Search

This paper presents a review concerning nondestructive testing by infrared thermography. The study includes articles by well-known researchers from around the world and Latin America. From a literature review, there is currently a growing trend in scientific production in this field. The above confirms its importance and the demand for constant development. The works found were organized into four scope lines: a. state of the art, b. thermal information processing techniques, c. performance metrics, and d. simulation, thermal models, and applications. In addition, the paper presents the traditional and emerging countries supporting the new developments in the nondestructive testing area. Finally, there is a trend towards processing thermal image sequences rather than single images where are reported few developments. The number of methods is increasing, and there is a reduced number of metrics for the quantitative performance evaluation. [ABSTRACT FROM AUTHOR]

Pulsed thermography is a nondestructive method commonly used to explore anomalies in composite materials. This paper presents a procedure for the automated detection of defects in thermal images of composite materials obtained with pulsed thermography experiments. The proposed methodology is simple and novel as it is reliable in low-contrast and nonuniform heating conditions and does not require data preprocessing. Nonuniform heating correction and the gradient direction information combined with a local and global segmentation phase are used to analyze carbon fiber-reinforced plastic (CFRP) thermal images with Teflon inserts with different length/depth ratios. Additionally, a comparison between the actual depths and estimated depths of detected defects is performed. The performance of the nonuniform heating correction proposed method is superior to that obtained on the same CFRP sample analyzed with a deep learning algorithm and the background thermal compensation by filtering strategy.

The monitoring of heritage objects is necessary due to their continuous deterioration over time. Therefore, the joint use of the most up-to-date inspection techniques with the most innovative data processing algorithms plays an important role to apply the required prevention and conservation tasks in each case study. InfraRed Thermography (IRT) is one of the most used Non-Destructive Testing (NDT) techniques in the cultural heritage field due to its advantages in the analysis of delicate objects (i.e., undisturbed, non-contact and fast inspection of large surfaces) and its continuous evolution in both the acquisition and the processing of the data acquired. Despite the good qualitative and quantitative results obtained so far, the lack of automation in the IRT data interpretation predominates, with few automatic analyses that are limited to specific conditions and the technology of the thermographic camera. Deep Learning (DL) is a data processor with a versatile solution for highly automated analysis. Then, this paper introduces the latest state-of-the-art DL model for instance segmentation, Mask Region-Convolution Neural Network (Mask R-CNN), for the automatic detection and segmentation of the position and area of different surface and subsurface defects, respectively, in two different artistic objects belonging to the same family: Marquetry. For that, active IRT experiments are applied to each marquetry. The thermal image sequences acquired are used as input dataset in the Mask R-CNN learning process. Previously, two automatic thermal image pre-processing algorithms based on thermal fundamentals are applied to the acquired data in order to improve the contrast between defective and sound areas. Good detection and segmentation results are obtained regarding state-of-the-art IRT data processing algorithms, which experience difficulty in identifying the deepest defects in the tests. In addition, the performance of the Mask R-CNN is improved by the prior application of the proposed pre-processing algorithms.

This paper presents a thermal imaging dataset from composite material samples (carbon and glass fiber reinforced plastic) that were inspected by pulsed thermography with the goal of detecting and characterizing subsurface defective zones (Teflon inserts representing delaminations between plies). The pulsed thermography experiment was applied to 6 academic plates (inspected from both sides) all having the dimensions of 300 mm x 300 mm x 2 mm and same distribution of defects but made of different materials: three plates on carbon fiber-reinforced plastic (CFRP) and three plates made on glass fiber reinforced plastic (GFRP) specimens with three different geometries: planar, curved and trapezoidal. Each plate contains 25 inserts having length/depth ratios between 1.7 and 75. Two FX60 BALCAR photographic flashes (6.2 kJ per flash) were used to generate the heat pulse (2 ms duration), an X6900 FLIR infrared camera using ResearchIR software to record the thermal images and a custom-built software/control unit to synchronize data recording with pulse generation. Finally, the dataset proposed consists of 12 sequences of approximately 2000 images of 512 × 512 pixels each., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships which have, or could be perceived to have, influenced the work reported in this article., (© 2020 The Author(s).)

This paper presents a new, to the best of our knowledge, methodology for the thermal compensation of background heating in thermograms of composites. The technique analyzes the spatial data of the thermal images obtained from a pulsed thermography inspection and automatically calculates the optimal parameters of a predefined objective function. These parameters are obtained by curve fitting using the least squares method and model the temperature distribution of the image background using the proposed objective function. To verify the methodology, we use real and synthetic images of a sample of carbon-fiber-reinforced plastic (CFRP) with defects, with diameter/depth ratios that range between 15.0 and 75.0 and between 1.7 and 90.0, respectively. The performance of the method is tested using a local and a global definition of the signal-to-noise ratio (SNR) and is statistically validated by analysis of variance. The average performance values obtained were 55.0dB and 7.0dB on synthetic images and real images, respectively. The proposed method provides superior and statistically significant differences compared to techniques reported in the literature for contrast enhancement [e.g., differential absolute contrast (DAC) and background thermal compensation by filtering (BTCF)]. Unlike contrast normalization (CN), the proposed technique stands out since it does not need to predefine variables, select reference regions, have prior knowledge of the partial (or complete) state of the material, or analyze totally (or partially) the temporal evolution of the temperature or any characteristic derived from it.

This paper presents a new methodology for the automatic detection of defective regions of interest (d-ROI) in thermal images of composite materials. The images are acquired with pulsed thermography, and local histograms of oriented gradients are obtained by thermogram processing. This information is analyzed using a simple strategy to differentiate the material background from the defective areas. The procedure is independent of image contrast or enhancement; it does not require analysis of a complete sequence of images, nor does it involve heat transfer models or the extraction of nonuniform heating information. The methodology is tested with synthetic images of a carbon fiber-reinforced plastic sample, containing diameter/depth ratio defects with different values (between 150 and 0.56). The performance of the d-ROI detection method is validated using the area under the ROC curve (AUC) measure, generally obtaining a maximum average value of 0.949 with variations between 0.891 and 0.993 for all the defective depth and size conditions studied. In addition, this method is highly robust when detecting defects in 48.84% of the total number of images, as determined by the sequences analyzed with AUC values higher than 0.95. Outside the high detectability index range, the AUC performance increases abruptly and decays gradually. Recent literature proposes automatic detection of defects in thermograms yielding similar performances to those obtained with the proposed method; however, they require preprocessing of all the thermograms to improve image contrast and visibility and to attenuate the adverse effect of nonuniform heating, which affects the implementation complexity and the computational cost.