Search

Semiconductor nanowires (NWs) capped with metal nanoparticles (NPs) show multifunctional and synergistic properties, which are important for applications in the fields of catalysis, photonics, and electronics. Conventional colloidal syntheses of this class of hybrid structures require complex sequential seeded growth, where each section requires its own set of growth conditions, and methods for preparing such wires are not universal. Here, we report a new and general method for synthesizing metal-semiconductor nanohybrids based on particle catalysts, prepared by scanning probe block copolymer lithography, and chemical vapor deposition. In this process, metallic heterodimer NPs were used as catalysts for NW growth to form semiconductor NWs capped with metallic particles (Au, Ag, Co, Ni). Interestingly, the growth processes for NWs on NPs are regioselective and controlled by the chemical composition of the metallic heterodimer used. Using a systematic experimental approach, paired with density functional theory calculations, we were able to postulate three different growth modes, one without precedent.

Multimetallic heterostructured nanoparticles with high-index facets potentially represent an important class of highly efficient catalysts. However, due to their complexity, they are often difficult to synthesize. Herein, a library of heterostructured, multimetallic (Pt, Pd, Rh, and Au) tetrahexahedral nanoparticles was synthesized through alloying/dealloying with Bi in a tube furnace at 900-1000 °C. Electron microscopy and selected area diffraction measurements show that the domains of the heterostructured nanoparticles are epitaxially aligned. Although nanoparticles formed from Au alone exhibit low-index facets, Pt and Au form PtAu heterostructured nanoparticles with high-index facets, including domains that are primarily made of Au. Furthermore, the alloying/dealloying of Bi occurs at different rates and under different conditions within the heterostructured nanoparticles. This influences the types of architectures observed en route to the final high-index state, a phenomenon clearly observable in the case of PdRhAu nanoparticles. Finally, scanning probe block copolymer lithography was used in combination with this synthetic strategy to control nanoparticle composition in the context of PtAu nanoparticles (1:4 to 4:1 ratio range) and size (15 to 45 nm range).

Patterning nanoscale features across macroscopic areas is challenging due to the vast range of length scales that must be addressed. With polymer pen lithography, arrays of thousands of elastomeric pyramidal pens can be used to write features across centimeter-scales, but deformation of the soft pens limits resolution and minimum feature pitch, especially with polymeric inks. Here, we show that by coating polymer pen arrays with a ∼175 nm silica layer, the resulting hard transparent arrays exhibit a force-independent contact area that improves their patterning capability by reducing the minimum feature size (∼40 nm), minimum feature pitch (200 nm for polymers), and pen to pen variation. With these new arrays, patterns with as many as 5.9 billion features in a 14.5 cm(2) area were written using a four hundred thousand pyramid pen array. Furthermore, a new method is demonstrated for patterning macroscopic feature size gradients that vary in feature diameter by a factor of 4. Ultimately, this form of polymer pen lithography allows for patterning with the resolution of dip-pen nanolithography across centimeter scales using simple and inexpensive pen arrays. The high resolution and density afforded by this technique position it as a broad-based discovery tool for the field of nanocombinatorics.

Realizing nanostructured interfaces with precise architectural control enables one to access properties unattainable using bulk materials. In particular, a nanostructured interface (e.g., a core–shell nanowire) between two semiconductors leads to a short charge separation distance, such that photoexcited charge carriers can be more quickly and efficiently collected. While vapor-phase growth methods are used to synthesize uniform core–shell nanowire arrays of semiconductors such as Si and InP, more general strategies are required to produce related structures composed of a broader range of materials. Herein, we employ anodic aluminum oxide templates to synthesize CH3NH3PbI3 perovskite core–copper thiocyanate shell nanowire arrays employing a combination of electrodeposition and solution casting methods. Using scanning electron microscopy, powder X-ray diffraction, and time-resolved photoluminescence spectroscopy, we confirm the target structure and show that adopting a core–shell nanowire architecture acce...

The interactions between nanoparticles and solvents play a critical role in the formation of complex, metastable nanostructures. However, direct observation of such interactions with high spatial and temporal resolution is challenging with conventional liquid-cell transmission electron microscopy (TEM) experiments. Here, a windowless system consisting of polymer nanoreactors deposited via scanning probe block copolymer lithography (SPBCL) on an amorphous carbon film is used to investigate the coarsening of ultrafine (1-3 nm) Au-Pt bimetallic nanoparticles as a function of solvent evaporation. In such reactors, homogeneous Au-Pt nanoparticles are synthesized from metal ion precursors in situ under electron irradiation. The non-uniform evaporation of the thin polymer film not only concentrates the nanoparticles, but also accelerates the coalescence kinetics at the receding polymer edges. Qualitative analysis of the particle forces influencing coalescence suggests that capillary dragging by the polymer edges plays a significant role in accelerating this process. Taken together, this work: 1) provides fundamental insight into the role of solvents in the chemistry and coarsening behavior of nanoparticles during the synthesis of polyelemental nanostructures, 2) provides insight into how particles form via the SPBCL process, and 3) shows how SPBCL-generated domes, instead of liquid cells, can be used to study nanoparticle formation. More generally, it shows why conventional models of particle coarsening, which do not take into account solvent evaporation, cannot be used to describe what is occurring in thin film, liquid-based syntheses of nanostructures., Comment: 27 pages, 6 figures. Accepted for publication in JACS

In most midwestern states water availability is rarely an issue, because there are many lakes and rivers from which to extract water. However, there are areas in the world and even in the United States in which water is not readily available. As the world’s population grows and developing nations realize higher standards of living, the amount of water needed will rise. One important use of water is in manufacturing. There are three scopes for water use in manufacturing: direct use in the process (scope 1), through the energy used to perform the process (scope 2), and the water used during manufacturing to create the materials that are consumed (scope 3). One of the most common metals used in manufacturing is steel. This study breaks down the production of steel, from iron ore to raw steel, to quantify a total water footprint. Each step considers scopes 1, 2, and 3. The water used to create one kilogram of steel included 12.8 liters of water for scope 1, 0.2790 liters of water for scope 2, and 692.1 liters of water for scope 3. The process that was responsible for the largest portion of water use was the production of coke. Coke processing (scope 3) uses 98% of the total water needed and should receive the greatest attention in efforts to reduce water use in steel production.