Search

We investigated the treatment efficiency of micro-polluted NO3−-dominated river water with low C/N ratio by five parallel pilot-scale IVCWs with different plant and substrate collocation. When the mean concentration was 2.24 and 0.193 mg L−1 in influent, IVCWs achieved an average (mass) removal rate of (0.09 g m−2 day−1) 46.8% and (0.77 g m−2 day−1) 62.3% for TN and TP, respectively, during 1 year of operation. Water quality was significantly improved from grade V to meet the criterion of grade IV of surface water. Through the comparison of removal rate by different IVCWs, we found that lack of carbon sources in influent limited the denitrification in the middle and bottom layers (ML, BL) of IVCW. Zeolites deployed in the upper layer (UL) of IVCW reduced the overall N removal efficiency compared with gravels, due to a stronger nitrification but weaker denitrification. Canna indica (C. indica) was superior to Arundo donax (A. donax) and Thalia dealbata (T. dealbata) for N removal in the UL of IVCW due to higher aboveground biomass accumulation and microbial removal during the first 10 months. Stronger nitrification and denitrification were simultaneously facilitated near the rhizosphere of C. indica. When entered into Dec., A. donax performed higher N removal efficiency than the other two species. The internal replenishment of peats in the ML as carbon sources significantly improved N and P removal efficiency. Zeolites with stronger capacity of ammonium (NH4+) adsorption was more in favor of anammox in the BL, when compared with roseites, but both of them were not conducive to the growth of denitrifiers. However, the deployment of shale ceramisites obtained an opposite result. Gemmata and Pirellula as anammox bacteria were more enriched in the zeolite layer, whereas some anaerobic denitrifiers (Corynebacterium and Paludibacter) and heterotrophic denitrifiers including Bacillus, Geobacter, Pseudomonas, and Lactococcus were more found in shale ceramisite. Supply of peats as carbon sources in the ML was beneficial for the adhesion of anammox bacteria and denitrifiers in the BL of shale ceramisites. An ideal model composed of C. indica + A. donax (DFU)-gravel (UL)-anthracite+peat (ML)-zeolite+shale ceramsite (BL)-Acorus calamus (UFU) was proposed for treating this type of river water to achieve high efficiency.

Submerged macrophyte Vallisneria spiralis and sediment microbial fuel cell (SMFC) systems are cost-effective methods for the remediation of polycyclic aromatic hydrocarbon (PAH)–polluted sediments. This study evaluates whether the combination of these two ecological approaches could further improve the removal efficiency of PAHs from sediments and investigates the possible mechanisms of removal. Sediments, macrophytes, electrodes, and plexiglass columns were used to construct an experimental microcosm. A 65-day comparative study was performed with six treatments as follows: SMFC without PAH (SMFC); PAH only (PAH); SMFC with PAH (SMFC-PAH); V. spiralis without PAH (macrophyte); V. spiralis with PAH (macrophyte-PAH); V. spiralis with SMFC and PAH (M-SMFC-PAH). Pyrene and phenanthrene were added to raw sediments to obtain initial PAH concentrations of 10 mg kg−1 dry sediment. The monitored parameters were sediment oxidation–reduction potential (ORP); low molecular weight organic acids (LMWOAs) and Fe (II) concentrations in pore water; electron acceptor (sulfate and Fe (III)), humic acid (HA), and PAH concentrations in sediments; and plant morphology and root physiology. High-throughput 16S rRNA gene sequencing was also performed to assist mechanistic understanding. The M-SMFC-PAH treatment obtained the highest sediment ORP and PAH removal efficiency. The average ORP level in M-SMFC-PAH was increased by 57.2, 59.1, and 168.4 mV, compared with the SMFC-PAH, macrophyte-PAH, and PAH-only treatments, respectively, with a mean value of 121.7 mV observed during the whole experimental period. The pyrene (phenanthrene) dissipation ratios at the end of the experimental period were 29.1% (35.4%), 45.5% (56.3%), 59.8% (67.3%), and 79.4% (88.2%) for PAH only, SMFC-PAH, macrophyte-PAH, and M-SMFC-PAH treatments, respectively. The highest correlation was observed between PAH concentration and sediment ORP value, in the coupled M-SMFC-PAH system. Results suggest that the interactions between the anode and rhizosphere of V. spiralis were synergistic during PAH removal. The coexistence of anodic and rhizospheric oxygen loss in sediments had a synergistic effect on PAH degradation. Plant presence facilitated the electrogenic degradation of PAHs. The inhibited growth of V. spiralis due to PAH toxicity was reduced by electrogenesis, thus facilitating the removal of vegetable PAHs from sediments. Coordinated growth of anaerobic and aerobic PAH degrading bacteria on the anode was a key factor in the optimal removal of PAHs in coupled systems.

The hybrid system of constructed wetland and microbial fuel cell (CW-MFC) used as a biosensor is becoming a new research focus with the advantage of resisting the shock loading and enriching more electricigens. In this study, a structural parameter S integrating the size, the position and the spacing of the anode and the cathode was proposed. And the electrogenesis and biosensing performances of the vertical flow CW-MFC biosensors were evaluated at different S values. The results showed that all the three biosensors could achieve good monitoring for COD (R

To find suitable wetland plants for constructed wetland-microbial fuel cells (CW-MFCs), four commonly used wetland plants, including Canna indica, Cyperus alternifolius L., Acorus calamus, and Arundo donax, were investigated for their electrogenic performance and physiological changes during non-growing seasons. The maximum power output of 12.82mW/m2 was achieved in the A. donax CW-MFC only when root exudates were being released. The results also showed that use of an additional carbon source could remarkably improve the performance of electricity generation in the C. indica and A. donax CW-MFCs at relatively low temperatures (2-15°C). However, A. calamus withered before the end of the experiment, whereas the other three plants survived the winter safely, although their relative growth rate values and the maximum quantum yield of PSII (Fv/Fm) significantly declined, and free proline and malondialdehyde significantly accumulated in their leaves. On the basis of correlation analysis, temperature had a greater effect on plant physiology than voltage. The results offer a valuable reference for plant selection for CW-MFCs.

In a mesocosm experiment, the growth and photosynthetic responses of Vallisneria natans (Lour.) Hara was studied monthly in different water depths under flowing and static water. Water depth showed a significant effect on the shoot length, below-ground: above-ground biomass, and total biomass, while water velocity showed only a significant effect on the total biomass. In addition, total biomass and shoot length at 45, 75 and 105 cm was higher in the flowing treatment than that in the static treatment, which suggested that total biomass and shoot length are promoted by water flow to some extent. All of the investigated photosynthetic showed different changes with different months. Water depth exhibited significant effects on the maximum photosynthetic efficiency Fv/Fm, the maximum electron transport rate rETRmax, Chla, Chla + b and Chla/b, while water velocity showed only significant effects on Chla, Chla + b, ETRmax. The rapid light response curves varied differently with the time periods. In October, the time-course of slow chlorophyll a fluorescence induction curves, Fm peak, in the flowing treatment in 45, 75 and 105 cm is higher than that in the static treatment. All the results demonstrated that the differences between flowing and static water resulted in the different life strategy.

A novel constructed wetland-microbial fuel cell system by tidal flow operation (TFCW-MFC) was constructed to intensify ammonia nitrogen removal. The nitrogen removal performance of the TFCW-MFC with different ratios of drained and flooded time (D/F ratios) was investigated to determine the optimal operating strategy. The highest TN removal efficiency of 52.89 ± 3.16% was obtained at the D/F ratio of 1:5 (C/N ratio: 5). The bacterial communities in the anode (granular activated carbon and graphite felt, referred to as TF_a1 and TF_a2, respectively) and the cathode (graphite felt, referred to as TF_c) collected from the TFCW-MFC were characterized using 16S rRNA gene high-throughput sequencing technology. The high abundance of Nitrospira predominant in the anode indicated that the tidal flow operation strengthened the system's reoxygenation ability, thus improving the overall nitrification efficiency of the system. Besides, Acinetobacter (21.67%) in the cathode could play an important role in the heterotrophic aerobic denitrification process.

The phosphorus reduction in water column was attempted by integrating sediment microbial fuel cells (SMFCs) with the submerged macrophyte Vallisneria spiralis. A comparative study was conducted to treat simulated water rich in phosphate with a control and three treatments: SMFC alone (SMFC), submerged macrophytes alone (macophyte), and combined macrophytes and fuel cells (M-SMFC). All treatments promoted phosphorus flux from the water column to sediments. Maximum phosphorus reduction was obtained in proportion to the highest stable phosphorus level in sediments in M-SMFC. For the initial phosphate concentrations of 0.2, 1, 2, and 4 mg/L, average phosphate values in the overlying water during four phases decreased by 33.3% (25.0%, 8.3%), 30.8% (5.1%, 17.9%), 36.5% (27.8%, 15.7%), and 36.2% (0.7%, 22.1%) for M-SMFC (macrophyte, SMFC), compared with the control. With macrophyte treatment, the obvious phosphorus release from sediments was observed during the declining period. However, such phenomenon was significantly inhibited with M-SMFC. The electrogenesis bacteria achieved stronger phosphorus adsorption and assimilation was significantly enriched on the closed-circuit anodes. The higher abundance of Geobacter and Pseudomonas in M-SMFC might in part explain the highest phosphorus reduction in the water column. M-SMFC treatment could be promising to control the phosphorus in eutrophic water bodies.

A bioelectrochemically-assisted constructed wetland (BECW) system was used to treat nitrate-contaminated wastewater without organic carbon source. The denitrification performance and microbial community composition of a BECW in closed-circuit mode (BECW-C) was compared to a BECW in open-circuit mode (BECW-O). The highest denitrification efficiency (78.92±3.12%) was obtained in the BECW-C with an applied current of 15mA. No nitrite accumulation was observed during the autotrophic denitrification process in the BECW-C. The significantly higher denitrification efficiency of the BECW-C compared to the BECW-O suggested enhanced denitrification due to in situ generation of hydrogen. The bacterial communities in the anode, cathode and rhizosphere regions collected from the BECW-C (with 10 or 15mA) and the BECW-O were characterized using 16S rRNA pyrosequencing technology, which revealed different microbial community structures among the treatments. The results also indicated that Thiohalophilus and Clostridium sensu stricto might be responsible for autotrophic denitrification in the BECW-C.

In this study, we evaluated the effects of two dominant microfilamentous algae (i.e. Melosira granulata and Oscillatoria sp.), collected from the West Lake, on growth and metabolism of Daphnia magna. Our experiment utilized 13C and 15N dual labeling to calculate the carbon and nitrogen isotopic turnover rates and half-life times in D. magna. The two labeled types of filaments were offered to D. magna as sole food sources or as paired mixtures with the unlabeled Scenedesmus obliquus. Labeled S. obliquus served as the control. Combined results showed that D. magna had a higher grazing rate on Oscillatoria sp. than on M. granulate and a small percentage of unlabeled S. obliquus addition could improve the grazing rate in both filamentous algae, especially for Oscillatoria sp., which had the highest carbon and nitrogen isotopic turnover rates and the lowest half times, even superior to the sole S. obliquus treatment. Our study revealed that D. magna could utilize the two dominant filamentous algae as a food source for their growth and metabolism, and a small percentage addition of S. obliquus could ameliorate the negative impact of these two filamentous algae on D. magna.

Settled algae may be used as nutrient for macrophyte establishment, but also can induce marked macrophyte decline during deep anaerobic decomposition. Sediment microbial fuel cells (SMFCs) may promote the utilization of algae-derived nutrients and relieve bio-toxicity from settled algae to submerged macrophytes, thus facilitating plant production. To test these hypotheses, a 62-day comparative study was designed and conducted in microcosms with the following six treatments: control (open-circuit SMFC), plant (open-circuit SMFC with plants), algae (open-circuit SMFC with algae), algae-plant (open-circuit SMFC with algae and plants), algae-SMFC (closed-circuit SMFC with algae), and algae-plant-SMFC (closed-circuit SMFC with algae and plants). The results showed that the presence of Hydrilla verticillata improved the power generation of SMFCs when algae were used as substrates during the whole operation. The decomposition of sedimented algae experienced two periods since the injection. During the slight decomposition period (14–38 day), the algal retention in sediments was enhanced by H. verticillata as a nutrient source. Nitrogen (N) assimilation in plant shoots was facilitated under electrogenesis due to a simultaneous increase of algae-derived dissolved inorganic carbon (DIC) and ammonium (NH4+) in the water column. At the end of the 38th day, the biomass of H. verticillata were increased by 21.4% and 52.3%, respectively, in the algae-plant and algae-plant-SMFC, compared with that in plant treatment. Obvious NH4+-stress was exerted on H. verticillata during the following intense algal decomposition period (38–62 day). Compared with shoots, roots of H. verticillata were more sensitive to the biotoxicity of algae-derived NH4+. The electrogenetic process diverted the degradation pathway from acetoclastic methanogenesis to electrogenesis via redox cycle, resulting in delayed algal decomposition in algae-SMFC treatment. In addition, electrogenesis enhanced the removal of algae-derived N. As a result, NH4+ toxicity to plant roots was effectively alleviated, and sedimented algae served as a stable nutrient source for plant development. Stable transfer rate of algae-derived N from sediments to plant roots was observed, while the assimilation rate of algae-derived N from water column to plant shoots showed a constant increase in the algae-plant-SMFC treatment. Electrogenesis enhanced N-fixing capacity belonged to rhizosphere of H. verticillata, evidenced by greater enrichment of some plant growth-promoting rhizobacteria (PGPRs), including Bradyrhizobium, Mycobacterium, Paenibacillus, Mesorhizobium, and Roseomonas in the algae-plant-SMFC treatment. At the end of the experiment, marked increases in the production of H. verticillata in algae-plant-SMFC were observed, with 90.1% and 32.8%, respectively, when compared with algae-plant and plant treatments (p

Three novel constructed wetland-microbial fuel cells (CW-MFCs), based on electrode location, were developed for wastewater treatment and sustainable electricity production by embedding a MFC into a CW system. In the three CW-MFCs, electrodes were placed in different locations, including bottom anode-rhizosphere cathode CW-MFC (BA-RC-CW-MFC), rhizosphere anode-air cathode CW-MFC (RA-AC-CW-MFC), and bottom anode-air cathode CW-MFC (BA-AC-CW-MFC), to investigate the combined effects of organic loading rates (OLRs) and reactor configurations on the electrogenesis capacity of the hybrid system. All the systems operated continuously to treat five types of synthetic wastewater with increasing OLRs: 9.2, 18.4, 27.6, 55.2, and 92.0 g chemical oxygen demand (COD) m−2 d−1. The BA-RC-CW-MFC failed to produce electricity at any OLR, whereas the maximum power densities of 0.79 ± 0.01 and 10.77 ± 0.52 mW m−2 were achieved in the RA-AC-CW-MFC with 18.4 g COD m−2 d−1 influent OLR and in the BA-AC-CW-MFC with 27.6 g COD m−2 d−1 influent OLR, respectively. The coulombic efficiencies of the RA-AC-CW-MFC and BA-AC-CW-MFC decreased gradually with the increase in influent OLRs. © 2016 American Institute of Chemical Engineers Environ Prog, 36: 435–441, 2017

The performance of bioelectrochemically assisted constructed wetland systems planted with Arundo donax were evaluated at applied voltages of 1, 2, 3 and 5 V. The RGR and Proline (Pro) results implied a positive response at the proper applied voltage. In the 3-V group, the RGR sharply climbed to a maximum over two stages, and the Pro reached a higher level of 256.25 μg/g at the end of the first stage without an additional organic carbon source. This result indicated that A. donax was attempting to adapt the 3-V stress via physiological self-regulation and the growth was nearly unaffected. However, in the 5-V group, the great increase in Pro and withering of the aboveground A. donax showed that the voltage stress had become lethal and the plant was not able to endure it through physiological regulation. In addition, Anodic microbial community compositions accumulating on graphite felts were analyzed via high-throughput sequencing. Results showed that there were two clear clusters at different applied voltages. One cluster was assembled from the anodic region of the 0-V and 1-V groups, and the other was collected from the 2-V and 3-V samples. At the phylum level, Proteobacteria, Firmicutes and Bacteroidetes were the most common phyla among the samples. However, at the genus level, the dominant genera varied with the applied voltage. The relative abundance of Desulfovibrio increased with increased applied voltage. The highest total nitrogen removal rate in the 2-V group was closely related to the high abundance of the Acinetobacter genus. Moreover, Exiguobacterium became dominant only in the 5-V sample, suggesting that this genus strongly depended on the interactive environment of exudes from A. donax and applied voltage.

High nitrate (NO3-) loading in water bodies is a crucial factor inducing the eutrophication of lakes. We tried to enhance NO3- reduction in overlying water by coupling sediment microbial fuel cells (SMFCs) with submerged aquatic plant Ceratophyllum demersum. A comparative study was conducted by setting four treatments: open-circuit SMFC (Control), closed-circuit SMFC (SMFC-c), open-circuit SMFC with C. demersum (Plant), and closed-circuit SMFC with C. demersum (P-SMFC-c). The electrochemical parameters were documented to illustrate the bio-electrochemical characteristics of SMFC-c and P-SMFC-c. Removal pathways of NO3- in different treatments were studied by adding quantitative 15NO3- to water column. The results showed that the cathodic reaction in SMFC-c was mainly catalyzed by aerobic organisms attached on the cathode, including algae, Pseudomonas, Bacillus, and Albidiferax. The oxygen secreted by plants significantly improved the power generation of SMFC-c. Both electrogenesis and plants enhanced the complete removal of NO3- from the sediment-water system. The complete removal rates of added 15N increased by 17.6% and 10.2% for SMFC-c and plant, respectively, when compared with control at the end of experiment. The electrochemical/heterotrophic and aerobic denitrification on cathodes mainly drove the higher reduction of NO3- in SMFC-c and plant, respectively. The coexistence of electrogenesis and plants further increased the complete removal of NO3- with a rate of 23.1%. The heterotrophic and aerobic denitrifications were simultaneously promoted with a highest abundance of Flavobacterium, Bacillus, Geobacter, Pseudomonas, Rhodobacter, and Arenimonas on the cathode.

To enhance nitrate removal in constructed wetlands (CWs), a bioelectrochemically-assisted CW (BECW) integrating a three-dimensional biofilm-electrode reactor (3D-BER) into the CW was evaluated for the effectiveness of combined autotrophic and heterotrophic denitrification in the presence of organic matter and applied current. The effects of COD/N ratios on nitrate removal were investigated, and the bacterial communities in the granular active carbon (GAC) and graphite felt (GF) in the reactor's cathode region were compared. The highest NO3--N and TN removal efficiencies of 91.3±7.2% and 68.8±7.9% were obtained at the COD/N ratio of 5. According to the results of high-throughput sequencing analysis, sample GAC was enriched with a high abundance of Pseudomonas (17.29%) capable of autotrophic and heterotrophic denitrification, whereas autotrophic bacteria Thiobacillus (43.94%) was predominant in sample GF. The synergy between heterotrophic and autotrophic denitrification bacteria is believed to cause the high and stable nitrogen removal performance.

Sediment internal nitrogen release is a significant pollution source in the overlying water of aquatic ecosystems. This study aims to remove internal nitrogen in sediment-water microcosms by coupling sediment microbial fuel cells (SMFCs) with submerged aquatic plants. Twelve tanks including four treatments in triplicates were designed: open-circuit (SMFC-o), closed-circuit (SMFC-c), aquatic plants with open-circuit (P-SMFC-o) and aquatic plants with closed-circuit (P-SMFC-c). The changes in the bio-electrochemical characteristics of the nitrogen levels in overlying water, pore water, sediments, and aquatic plants were documented to explain the migration and transformation pathways of internal nitrogen. The results showed that both electrogenesis and aquatic plants could facilitate the mineralization of organic nitrogen in sediments. In SMFC, electrogenesis promoted the release of ammonium from the pore water, followed by the accumulation of ammonium and nitrate in the overlying water. The increased redox potential of sediments due to electrogenesis also contributed to higher levels of nitrate in overlying water when nitrification in pore water was facilitated and denitrification at the sediment-water interface was inhibited. When the aquatic plants were introduced into the closed-circuit SMFC, the internal ammonium assimilation by aquatic plants was advanced by electrogenesis; nitrification in pore water and denitrification in sediments were also promoted. These processes might result in the maximum decrease of internal nitrogen with low nitrogen levels in the overlying water despite the lower power production. The P-SMFC-c reduced 8.1%, 16.2%, 24.7%, and 25.3% of internal total nitrogen compared to SMFC-o on the 55th, 82th, 136th, and 190th days, respectively. The smaller number of Nitrospira and the larger number of Bacillus and Pseudomonas on the anodes via high throughput sequencing may account for strong mineralization and denitrification in the sediments under closed-circuit. The coupled P-SMFC system has shown good potential for the efficient removal of internal nitrogen.

Six wetland plants were investigated for their effect on the degradation characteristics of chlorpyrifos in nonsterile hydroponic system at constant temperature of 28 degrees C. The results showed that the removal rates of chlorpyrifos in the water of plant systems were 1.265.56% higher than that in the control without plants. Scirpus validus and Typha angustifolia were better than other hygrophytes in elimination of chlorpyrifos. The removal rates of the two systems were up to 88%. Plants of acaulescent group had an advantage over caulescent group in removing chlorpyrifos. Phytoaccumulation of chlorpyrifos was observed, and the order of chlorpyrifos concentration in different plant tissues was root > stem > leaf. It was also found that chlorpyrifos and its metabolite TCP decreased rapidly at the initial step of the experiment.

An exploratory study on the management of undesirable cyanobacteria blooms with respect to off-flavor problems using an integrated vertical-flow constructed wetland (CW) was performed at a small commercial-scale channel catfish farm from 2004 to 2007. The results of the three-year experiment indicated that water treatment by the CW could reduce the possibility of dominance by undesirable cyanobacteria species that often cause off-flavor problems. A detailed investigation in 2007, showed that the concentrations of geosmin, MIB (2-methylisoborneol), and beta-cyclocitral in the water of the recirculating pond (4.3 ng L(-1), U.D. (undetected) and 0.2 ng L(-1), respectively) treated by the CW were significantly lower than those in the control pond (152.6 ng L(-1), 63.3 ng L(-1) and 254.8 ng L(-1), respectively). In addition, the relationships among the cyanobacteria species, the off-flavor compounds and ten environmental variables were explored by canonical correspondence analysis (CCA). The results showed that Oscillatoria sp., Oscillatoria kawamurae and Microcystis aeruginosa were the main sources of off-flavor compounds in the catfish ponds. The successful manipulation of undesirable cyanobacteria species potentially resulted in lower concentrations of odorous compounds in the water of the recirculating pond. An investigation of the concentrations of geosmin and MIB in catfish fillets showed that the levels of odorous compounds were below the OTC (odor threshold concentration) values in the recirculating pond but were above the OTC values from July to October in the control pond. Water recycling by the CW could potentially be one of the best management practices to control off-flavor occurrences in aquaculture. (C) 2011 Elsevier Ltd. All rights reserved.

This research aimed to investigate the phosphorus (P) removal of a series of laboratory-scale unvegetated vertical-flow constructed wetland systems using anthracite, steel slag and related blends as substrate in treatment of low concentration domestic sewage. The long-term performance of P removal was firstly studied by using single substrate of anthracite or steel slag, and three systems applying various combined substrates were investigated when the average P loading rate varied between 0.9 and 1.5 g TP/m2·d. The results demonstrated that both anthracite and steel slag systems were highly effective in removing total P (TP, 77.17 ± 23.34% and 90.26 ± 4.48%) and soluble reactive P (SRP, 92.14 ± 12.56% and 96.20 ± 2.58%). The system filled with anthracite, vermiculite and steel slag from the top down removed 82.45 ± 9.52% and 87.83 ± 8.58% of TP and SRP, respectively. However, other combined substrate systems showed comparative low and fluctuant P removal. The effluent pH was maintained at 7–9, which met environmental requirements of China. Therefore, anthracite provides a long-term high efficiency of P removal and may be a promising substrate from the standpoint of the effluent pH, and the arrangement of combined substrate has a prominent effect on P removal.

Low removal rate for total nitrogen (TN) is the main limitation of a membrane bioreactor (MBR). The effects of intermittent aeration on the removal of TN and the microbial community structure of activated sludge from a submerged membrane bioreactor (SMBR) operating at three different aeration on/off times (run 1, continuous aeration; run 2, 60/60 min aeration on/off time; and run 3, 60/75 min aeration on/off time) were studied. The results showed that the removal rates for TN under different operation conditions were 26.2% (run 1), 59.5% (run 2) and 70.7% (run 3), respectively, and significant improvements were achieved. Monounsaturated phospholipid fatty acids (PLFAs) and saturated PLFAs were dominant PLFA types in activated sludge, followed by branched PLFAs; cyclopropane fatty acid were relatively small in amount. The highest ratio of the characteristic fatty acid representing the abundance of bacteria in activated sludge was found in run 2. Aerobic prokaryotes were the predominant groups under all three operation conditions, followed by the anaerobic bacteria and the Gram-positive bacteria group; sulphate-reducing bacteria (SRB) and other anaerobic bacteria occupied the lowest proportion. Intermittent aeration can be used as a possible means to improve the treatment performance in an MBR.

Phosphorus is a crucial element in the eutrophication process. According to China’s water pollutant discharge Class 1A standard, treated wastewater must meet 0.5 mg/L of phosphorus prior to discharge to a sensitive water body. In recent years, wastewater treatment technologies such as membrane bioreactors have been demonstrated to achieve high-quality effluent and present the potential for wastewater reuse applications. However, an efficient and cost-effective phosphorus removal process is still not warranted. In this study, a submerged membrane bioreactor (SMBR) with addition of a low concentration of aluminum sulfate ([mol Al : mol P ≤ 1] was used to evaluate its treatment performance. The results showed that significant phosphorus removal could be achieved with addition of a low aluminum sulfate dosage to meet national phosphorus discharge standard; however, no significant effect was observed on the removal of COD and ammonia. The addition of a low concentration of aluminum sulfate could offer as an economical solution to increase the phos phorus removal efficiency of a SMBR, and thereby improve the water quality of the water bodies.

In order to improve removal for nitrogen in a pilot-scale submerged membrane bioreactor (SMBR), intermittent aeration was conducted, and the effect on the treatment performance under four kinds of operation condition (run 1, continuous aeration; run 2, 60/60 min aeration on/off time; run 3, 60/90 min aeration on/off time; run 4, 60/75 min aeration on/off time) was evaluated. The results showed that depending on the specific on/off of the aeration time ratio, removal efficiency of nitrogen could be improved significantly, and the removal rates of total nitrogen (TN) under different operation conditions were 28.0%, 59.5%, 66.8% and 70.7%, respectively. There were no obvious differences for removal rates for CODCr and ammonia among different operation conditions. In general, intermittent aeration could be used as a feasible way to improve treatment performance for nitrogen in the SMBR.

A new SMBR–IVCW system, which combined a submerged MBR (SMBR) unit and an integrated vertical-flow constructed wetland (IVCW) unit, was applied to treat the high strength integrated wastewater. The study showed that this system of biological and ecological combination was stable and good at improving the quality and efficiency of polishing wastewater. Six runs under different HRT combinations were carried out in order to obtain the better purification performance of the SMBR–IVCW system. The results indicated that the better HRT combination was 7.7 h for SMBR and 11.52 h for IVCW. In such condition, the concentrations of COD, ammonia and TP in the final effluent were 11.0, 0.086 and 0.44 mg L− 1, respectively, which reached the Class III of the national environmental quality standards for surface water in China. In fact, the HRT of the two units had great effect on the purification efficiency and investment cost. By regulating the ratio of HRT between these two units, the optimum operation conditions could be obtained to reach the double wins of high purification and low costs. In the SMBR–IVCW system, the SMBR unit acted as the secondary treatment, contributing to removing the organics and nitrification. While the IVCW unit was more like as the tertiary treatment, contributing to the denitrification and further dephosphorization.

The bacterial diversity of activated sludge from submerged membrane bioreactor (SMBR) was investigated. A 16S rDNA clone library was generated, and 150 clones were screened using restriction fragment length polymorphism (RFLP). Of the screened clones, almost full-length 16S rDNA sequences of 64 clones were sequenced. Phylogenetic tree was constructed with a database containing clone sequences from this study and bacterial rDNA sequences from NCB1 for identification purposes. The 90.6% of the clones were affiliated with the two phyla Bacteroidetes (50%) and Proteobacteria (40%), and beta-, -gamma-, and delta-Proteobacteria accounted for 7.8%, 28.1%, and 4.7%, respectively. Minor portions were affiliated with the Actinobacteria and Firmicutes (both 3.1%). Only 6 out of 64 16S rDNA sequences exhibited similarities of more than 97% to classified bacterial species, which indicated that a substantial fraction of the clone sequences were derived from unknown taxa. Rarefaction analysis of operational taxonomic units (orrUs) clusters demonstrated that 150 clones screened were still insufficient to describe the whole bacterial diversity. Measurement of water quality parameter demonstrated that performance of the SMBR maintained high level, and the SMBR system remained stable during this study.