Search

Synthesis of pure, homogeneous, and reproducible materials is key for the comprehensive understanding, design, and tailoring of material properties. In this study, we focus on the synthesis of ZrV2O7, a material known for its negative thermal expansion properties. We investigate the influence of solid-state and wet chemistry synthesis methods on the purity and homogeneity of ZrV2O7 samples. Our findings indicate that different synthesis methods significantly impact the material's characteristics. The solid-state reaction provided high-purity material through extended milling time and repeated calcination cycles, while the sol–gel reaction enabled a "near-atomic" level of mixing, and therefore, homogenous phase-pure ZrV2O7. We confirmed purity via X-ray diffraction and Raman spectroscopy, highlighting differences between phase-pure and multiphase ceramics. These analytical techniques allowed us to distinguish subtle differences in the structure of the material. Based on ab initio simulated phonon data, we were able to interpret the Raman spectra and visualise Raman active atom vibrations. We show that phase purity enables the unbiased characterisation of material properties such as negative thermal expansion. [ABSTRACT FROM AUTHOR]

Chemistry traditionally relies on reactions in solution, but this method is increasingly problematic due to the scale of chemical processes and their economic and environmental impact. Handling residual chemical waste, including solvents, incurs significant costs and environmental pressure. Conversely, novel chemical approaches are needed to address pressing societal issues such as climate change, energy scarcity, food insecurity, and waste pollution. Mechanochemistry, a sustainable chemistry discipline that uses mechanical action to induce chemical reactivity without bulk solvents, is a hot topic in academic research on sustainable and green chemistry. Given its fundamentally different working principles from solution chemistry, mechanochemistry offers more efficient chemical processes and the opportunity to design new chemical reactions. Mechanochemistry has a profound impact on many urgent issues facing our society and it is now necessary to use mechanochemistry to address them. This Minireview aims to provide a guide for using mechanochemistry to meet the United Nations (UN) Sustainable Development Goals (SDGs), thereby contributing to a prosperous society. Detailed analysis shows that mechanochemistry connects with most UN SDGs and offers more cost‐efficiency than other approaches together with a superior environmental performance. [ABSTRACT FROM AUTHOR]

The precipitation of struvite, a magnesium ammonium phosphate hexahydrate (MgNH4PO4 · 6H2O) mineral, from wastewater is a promising method for recovering phosphorous. While this process is commonly used in engineered environments, our understanding of the underlying mechanisms responsible for the formation of struvite crystals remains limited. Specifically, indirect evidence suggests the involvement of an amorphous precursor and the occurrence of multi-step processes in struvite formation, which would indicate non-classical paths of nucleation and crystallization. In this study, we use synchrotron-based in situ x-ray scattering complemented by cryogenic transmission electron microscopy to obtain new insights from the earliest stages of struvite formation. The holistic scattering data captured the structure of an entire assembly in a time-resolved manner. The structural features comprise the aqueous medium, the growing struvite crystals, and any potential heterogeneities or complex entities. By analysing the scattering data, we found that the onset of crystallization causes a perturbation in the structure of the surrounding aqueous medium. This perturbation is characterized by the occurrence and evolution of Ornstein-Zernike fluctuations on a scale of about 1 nm, suggesting a non-classical nature of the system. We interpret this phenomenon as a liquid-liquid phase separation, which gives rise to the formation of the amorphous precursor phase preceding actual crystal growth of struvite. Our microscopy results confirm that the formation of Mg-struvite includes a short-lived amorphous phase, lasting >10 s. [ABSTRACT FROM AUTHOR]

With increasing demand and environmental concerns, researchers are exploring new materials that can perform as well or better than traditional materials while reducing environmental impact. The BAMline, a real-life sample materials research beamline, provides unique insights into materials' electronic and chemical structure at different time and length scales. The beamline specializes in x-ray absorption spectroscopy, x-ray fluorescence spectroscopy, and tomography experiments. This enables real-time optimization of material properties and performance for various applications, such as energy transfer, energy storage, catalysis, and corrosion resistance. This paper gives an overview of the analytical methods and sample environments of the BAMline, which cover non-destructive testing experiments in materials science, chemistry, biology, medicine, and cultural heritage. We also present our own synthesis methods, processes, and equipment developed specifically for the BAMline, and we give examples of synthesized materials and their potential applications. Finally, this article discusses the future perspectives of the BAMline and its potential for further advances in sustainable materials research. [ABSTRACT FROM AUTHOR]

Phase transformations during high-energy ball milling, a tool of mechanochemistry, are interesting due to the possible production of metastable phases without the need for artificially introducing high temperatures and pressures. In our work, the transformation of calcite to aragonite in an eggshell is studied in detail. The presence of organic material, in either the naturally present eggshell membrane, or artificially supplied L -cysteine, was found to be crucial for the phase transformation to occur, its decomposition leading to a pressure increase necessary for aragonite formation. The presence of sulfur in the organics seems to be crucial, as corroborated by much lower phase transformation extent when utilizing sulfur-free organics for comparison. The degree of the transformation in an eggshell was strongly dependent on the used milling conditions. The optimization was assessed using the Taguchi method, namely using a 44 orthogonal array. The optimized parameters encompassed milling time, sample mass, milling speed and duration of breaks and it was shown that sample mass has a decisive effect on the amount of obtained aragonite. Under the most efficient conditions, 73.7% of aragonite was obtained. Prolonging milling until 4 hours further boosts the transformation, reaching 89.9% of aragonite, but further milling leads to the collapse of the aragonite structure and pure calcite was observed after 5 hours. [ABSTRACT FROM AUTHOR]

Photoresponsive molecular crystals have sparked interest owing to their potential application prospects. In this study, we achieved dual mechanical responses of a cyanostilbene-based crystal BN. The crystal exhibited both stress-induced mechanical flexibility and light-induced photomechanical bending. Two distinct mechanical responses are related to different underlying phenomena and were not interlinked. While elasticity is attributed to criss-cross packing arrangement in the isotropic structure, photomechanical bending is attributed to the formation of heterogeneous phase distribution due to monomer to dimer cycloaddition product formation. The crystal did not demonstrate photoswitching activity. However, it exhibited thermal reversibility, highlighting reversible dimer to monomer conversion. [ABSTRACT FROM AUTHOR]

Mechanochemistry is drawing attention from the pharmaceutical industry given its potential for sustainable material synthesis and manufacture. Scaling mechanochemical processes to industrial level remains a challenge due to an incomplete understanding of their underlying mechanisms. We here show how time-resolved in situ powder X-ray diffraction data, coupled with analytical kinetic modelling, provides a powerful approach to gain mechanistic insight into mechanochemical reactions. By using the ibuprofen–nicotinamide co-crystal mechanosynthesis as a benchmark system, we investigate the behaviour of the solids involved and identify the factors that promote the reaction. As mechanochemical mechanisms become increasingly clear, it promises to become a breakthrough in the industrial preparation of advanced pharmaceuticals. [ABSTRACT FROM AUTHOR]

X-ray absorption spectroscopy (XAS) provides a unique, atom-specific tool to probe the electronic structure of solids. By surmounting long-held limitations of powder-based XAS using a dynamically averaged powder in a Resonant Acoustic Mixer (RAM), we demonstrate how time-resolved in situ (TRIS) XAS provides unprecedented detail of mechanochemical synthesis. The use of a custom-designed dispersive XAS (DXAS) setup allows us to increase the time resolution over existing fluorescence measurements from ∼15 min to 2 s for a complete absorption spectrum. Hence, we here establish TRIS-XAS as a viable method for studying mechanochemical reactions and sampling reaction kinetics. The generality of our approach is demonstrated through RAM-induced (i) bottom-up Au nanoparticle mechanosynthesis and (ii) the synthesis of a prototypical metal organic framework, ZIF-8. Moreover, we demonstrate that our approach also works with the addition of a stainless steel milling ball, opening the door to using TRIS-DXAS for following conventional ball milling reactions. We expect that our TRIS-DXAS approach will become an essential part of the mechanochemical tool box. [ABSTRACT FROM AUTHOR]

Molecular crystals that exhibit photomechanical responses show great promise as photoactuators and other smart materials in various fields. Herein, we synthesized two new barbituric acid derivative crystals (crystals 1 and 2), which exhibit distinct photomechanical responses towards a laser irradiation of 532 nm and UV LED photoirradiation of 365 nm, respectively. Crystal 1 demonstrated photomechanical bending upon exposure to 532 nm laser, whereas crystal 2 exhibited dramatic bursting, followed by jumping of its fragments upon UV irradiation. The photomechanical responses of both crystals are attributed to the [2 + 2] photocycloaddition reaction. However, their different kinematic responses are related to different amounts of accumulated strain energy owing to photocycloaddition and its subsequent release in the crystal lattice. The accumulation of strain energy depended on various factors such as the structural arrangement of the crystals, packing modes and overall directionality of non-covalent interactions. Furthermore, the position of the olefinic bond and peripheral substituents played a key role in determining the development of strain energy. [ABSTRACT FROM AUTHOR]