Search

Automatic image processing methods are a prerequisite to efficiently analyze the large amount of image data produced by computed tomography (CT) scanners during cardiac exams. This paper introduces a model-based approach for the fully automatic segmentation of the whole heart (four chambers, myocardium, and great vessels) from 3-D CT images. Model adaptation is done by progressively increasing the degrees-of-freedom of the allowed deformations. This improves convergence as well as segmentation accuracy. The heart is first localized in the image using a 3-D implementation of the generalized Hough transform. Pose misalignment is corrected by matching the model to the image making use of a global similarity transformation. The complex initialization of the multicompartment mesh is then addressed by assigning an affine transformation to each anatomical region of the model. Finally, a deformable adaptation is performed to accurately match the boundaries of the patient's anatomy. A mean surface-to-surface error of 0.82 mm was measured in a leave-one-out quantitative validation carried out on 28 images. Moreover, the piecewise affine transformation introduced for mesh initialization and adaptation shows better interphase and interpatient shape variability characterization than commonly used principal component analysis. Index Terms--Active shape models, computed tomography, deformable models, Hough transform, model-based segmentation, shape modeling, three-dimensional (3-D) cardiac segmentation.

Since the introduction of 3-D rotational X-ray imaging, protocols for 3-D rotational coronary artery imaging have become widely available in routine clinical practice. Intra-procedural cardiac imaging in a computed tomography (CT)-like fashion has been particularly compelling due to the reduction of clinical overhead and ability to characterize anatomy at the time of intervention. We previously introduced a clinically feasible approach for imaging the left atrium and pulmonary veins (LAPVs) with short contrast bolus injections and scan times of ∼4-10 s. The resulting data have sufficient image quality for intra-procedural use during electro-anatomic mapping (EAM) and interventional guidance in atrial fibrillation (AF) ablation procedures. In this paper, we present a novel technique to intra-procedural surface generation which integrates fully-automated segmentation of the LAPVs for guidance in AF ablation interventions. Contrast-enhanced rotational X-ray angiography (3-D RA) acquisitions in combination with filtered-back-projection-based reconstruction allows for volumetric interrogation of APV anatomy in near-real-time. An automatic model-based segmentation algorithm allows for fast and accurate LAPV nesh generation despite the challenges posed by image quality; relative to pre-procedural cardiac CT/MR, 3-D RA images suffer from more artifacts and reduced signal-to-noise. We validate our integrated method by comparing 1) automatic and manual segmentations of intra-procedural 3-D RA data, 2) automatic segmentations of intra-procedural 3-D RA and pre-procedural CT/MR data, and 3) intra-procedural EAM point cloud data with automatic segmentations of 3-D RA and CT/MR data. Our validation results for automatically segmented intra-procedural 3-D RA data show average segmentation errors of 1) ∼ 1.3mm compared with manual 3-D RA segmentations 2) ∼2.3mm compared with automatic segmentation of pre-procedural CT/MR data and 3) ∼ 2.1mm compared with registered intra-procedural EAM point clouds. The overall experiments indicate that LAPV surfaces can be automatically segmented intra-procedurally from 3-D RA data with comparable quality relative to meshes derived from pre-procedural CT/MR. [ABSTRACT FROM AUTHOR]

In image-guided cardiac interventions, X-ray imaging and intravascular ultrasound (IVUS) imaging are two often used modalities. Interventional X-ray images, including angiography and fluoroscopy, are used to assess the lumen of the coronary arteries and to monitor devices in real time. IVUS provides rich intravascular information, such as vessel wall composition, plaque, and stent expansions, but lacks spatial orientations. Since the two imaging modalities are complementary to each other, it is highly desirable to co-register the two modalities to provide a comprehensive picture of the coronaries for interventional cardiologists. In this paper, we present a solution for co-registering 2-D angiography and IVUS through image-based device tracking. The presented framework includes learning-based vessel detection and device detections, model-based tracking, and geodesic distance-based registration. The system first interactively detects the coronary branch under investigation in a reference angiography image. During the pullback of the IVUS transducers, the system acquires both ECG-triggered fluoroscopy and IVUS images, and automatically tracks the position of the medical devices in fluoroscopy. The localization of tracked IVUS transducers and guiding catheter tips is used to associate an IVUS imaging plane to a corresponding location on the vessel branch under investigation. The presented image-based solution can be conveniently integrated into existing cardiology workflow. The system is validated with a set of clinical cases, and achieves good accuracy and robustness.