Search

Verticillium wilt of cotton is an economically important disease caused by V. dahliae throughout the world. To control this disease, five bacterial strains from cotton-growing fields were screened for their antagonistic activity against V. dahliae. Interestingly, they were all identified as Paenibacillus polymyxa by testing morphological and ultrastructural characteristics as well as 16S rRNA sequences and fatty acid composition analysis. The observation of sporulation process revealed that the structure of the endospore coat was composed of three layers including outer, middle and inner spore coats. Among five strains, ShX301 showed highest antagonistic activity against spore germination and mycelial growth of V. dahliae. In addition, in vitro experiments showed that ShX301 had a broad-spectrum antifungal activity against other plant pathogens. The experiments for controlling Verticillium wilt of cotton in greenhouse demonstrated that inoculation by strain ShX301 reduced disease incidence and severity by 71.4% and 40.3%, respectively. Moreover, ShX301 significantly promoted the growth of cotton seedling. Assessment of plant growth promotion showed that inoculation by ShX301 promoted cotton plant growth enhancing aboveground seedling biomass by 45.5% as well as underground root length and biomass by 38.0% and 38.5%, respectively. This is the first report of P. polymyxa application to control Verticillium wilt of cotton and promoting cotton seedling growth. This study revealed that P. polymyxa ShX301 had high potential to be used as biocontrol agent and/or plant growth-promoting bacterium in agriculture.

CotA protein is a component of the endospore coat of Bacillus subtilis and it exhibits the activities of laccase. CotA protein is known as CotA laccase. A CotA laccase gene from B. subtilis WD23 was cloned and expressed in Escherichia coli. The expressed CotA laccase was observed in an active form. The molecular weight of CotA laccase was estimated to be 67.5 kDa. Optimal laccase activity was detected at pH 7.2 and 45 °C with syringaldazine as substrate. The half-life of the laccase was 1.5 h at 80 °C at the optimum pH. Half of the laccase activity was lost after 8 h at 45 °C and pH 9.0. The CotA laccase exhibited high tolerance to acetone, petroleum ether, ethyl acetate and chloroform, like spore laccase. Purified CotA laccase was activated 157 % by Cu2+ and remained stable to Fe2+. The purified CotA laccase could decolorize 87 % of Remazol Brilliant Blue R (RBBR) and 81 % of Congo Red in 6 h in absence of any mediator.

A novel endospore-based microbial method for "post-additional" antioxidant capacity assay was developed. The technique was based on oxidation and catalysis of the 2,2'-azinobis(3-ethylbenzothiazoline)-6-sulfonic acid (ABTS) by Bacillus subtilis 168 endospores in the presence of dissolved oxygen. Coat protein A (CotA), which belongs to the endospore coat, was expressed, purified, and assessed for its ability to oxidize ABTS into the ABTS(•+) radical cation. The wild-type endospore necessary for oxidizing ABTS into ABTS(•+) radical cation was confirmed by knocking out the cotA gene from B. subtilis 168 by homologous double exchange. Findings revealed that the catalytic activity of the endospores may be attributed to the presence of the CotA protein. The use of endospores instead of purified enzymes to prepare ABTS(•+) greatly reduced the assay cost and eliminated the need to purify and store of enzymes. The self-life of the radical cation was kept stable for at least 12 days without addition of a stabilizer and laccase inhibitor. This behavior enables the large-scale preparation of ABTS(•+). The antioxidant capacities of the individual antioxidants and fruit samples were easily quantified and compared using the proposed method. The developed technique can be further developed as a high-throughput screening technique for antioxidants.

Sporulation in Bacillus subtilis involves an asymmetric cell division followed by differentiation into two cell types, the endospore and the mother cell. The endospore coat is a multilayered shell that protects the bacterial genome during stress conditions and is composed of dozens of proteins. Recently, fluorescence microscopy coupled with high-resolution image analysis has been applied to the dynamic process of coat assembly and has shown that the coat is organized into at least four distinct layers. In this Review, we provide a brief summary of B. subtilis sporulation, describe the function of the spore surface layers and discuss the recent progress that has improved our understanding of the structure of the endospore coat and the mechanisms of coat assembly.

Multicopper oxidases are a multi-domain family of enzymes that are able to couple oxidation of substrates with reduction of dioxygen to water. These enzymes are capable of oxidizing a vast range of substrates, varying from aromatic to inorganic compounds such as metals. This metallo-oxidase activity observed in several members of this family has been linked to mechanisms of homeostasis in different organisms. Recently, a periplasmic multicopper oxidase, encoded by Campylobacter jejuni, has been characterised and associated with copper homeostasis and with the protection against oxidative stress as it may scavenge metallic ions into their less toxic form and also inhibit the formation of radical oxygen species. In order to contribute to the understanding of its functional role, the crystal structure of the recombinant McoC (Campylobacter jejuni CGUG11284) has been determined at 1.95 Å resolution and its structural and biochemical characterizations undertaken. The results obtained indicate that McoC has the characteristic fold of a laccase having, besides the catalytic centres, another putative binding site for metals. Indeed, its biochemical and enzymatic characterization shows that McoC is essentially a metallo-oxidase, showing low enzymatic efficiency towards phenolic substrates.

Bacterial endospores are some of the most resilient forms of life known to us, with their persistent survival capability resulting from a complex and effective structural organization. The outer membrane of endospores is surrounded by the densely packed endospore coat and exosporium, containing amyloid or amyloid-like proteins. In fact, it is the impenetrable composition of the endospore coat and the exosporium that makes staining methodologies for endospore detection complex and challenging. Therefore, a plausible strategy for facile and expedient staining would be to target components of the protective surface layers of the endospores. Instead of targeting endogenous markers encapsulated in the spores, here we demonstrated staining of these dormant life entities that targets the amyloid domains, i.e., the very surface components that make the coats of these species impenetrable. Using an amyloid staining dye, thioflavin T (ThT), we examined this strategy. A short incubation of bacillus endospore suspensions with ThT, under ambient conditions, resulted in (i) an enhancement of the fluorescence of ThT and (ii) the accumulation of ThT in the endospores, affording fluorescence images with excellent contrast ratios. Fluorescence images revealed that ThT tends to accumulate in the surface regions of the endospores. The observed fluorescence enhancement and dye accumulation, coupled with the sensitivity of emission techniques, provide an effective and rapid means of staining endospores without the inconvenience of pre- or posttreatment of samples.

The CotA laccase from the endospore coat of Bacillus subtilis has been crystallized in the presence of the non-catalytic co-oxidant 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonate) (ABTS), and the structure was determined using synchrotron radiation. The binding site for this adduct is well defined and indicates how ABTS, in conjunction with laccases, could act as an oxidative mediator toward non-phenolic moieties. In addition, a dioxygen moiety is clearly defined within the solvent channel oriented toward one of the T3 copper atoms in the trinuclear center.

Endospores produced by the Gram-positive soil bacterium Bacillus subtilis are shielded by a proteinaceous coat formed by over 30 structural components, which self-assemble into a lamellar inner coat and a thicker striated electrodense outer coat. The 65-kDa CotA protein is an abundant component of the outer coat layer. CotA is a highly thermostable laccase, assembly of which into the coat is required for spore resistance against hydrogen peroxide and UV light. Here, we report the structure of CotA at 1.7-A resolution, as determined by x-ray crystallography. This is the first structure of an endospore coat component, and also the first structure of a bacterial laccase. The overall fold of CotA comprises three cupredoxin-like domains and includes one mononuclear and one trinuclear copper center. This arrangement is similar to that of other multicopper oxidases and most similar to that of the copper tolerance protein CueO of Escherichia coli. However, the three cupredoxin domains in CotA are further linked by external interdomain loops, which increase the packing level of the structure. We propose that these interdomain loops contribute to the remarkable thermostability of the enzyme, but our results suggest that additional factors are likely to play a role. Comparisons with the structure of other monomeric multicopper oxidases containing four copper atoms suggest that CotA may accept the largest substrates of any known laccase. Moreover, and unlike other laccases, CotA appears to have a flexible lidlike region close to the substrate-binding site that may mediate substrate accessibility. The implications of these findings for the properties of CotA, its assembly and the properties of the bacterial spore coat structure are discussed.

The Bacillus subtilis endospore coat protein CotA shows laccase activity. By using comparative modeling techniques, we were able to derive a model for CotA based on the known x-ray structures of zucchini ascorbate oxidase and Cuprinus cereneus laccase. This model of CotA contains all the structural features of a laccase, including the reactive surface-exposed copper center (T1) and two buried copper centers (T2 and T3). Single amino acid substitutions in the CotA T1 copper center (H497A, or M502L) did not prevent assembly of the mutant proteins into the coat and did not alter the pattern of extractable coat polypeptides. However, in contrast to a wild type strain, both mutants produced unpigmented colonies and spores unable to oxidize syringaldazine (SGZ) and 2'2-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS). The CotA protein was purified to homogeneity from an overproducing Escherichia coli strain. The purified CotA shows an absorbance and a EPR spectra typical of blue multicopper oxidases. Optimal enzymatic activity was found at < or =pH 3.0 and at pH 7.0 for ABTS or SGZ oxidation, respectively. The apparent K(m) values for ABTS and SGZ at 37 degrees C were of 106 +/- 11 and 26 +/- 2 microm, respectively, with corresponding k(cat) values of 16.8 +/- 0.8 and 3.7 +/- 0.1 s(-1). Maximal enzyme activity was observed at 75 degrees C with ABTS as substrate. Remarkably, the coat-associated or the purified enzyme showed a half-life of inactivation at 80 degrees C of about 4 and 2 h, respectively, indicating that CotA is intrinsically highly thermostable.

Many biological processes are mediated through the action of multiprotein complexes, often assembled at specific cellular locations. Bacterial endospores for example, are encased in a proteinaceous coat, which confers resistance to lysozyme and harsh chemicals and influences the spore response to germinants. In Bacillus subtilis, the coat is composed of more than 20 polypeptides, organized into three main layers: an amorphous undercoat; a lamellar, lightly staining inner structure; and closely apposed to it, a striated electron-dense outer coat. Synthesis of the coat proteins is temporally and spatially governed by a cascade of four mother cell-specific transcription factors. However, the order of assembly and final destination of the coat structural components may rely mainly on specific protein-protein interactions, as well as on the action of accessory morphogenetic proteins. Proteolytic events, protein-protein crosslinking, and protein glycosylation also play a role in the assembly process. These modifications are carried out by enzymes that may themselves be targeted to the coat layers. Coat genes have been identified by reverse genetics or, more recently, by screens for mother cell-specific promoters or for peptide sequences able to interact with certain bait proteins. A role for a given locus in coat assembly is established by a combination of regulatory, functional, morphological, and topological criteria. Because of the amenability of B. subtilis to genetic analysis (now facilitated by the knowledge of its genome sequence), coat formation has become an attractive model for the assembly of complex macromolecular structures during development.

The aim of the present work is to provide insight into the mechanism of laccase reactions using syringyl-type mediators. We studied the pH dependence and the kinetics of oxidation of syringyl-type phenolics using the low CotA and the high redox potential TvL laccases. Additionally, the efficiency of these compounds as redox mediators for the oxidation of non-phenolic lignin units was tested at different pH values and increasing mediator/non-phenolic ratios. Finally, the intermediates and products of reactions were identified by LC–MS and 1 H NMR. These approaches allow concluding on the (1) mechanism involved in the oxidation of phenolics by bacterial laccases, (2) importance of the chemical nature and properties of phenolic mediators, (3) apparent independence of the enzyme’s properties on the yields of non-phenolics conversion, (4) competitive routes involved in the catalytic cycle of the laccase-mediator system with several new C–O coupling type structures being proposed.

Thanks to their high stability over a wide range of experimental conditions, extremophilic enzymes represent an interesting alternative to mesophilic enzymes as catalysts for biofuel cell applications. In the present work, we report for the first time the immobilization of a thermophilic laccase (CotA from Bacillus subtilis endospore coat) on glassy carbon electrodes functionalized via electrochemical reduction of in situ generated aminophenyl monodiazonium salts. We compare the performance of CotA-modified electrodes for the reduction of O2 to mutant variants and demonstrate that the measured electrical current is directly correlated to the catalytic efficiencies (kcat/Km) of the immobilized enzyme. CotA-modified electrodes showed an optimal operation temperature of 45–50 °C and stable catalytic activity for at least 7 weeks. Keywords: CotA laccase, Glassy carbon, Aryldiazonium reduction, O2 reduction

The contribution of the disulfide bridge in CotA-laccase from Bacillus subtilis is assessed with respect to the enzyme’s functional and structural properties. The removal of the disulfide bond by site-directed mutagenesis, creating the C322A mutant, does not affect the spectroscopic or catalytic properties and, surprisingly, neither the long-term nor the thermodynamic stability parameters of the enzyme. Furthermore, the crystal structure of the C322A mutant indicates that the overall structure is essentially the same as that of the wild type, with only slight alterations evident in the immediate proximity of the mutation. In the mutant enzyme, the loop containing the C322 residue becomes less ordered, suggesting perturbations to the substrate binding pocket. Despite the wild type and the C322A mutant showing similar thermodynamic stability in equilibrium, the holo or apo forms of the mutant unfold at faster rates than the wild-type enzyme. The picosecond to nanosecond time range dynamics of the mutant enzyme was not affected as shown by acrylamide collisional fluorescence quenching analysis. Interestingly, copper uptake or copper release as measured by the stopped-flow technique also occurs more rapidly in the C322A mutant than in the wild-type enzyme. Overall the structural and kinetic data presented here suggest that the disulfide bridge in CotA-laccase contributes to the conformational dynamics of the protein on the microsecond to millisecond timescale, with implications for the rates of copper incorporation into and release from the catalytic centres.

The multicopper oxidases couple the one-electron oxidation of four substrate molecules to the four electron reductive cleavage of the O-O bond of dioxygen. This reduction takes place at the trinuclear copper centre of the enzyme and the dioxygen approaches this centre through an entrance channel. In this channel, an acidic residue plays a key role in steering the dioxygen to the trinuclear copper site, providing protons for the catalytic reaction and giving overall stability to this site. In this study, the role of the Glu(498) residue, located within the entrance channel to the trinuclear copper centre, has been investigated in the binding and reduction of dioxygen by the CotA-laccase from Bacillus subtilis. The absence of an acidic group at the 498 residue, as in the E498T and E498L mutants, results in a severe catalytic impairment, higher than 99%, for the phenolic and non-phenolic substrates tested. The replacement of this glutamate by aspartate leads to an activity that is around 10% relative to that of the wild-type. Furthermore, while this latter mutant shows a similar K(m) value for dioxygen, the E498T and E498L mutants show a decreased affinity, when compared to the wild-type. X-ray structural and spectroscopic analysis (UV-visible, electron paramagnetic resonance and resonance Raman) reveal perturbations of the structural properties of the catalytic centres in the Glu(498) mutants when compared to the wild-type protein. Overall, the results strongly suggest that Glu(498) plays a key role in the protonation events that occur at the trinuclear centre and in its stabilization, controlling therefore the binding of dioxygen and its further reduction.

This paper describes the use of hyperspectral imaging microscopy (HIM) for the characterization and differentiation of live viable versus dead/non-viable bacterial endospores for two species of Bacillus. To accomplish this, endospore-forming Bacillus were cultured and differentiated into endospores. Non-viable endospores were produced using sporicidal methods representing standard decontamination procedures incorporating chlorine and peroxide. Finally, endospore samples were lyophilized to prepare them for spectral analysis. Prior to HIM, baseline spectral reflectance characterizing the endospores was measured using an ASD (400-900 nm) reflectance spectrometer. These data were used to calibrate the resulting spectral image data. HIM data comprising 32 images ranging from 400 to 720 nm (visible to near infrared) were recorded using a C-mounted VariSpec hyperspectral camera attached to an epifluorescent microscope. The images produced by the system record the reflectance and absorption features of endospores based on the structure of the outer coat. Analysis of the HIM data was performed using accepted image and spectral processing routines. Where peroxide was the sporicide, changes in the outer endospore coat contributed to structurally significant visible and near infrared signature differences between live-viable versus dead, non-viable endospores. A statistical test for divergence, a method for scoring spectral structural diversity, also showed the difference between viable and non-viable peroxide killed endospores to be statistically significant. These findings may lead to an improved optical procedure to rapidly identify viable and non-viable endospores in situations of decontamination.

One enzyme, one physiological role, that’s how most scientists have traditionally looked at it but there is a growing appreciation that some enzymes “moonlight” i.e. in addition to their “primary” catalytic function, they carry other functions as well. Moonlighting refers to a protein that has multiple functions, which are not because of gene fusion; splice variants or multiple proteolytic fragments. Until recently laccases were reported from eukaryotes, e.g. fungi, plants, insect. However there is some evidence for its existence in prokaryotes, a protein with typical features of multi-copper oxidase enzyme family. The present available knowledge of its structure provides a glimpse of its plasticity, revealing a multitude of binding sites responsible for multifunctional activity. Laccase represents an example of a ‘moonlighting’ protein that overcomes the one gene-one structure-one function concept to follow the changes of the organism in its physiological and pathological conditions. It is wide spread in plants, where it is involved in biosynthesis of lignin; in fungi it is involved in lignin degradation, development associated pigmentation (melanin synthesis), detoxification and pathogenesis, and in bacteria, laccases are involved in the synthesis of endospore coat protein (cot A).

The axial ligand of the catalytic mononuclear T1 copper site (Met(502)) of the CotA laccase was replaced by a leucine or phenylalanine residue to increase the redox potential of the enzyme. These mutations led to an increase in the redox potential by approx. 100 mV relative to the wild-type enzyme but the catalytic constant k(cat) in the mutant enzymes was severely compromised. This decrease in the catalytic efficiency was unexpected as the X-ray analysis of mutants has shown that replacement of methionine ligand did not lead to major structural changes in the geometry of the T1 Centre or in the overall fold of the enzyme. However, the mutations have a profound impact on the thermodynamic stability of the enzyme. The fold of the enzyme has become unstable especially with the introduction of the larger phenylalanine residue and this instability should be related to the decrease in the catalytic efficiency. The instability of the fold for the mutant proteins resulted in the accumulation of an intermediate state, partly unfolded, in-between native and unfolded states. Quenching of tryptophan fluorescence by acrylamide has further revealed that the intermediate state is partly unfolded. info:eu-repo/semantics/publishedVersion

The three-dimensional molecular structure of human serum ceruloplasmin has been reinvestigated using X-ray synchrotron data collected at 100 K from a crystal frozen to liquid-nitrogen temperature., The three-dimensional molecular structure of human serum ceruloplasmin has been reinvestigated using X-ray synchrotron data collected at 100 K from a crystal frozen to liquid-nitrogen temperature. The resulting model, with an increase in resolution from 3.1 to 2.8 Å, gives an overall improvement of the molecular structure, in particular the side chains. In addition, it enables the clear definition of previously unidentified Ca2+-binding and Na+-binding sites. The Ca2+ cation is located in domain 1 in a configuration very similar to that found in the activated bovine factor Va. The Na+ sites appear to play a structural role in providing rigidity to the three protuberances on the top surface of the molecule. These features probably help to steer substrates towards the mononuclear copper sites prior to their oxidation and to restrict the size of the approaching substrate. The trinuclear copper centre appears to differ from the room-temperature structure in that a dioxygen moiety is bound in a similar way to that found in the endospore coat protein CotA from Bacillus subtilis.

Morphogenetic proteins such as SpoVID and SafA govern assembly of the Bacillus subtilis endospore coat by guiding the various protein structural components to the surface of the developing spore. Previously, a screen for peptides able to interact with SpoVID led to the identification of a PYYH motif present in the C-terminal half of the SafA protein and to the subsequent demonstration that SpoVID and SafA directly interact. spoVID and safA spores show deficiencies in coat assembly and are lysozyme susceptible. Both proteins, orthologs of which are found in all Bacillus species, have LysM domains for peptidoglycan binding and localize to the cortex-coat interface. Here, we show that the interaction between SafA and SpoVID involves the PYYH motif (region B) but also a 13-amino-acid region (region A) just downstream of the N-terminal LysM domain of SafA. We show that deletion of region B does not block the interaction of SafA with SpoVID, nor does it bring about spore susceptibility to lysozyme. Nevertheless, it appears to reduce the interaction and affects the complex. In contrast, lesions in region A impaired the interaction of SafA with SpoVID in vitro and, while not affecting the accumulation of SafA in vivo, interfered with the localization of SafA around the developing spore, causing aberrant assembly of the coat and lysozyme sensitivity. A peptide corresponding to region A interacts with SpoVID, suggesting that residues within this region directly contact SpoVID. Since region A is highly conserved among SafA orthologs, this motif may be an important determinant of coat assembly in the group of Bacillus spore formers.

The multi-copper oxidases oxidise substrate molecules by accepting electrons at a mononuclear copper centre and transferring them to a trinuclear centre. Dioxygen binds to the trinuclear centre and, following the transfer of four electrons, is reduced to two molecules of water. The precise mechanism of this reduction has been unclear, but recent X-ray structural studies using the CotA endospore coat protein from Bacillus subtilis have given further insights into the principal stages. It is proposed that the mechanism involves binding of the dioxygen into the trinuclear centre so that it is sited approximately symmetrically between the two type 3 copper ions with one oxygen atom close to the type 2 copper ion. Further stages involve the formation of a peroxide intermediate and following the splitting of this intermediate, the migration of the hydroxide moieties towards the solvent exit channel. The migration steps are likely to involve a movement of the type 2 copper ion and its environment. Details of a putative mechanism are described herein based both on structures already reported in the literature and on structures of the CotA protein in the oxidised and reduced states and with the addition of peroxide and the inhibitor, azide.

Multicopper oxidases (MCOs) are a family of enzymes that use copper ions as cofactors to oxidize various substrates. Previous research has demonstrated that several MCOs such as MnxG, MofA and MoxA can act as putative Mn(II) oxidases. Meanwhile, the endospore coat protein CotA from Bacillus species has been confirmed as a typical MCO. To study the relationship between CotA and the Mn(II) oxidation, the cotA gene from a highly active Mn(II)-oxidizing strain Bacillus pumilus WH4 was cloned and overexpressed in Escherichia coli strain M15. The purified CotA contained approximately four copper atoms per molecule and showed spectroscopic properties typical of blue copper oxidases. Importantly, apart from the laccase activities, the CotA also displayed substantial Mn(II)-oxidase activities both in liquid culture system and native polyacrylamide gel electrophoresis. The optimum Mn(II) oxidase activity was obtained at 53°C in HEPES buffer (pH 8.0) supplemented with 0.8 mM CuCl2. Besides, the addition of o-phenanthroline and EDTA both led to a complete suppression of Mn(II)-oxidizing activity. The specific activity of purified CotA towards Mn(II) was 0.27 U/mg. The Km, Vmax and kcat values towards Mn(II) were 14.85±1.17 mM, 3.01×10(-6)±0.21 M·min(-1) and 0.32±0.02 s(-1), respectively. Moreover, the Mn(II)-oxidizing activity of the recombinant E. coli strain M15-pQE-cotA was significantly increased when cultured both in Mn-containing K liquid medium and on agar plates. After 7-day liquid cultivation, M15-pQE-cotA resulted in 18.2% removal of Mn(II) from the medium. Furthermore, the biogenic Mn oxides were clearly observed on the cell surfaces of M15-pQE-cotA by scanning electron microscopy. To our knowledge, this is the first report that provides the direct observation of Mn(II) oxidation with the heterologously expressed protein CotA, Therefore, this novel finding not only establishes the foundation for in-depth study of Mn(II) oxidation mechanisms, but also offers a potential biocatalyst for Mn(II) removal.

Bacterial endospores are encased in a complex protein coat, which confers protection against noxious chemicals and influences the germination response. In Bacillus subtilis , over 20 polypeptides are organized into an amorphous undercoat, a lamellar lightly staining inner structure, and an electron-dense outer coat. Here we report on the identification of a polypeptide of about 30 kDa required for proper coat assembly, which was extracted from spores of a gerE mutant. The N-terminal sequence of this polypeptide matched the deduced product of the tasA gene, after removal of a putative 27-residue signal peptide, and TasA was immunologically detected in material extracted from purified spores. Remarkably, deletion of tasA results in the production of asymmetric spores that accumulate misassembled material in one pole and have a greatly expanded undercoat and an altered outer coat structure. Moreover, we found that tasA and gerE mutations act synergistically to decrease the efficiency of spore germination. We show that tasA is the most distal member of a three-gene operon, which also encodes the type I signal peptidase SipW. Expression of the tasA operon is enhanced 2 h after the onset of sporulation, under the control of ς H . When tasA transcription is uncoupled from sipW expression, a presumptive TasA precursor accumulates, suggesting that its maturation depends on SipW. Mature TasA is found in supernatants of sporulating cultures and intracellularly from 2 h of sporulation onward. We suggest that, at an early stage of sporulation, TasA is secreted to the septal compartment. Later, after engulfment of the prespore by the mother cell, TasA acts from the septal-proximal pole of the spore membranes to nucleate the organization of the undercoat region. TasA is the first example of a polypeptide involved in coat assembly whose production is not mother cell specific but rather precedes its formation. Our results implicate secretion as a mechanism to target individual proteins to specific cellular locations during the assembly of the bacterial endospore coat.