Search

Silicon nitride (SiN) coatings may reduce unwanted release of metal ions from metallic implants. However, as SiN slowly dissolves in aqueous solutions, additives that reduce this dissolution rate would likely increase the lifetime and functionality of implants. Adding iron (Fe) and carbon (C) permits tuning of the SiN coatings’ mechanical properties, but their effect on SiN dissolution rates, and their capacity to reduce metal ion release from metallic implant substrates, have yet to be investigated. Such coatings have recently been proposed for use in spinal implants; therefore, it is relevant to assess their impact on the viability of cells expected at the implant site, such as microglia, the resident macrophages of the central nervous system (CNS). To study the effects of Fe and C on the dissolution rate of SiN coatings, compositional gradients of Si, Fe and C in combination with N were generated by physical vapor deposition onto CoCrMo discs. Differences in composition did not affect the surface roughness or the release of Si, Fe or Co ions (the latter from the CoCrMo substrate). Adding Fe and C reduced ion release compared to a SiN reference coating, which was attributed to altered reactivity due to an increase in the fraction of stabilizing Si–C or Fe–C bonds. Extracts from the SiN coatings containing Fe and C were compatible with microglial viability in 2D cultures and 3D collagen hydrogels, to a similar degree as CoCrMo and SiN coated CoCrMo reference extracts. As Fe and C reduced the dissolution rate of SiN-coatings and did not compromise microglial viability, the capacity of these additives to extend the lifetime and functionality of SiN-coated metallic implants warrants further investigation.

Silicon nitride (SiN) coatings may reduce unwanted release of metal ions from metallic implants. However, as SiN slowly dissolves in aqueous solutions, additives that reduce this dissolution rate would likely increase the lifetime and functionality of implants. Adding iron (Fe) and carbon (C) permits tuning of the SiN coatings’ mechanical properties, but their effect on SiN dissolution rates, and their capacity to reduce metal ion release from metallic implant substrates, have yet to be investigated. Such coatings have recently been proposed for use in spinal implants; therefore, it is relevant to assess their impact on the viability of cells expected at the implant site, such as microglia, the resident macrophages of the central nervous system (CNS). To study the effects of Fe and C on the dissolution rate of SiN coatings, compositional gradients of Si, Fe and C in combination with N were generated by physical vapor deposition onto CoCrMo discs. Differences in composition did not affect the surface roughness or the release of Si, Fe or Co ions (the latter from the CoCrMo substrate). Adding Fe and C reduced ion release compared to a SiN reference coating, which was attributed to altered reactivity due to an increase in the fraction of stabilizing Si–C or Fe–C bonds. Extracts from the SiN coatings containing Fe and C were compatible with microglial viability in 2D cultures and 3D collagen hydrogels, to a similar degree as CoCrMo and SiN coated CoCrMo reference extracts. As Fe and C reduced the dissolution rate of SiN-coatings and did not compromise microglial viability, the capacity of these additives to extend the lifetime and functionality of SiN-coated metallic implants warrants further investigation.

INTRODUCTION: Wear and corrosion may lead to a release of particles and ions from spinal implants, which is a concern because of their potentially detrimental effect on the life span of the implant [1]. Silicon nitride-based coatings have been suggested as an option to reduce the release of metal ions from an implant. In addition, any particles produced will slowly dissolve, releasing only biocompatible ions [2]. It is of high interest to reduce the dissolution rate of the coating to ensure an adequate lifetime [3]. The present study aimed to assess the effect of Fe and C additions to silicon nitride coatings in terms of dissolution rate as well as the impact of the released ions on the in vitro neural cell response. METHODS: Using a combinatorial approach, SiFeCN coatings were deposited on CoCr disc substrates by reactive sputtering in an in-house built equipment. The coatings were characterized in 9 points using x-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). The dissolution behaviour was evaluated by exposing the coated samples to cell media for 14 days. The obtained extracts were used to measure ion release with inductively coupled plasma - optical emission spectrometry (ICP-OES) and to assess cell viability of microglia (C8-B4 cell line) using the MTT assay. RESULTS: The XPS results showed compositional gradients of Si ranging from 35.0 to 47.3 at.%, Fe from 1.4 to 9.3 at.% and C from 4.5 to 13.9 at.%. SEM of focused ion beam (FIB) cross-sections revealed coating thicknesses between 427-534 nm. SEM of the coating after exposure showed substantial signs of dissolution with visibly increased porosity for the SiN coating, while the SiFeCN coatings appeared less affected. SiFeCN coatings appeared more affected by dissolution for increasing Si contents. The estimated dissolution rate of the SiN coating was 8.3 nm/day, while the rate of SiFeCN coatings was 5.2-6.8 nm/day. The ICP results showed a reduction in Co ions from the substrate

Silicon nitride (SiN) coatings may reduce unwanted release of metal ions from metallic implants. However, as SiN slowly dissolves in aqueous solutions, additives that reduce this dissolution rate would likely increase the lifetime and functionality of implants. Adding iron (Fe) and carbon (C) permits tuning of the SiN coatings’ mechanical properties, but their effect on SiN dissolution rates, and their capacity to reduce metal ion release from metallic implant substrates, have yet to be investigated. Such coatings have recently been proposed for use in spinal implants; therefore, it is relevant to assess their impact on the viability of cells expected at the implant site, such as microglia, the resident macrophages of the central nervous system (CNS). To study the effects of Fe and C on the dissolution rate of SiN coatings, compositional gradients of Si, Fe and C in combination with N were generated by physical vapor deposition onto CoCrMo discs. Differences in composition did not affect the surface roughness or the release of Si, Fe or Co ions (the latter from the CoCrMo substrate). Adding Fe and C reduced ion release compared to a SiN reference coating, which was attributed to altered reactivity due to an increase in the fraction of stabilizing Si–C or Fe–C bonds. Extracts from the SiN coatings containing Fe and C were compatible with microglial viability in 2D cultures and 3D collagen hydrogels, to a similar degree as CoCrMo and SiN coated CoCrMo reference extracts. As Fe and C reduced the dissolution rate of SiN-coatings and did not compromise microglial viability, the capacity of these additives to extend the lifetime and functionality of SiN-coated metallic implants warrants further investigation.

Spinal implants have been used for decades to treat different spinal conditions. However, certain implant-related complications have been attributed to the release of particles and ions due to corrosion and wear triggering local immune responses including the release of pro-inflammatory cytokines, leading to local inflammation. The impact of these particles and ions on cells from the central nervous system (CNS) remains largely unknown, with few studies examining the effects on glial cells1. Indeed, the particles may migrate to adjacent nervous tissues and increasing our knowledge of the glial cell response is essential since they play a crucial role in maintaining tissue homeostasis and protecting the CNS. Most prior studies have used traditional 2D culture models; however, these lack the 3D spatial arrangement of cells found in tissues where they form important interactions with the extracellular matrix. The aim of this study was to employ an open source bioprinter2 to extrude hydrogels containing glial cells into which experimental implant debris can be introduced, enabling monitoring of cell viability and inflammatory responses by fluorescence microscopy. We have previously established that mono-cultures of microglia and astrocytes can be 3D cultured in collagen hydrogels, and their viability monitored using the caspase-3/7 apoptosis reporter and propidium iodide labelling for cell death. Applying a bioprinting strategy to produce these glial-laden constructs increases the reproducibility of these models, and allows the study of a wide range of types and concentrations of particles, resulting in a valuable tool to increase the knowledge about the biological response generated by particles from spinal implants.

Silicon nitride (SiN) coatings may reduce unwanted release of metal ions from metallic implants. However, as SiN slowly dissolves in aqueous solutions, additives that reduce this dissolution rate would likely increase the lifetime and functionality of implants. Adding iron (Fe) and carbon (C) permits tuning of the SiN coatings’ mechanical properties, but their effect on SiN dissolution rates, and their capacity to reduce metal ion release from metallic implant substrates, have yet to be investigated. Such coatings have recently been proposed for use in spinal implants; therefore, it is relevant to assess their impact on the viability of cells expected at the implant site, such as microglia, the resident macrophages of the central nervous system (CNS). To study the effects of Fe and C on the dissolution rate of SiN coatings, compositional gradients of Si, Fe and C in combination with N were generated by physical vapor deposition onto CoCrMo discs. Differences in composition did not affect the surface roughness or the release of Si, Fe or Co ions (the latter from the CoCrMo substrate). Adding Fe and C reduced ion release compared to a SiN reference coating, which was attributed to altered reactivity due to an increase in the fraction of stabilizing Si–C or Fe–C bonds. Extracts from the SiN coatings containing Fe and C were compatible with microglial viability in 2D cultures and 3D collagen hydrogels, to a similar degree as CoCrMo and SiN coated CoCrMo reference extracts. As Fe and C reduced the dissolution rate of SiN-coatings and did not compromise microglial viability, the capacity of these additives to extend the lifetime and functionality of SiN-coated metallic implants warrants further investigation.

Silicon nitride (SiN) coatings may reduce unwanted release of metal ions from metallic implants. However, as SiN slowly dissolves in aqueous solutions, additives that reduce this dissolution rate would likely increase the lifetime and functionality of implants. Adding iron (Fe) and carbon (C) permits tuning of the SiN coatings’ mechanical properties, but their effect on SiN dissolution rates, and their capacity to reduce metal ion release from metallic implant substrates, have yet to be investigated. Such coatings have recently been proposed for use in spinal implants; therefore, it is relevant to assess their impact on the viability of cells expected at the implant site, such as microglia, the resident macrophages of the central nervous system (CNS). To study the effects of Fe and C on the dissolution rate of SiN coatings, compositional gradients of Si, Fe and C in combination with N were generated by physical vapor deposition onto CoCrMo discs. Differences in composition did not affect the surface roughness or the release of Si, Fe or Co ions (the latter from the CoCrMo substrate). Adding Fe and C reduced ion release compared to a SiN reference coating, which was attributed to altered reactivity due to an increase in the fraction of stabilizing Si–C or Fe–C bonds. Extracts from the SiN coatings containing Fe and C were compatible with microglial viability in 2D cultures and 3D collagen hydrogels, to a similar degree as CoCrMo and SiN coated CoCrMo reference extracts. As Fe and C reduced the dissolution rate of SiN-coatings and did not compromise microglial viability, the capacity of these additives to extend the lifetime and functionality of SiN-coated metallic implants warrants further investigation.

INTRODUCTION One of the main limiting factors to the life span of spinal implants is the release of detrimental ions and particles, which are typically produced by wear and corrosion1,2. One suggested approach to overcome these issues is the use of silicon nitride-based coatings on metallic implants because of their low wear rates and their ability to slowly dissolve in aqueous solutions into biocompatible ions only, which could be advantageous in terms of limiting the effects of wear debris and ion release3. A previous study found that alloying the silicon nitride coating with Fe and C did not have a negative effect on mechanical properties nor biocompatibility in a direct contact in vitro test4. However, the dissolution behaviour of the coatings remains to be investigated. Furthermore, due to the close proximity to nerve tissues in spinal implants, the effect of the ions released on the neural tissue is a concern. The present study aimed to study the dissolution behaviour and in vitro neural cell response of SiFeCN coatings. A combinatorial approach was used for efficient screening of different compositions. EXPERIMENTAL METHODS SiFeCN coatings were deposited on CoCr disc substrates by reactive sputtering in an in-house built equipment, allowing for combinatorial processes, using Si, Fe and C solid targets. Nitrogen was supplied as a reactive gas. The coatings were characterized in 9 points using x-ray photoelectron spectroscopy (XPS), vertical scanning interferometry (VSI) and scanning electron microscopy (SEM). The points were placed in a 3x3 grid with 22.5 mm between each point. The dissolution behaviour was evaluated by exposing the coated samples to cell media for 14 days. The obtained extracts were diluted (1:32, 1:48, 1:64 and 1:80 dilution) and used to measure ion levels with inductively coupled plasma (ICP-OES) and to assess indirect biocompatibility in vitro using the MTT assay and glial cells. RESULTS AND DISCUSSION The XPS results showed composit

Spinal implants have been used for several decades to relieve pain and stabilise the spine, however an increase in the life span of implants is required due to younger and more active patients requiring spinal surgery. Silicon nitride-based coatings have been suggested as an alternative to metallic implants to reduce the release of detrimental ion and particles. However, due to the coating’s dissolution in the presence of water, reducing the dissolution rate by altering the coating composition is of high interest to ensure an adequate lifetime. The aim of this study was to investigate the dissolution rate of silicon nitride coatings containing Fe and C and the effect of the ions released on in vitro neural cell response. SiFeCN coatings were deposited by reactive sputtering using a combinatorial approach for efficient testing of different compositions. Compositional gradients were obtained for the investigated elements. SEM of the coated samples after exposure to cell media displayed stronger signs of dissolution on the SiN reference than the alloyed coatings. The addition of Fe and C decreased the ion release of the coating itself compared to the SiN coating. Indirect biocompatibility tests suggested that microglial cell viability was comparable to that of CoCrMo reference samples and SiN coatings. In conclusion, the results indicate the possibility of decreasing the dissolution rate of SiN coatings by the addition of Fe and C, while maintaining the biocompatibility as confirmed by the cytotoxicity tests on neural cells. Therefore, SiFeCN coatings merit further investigation for use in spinal implants. This project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No 812765 and from the European Union’s Seventh Framework Programme (FP7/2007-2013), grant agreement GA-310477(LifeLongJoints).

Ceramic coatings have been widely investigated as a means to reduce wear and metallic ion release from joint implants. Silicon nitride-based coatings have been a topic of interest specifically due to their solubility in aqueous solutions. This could imply a reduced adverse immune response since the generated debris would dissolve. However, there are concerns regarding the dissolution rate and adhesion of these silicon nitride-based coatings. This study attempts to address the concern of dissolution rate as well as coating adhesion of silicon nitride coatings. We hypothesized that alloying with chromium and niobium would affect the adhesion, dissolution rate, and the resulting ion release and cell response to the coatings. A combinatorial approach was used to deposit sputtered coatings with compositional gradients both with and without a CrN interlayer. Compositional gradients were achieved for all the investigated elements: Si (38.6-46.9 at%), Nb (2.2-4.6 at%) and Cr (1.9-6.0 at%). However, while the presence of an interlayer reduced the delamination during adhesion testing, the differences in composition in the top coating did not affect the adhesion. Nor did the top coating's composition affect the surface roughness or the coatings' inherent mechanical properties (elastic modulus and hardness). All coating compositions were associated with a low Co release from the underlying metal and points with a higher Cr content (4.3-6.0 at%) gave an overall lower release of Si, Cr and Nb ions, possibly due to the formation of a stable oxide, which reduced the dissolution rate of the coating. Optimum chromium contents were furthermore found to give an enhanced in vitro fibroblast cell viability. In conclusion, the results indicate a possibility to tailor the ion release rate, which lends promise to further investigations such as tribocorrosive tests towards a future biomedical application.

Ceramic coatings have been widely investigated as a means to reduce wear and metallic ion release from joint implants. Silicon nitride-based coatings have been a topic of interest specifically due to their solubility in aqueous solutions. This could imply a reduced adverse immune response since the generated debris would dissolve. However, there are concerns regarding the dissolution rate and adhesion of these silicon nitride-based coatings. This study attempts to address the concern of dissolution rate as well as coating adhesion of silicon nitride coatings. We hypothesized that alloying with chromium and niobium would affect the adhesion, dissolution rate, and the resulting ion release and cell response to the coatings. A combinatorial approach was used to deposit sputtered coatings with compositional gradients both with and without a CrN interlayer. Compositional gradients were achieved for all the investigated elements: Si (38.6-46.9 at%), Nb (2.2-4.6 at%) and Cr (1.9-6.0 at%). However, while the presence of an interlayer reduced the delamination during adhesion testing, the differences in composition in the top coating did not affect the adhesion. Nor did the top coating's composition affect the surface roughness or the coatings' inherent mechanical properties (elastic modulus and hardness). All coating compositions were associated with a low Co release from the underlying metal and points with a higher Cr content (4.3-6.0 at%) gave an overall lower release of Si, Cr and Nb ions, possibly due to the formation of a stable oxide, which reduced the dissolution rate of the coating. Optimum chromium contents were furthermore found to give an enhanced in vitro fibroblast cell viability. In conclusion, the results indicate a possibility to tailor the ion release rate, which lends promise to further investigations such as tribocorrosive tests towards a future biomedical application.

Ceramic coatings have been widely investigated as a means to reduce wear and metallic ion release from joint implants. Silicon nitride-based coatings have been a topic of interest specifically due to their solubility in aqueous solutions. This could imply a reduced adverse immune response since the generated debris would dissolve. However, there are concerns regarding the dissolution rate and adhesion of these silicon nitride-based coatings. This study attempts to address the concern of dissolution rate as well as coating adhesion of silicon nitride coatings. We hypothesized that alloying with chromium and niobium would affect the adhesion, dissolution rate, and the resulting ion release and cell response to the coatings. A combinatorial approach was used to deposit sputtered coatings with compositional gradients both with and without a CrN interlayer. Compositional gradients were achieved for all the investigated elements: Si (38.6-46.9 at%), Nb (2.2-4.6 at%) and Cr (1.9-6.0 at%). However, while the presence of an interlayer reduced the delamination during adhesion testing, the differences in composition in the top coating did not affect the adhesion. Nor did the top coating's composition affect the surface roughness or the coatings' inherent mechanical properties (elastic modulus and hardness). All coating compositions were associated with a low Co release from the underlying metal and points with a higher Cr content (4.3-6.0 at%) gave an overall lower release of Si, Cr and Nb ions, possibly due to the formation of a stable oxide, which reduced the dissolution rate of the coating. Optimum chromium contents were furthermore found to give an enhanced in vitro fibroblast cell viability. In conclusion, the results indicate a possibility to tailor the ion release rate, which lends promise to further investigations such as tribocorrosive tests towards a future biomedical application.

Ceramic coatings have been widely investigated as a means to reduce wear and metallic ion release from joint implants. Silicon nitride-based coatings have been a topic of interest specifically due to their solubility in aqueous solutions. This could imply a reduced adverse immune response since the generated debris would dissolve. However, there are concerns regarding the dissolution rate and adhesion of these silicon nitride-based coatings. This study attempts to address the concern of dissolution rate as well as coating adhesion of silicon nitride coatings. We hypothesized that alloying with chromium and niobium would affect the adhesion, dissolution rate, and the resulting ion release and cell response to the coatings. A combinatorial approach was used to deposit sputtered coatings with compositional gradients both with and without a CrN interlayer. Compositional gradients were achieved for all the investigated elements: Si (38.6-46.9 at%), Nb (2.2-4.6 at%) and Cr (1.9-6.0 at%). However, while the presence of an interlayer reduced the delamination during adhesion testing, the differences in composition in the top coating did not affect the adhesion. Nor did the top coating's composition affect the surface roughness or the coatings' inherent mechanical properties (elastic modulus and hardness). All coating compositions were associated with a low Co release from the underlying metal and points with a higher Cr content (4.3-6.0 at%) gave an overall lower release of Si, Cr and Nb ions, possibly due to the formation of a stable oxide, which reduced the dissolution rate of the coating. Optimum chromium contents were furthermore found to give an enhanced in vitro fibroblast cell viability. In conclusion, the results indicate a possibility to tailor the ion release rate, which lends promise to further investigations such as tribocorrosive tests towards a future biomedical application.

Ceramic coatings have been widely investigated as a means to reduce wear and metallic ion release from joint implants. Silicon nitride-based coatings have been a topic of interest specifically due to their solubility in aqueous solutions. This could imply a reduced adverse immune response since the generated debris would dissolve. However, there are concerns regarding the dissolution rate and adhesion of these silicon nitride-based coatings. This study attempts to address the concern of dissolution rate as well as coating adhesion of silicon nitride coatings. We hypothesized that alloying with chromium and niobium would affect the adhesion, dissolution rate, and the resulting ion release and cell response to the coatings. A combinatorial approach was used to deposit sputtered coatings with compositional gradients both with and without a CrN interlayer. Compositional gradients were achieved for all the investigated elements: Si (38.6-46.9 at%), Nb (2.2-4.6 at%) and Cr (1.9-6.0 at%). However, while the presence of an interlayer reduced the delamination during adhesion testing, the differences in composition in the top coating did not affect the adhesion. Nor did the top coating's composition affect the surface roughness or the coatings' inherent mechanical properties (elastic modulus and hardness). All coating compositions were associated with a low Co release from the underlying metal and points with a higher Cr content (4.3-6.0 at%) gave an overall lower release of Si, Cr and Nb ions, possibly due to the formation of a stable oxide, which reduced the dissolution rate of the coating. Optimum chromium contents were furthermore found to give an enhanced in vitro fibroblast cell viability. In conclusion, the results indicate a possibility to tailor the ion release rate, which lends promise to further investigations such as tribocorrosive tests towards a future biomedical application.

Hip and knee joint replacements have been some of the most successful surgeries for the treatment of patients with chronic pain due to arthritis. A current challenge is however the younger and more active patients, which demands longer-lasting devices that will withstand several decades of cyclic loading. Corrosion and wear products are herein a concern since they can cause localized inflammation leading to periprosthetic bone loss and potentially implant loosening, necessitating revision surgery. One approach to overcome the long-term issues is to develop materials more resistant to wear and corrosion, as well as materials giving less of an inflammatory response, e.g. by depositing a ceramic coating which acts as a barrier to the release of metal ions from the substrate as well as improving the wear resistance. Silicon nitride is a promising candidate because of its low wear rates and the possibility to limit the adverse effects of wear debris due to its slow dissolution in aqueous solutions. Purpose of the study This study aimed to investigate the dissolution and biocompatibility of SiCrNbN coatings deposited on cobalt chromium (CoCr) substrates. We hypothesized that the ceramic coating will reduce metal ion release compared to uncoated CoCr without affecting its biocompatibility. MethodsThe SiCrNbN coatings were deposited on CoCr disc substrates by reactive sputtering in an in-house built equipment, allowing for combinatorial processes, using Si, Cr and Nb solid targets. Nitrogen was supplied as a reactive gas. To improve the adhesion of the coating a CrN interlayer was deposited. The coatings were characterized in 9 points using x-ray photoelectron spectroscopy (XPS), vertical scanning interferometry (VSI) and scanning electron microscopy (SEM). The points were placed in a 3x3 grid with 22.5 mm between each point. The dissolution was evaluated by exposing the coated samples to cell media for 7 days. The obtained extracts were diluted (neat extracts (1:1), and 3

Ceramic coatings have been widely investigated as a means to reduce wear and metallic ion release from joint implants. Silicon nitride-based coatings have been a topic of interest specifically due to their solubility in aqueous solutions. This could imply a reduced adverse immune response since the generated debris would dissolve. However, there are concerns regarding the dissolution rate and adhesion of these silicon nitride-based coatings. This study attempts to address the concern of dissolution rate as well as coating adhesion of silicon nitride coatings. We hypothesized that alloying with chromium and niobium would affect the adhesion, dissolution rate, and the resulting ion release and cell response to the coatings. A combinatorial approach was used to deposit sputtered coatings with compositional gradients both with and without a CrN interlayer. Compositional gradients were achieved for all the investigated elements: Si (38.6-46.9 at.%), Nb (2.2-4.6 at.%) and Cr (1.9-6.0 at.%). However, while the presence of an interlayer reduced the delamination during adhesion testing, the differences in composition in the top coating did not affect the adhesion. Nor did the top coating’s composition affect the surface roughness or the coatings’ inherent mechanical properties (elastic modulus and hardness). All coating compositions were associated with a low Co release from the underlying metal and points with a higher Cr content (4.3-6.0 at.%) gave an overall lower release of Si, Cr and Nb ions, possibly due to the formation of a stable oxide, which reduced the dissolution rate of the coating. Optimum chromium contents were furthermore found to give an enhanced in vitro fibroblast cell response. In conclusion, the results indicate a possibility to tailor the ion release rate, which lends promise to further investigations such as tribocorrosive tests towards a future biomedical application.

Silicon nitride-based coatings have been suggested as an alternative for metallic implants in tribological applications as a means to reduce the release of metal ions and debris. However, as silicon nitride is known to slowly dissolve in the presence of water there is a need to quantify and possibly reduce the dissolution rate of the coatings. A previous study found that alloying the silicon nitride coating with Fe and C in order to tune the hardness and elastic modulus did not have a negative effect on surface roughness, the amorphous microstructure nor biocompatibility. However, the ability of the coating to reduce ion release from the substrate as well as the dissolution properties of the coating itself remain to be investigated. Therefore, the aim of this study was to investigate the metal ion release and the dissolution rate of coatings containing Fe and C. A combinatorial approach was used for efficient screening of different compositions. Compositional gradients of Si ranging from 36.4 at.% to 47.3 at.%, Fe from 1.4 at.% to 9.3 at.% and C from 4.5 at.% to 13.9 at.% were obtained. Differences in composition did not affect the surface roughness nor the release of Si, Fe or Co ions. Nonetheless, the addition of Fe and C reduced the ion release compared to a silicon nitride reference coating without alloying elements. The introduction of Fe and C might increase the fraction of Si-C or Si-Fe bonds, and thereby reduce the dissolution rate. Preliminary biocompatibility tests showed a fibroblast viability that was comparable to or higher than the uncoated Si substrate. The possibility to tune the dissolution rate is promising and could benefit coating performance in the intended application, as confirmed by the cytotoxicity tests.