Search

Widespread adoption of residential heat pumps is predicted to create challenges for national and local electricity systems. Flexible operation of heat pumps could help smooth peak demand and better utilise renewables. Achieving these benefits involves many stakeholders from the heat pump and electricity sectors with different perspectives and expectations. This work brought together 52 experts from different parts of the UK system to discuss and debate the role of heat pump flexibility in a decarbonised electricity system in 2035. A co-production research model was adopted, designed to integrate diverse forms of knowledge and perspectives in the co-production of knowledge on heat pump flexibility. A series of participatory activities were undertaken including a one-day workshop. Elements of a common vision emerged, such as the anticipated widespread flexible operation of heat pumps as the cheapest way of running a heat pump and the likelihood of a highly automated and remote-controlled manner of operation. Disagreements and unknowns also emerged. This work aims to support stakeholders in planning for the social, technical and economic aspects of flexible heat pump operation in their own organisations. [ABSTRACT FROM AUTHOR]

The UK's Air Tightness Testing and Measurement Association competent persons scheme collects pressure test data and metadata from the majority of new build dwellings in the UK. This article uses the dataset to investigate the importance of the ventilation strategy in airtightness design and construction. Design and measured airtightness were tested for association with declared ventilation strategy. It was found that ventilation strategy makes a statistically significant difference to airtightness; however, this difference is too small to be practically relevant. Properties with mechanical ventilation and heat recovery (MVHR) were shown to have a mean designed air permeability only 0.46 m3/m2h lower than naturally ventilated dwellings. Seventy-three per cent of homes with MVHR have design airtightness greater than or equal to 5 m3/m2h and 17% of naturally ventilated dwellings have design airtightness less than 5 m3/m2h. We discuss how current design is not maximising the CO2, cost and air quality benefit of each ventilation strategy. A new approach to regulatory compliance is proposed, which explicitly links the designed airtightness and chosen ventilation system. It is suggested that compliance could then be achieved using a set of airtightness ranges linked to appropriate ventilation strategies. This could be expected to result in reduced energy consumption and carbon emissions for new build homes compared to the current approach and would also potentially lead to better outcomes for occupants in terms of indoor air quality.Practical application: Analysis of a large database of the airtightness of new UK dwellings found that ventilation strategy makes very little difference to airtightness design. For dwellings with MVHR, the results suggest that infiltration levels are too high to maximise the energy savings; for naturally ventilated homes, there may be air quality issues. Coupling airtightness design and ventilation strategy can reduce a dwelling's energy demand and can support achieving the required energy performance rating. [ABSTRACT FROM AUTHOR]

Residential space and water heating account for 23% of UK final energy demand and combination gas boilers are the dominant technology. Performance gap issues in gas boiler systems have been reported, with previous studies unable to isolate or quantify root causes for performance issues, hampered by indirect and coarse measurement methods. Utilising high-frequency data, through state-of-the-art boiler diagnostics from 221 UK combination boilers, assumptions in efficiency standards are challenged. Total heating energy consumption and number of hot water tappings are in line with national expectations but the observed cycling behaviour of boilers gives cause for concern due to links with lower performance and higher emissions. Most combi-boilers appear oversized for space heating and despite available modulation are unable to prevent rapid on–off cycling. Per day, half of combi boilers studied average more than 50 starts and 70% of starts average less than 10 min during space heating operation. Cycling contradicts assumptions in efficiency testing standards, which assume steady state operation, weighted by full and part power measurements. Addressing oversizing and excessive boiler cycling provides an opportunity to quickly and significantly reduce emissions associated with heating, at low cost through the ongoing replacement of millions of boilers.Practical application: Lessons learned from this research regarding the detrimental performance issues seen in gas combi boilers are directly applicable to the topics of boiler specification for building service engineers and installers, such as guidelines in CIBSE Guide A,1 CE54 Whole house boiler sizing method2 and legislation set out in BoilerPlus from the Department of Business, Energy and Industrial Strategy. Plant size ratio, radiator hydraulic layout and controls can all contribute to the rapid cycling seen in the data and can all be influenced by building service professionals. Boiler modulation range is also crucial and manufacturers need to be aware of the benefits of extending modulation in new products. [ABSTRACT FROM AUTHOR]