrers. This investigation focuses on understanding the possible aggregation arising upon stirring mAb formulations using stirrers made of different materials. We used quantitative laser diffraction (qLD) to monitor and quantify the stirring induced formation of submicron and subvisible aggregates in the size range from 100 nm to 10 µm. We analysed various aspects of aggregate generation, such as onset of aggregation, particle size distribution, and concentration of aggregates generated using stirrers of different materials. We observed that mixing with stainless steel stirrers resulted in a quicker onset of aggregation and led to significantly higher concentrations of aggregates. Analysis of the stirred samples using dynamic light scattering (DLS) and background imaging technique (BMI) were conducted to complement the qLD analysis. All the three techniques resulted in a similar trend, showing presence of larger and higher quantities of aggregates in steel stirred samples, as compared to those stirred using PEEK and glass. Additionally, we performed SEC-HPLC to quantify the soluble fraction of monomer and recorded that the least amount was present in the steel stirred samples. This work highlights the need for optimizing the materials used for fabricating the stirrers/impellers., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Traumatic brain injury (TBI) is a sudden brain injury due to an external force that causes a large number of deaths and permanent disabilities every year. S100B has been recognized as a potential objective quantitative biomarker for screening the prognosis of TBI and severe head injury. In this article, an anti-S100B monoclonal antibody was immobilized on cysteamine (Cy) functionalized gold nanoparticles (AuNPs) by EDC-NHS chemistry, which enabled S100B resonance Rayleigh scattering (RRS) detection based on antibody-labeled gold nanoparticles. The prepared conjugates were characterized by ultraviolet-visible spectroscopy (UV-vis), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), dynamic light scattering (DLS) and sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). Based on the specific binding of the antibody and antigen, the RRS intensities at 381 nm and 541 nm wavelengths were significantly enhanced, and thus a dual wavelength overlapping resonance Rayleigh scattering (DWO-RRS) method was established. The scattering intensity of the two overlapping peaks was proportional to the concentration of S100B in the range of 0.05-4.5 ng mL -1 with a detection limit of 0.002 ng mL -1 . The proposed DWO-RRS method is time-saving, simple, sensitive, and can be used to determine the concentration of S100B in human serum with satisfactory results, which has a promising application in the early diagnosis of TBI.

Purpose: A comparative assessment was performed to evaluate the potential of particle sizing by an ensemble based conventional dynamic light scattering (DLS) technique and an emerging technology based on tunable resistive pulse sensing (TRPS) using particle by particle approach by evaluating three different types of vaccine formulations representing three case studies and showing the limitation of each technique, instrument variability, sensitivity, and the resolution in mixed population., Methods: Three types of in-house vaccine formulations- a protein antigen, an outer membrane vesicle and viral particles were simultaneously evaluated by TRPS based Exoid and two DLS instruments-Zetatrac and Zetasizer for particle size distribution, aggregates, and resolution of polydisperse species., Results: The data from first case study show the risk of possible size overestimation and size averaging in polydisperse samples in DLS measurements which can be addressed by the TRPS analysis. It also shows how TRPS may be utilized only to large size antigens due to its limited size range. The second case study highlights the difference in the sensitivities of two DLS instruments working on the same principle. The third case study show that how TRPS can better resolve the large aggregate species compare to DLS in polydisperse samples., Conclusion: This analysis shows that TRPS can be used as an orthogonal technique in addition to conventional DLS based methods for more precise and in-depth characterization. Both techniques are efficient in size characterization and produce comparable results, however the choice will depend on the type of formulation and size range to be evaluated., (© 2024. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Manganese oxide sols were synthesized using the chemical condensation method by KMnO reduction with polyvinyl alcohol in an aqueous medium. The resulting gels were characterized by the manganese oxide content of 0.07-0.19 wt %, pH 9.5-10.2, and ζ-potential of-(20.3-42.9) mV. Spectrophotometric, turbidimetric, and dynamic light scattering methods were employed to determine how the particle size, ζ-potential, pH, and manganese oxide content in the resulting sols were affected by the KMnO concentration and the KMnO : polyvinyl alcohol ratio. The most stable sols preserved stability for over180 days and remained stable up to 0.5 M KCl, CaCl, and AlCl concentrations. [ABSTRACT FROM AUTHOR]

Spherical gold nanoparticles (GNPs), whose unique properties regarding biomedical applications were broadly investigated, are an object of interest as nanocarriers in drug targeted delivery systems (DTDSs). The possibility of surface functionalization, especially in enabling longer half-life in the bloodstream and enhancing cellular uptake, provides an opportunity to overcome the limitations of popular anticancer drugs (such as cisplatin) that cause severe side effects due to their nonselective transportation. Herein, we present investigations of gold nanoparticle-cisplatin systems formation (regarding reaction kinetics and equilibrium) in which it was proved that the formation efficiency and stability strongly depend on the nanoparticle surface functionalization. In this study, the capillary electrophoresis hyphenated with inductively coupled plasma tandem mass spectrometry (CE-ICP-MS/MS) was used for the first time to monitor gold-drug nanoconjugates formation. The research included optimizing CE separation conditions and determining reaction kinetics using the CE-ICP-MS/MS developed method. To characterize nanocarriers and portray changes in their physicochemical properties induced by the surface's processes, additional hydrodynamic size and ζ-potential by dynamic light scattering (DLS) measurements were carried out. The examinations of three types of functionalized GNPs (GNP-PEG-COOH, GNP-PEG-OCH 3 , and GNP-PEG-biotin) distinguished the essential differences in drug binding efficiency and nanoconjugate stability.

Herein, we reported a new dynamic light scattering (DLS) immunosensing technology for the rapid and sensitive detection of glycoprotein N-terminal pro-brain natriuretic peptide (NT-proBNP). In this design, the boronate affinity recognition based on the interaction of boronic acid ligands and cis-diols was introduced to amplify the nanoparticle aggregation to enable highly sensitive DLS transduction, thereby lowering the limit of detection (LOD) of the methodology. After covalently coupling with antibodies, magnetic nanoparticles (MNPs) were employed as the nanoprobes to selectively capture trace amount of NT-proBNP from complex samples and facilitate DLS signal transduction. Meanwhile, silica nanoparticles modified with phenylboronic acid (SiO 2 @PBA) were designed as the crosslinking agent to bridge the aggregation of MNPs in the presence of target NT-proBNP. Owing to the multivalent and fast affinity recognition between NT-proBNP containing cis-diols and SiO 2 @PBA, the developed DLS immunosensor exhibited charming advantages over traditional immunoassays, including ultrahigh sensitivity with an LOD of 7.4 fg mL -1 , fast response time (< 20 min), and small sample consumption (1 μL). The DLS immunosensor was further characterized with good selectivity, accuracy, precision, reproducibility, and practicability. Collectively, this work demonstrated the promising application of the designed boronate affinity amplified-DLS immunosensor for field or point-of-care testing of cis-diol-containing molecules., (© 2022. The Author(s).)

High molecular weight (Mw) collagen hydrolysates have been demonstrated to produce a higher synthesis of collagen type I mRNA. Mw determination is a key factor maximizing the effect of collagen hydrolysates on collagen type I synthesis by fibroblasts. This work aimed to achieve a high average Mw in Blue Shark Collagen Hydrolysate, studying different hydrolysis parameters by GPC-LS analysis and testing its effect on mRNA Type I collagen expression. Analysis revealed differences in blue shark collagen hydrolysates Mw depending on hydrolysis conditions. Papain leads to obtaining a significantly higher Mw hydrolysate than Alcalase at different times of hydrolysis and at different enzyme/substrate ratios. Besides, the time of the hydrolysis factor is more determinant than the enzyme/substrate ratio factor for obtaining a higher or lower hydrolysate Mw when using Papain as the enzyme. Contrary, Alcalase hydrolysates resulted in similar Mw with no significant differences between different conditions of hydrolysis assayed. Blue shark collagen hydrolysate showing the highest Mw showed neither cytotoxic nor proliferation effect on fibroblast cell culture. Besides, it exhibited an increasing effect on both mRNA expression and pro-collagen I production.

We present a time-resolved analysis of Rayleigh scattering measurements to determine the average size of methane clusters and find the optimum timing for laser-cluster fusion experiments. We measure Rayleigh scattering and determine the average size of methane clusters varying the backing pressure (P0) from 11 bar to 69 bar. Regarding the onset of clustering, we estimate that the average size of methane clusters at the onset of clustering is Nc0≅20 at 11 bar. According to our measurements, the average cluster radius r follows the power law of r∝P01.86. Our ion time-of-flight measurements indicate that we have produced energetic deuterium ions with kT = 52±2 keV after laser-cluster interaction using CD4 gas at 50 bar. We find that this ion temperature agrees with the predicted temperature from CD4 clusters at 50 bar with r = 14 nm assuming the Coulomb explosion model., Competing Interests: The authors have declared that no competing interests exist.

Extracellular vesicles (EVs) are gaining increasing amounts of attention due to their potential use in diagnostics and therapy, but the poor reproducibility of the studies that have been conducted on these structures hinders their breakthrough into routine practice. We believe that a better understanding of EVs stability and methods to control their integrity are the key to resolving this issue. In this work, erythrocyte EVs (hbEVs) were isolated by centrifugation from suspensions of human erythrocytes that had been aged in vitro. The isolate was characterised by scanning (SEM) and cryo-transmission electron microscopy (cryo-TEM), flow cytometry (FCM), dynamic/static light scattering (LS), protein electrophoresis, and UV-V spectrometry. The hbEVs were exposed to various conditions (pH (4-10), osmolarity (50-1000 mOsm/L), temperature (15-60 °C), and surfactant Triton X-100 (10-500 μM)). Their stability was evaluated by LS by considering the hydrodynamic radius ( R h ), intensity of scattered light ( I ), and the shape parameter ( ρ ). The morphology of the hbEVs that had been stored in phosphate-buffered saline with citrate (PBS-citrate) at 4 °C remained consistent for more than 6 months. A change in the media properties (50-1000 mOsm/L, pH 4-10) had no significant effect on the R h (=100-130 nm). At pH values below 6 and above 8, at temperatures above 45 °C, and in the presence of Triton X-100, hbEVs degradation was indicated by a decrease in I of more than 20%. Due to the simple preparation, homogeneous morphology, and stability of hbEVs under a wide range of conditions, they are considered to be a suitable option for EV reference material.

Currently, there is a need to explore the effects of different types of protein-anthocyanin complexations, as well as the possible changes in the nutrition and allergenicity of the formed complexes. Here, we systematically investigated the covalent and non-covalent interactions between cyanidin-3- O -glucoside (C3G) and two major milk proteins, α-casein (α-CN) and β-lactoglobulin (β-LG). Fluorescence quenching data showed that, under non-covalent conditions, C3G quenched the fluorescence of the two proteins via a static process, with the interaction forces being revealed; for covalent products, decreased fluorescence intensities were observed with red shifts in the λ max . Multiple spectroscopic analyses implied that C3G-addition induced protein structural unfolding through transitions between the random coil and ordered secondary components. With a two-stage simulated gastrointestinal (GI) digestion model, it was seen that covalent complexes, not their non-covalent counterparts, showed reduced protein digestibility, ascribed to structural changes resulting in the unavailability of enzyme cleaving sites. The GI digests displayed prominent 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) radical cation-scavenging abilities (3.8-11.1 mM Trolox equivalents per mL digest), in contrast to the markedly reduced 1,1-diphenyl-2-picrylhydrazyl radical-scavenging capacities. Additionally, covalent protein-C3G complexes, but not their non-covalent counterparts, showed lower IgE-binding levels in comparison to the native control. This study provides new understanding for the development of anthocyanin-milk protein systems as functional ingredients with health-beneficial properties.

Polysorbates (PSs, Tweens) are widely used surfactant products consisting of a sorbitan ring connecting up to four ethylene oxide (EO) chains of variable lengths, one or more of which are esterified with fatty acids of variable lengths and saturation degrees. Pharmaceutical applications include the stabilization of biologicals in solutions and the solubilization of poorly water soluble, active ingredients. This study characterizes the complex association behavior of compendial PSs PS20 and PS80, which is fundamentally different from that of single-component surfactants. To this end, a series of demicellization experiments of isothermal titration calorimetry with different PS concentrations are evaluated. Their experiment-dependent heats of titration are converted into a common function of the state of a sample, the micellar enthalpy Q m ( c ). These functions demonstrate that initial micelles are already present at the lowest concentrations investigated, 2 μM for PS20 and 10 μM for PS80. Initial micelles consist primarily of the surfactant species with the lowest individual critical micelle concentration (cmc). With increasing concentration, the other PS species gradually enter these micelles in the sequence of increasing individual cmc's and hydrophilic-lipophilic balance. Concentration ranges with pronounced slopes of Q m ( c ) can be tentatively assigned to the uptake of the major components of the PS products. Micellization and the variation of the micelle properties progress up to at least 10 mM PS. That means the published cmc values or ranges of PS20 and PS80 may be related to certain, major components being incorporated into and forming specific micelles but must not be interpreted in terms of an absence of micelles below and constant properties, e.g., the surface activity, of the micelles above these ranges. The micellization enthalpy curves differ quite substantially between PS20 and PS80 and, in a subtler fashion, between individual quality grades such as high purity, pure lauric acid/pure oleic acid, super-refined, and China grade.

A novel analytical method involving high-performance liquid chromatography with evaporative light scattering detection (HPLC-ELSD) was developed for simultaneous determination of 11 phenolic acids and 12 triterpenes in Sanguisorba officinalis L. Chromatographic separation was conducted with gradient elution mode by using a Diamonsil TM C 18 column (250 mm × 4.6 mm, 5 μm) with the mobile phase of 0.1% acetic acid water (A) and methanol (B). The drift tube temperature of ELSD was set at 70 °C and the nitrogen cumulative flow rate was 1.6 L/min. The method was fully validated to be linear over a wide concentration range ( R 2 ≥ 0.9991). The precisions (RSD) were less than 3.0% and the recoveries were between 97.7% and 101.4% for all compounds. The results indicated that this method is accurate and effective for the determination of 23 functional components in Sanguisorba officinalis L. and could also be successfully applied to study the influence of processing method on those functional components in Sanguisorba officinalis L.

Prion diseases are transmissible neurodegenerative disorders that affect mammals, including humans. The central molecular event is the conversion of cellular prion glycoprotein, PrPC, into a plethora of assemblies, PrPSc, associated with disease. Distinct phenotypes of disease led to the concept of prion strains, which are associated with distinct PrPSc structures. However, the degree to which intra- and inter-strain PrPSc heterogeneity contributes to disease pathogenesis remains unclear. Addressing this question requires the precise isolation and characterization of all PrPSc subpopulations from the prion-infected brains. Until now, this has been challenging. We used asymmetric-flow field-flow fractionation (AF4) to isolate all PrPSc subpopulations from brains of hamsters infected with three prion strains: Hyper (HY) and 263K, which produce almost identical phenotypes, and Drowsy (DY), a strain with a distinct presentation. In-line dynamic and multi-angle light scattering (DLS/MALS) data provided accurate measurements of particle sizes and estimation of the shape and number of PrPSc particles. We found that each strain had a continuum of PrPSc assemblies, with strong correlation between PrPSc quaternary structure and phenotype. HY and 263K were enriched with large, protease-resistant PrPSc aggregates, whereas DY consisted primarily of smaller, more protease-sensitive aggregates. For all strains, a transition from protease-sensitive to protease-resistant PrPSc took place at a hydrodynamic radius (Rh) of 15 nm and was accompanied by a change in glycosylation and seeding activity. Our results show that the combination of AF4 with in-line MALS/DLS is a powerful tool for analyzing PrPSc subpopulations and demonstrate that while PrPSc quaternary structure is a major contributor to PrPSc structural heterogeneity, a fundamental change, likely in secondary/tertiary structure, prevents PrPSc particles from maintaining proteinase K resistance below an Rh of 15 nm, regardless of strain. This results in two biochemically distinctive subpopulations, the proportion, seeding activity, and stability of which correlate with prion strain phenotype., Competing Interests: The authors have declared that no competing interests exist.

For developing a detailed network model of the brain based on image reconstructions, it is necessary to spatially resolve crossing nerve fibers. The accuracy hereby depends on many factors, including the spatial resolution of the imaging technique. 3D Polarized Light Imaging (3D-PLI) allows the three-dimensional reconstruction of nerve fiber tracts in whole brain sections with micrometer in-plane resolution, but leaves uncertainties in pixels containing crossing fibers. Here we introduce Scattered Light Imaging (SLI) to resolve the substructure of nerve fiber crossings. The measurement is performed on the same unstained histological brain sections as in 3D-PLI. By illuminating the brain sections from different angles and measuring the transmitted (scattered) light under normal incidence, light intensity profiles are obtained that are characteristic for the underlying brain tissue structure. We have developed a fully automated evaluation of the intensity profiles, allowing the user to extract various characteristics, like the individual directions of in-plane crossing nerve fibers, for each image pixel at once. We validate the reconstructed nerve fiber directions against results from previous simulation studies, scatterometry measurements, and fiber directions obtained from 3D-PLI. We demonstrate in different brain samples (human optic tracts, vervet monkey brain, rat brain) that the 2D fiber directions can be reliably reconstructed for up to three crossing nerve fiber bundles in each image pixel with an in-plane resolution of up to 6.5 μm. We show that SLI also yields reliable fiber directions in brain regions with low 3D-PLI signals coming from regions with a low density of myelinated nerve fibers or out-of-plane fibers. This makes Scattered Light Imaging a promising new imaging technique, providing crucial information about the organization of crossing nerve fibers in the brain., (Copyright © 2021 The Authors. Published by Elsevier Inc. All rights reserved.)

Super-resolution imaging has been revolutionizing technical analysis in various fields from biological to physical sciences. However, many objects are hidden by strongly scattering media such as biological tissues that scramble light paths, create speckle patterns and hinder object's visualization, let alone super-resolution imaging. Here, we demonstrate non-invasive super-resolution imaging through scattering media based on a stochastic optical scattering localization imaging (SOSLI) technique. After capturing multiple speckle patterns of photo-switchable point sources, our computational approach utilizes the speckle correlation property of scattering media to retrieve an image with a 100-nm resolution, an eight-fold enhancement compared to the diffraction limit. More importantly, we demonstrate our SOSLI to do non-invasive super-resolution imaging through not only static scattering media, but also dynamic scattering media with strong decorrelation such as biological tissues. Our approach paves the way to non-invasively visualize various samples behind scattering media at nanometer levels of detail.

The SARS-CoV-2 pandemic, an ongoing global health crisis, has revealed the need for new technologies that integrate the sensitivity and specificity of RT-PCR tests with a faster time-to-detection. Here, an emulsion loop-mediated isothermal amplification (eLAMP) platform was developed to allow for the compartmentalization of LAMP reactions, leading to faster changes in emulsion characteristics, and thus lowering time-to-detection. Within these droplets, ongoing LAMP reactions lead to adsorption of amplicons to the water-oil interface, causing a decrease in interfacial tension, resulting in smaller emulsion diameters. Changes in emulsion diameter allow for the monitoring of the reaction by use of angle-dependent light scatter (based off Mie scatter theory). Mie scatter simulations confirmed that light scatter intensity is diameter-dependent and smaller colloids have lower intensity values compared to larger colloids. Via spectrophotometers and fiber optic cables placed at 30° and 60°, light scatter intensity was monitored. Scatter intensities collected at 5 min, 30° could statistically differentiate 10, 10 3 , and 10 5 copies/μL initial concentrations compared to NTC. Similarly, 5 min scatter intensities collected at 60° could statistically differentiate 10 5 copies/μL initial concentrations in comparison to NTC. The use of both angles during the eLAMP assay allows for distinction between high and low initial target concentrations. The efficacy of a smartphone-based platform was also tested and had a similar limit of detection and assay time of less than 10 min. Furthermore, fluorescence-labeled primers were used to validate target nucleic acid amplification. Compared to existing LAMP assays for SARS-CoV-2 detection, these times-to-detections are very rapid., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Compared with absorbance, scattering-based dynamic light scattering (DLS) signal has higher sensitivity because its light-scattering intensity is very sensitive to changes in size, thereby enhancing the sensitivity. Herein, we first developed a DLS-enhanced direct competitive enzyme-linked immunosorbent assay (DLS-dcELISA) for ultrasensitive detection of aflatoxin B 1 (AFB 1 ) in corn. By using hydroxyl radical-induced gold nanoparticle (AuNP) aggregation to amplify AuNP scattering signals, the developed DLS-dcELISA exhibited ultrahigh sensitivity for AFB 1 . The detection limit was 0.12 pg mL -1 , which was 153- and 385-fold lower than those obtained using plasmonic and colorimetric dcELISA. In addition, the DLS-dcELISA exhibited excellent selectivity, high accuracy, and strong practicality. Overall, this work presented a simple and universal strategy for improving the sensitivity of traditional ELISA platform only by using the sensitive DLS signals. This technique can replace absorbance-based plasmonic or colored signals as immunoassay signal output for enhanced competitive detection of mycotoxins., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The measurement of physicochemical properties of polydisperse complex biological samples, for example, extracellular vesicles, is critical to assess their quality, for example, resulting from their production and isolation methods. The community is gradually becoming aware of the need to combine multiple orthogonal techniques to perform a robust characterization of complex biological samples. Three pillars of critical quality attribute characterization of EVs are sizing, concentration measurement and phenotyping. The repeatable measurement of vesicle concentration is one of the key-challenges that requires further efforts, in order to obtain comparable results by using different techniques and assure reproducibility. In this study, the performance of measuring the concentration of particles in the size range of 50-300 nm with complementary techniques is thoroughly investigated in a step-by step approach of incremental complexity. The six applied techniques include multi-angle dynamic light scattering (MADLS), asymmetric flow field flow fractionation coupled with multi-angle light scattering (AF4-MALS), centrifugal liquid sedimentation (CLS), nanoparticle tracking analysis (NTA), tunable resistive pulse sensing (TRPS), and high-sensitivity nano flow cytometry (nFCM). To achieve comparability, monomodal samples and complex polystyrene mixtures were used as particles of metrological interest, in order to check the suitability of each technique in the size and concentration range of interest, and to develop reliable post-processing data protocols for the analysis. Subsequent complexity was introduced by testing liposomes as validation of the developed approaches with a known sample of physicochemical properties closer to EVs. Finally, the vesicles in EV containing plasma samples were analysed with all the tested techniques. The results presented here aim to shed some light into the requirements for the complex characterization of biological samples, as this is a critical need for quality assurance by the EV and regulatory community. Such efforts go with the view to contribute to both, set-up reproducible and reliable characterization protocols, and comply with the Minimal Information for Studies of Extracellular Vesicles (MISEV) requirements., Competing Interests: R.V. is a contractor at IZON Science, J.M. and M.M. are employed by IZON Science and their contributions to this paper were made as part of their contract/employment. A.L., B.P., D.A. are employees of NanoFCM and their contributions to this paper were made as part of their employment., (© 2021 The Authors. Journal of Extracellular Vesicles published by Wiley Periodicals, LLC on behalf of the International Society for Extracellular Vesicles.)

Integral membrane proteins are important drug targets that are critical in supporting many biological processes. Despite that, the study of their structure-function relationships remains a major goal in structural biology, yet progress has been hampered by inherent challenges in the production for stable and homogeneous protein samples. Dynamic light scattering provides a straightforward probe of protein quality in solution, particularly in relation to stability and aggregation. However, the necessity to use large amounts of sample and the low-throughput nature of the analysis remain as major bottlenecks of the technique.Here, we present a protocol for dynamic light scattering measurements that are executed in a fully automated fashion for low-volume samples, in situ. The protocol offers a generic pre-screening method for downstream structural studies of biomolecules using higher-resolution approaches such as X-ray crystallography, electron microscopy, small-angle X-ray scattering, and NMR .

Objectives: The objective of our study was to develop an optical method that instantly evaluates the stability of sclerosing foam, which would enable early predictions of the clinical performance of the foam and reduce the occurrence of clinical side effects., Methods: Based on the principle of light scattering, we developed a method to optically test foam stability and verified it experimentally using sodium morrhuate (2 mL; 0.05 g/mL) and carbon dioxide. A self-made foam preparation instrument was used to achieve a preparation speed of 275 mm/s. The liquid-gas ratios were considered as 1:3, 1:4, and 1:5. Curves of illuminance with respect to the drainage rate and decay time were obtained. By fitting the curve, the relationship between foam half-life time (FHT) and foam decay was obtained. Thus, foam stability was evaluated using the initial illuminance value; the foam transfer time was approximately 3 s., Results: The experimental FHT varies between 205 and 232 s. Illuminance is exponentially related to drainage rate and linearly related with time. FHT can be expressed by the initial illuminance and illuminance curve fitting coefficients. The half-life of the foam decreases as the initial illuminance value increases, for the same sclerosing drug. The suitability of foam stability is determined by the position of the initial value in the chart., Conclusion: Optical methods are feasible for evaluating foam stability over a short period of time. Clinically predicting the stability of freshly prepared foam can reduce number of incidences of further complications. This will promote the development of foam sclerotherapy and provide a basic understanding of the internal mechanical properties of foam., (© 2021 S. Karger AG, Basel.)

Scattering techniques represent non-invasive experimental approaches and powerful tools for the investigation of structure and conformation of biomaterial systems in a wide range of distances, ranging from the nanometric to micrometric scale. More specifically, small-angle X-rays and neutron scattering and light scattering techniques represent well-established experimental techniques for the investigation of the structural properties of biomaterials and, through the use of suitable models, they allow to study and mimic various biological systems under physiologically relevant conditions. They provide the ensemble averaged (and then statistically relevant) information under in situ and operando conditions, and represent useful tools complementary to the various traditional imaging techniques that, on the contrary, reveal more local structural information. Together with the classical structure characterization approaches, we introduce the basic concepts that make it possible to examine inter-particles interactions, and to study the growth processes and conformational changes in nanostructures, which have become increasingly relevant for an accurate understanding and prediction of various mechanisms in the fields of biotechnology and nanotechnology. The upgrade of the various scattering techniques, such as the contrast variation or time resolved experiments, offers unique opportunities to study the nano- and mesoscopic structure and their evolution with time in a way not accessible by other techniques. For this reason, highly performant instruments are installed at most of the facility research centers worldwide. These new insights allow to largely ameliorate the control of (chemico-physical and biologic) processes of complex (bio-)materials at the molecular length scales, and open a full potential for the development and engineering of a variety of nano-scale biomaterials for advanced applications., Competing Interests: The authors declare no conflict of interest.

Double hydrophilic block glycopolymers (DHBGs) composed of glycopolymers and polyethylene glycol (PEG) aggregate in aqueous solution. However, there are no guidelines to direct and design DHBG aggregation. Herein, we investigated the effect of the ratio of glycopolymer length to PEG length on the structure, and report that structure size could be influenced by the block polymer ratio. Nine kinds of DHBG with different glycopolymers and PEG lengths were synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization. The aggregation capability of DHBG was investigated by transmission electron microscopy (TEM) and dynamic light scattering (DLS). In all cases, the DHBGs formed the spherical structures, even when the PEG and glycopolymer lengths were quite different. The size of the structure was controlled by the ratio of the PEG length to the glycopolymer length. The aggregation of the DHBGs was induced by hydrogen bonding between the sugar moieties. The aggregation of the DHBG was affected by temperature and concentration.

Amorphous solid dispersions (ASDs), in which polymers are admixed with a drug, retard or inhibit crystallization of the drug, increasing the drug's apparent solubility and oral bioavailability. To date, there are no guidelines regarding how much polymer should be added to stabilize the amorphous form of the drug. We hypothesized that only drug that is not within a "sphere of influence" of a polymer chain is able to nucleate and form crystals and that the degree of crystallization should depend primarily on the ratio C / C *, where C is the polymer concentration and C * is the overlap concentration. We tested this hypothesis by quenching dispersions of polyvinylpyrrolidone (PVP) dissolved in molten felodipine (FEL) or indomethacin (IMC) at four molecular weights of PVP. For each molecular weight of PVP, C * in the drug (as solvent) was determined by dynamic light scattering and intrinsic viscosity. The enthalpy of fusion (Δ H f ), determined by DSC, was used to measure the fraction of drug that crystallized in an ASD. It was found, roughly, that Δ H f /Δ H f, C =0 = f ( C / C *) and that no crystallization occurred when C > C *. XRD also showed that crystallization was completely inhibited up to ∼ T g + 75 °C when the polymer concentration was above C *. Our results suggest that stabilization of amorphous drugs can be achieved by incorporating a polymer just above C *, which is much lower than polymer concentrations customarily used in ASDs. This work reveals the importance of C * in selecting polymer concentrations when formulating drugs as ASDs.

Imidazolium-based ionic liquid functionalized PEGylated mesoporous silica nanoparticles MCM-41 (denoted as [ImIL-PEGylated@MCM-41] NPs) is synthesized and evaluated as an efficient and reliable pH-sensitive nano-carrier for controlled release of cationic Lapatinib (Lap) drug. This nano-DDS was fully characterized by dynamic light scattering, scanning electron microscopy, X-ray powder diffraction, Fourier transform infrared spectroscopy, N 2 adsorption-desorption measurement, and differential scanning calorimeter. Furthermore, the drug loading content and in-vitro drug release profile were studied. The entrapment and loading efficiency of the optimized formulation for Lap were 91 ± 2.0% and 32.21 ± 2.70%, respectively. The results of cytotoxicity assay demonstrated that ImIL-PEG@MCM-41 has no significant toxicity on both cancerous and normal cell lines and the anticancer activity of Lap@ImIL-PEG@MCM-41 was comparable to free drug in case of human breast cells (SKBR3) and human embryonic kidney 293 cells (HEK-293). Meanwhile, three-dimensional (3D) cell culture was performed by multicellular tumor spheroids for understanding of cell response to drugs in physiologically 3D microenvironments. The results of Lap@ImIL-PEG@MCM-41 uptake during 48 hours showed a gradual release of the Lap through the multicellular tumor spheroids. This showed that the pH-responsive controlled release of Lapatinib leads to the satisfactory results in the in vitro breast cancer therapy.

Although a long-chain alkyl group in sulfated oligosaccharides can enhance the anti-HIV activity, the exact mechanism is unclear. To elucidate the role of the long-chain alkyl group, its interaction with a liposome (100 nm) as a HIV model was investigated by surface plasmon resonance and dynamic light scattering. The newly synthesized sulfated 1-(decadecyl-1, 2, 3-triazole)-1-deoxy- maltoheptaoside bearing the long-chain alkyl group was found to interact with the liposome. The particle size increased and the ζ potential was negative, indicating that the sulfated alkyl maltoheptaoside was attached to the liposome by the long-chain alkyl group and the fixed sulfated maltoheptaoside moiety was covered on the liposome. Thus, the long-chain alkyl group penetrates and is fixed into the lipid bilayer of HIV and the sulfated maltoheptaose moiety with negatively charged sulfate groups was electrostatically interacted with HIV gp120 molecule with positively charged amino acids to achieve the inhibition of HIV infection., Competing Interests: Declaration of Competing Interest The authors declare that there are no conflicts of interest., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The absence of clinical tools to evaluate individual variation in the pace of aging represents a major impediment to understanding aging and maximizing health throughout life. The human lens is an ideal tissue for quantitative assessment of molecular aging in vivo. Long-lived proteins in lens fiber cells are expressed during fetal life, do not undergo turnover, accumulate molecular alterations throughout life, and are optically accessible in vivo. We used quasi-elastic light scattering (QLS) to measure age-dependent signals in lenses of healthy human subjects. Age-dependent QLS signal changes detected in vivo recapitulated time-dependent changes in hydrodynamic radius, protein polydispersity, and supramolecular order of human lens proteins during long-term incubation (~1 year) and in response to sustained oxidation (~2.5 months) in vitro. Our findings demonstrate that QLS analysis of human lens proteins provides a practical technique for noninvasive assessment of molecular aging in vivo., (© The Author(s) 2020. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.)

Therapeutic peptides and proteins show enormous potential in the pharmaceutical market, but high costs in discovery and development are limiting factors so far. Single or multiple point mutations are commonly introduced in protein drugs to increase their binding affinity or selectivity. They can also induce adverse properties, which might be overlooked in a functional screen, such as a decreased colloidal or thermal stability, leading to problems in later stages of the development. In this study, we address the effect of point mutations on the stability of the 4.4 kDa antimicrobial peptide plectasin, as a case study. We combined a systematic high-throughput biophysical screen of the peptide thermal and colloidal stability using dynamic light scattering and differential scanning calorimetry with structure-based methods including small-angle X-ray scattering, analytical ultracentrifugation, and nuclear magnetic resonance spectroscopy. Additionally, we applied molecular dynamics simulations to link obtained protein stability parameters to the protein's molecular structure. Despite their predicted structural similarities, all four plectasin variants showed substantially different behavior in solution. We observed an increasing propensity of plectasin to aggregate at a higher pH, and the introduced mutations influenced the type of aggregation. Our strategy for systematically assessing the stability and aggregation of protein drugs is generally applicable and is of particular relevance, given the increasing number of protein drugs in development.

To evaluate real dynamic assessment of tear film optical quality for monitoring and prevention of dry eye.Right eyes of 62 normal and 39 dry eye subjects were included. Dynamic measurement of objective scatter index (OSI) was performed by using the Optical Quality Analysis System II (OQAS II), correlation coefficient between OSI and time (CCOT) was calculated. According to whether the CCOT was significantly ascending, normal and dry eye groups were further subdivided for comparison. By using Scheimpflug-Placido topographer, non-invasive tear break-up time (NITBUT) was recorded, and a 2-dimensional precorneal tear film map was reconstructed and divided into central, middle, and peripheral corneal zones, distribution of tear break-up spots in the 3 corneal zones were analyzed.The numbers of tear break-up spots were higher in all the 3 corneal zones of the dry eye subjects (P < .01), when compared with the normal subjects. The Dry Eye subjects with ascending CCOT had the shortest NITBUT (P < .001-.034) and the most tear break-up spots over the whole cornea (P < .001-.044). Between the dry eye subjects with non-ascending CCOT and those with ascending CCOT, difference of tear break-up spots was found significant only in the peripheral corneal zone (P < .01).Non-ascending and ascending CCOT of dry eye patients reflect different stability of tear film. Real dynamic assessment of tear film optical quality is potential for monitoring and early prevention of dry eye.

A new approach to direct quantitative detection of small molecules (haptens) by dynamic light scattering biosensing is presented. The proposed technique implements a homogeneous competitive immunoassay and is based on optical detection of specific inhibition of nanoparticle aggregation induced by the analyte in a sample. The technique performance was tested both in buffer and milk for detection of chloramphenicol - antibiotic relevant to food safety diagnostics. Good specificity, sensitivity (LOD in milk is 2.4 ng/ml), precision (4.0 ± 1.2%), ruggedness (8.3%), and 96% recovery in conjunction with a record wide dynamic range (3 orders of magnitude) of the nanosensing technique were demonstrated. Such characteristics complemented by the assay simplicity (no washing step) and a short assay time make the approach attractive for application as an analytical platform for point-of-care and field-oriented diagnostics. Graphical abstract.

Chlamydia pneumoniae is a spherical zoonotic pathogen with a diameter of ∼200 nm, which can lead to a wide range of acute and chronic diseases in human body. Early and reliable on-site detection of C. pneumoniae is the key step to control the spread of the pathogen. However, the lack of a current technology with advantages of rapidity, ultrasensitivity, and convenience limits the implementation of traditional techniques for on-site detection of C. pneumoniae . Herein, we developed a naked-eye counting of C. pneumoniae based on the light scattering properties of gold nanoparticle (GNP) under dark-field microscopy (termed "GNP-labeled dark-field counting strategy"). The recognition of single C. pneumoniae by anti- C. pneumoniae antibodies-functionalized GNP probes with size of 15 nm leads to the formation of wreath-like structure due to the strong scattered light resulted from hundreds of GNP probes binding on one C. pneumoniae under dark-field microscopy. Hundreds of GNP probes can bind to the surface of C. pneumoniae due to the high stability and specificity of the nucleic acid immuno-GNP probes, which generates by the hybridization of DNA-modified GNP with DNA-functionalized antibodies. The limit of detection (LOD) of the GNP-labeled dark-field counting strategy for C. pneumoniae detection in spiked samples or real samples is down to four C. pneumoniae per microliter, which is about 4 times more sensitive than that of quantitative polymerase chain reaction (qPCR). Together with the advantages of the strong light scattering characteristic of aggregated GNPs under dark-field microscopy and the specific identification of functionalized GNP probes, we can detect C. pneumoniae in less than 30 min using a cheap and portable microscope even if the sample contains only a few targets of interest and other species at high concentration. The GNP-labeled dark-field counting strategy meets the demands of rapid detection, low cost, easy to operate, and on-site detection, which paves the way for early and on-site detection of infectious pathogens.

In this study, we report how similarly two serum albumins (bovine serum albumin (BSA) and human serum albumin (HSA)) respond in the presence of different concentration of aromatic amino acid based ionic liquids (AAILs), which are cholinium tryptophan [CHO][Trp]IL and tetraethylammonium tryptophan [TEA][Trp]IL. Extended results of thermodynamic stability indicate the extent to which both serum albumins differ in their thermal stability despite having structural similarity in presence of AAILs. To efficiently quantify the results, biomolecular interactions studies were carried out between serum albumins and AAILs with the help of differential scanning calorimetry (DSC), dynamic light scattering (DLS) and various spectroscopic techniques. DSC results illustrated that both AAILs are increasing the thermal stability of BSA and HSA, as per transition temperature (T m ) values, BSA (65.51 to 72.46 °C) and HSA (65.46 to 75.97 °C) have more thermal stability in the presence of [CHO][Trp]IL as compare to [TEA][Trp]IL, BSA (65.51 to 69.75 °C) and HSA (65.46 to 72.08 °C). Secondary structure results obtained using Dichroweb software and selcon calculations. Furthermore, to illustrate the specific binding of AAIL's cations or anions with the binding sites of BSA and HSA, the molecular docking studies were also performed using Molegro trail version v 6.0., Competing Interests: Declaration of competing interest The authors declare no competing financial interest., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Nanoemulsions are very interesting systems as they offer capacity to encapsulate both hydrophilic and lipophilic molecules in a single particle, as well as the controlled release of chemical moieties initially entrapped in the internal droplets. In this study, we propose a new two-step modified ultrasound-assisted phase inversion approaches-phase inversion temperature (PIT) and self-emulsification, to prepare stable o/w nanoemulsions from a fully water-dilutable microemulsion template for the transdermal delivery of loratadine (a hydrophobe and as Ostwald ripening inhibitor). Firstly, the primary water-in-oil microemulsion concentrate (w/o) was formed using loratadine in the oil phase (oleic acid or coconut oil) and Tween 80 in the aqueous phase and by adjusting the PIT around 85 °C followed by stepwise dilution with water at 25 °C to initiate the formation the nanoemulsions (o/w). To assure the long-term stability, a brief application of low frequency ultrasound was employed. Combining the two low energy methods resulted in nanoemulsions prepared by mixing constant surfactant/oil ratios above the PIT with varying water volume fraction (self-emulsification) during the PIT by stepwise dilution. The kinetic stability was evaluated by measuring the droplet size with time by dynamic light scattering (DLS). The droplet size ranged 15-43 nm and did not exceed 100 nm over the period of 6 months indicating the system had high kinetic stability. Cryo-TEM showed that the nanoemulsions droplets were monodispersed and approaching micellar structure and scale. All nanoemulsions had loratadine crystals formed within 20 days after preparation, which tended to sediment during storage. Nanoemulsions improved the in vitro permeation of loratadine through porcine skin up to 20 times compared to the saturated solution., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2019 Elsevier B.V. All rights reserved.)

We show ionically cross-linked, temperature-responsive reversible or irreversible hydrogels of anionic cellulose nanocrystals (CNCs) and methacrylate terpolymers by mixing them homogeneously in the initially charge-neutral state of the polymer, which was subsequently switched to be cationic by cleaving side groups by UV irradiation. The polymer is a random terpolymer poly(di(ethylene glycol) methyl ether methacrylate)- rnd -poly(oligo(ethylene glycol) methyl ether methacrylate)- rnd -poly(2-((2-nitrobenzyl)oxycarbonyl)aminoethyl methacrylate), that is, PDEGMA- rnd -POEGMA- rnd -PNBOCAEMA. The PDEGMA and POEGMA repeating units lead to a lower critical solution temperature (LCST) behavior. Initially, homogeneous aqueous mixtures are obtained with CNCs, and no gelation is observed even upon heating to 60 °C. However, upon UV irradiation, the NBOCAEMAs are transformed to cationic 2-aminoethyl methacrylate (AEMA) groups, as 2-nitrobenzaldehyde moieties are cleaved. The resulting mixtures of anionic CNC and cationic PDEGMA- rnd -POEGMA- rnd -PAEMA show gelation for sufficiently high polymer fractions upon heating to 60 °C due to the interplay of ionic interactions and LCST. For short heating times, the gelation is thermoreversible, whereas for long enough heating times, irreversible gels can be obtained, indicating importance of kinetic aspects. The ionic nature of the cross-linking is directly shown by adding NaCl, which leads to gel melting. In conclusion, the optical triggering of the polymer ionic interactions in combination with its LCST phase behavior allows a new way for ionic nanocellulose hydrogel assemblies.

Increasing prevalence of protein misfolding disorders urges the search for effective therapies. Although several antiaggregation molecules have been identified, their molecular process of aggregation and clinical trials are underway. The present study is focused on the mechanism through which phenyl butyrate (PB), a chemical chaperone, triggers inhibition of human serum albumin (HSA) fibrillation. Turbidity and Rayleigh light scattering (RLS) measurements reveal the marked presence of aggregates in HSA that were confirmed as amyloid fibrils by thioflavin T (ThT) and Congo red (CR) and were subsequently inhibited by PB in a dose dependent manner. ThT fluorescence kinetics reveals a decrease in the apparent rate constant, K app , in the presence of PB without triggering a lag phase in HSA suggesting PB's interference with the elongation phase. Dynamic light scattering (DLS) results display a reduction in the aggregate size in the presence of PB. Isothermal titration calorimetry (ITC) data reveals strong binding of PB at site II both at 25 °C ( K b ≈ 1.94 × 10 5 M -1 ) and 65 °C ( K b ≈ 2.90 × 10 4 M -1 ), mediated by hydrogen bonding. Overall, our finding establishes that PB stabilizes partially unfolded HSA molecules through hydrogen bonding, thereby preventing establishment of hydrogen bonds between them and hindering their progression into amyloid fibrils. This is in contrast to its chaperone effect manifested with other proteins.

Econazole nitrate (ECN) is a weakly basic drug with very low aqueous solubility that hampers its permeation through biological membranes and results in low ECN bioavailability. Formation of drug/cyclodextrin (drug/CD) inclusion complexes is a formulation technology that can be applied to enhance drug solubility in aqueous media. The aim of this study was to determine the effect of CD complexation and pH adjustments on the ECN solubility. The ECN pH-solubility and ECN/CD phase-solubility profiles were determined. The solubility of ECN in aqueous acidic solutions containing α-cyclodextrin (αCD) was relatively high and much higher than in aqueous γ-cyclodextrin (γCD) solutions under same conditions. The complexation efficiency of the ECN/CD complex was relatively low for the unionized drug. Formation of ECN/CD inclusion complex was verified by proton nuclear magnetic resonance spectroscopy. Formation of ECN/CD complexes enhanced the drug stability during autoclaving. γCD complexes self-assembled to form nano- and microparticles whereas αCD complexes had negligible tendency to self-assemble. Formation of CD complex nano- and microparticles was investigated by dynamic light scattering and by drug permeation through semipermeable membranes of different molecular weight cut-off. The largest aggregate fraction was observed for the unionized ECN in aqueous pH 7.5 solution containing high CD concentration, that is 10% (w/v) CD. It was shown that in acidic solutions ECN/αCD can enhance the antifungal activity to filamentous fungi. This was associated with the increased ECN solubility and increase of readily available ECN molecules in aqueous αCD solutions., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Doxorubicin liposomal formulations were characterized for the particle size distribution and size-based distribution of lipids and doxorubicin (DOX). An asymmetric flow-field flow fractionation (AF4) method was developed and employed for size-based fractionation of the doxorubicin liposomal formulations. Liposome size-fractions collected from AF4 were analyzed for particle size using nanoparticle tracking analysis (NTA) and dynamic light scattering (DLS). Three doxorubicin liposomal formulations (DLFs) were compared for liposome size distributions. We did not observe any statistically significant variation in D10, D50 and D90 value of size distributions of three fomulations. Lipids and DOX compositions in liposomal fractions from AF4 were determined using liquid chromatography-mass spectrometry (LC-MS) method. The lipid compositions are close to be constant as a function of liposomal size. The drug to lipid ratio was close to be constant for all the size fractions suggesting drug loading may be proportional to membrane surface area of liposomes as membrane surface area is proportional to the amount of lipid in a given liposome. This analytical method could be used in liposomal based drug development as a tool for comparison of generic versions against the reference standard drug., (Published by Elsevier B.V.)

Dynamic light scattering (DLS) is a common method for characterizing the size distribution of polymers, proteins, and other nano- and microparticles. Modern instrumentation permits measurement of particle size as a function of time and/or temperature, but currently there is no simple method for performing DLS particle size distribution measurements in the presence of applied voltage. The ability to perform such measurements would be useful in the development of electroactive, stimuli-responsive polymers for applications such as sensing, soft robotics, and energy storage. Here, a technique using applied voltage coupled with DLS and a temperature ramp to observe changes in aggregation and particle size in thermoresponsive polymers with and without electroactive monomers is presented. The changes in aggregation behavior observed in these experiments were only possible through the combined application of voltage and temperature control. To obtain these results, a potentiostat was connected to a modified cuvette in order to apply voltage to a solution. Changes in polymer particle size were monitored using DLS in the presence of constant voltage. Simultaneously, current data were produced, which could be compared with particle size data, to understand the relationship between current and particle behavior. The polymer poly(N-isopropylacrylamide) (pNIPAM) served as a test polymer for this technique, as pNIPAM's response to temperature is well-studied. Changes in the lower-critical solution temperature (LCST) aggregation behavior of pNIPAM and poly(N-isopropylacrylamide)-block-poly(ferrocenylmethyl methacrylate), an electrochemically active block-copolymer, in the presence of applied voltage are observed. Understanding the mechanisms behind such changes will be important when trying to achieve reversible polymer structures in the presence of applied voltage.

Nuclear magnetic resonance (NMR) titration and isothermal titration calorimetry can be combined to provide an assessment of how multivalent intrinsically disordered protein (IDP) interactions can involve enthalpy-entropy balance. Here, we describe the underlying technical details and additional methods, such as dynamic light scattering analysis, needed to assess these reactions. We apply this to a central interaction involving the disordered regions of phe-gly nucleoporins (FG-Nups) that contain multiple phenylalanine-glycine repeats which are of particular interest, as their interactions with nuclear transport factors (NTRs) underlie the paradoxically rapid yet also highly selective transport of macromolecules mediated by the nuclear pore complex (NPC). These analyses revealed that a combination of low per-FG motif affinity and the enthalpy-entropy balance prevents high-avidity interaction between FG-Nups and NTRs while the large number of FG motifs promotes frequent FG-NTR contacts, resulting in enhanced selectivity.

Dynamic light scattering (DLS), transmission electron microscopy (TEM), and reversed phase-high performance liquid chromatography (RP-HPLC) are staples of nanoparticle characterization for size distribution, shape/morphology, and composition, respectively. These techniques are simple and provide important details on sample characteristics. However, DLS and TEM are routinely done in batch-mode, while RP-HPLC affords separation of components within the entire sample population, regardless of sample polydispersity. While batch-mode analysis is informative and should be a first-step analysis for any material, it may not be ideal for polydisperse formulations, such as many nanomedicines. Herein, we describe the utility of asymmetric flow field-flow fractionation (AF4) as a useful tool for a more thorough understanding of these inherently polydisperse materials. AF4 was coupled with in-line DLS for an enhanced separation and resolution of various size populations in a nanomaterial. Additionally, the various size populations were collected for offline analysis by TEM for an assessment of different shape populations, or RP-HPLC to provide a compositional analysis of each individual size population. This technique was also extended to assess nanoparticle stability, i.e., drug release, both in buffer and physiologically relevant matrix, as well as qualitatively evaluate the protein binding capacity of nanomedicines. Overall, AF4 is proven to be a very versatile technique and can provide a wealth of information on a material's polydispersity and stability. Moreover, the ability to conduct analysis in physiological matrices provides an advantage that many other routine analytical techniques do not. Graphical Abstract.

Background: Perfluorocarbon-nanoemulsions (PFC-NE) made of PFC and phospholipids (PL) by homogenization are optimal for in vivo- 19 F labelling of monocytes and subsequently of inflamed tissues in magnetic resonance imaging (MRI). Necessary requirements for in vivo use of PFC-NE are sterility, suitable droplet sizes and the absence of immune activating liposomes, which are a typical byproduct of the homogenization process., Methods and Results: To meet these requirements, we developed an aseptic in-vial preparation technique for PFC-NE based on dual centrifugation (DC) by testing different PFC/phospholipid ratios as well as the application of additives. Two different PFC, perfluorooctylbromide (PFOB) and perfluoro-15-crown-5-ether (PFCE), were investigated. Particle sizes were assessed by dynamic light scattering and NE morphology by cryoTEM. DC homogenization was optimal when using an excess of PL (8.7 % (m/m) of utilized PFC, z-ave: 180 nm, pdi: 0.2). A purification approach by centrifugation was implemented to remove liposomes formed from the excess of PL during homogenization. The purification success was proven by phospholipid assay and PFC quantification via density and sound velocity measurements., Conclusion: DC in combination with a short centrifugation is a fast and reliable way of small-scale aseptic PFC-NE production for 19 F MRI passive-targeting experiments of monocytes and inflamed tissues., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Deposition kinetics of fibrinogen/polystyrene particle complexes on mica and the silicon/silica substrates was studied using the direct optical and atomic force microscopy. Initially, basic physicochemical characteristics of fibrinogen and the microparticles were acquired using the dynamic light scattering and the electrophoretic mobility methods, whereas the zeta potential of the substrates was determined using the streaming potential measurements. Subsequently an efficient method for the preparation of fibrinogen/polymer microparticle complexes characterized by controlled coverage and molecule orientation was developed. It was demonstrated that for a lower suspension concentration the complexes are stable for pH range 3-9 and for a large concentration for pH below 4.5 and above 5.5. This enabled to carry out thorough pH cycling experiments where their isoelectric point was determined to appear at pH 5. Kinetic measurements showed that the deposition rate of the complexes vanished at pH above 5, whereas the kinetics of the positively charged amidine particles, used as control, remained at maximum for pH up to 9. These results were theoretically interpreted using the hybrid random sequential adsorption model. It was confirmed that the deposition kinetics of the complexes can be adequately analyzed in terms of the mean-field approach, analogously to the ordinary colloid particle behavior. This is in contrast to the fibrinogen molecule behavior, which efficiently adsorb on negatively charged substrates for the entire range pHs up to 9.7. These results have practical significance for conducting efficient immunoassays governed by the specific antigen/antibody interactions., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The polymeric mucin MUC5B provides the structural and functional framework of respiratory mucus, conferring both viscoelastic and antimicrobial properties onto this vital protective barrier. Whilst it is established that MUC5B forms disulfide-linked linear polymers, how this relates to their packaging in secretory granules, and their molecular form in mucus remain to be fully elucidated. Moreover, the role of the central heavily O-glycosylated mucin domains in MUC5B conformation is incompletely described. Here we have completed a detailed structural analysis on native MUC5B polymers purified from saliva and subsequently investigated how MUC5B conformation is affected by changes in calcium concentration and pH, factors important for mucin intragranular packaging and post-secretory expansion. The results identify that MUC5B has a beaded structure repeating along the polymer axis and suggest that these repeating motifs arise from distinct glycosylation patterns. Moreover, we demonstrate that the conformation of these highly entangled linear polymers is sensitive to calcium concentration and changes in pH. In the presence of calcium (Ca 2+ , 10 mM) at pH 5.0, MUC5B adopted a compact conformation which was lost either upon removal of calcium with EGTA, or by increasing the pH to 7.4. These results suggest a pathway of mucin collapse to enable intracellular packaging and mechanisms driving mucin expansion following secretion. They also point to the importance of the tight control of calcium and pH during different stages of mucin biosynthesis and secretion, and in the generation of correct mucus barrier properties.

Background: A bacteremia diagnosis with speeded-up identification and antimicrobial susceptibility testing (AST) is mandatory to adjust empirical broad-spectrum antibiotherapy and avoid the emergence of multi-resistant bacteria. Alfred 60 AST (Alifax, Polverara, PD, Italy) is an innovative automated system based on light scattering measurements allowing direct AST from positive blood cultures with rapid results. In this study we aimed to evaluate the system's performances and turnaround time (TAT) compared to routine AST., Methods: The study was conducted during 2 non-consecutive 3-month periods at the microbiology laboratory of the Cliniques universitaires Saint-Luc. All blood cultures detected positive in the 0 AM-10 AM time frame with a pure Gram-positive cocci or Gram-negative bacilli stain were included for Alfred 60 AST testing. Two customized EUCAST antibiotic panels were set up composed of 1) a "Gram-negative" panel including cefuroxime, ceftazidime Enterobacteriaceae, piperacillin-tazobactam Enterobacteriaceae, ciprofloxacine, and ceftazidime Pseudomonas 2) a "Gram-positive" panel including cefoxitin Staphylococcus aureus, cefoxitin coagulase-negative (CNS) Staphylococci and ampicillin Enterococci. Categorical agreement (CA), very major errors (VME), major errors (ME), minor errors (mE) and TAT to Alfred 60 AST results were calculated in comparison with AST results obtained from direct testing on positive blood cultures with the Phoenix system (Becton Dickinson, Franklin Lakes, NJ, USA)., Results: Five hundred seventy and one hundred nine antibiotics were evaluated on respectively 166 Gram-negative bacilli and 109 Gram-positive cocci included in the studied population. During the first study period regarding Gram-negative strains a CA of 89.5% was obtained with a high rate of VME (19 and 15.4% respectively) for cefuroxime and piperacillin-tazobactam Enterobacteriaceae. Considering this, Alifax reviewed these antibiotics' formulations improving Gram-negative bacilli total CA to 92.2% with no VME during the second study period. For Gram-positive cocci, total CA was 88.1% with 2.3% VME, 13.8% ME (mainly cefoxitin CNS) and 12% mE rates both study periods combined. Median TAT to AST results was 5 h with Alfred versus 12 h34 with Phoenix., Conclusion: The Alfred 60 AST system shows correct yet improvable microbiological performances and a major TAT reduction compared to direct automated AST testing. Clinical studies measuring the impact of the approach on antibiotic management of patients with bacteremia are recommended.

We introduce a portable system for clinical studies based on time-domain diffuse correlation spectroscopy (DCS). After evaluating different lasers and detectors, the final system is based on a pulsed laser with about 550 ps pulsewidth, a coherence length of 38 mm, and two types of single-photon avalanche diodes (SPAD). The higher efficiency of the red-enhanced SPAD maximizes detection of the collected light, increasing the signal-to-noise ratio, while the better timing response of the CMOS SPAD optimizes the selection of late photons and increases spatial resolution. We discuss component selection and performance, and we present a full characterization of the system, measurement stability, a phantom-based validation study, and preliminary in vivo results collected from the forearms and the foreheads of four healthy subjects. With this system, we are able to resolve blood flow changes 1 cm below the skin surface with improved depth sensitivity and spatial resolution with respect to continuous wave DCS.

A biotesting procedure that makes it possible to record the changes in the intensities of elastic light scattering, light absorption, and intrinsic photofluorescence of the protein component, as well as the determination of the concentration and structuring coefficients of the genomic component, of the samples with viable unicellular test organisms incubated in a liquid nutrient medium in the presence and absence of various external chemical factors, is described. The results of the analysis of the antibiotic activity of various metal cations with the use of this technique are presented. This technique is much more rapid, objective, and comprehensive for the assessment of the effect on the reproduction rate, metabolic activity, and genome structure of the test organisms from the samples of various products, wastes, etc. than standard visual microbiotesting methods.

The success of reef-building corals for >200 million years has been dependent on the mutualistic interaction between the coral host and its photosynthetic endosymbiont dinoflagellates (family Symbiodiniaceae) that supply the coral host with nutrients and energy for growth and calcification. While multiple light scattering in coral tissue and skeleton significantly enhance the light microenvironment for Symbiodiniaceae, the mechanisms of light propagation in tissue and skeleton remain largely unknown due to a lack of technologies to measure the intrinsic optical properties of both compartments in live corals. Here we introduce ISOCT (inverse spectroscopic optical coherence tomography), a non-invasive approach to measure optical properties and three-dimensional morphology of living corals at micron- and nano-length scales, respectively, which are involved in the control of light propagation. ISOCT enables measurements of optical properties in the visible range and thus allows for characterization of the density of light harvesting pigments in coral. We used ISOCT to characterize the optical scattering coefficient (μ s ) of the coral skeleton and chlorophyll a concentration of live coral tissue. ISOCT further characterized the overall micro- and nano-morphology of live tissue by measuring differences in the sub-micron spatial mass density distribution (D) that vary throughout the tissue and skeleton and give rise to light scattering, and this enabled estimates of the spatial directionality of light scattering, i.e., the anisotropy coefficient, g. Thus, ISOCT enables imaging of coral nanoscale structures and allows for quantifying light scattering and pigment absorption in live corals. ISOCT could thus be developed into an important tool for rapid, non-invasive monitoring of coral health, growth and photophysiology with unprecedented spatial resolution.

The interaction between pancreatic proteases and a serine protease inhibitor purified from potato tubers was investigated by chromatography-coupled light scattering measurements. The molar mass distribution in the chromatogram was compared to theoretical values calculated for the different possible combinations of complexes and free components by three different approaches, namely section analyses of the chromatograms, full mass average determination and mass distribution analysis. This revealed that the inhibitor was able to bind trypsin in a 2:1 complex, whereas the data for chymotrypsin clearly showed a limitation to 1:1 complex regardless of the molar ratio in the injected samples. The same experiment carried out with elastase and the potato inhibitor gave only weak indications of complex formation under the conditions used., (Copyright © 2019 Elsevier Inc. All rights reserved.)

Purpose: To evaluate the performance of the Uro4 HB&L™ system in screening ESBL/AmpC-producing Enterobacteriaceae as compared with the resistant test by VITEK 2. The resistance profile of the ESBL-producing bacteria was also evaluated., Methodology: Blood culture samples were collected at bedside, inoculated directly into BD BACTEC™ culture bottles, and incubated. When microbial growth was found, samples were prepared for identification using MALDI-ToF. The Uro4 HB&L™ system was used for direct detection of ESBL/AmpC-producing bacteria compared with conventional methods., Results: A total of 103 positive blood cultures containing Gram-negative bacteria were tested. Uro4™ HB&L screening results were obtained in up to 6.5 h, with 91.3% concordance with the VITEK2 system, with 85% sensitivity, 95.2% specificity, and 91.1% positive and 90.9% negative predictive values. The resistance profile of ESBL-producing bacteria tested in the present study showed increased resistance ratio to ciprofloxacin, gentamicin, and trimethoprim/sulfamethoxazole. In parallel, susceptibility to amikacin and meropenem was not affected., Conclusions: The performance of the Uro4 HB&L™ system is acceptable for rapid screening ESBL/AmpC-producing Enterobacteriaceae. The data related to detecting ESBL-producing bacteria are crucial for managing antimicrobial therapy.