Search

Purpose of Review As reverse total shoulder arthroplasty indications have expanded and the incidence of its use has increased, developments in implant design have been a critical component of its success. The purpose of this review is to highlight the recent literature regarding the effect of implant design on reverse total shoulder arthroplasty biomechanics. Recent Findings Implant design for reverse total shoulder arthroplasty has evolved considerably from the modern design developed by Paul Grammont. The Grammont design had a medialized center of rotation and distalized humerus resulting from a 155° humeral neck shaft angle. These changes intended to decrease the forces on the glenoid component, thereby decreasing the risk for implant loosening and improving the deltoid moment arm. However, these features also led to scapular notching. The Grammont design has been modified over the last 20 years to increase the lateral offset of the glenosphere and decrease the prosthetic humeral neck shaft angle to 135°. These changes were made to optimize functional range of motion while minimizing scapular notching and improving active external rotation strength. Lastly, the introduction of preoperative planning and patient-specific instrumentation has improved surgeon ability to accurately place implants and optimize impingement-free range of motion. Summary Success and durability of the reverse total shoulder arthroplasty has been contingent upon changes in implant design, starting with the Grammont-style prosthesis. Current humeral and glenoid implant designs vary in parameters such as humeral and glenoid offset, humeral tray design, liner thickness, and neck-shaft angle. A better understanding of the biomechanical implications of these design parameters will allow us to optimize shoulder function and minimize implant-related complications after reverse total shoulder arthroplasty.

Background Magnetic resonance imaging (MRI) is standard of care for rotator cuff evaluation, with clinical interpretation usually limited to qualitative judgments. The reliability of MRI-based measurements and scoring systems has been evaluated only preoperatively or ≥6 months following rotator cuff repair, when repairs are in the later stages of healing. This study describes the MRI assessments and inter-rater agreement of various rotator cuff tendon and muscle parameters evaluated preoperatively and 4 times during the first postoperative year. Methods Two musculoskeletal radiologists independently assessed MRI scans of 42 patients preoperatively and 3, 12, 26, and 52 weeks after rotator cuff repair. Using standardized reading rules, readers assessed tendon integrity (5-point Sugaya classification), tear dimensions, muscle fat (5-point Goutallier classification) and atrophy (4-point Warner classification), muscle cross-sectional areas, and myotendinous junction distance. Raw exact agreement proportions, κ statistics, and correlation coefficients were used to quantify inter-rater agreement. Results Readers showed moderate to substantial above-chance agreement in scoring rotator cuff tendon integrity and supraspinatus muscle atrophy and good to excellent agreement on tear dimensions and muscle cross-sectional areas but only fair to moderate agreement for fatty infiltration and myotendinous junction distance. Only fatty infiltration grades evidenced observer bias. Inter-rater agreement did not appear time dependent. Conclusion By use of defined reading rules in a research setting, MRI evaluations of rotator cuff tendon integrity, tear dimensions, muscle atrophy, and cross-sectional areas have reasonable reliability at all time points in the first postoperative year. However, the presence of clinically significant disagreements, even in such favorable circumstances, indicates the need for improved imaging tools for precise rotator cuff evaluation.

Acromial (ASF) and scapular spine (SSF) stress fractures are well-recognized complications of reverse shoulder arthroplasty (RSA), but much of the current data are derived from single-center or single-implant studies with limited generalizability. This study from the American Shoulder and Elbow Surgeons (ASES) Complications of Reverse Shoulder Arthroplasty Multicenter Research Group determined the incidence of ASF/SSF after RSA and identified preoperative patient characteristics associated with their occurrence.Fifteen institutions including 21 ASES members across the United States participated in this study. Patients undergoing either primary or revision RSA between January 2013 and June 2019 with a minimum 3-month follow-up were included. All definitions and inclusion criteria were determined using the Delphi method, an iterative survey process involving all primary investigators. Consensus was achieved when at least 75% of investigators agreed on each aspect of the study protocol. Only symptomatic ASF/SSF diagnosed by radiograph or computed tomography were considered. Multivariable logistic regression was performed to identify factors associated with ASF/SSF development.We identified 6755 RSAs with an average follow-up of 19.8 months (range, 3-94). The total stress fracture incidence rate was 3.9% (n = 264), of which 3.0% (n = 200) were ASF and 0.9% (n = 64) were SSF. Fractures occurred at an average 8.2 months (0-64) following RSA with 21.2% (n = 56) following a trauma. Patient-related factors independently predictive of ASF were chronic dislocation (odds ratio [OR] 3.67, P = .04), massive rotator cuff tear without arthritis (OR 2.51, P.01), rotator cuff arthropathy (OR 2.14, P.01), self-reported osteoporosis (OR 2.21, P.01), inflammatory arthritis (OR 2.18, P.01), female sex (OR 1.51, P = .02), and older age (OR 1.02 per 1-year increase, P = .02). Factors independently associated with the development of SSF included osteoporosis (OR 2.63, P.01), female sex (OR 2.34, P = .01), rotator cuff arthropathy (OR 2.12, P = .03), and inflammatory arthritis (OR 2.05, P = .03).About 1 in 26 patients undergoing RSA will develop a symptomatic ASF or SSF, more frequently within the first year of surgery. Our results indicate that severe rotator cuff disease may play an important role in the occurrence of stress fractures following RSA. This information can be used to counsel patients about potential setbacks in recovery, especially among older women with suboptimal bone health. Strategies for prevention of ASF and SSF in these at-risk patients warrant further study. A follow-up study evaluating the impact of prosthetic factors on the incidence rates of ASF and SSF may prove highly valuable in the decision-making process.

Background Surgical site infections (SSI) are relatively uncommon, but can be debilitating complications following shoulder arthroplasty. Infections can result in further complications including sepsis and revision surgery. Methods The National Surgical Quality Improvement Program database was queried for all total and reverse total shoulder arthroplasty cases (Current Procedural Terminology code 23472) between 2012 and 2015 yielding 8438 total cases. The outcome of interest was 30-day SSI incidence, defined as a superficial and/or deep wound infection. The infection incidence for each year was calculated. Results The total number of primary shoulder arthroplasties increased from 2012 to 2015 (1191 to 3227; 271% increase). Over the 4-year study period, the incidence of SSIs following TSA was 0.40%. A downward trend in SSI rates was observed over time. An inverse relationship between SSI rates and year of surgery (R2−0.17) was observed; however, this was not statistically significant (P> .05). Infection rates in 2015 decreased by 48% when compared to 2012 (0.31 vs. 0.50%, P> .05). A larger decrease in SSI rate (76%) was noted between 2015 and 2013 (0.31 vs. 0.69%, P> .05). Conclusion SSI rates following shoulder arthroplasty declined from 2012 to 2015 by 48%. There was an inverse relationship between SSI rate and year of surgery, with the lowest infection rate found to be in the most recent year studied. It is hoped that continued measures will further promulgate these downward trends of these devastating complications. Level of Evidence Level IV; Retrospective Case Series

Transthyretin cardiac amyloidosis (ATTR-CA) is a restrictive cardiomyopathy that has been associated with multiple orthopedic pathologies years before it manifests in the heart. There have been no studies on the prevalence of a wide range of shoulder pathologies in patients with cardiac amyloidosis (CA). Due to the preferential deposition of transthyretin in the soft tissues and joints, we predicted a greater prevalence of shoulder pathologies and other orthopedic manifestations in patients with ATTR-CA. This single-center, retrospective, case-control study, analyzed 1,310 patients with CA, 830 with ATTR-CA, and 480 with light-chain CA (AL-CA) from a dedicated CA REDcap database. Odds ratios comparing patients with CA to the age-matched published estimate of over 300 million patients in the general population were determined for shoulder, hip, and knee arthroplasty. Years between a patient's first shoulder pathology (i.e., shoulder arthroplasty) and the year of their diagnosis with CA were determined using data from patients with a known date of surgery. Overall, patients with ATTR-CA compared with patients with AL-CA presented more frequently with shoulder pathologies (p0.001) and at least 1 orthopedic manifestation (p0.001). The odds of patients with ATTR-CA and AL-CA aged 60 years or older who underwent shoulder arthroplasty was 6.05 times greater (95% confidence interval 4.26 to 8.60) and 1.63 times greater (95% confidence interval 0.67 to 3.94), respectively, compared with age-matched controls. Shoulder pathologies and concomitant orthopedic pathologies are common in patients with ATTR-CA and may help identify patients with CA earlier in their disease progression for earlier intervention and treatment.

BACKGROUND: Posterior glenoid bone loss is commonly associated with primary glenohumeral osteoarthritis. Surgical management of bone loss in anatomic total shoulder arthroplasty (aTSA) remains controversial. We studied the use of a stepped augmented glenoid component for management of Walch B2 and B3 glenoids and compared the radiographic and clinical outcomes at short-term follow-up with those achieved with a non-augmented component of the same design in Walch A1 glenoids. METHODS: Ninety-two patients (42 A1, 29 B2, and 21 B3 glenoids) were prospectively followed after aTSA. Sequential 3-dimensional (3D) computed tomography (CT) imaging was performed preoperatively, within 3 months postoperatively with metal artifact reduction (MAR) to define implant position, and at a minimum of 2 years postoperatively with MAR. Scapular 3D registration with implant registration allowed 3D measurement of glenoid implant position, implant shift, and central peg osteolysis (CPO). RESULTS: CPO with or without implant shift occurred in a higher percentage of B3 glenoids treated with the augmented glenoid component (29%) than A1 glenoids treated with a standard component (5%) (p = 0.028). There was no significant difference in the frequency of CPO between B2 glenoids with the augmented component (10%) and A1 glenoids with the standard component. There was no difference in postoperative glenoid component version and inclination between groups. B3 glenoids were associated with more component medialization relative to the premorbid joint line compared with A1 and B2 glenoids (p < 0.001). CONCLUSIONS: A stepped augmented glenoid component can restore premorbid glenoid anatomy in patients with asymmetric biconcave glenoid bone loss (Walch B2), with short-term clinical and radiographic results equivalent to those for patients without glenoid bone loss (Walch A1) treated with a non-augmented component. There is a greater risk of CPO in patients with moderate-to-severe B3 glenoid pathology with this stepped augmented glenoid component. Longer follow-up will help define the clinical implications of CPO over time. LEVEL OF EVIDENCE: Therapeutic Level II. See Instructions for Authors for a complete description of levels of evidence.

Glenoid component loosening is a common cause of failure after anatomic total shoulder arthroplasty. Prior studies of all-polyethylene glenoid implants with hybrid fixation did not show early glenoid radiolucency to be clinically significant. The purpose of this study was to determine the clinical significance of progression of radiolucency around the central peg of the glenoid component.We identified 73 shoulders that underwent primary anatomic total shoulder arthroplasty between January 1995 and May 2015 for osteoarthritis with an all-polyethylene pegged glenoid, with a minimum follow-up interval of 2 years between early and late follow-up. Demographic, radiographic (central-peg osteolysis [CPO] and central-peg grading [CPG]), and outcome variables comprising the Penn Shoulder Score (PSS) and revision surgery were collected. Clinical failure was defined as a PSS decrease11.4 points (ie, PSS failure) or revision surgery.The average patient age at surgery was 65 ± 7 years, and 63% of patients were men. The median initial follow-up period was 14 months (interquartile range, 12-25 months), and the final median follow-up period was 56 months (interquartile range, 47-69 months). Revision surgical procedures were performed in 4 patients, and 17 PSS failures occurred. We found that CPO at final follow-up, CPG progression, and worse PSS at follow-up were associated with revision surgery (P.05). We also found younger age at surgery, CPO at final follow-up, CPG progression, and greater glenoid component retroversion at final follow-up to be associated with clinical failure (PSS failure or revision surgery) (P.05). Multivariate analysis found only CPG progression to be associated with clinical failure (P.001).CPO and CPG progression were associated with clinical failure, defined as decreasing clinical outcome scores or revision surgery.

Background Variations in glenoid morphology affect surgical treatment and outcome of advanced glenohumeral osteoarthritis (OA). The purpose of this study was to assess the inter- and intraobserver reliability of the modified Walch classification using 3-dimensional (3D) computed tomography (CT) imaging in a multicenter research group. Methods Deidentified preoperative CTs of patients with primary glenohumeral OA undergoing anatomic or reverse total shoulder arthroplasty (TSA) were reviewed with 3D imaging software by 23 experienced shoulder surgeons across 19 institutions. CTs were separated into 2 groups for review: group 1 (96 cases involving all modified Walch classification categories evaluated by 12 readers) and group 2 (98 cases involving posterior glenoid deformity categories [B2, B3, C1, C2] evaluated by 11 readers other than the first 12). Each case group was reviewed by the same set of readers 4 different times (with and without the glenoid vault model present), blindly and in random order. Inter- and intraobserver reliabilities were calculated to assess agreement (slight, fair, moderate, substantial, almost perfect) within groups and by modified Walch classification categories. Results Interobserver reliability showed fair to moderate agreement for both groups. Group 1 had a kappa of 0.43 (95% confidence interval [CI]: 0.38, 0.48) with the glenoid vault model absent and 0.41 (95% CI: 0.37, 0.46) with it present. Group 2 had a kappa of 0.38 (95% CI: 0.33, 0.43) with the glenoid vault model absent and 0.37 (95% CI: 0.32, 0.43) with it present. Intraobserver reliability showed substantial agreement for group 1 with (0.63, range 0.47-0.71) and without (0.61, range 0.52-0.69) the glenoid vault model present. For group 2, intraobserver reliability showed moderate agreement with the glenoid vault model absent (0.51, range 0.30-0.72), which improved to substantial agreement with the glenoid vault model present (0.61, range 0.34-0.87). Discussion Inter- and intraobserver reliability of the modified Walch classification were fair to moderate and moderate to substantial, respectively, using standardized 3D CT imaging analysis in a large multicenter study. The findings potentially suggest that cases with a spectrum of posterior glenoid bone loss and/or dysplasia can be harder to distinguish by modified Walch type because of a lack of defined thresholds, and the glenoid vault model may be beneficial in determining Walch type in certain scenarios. The ability to reproducibly separate patients into groups based on preoperative pathology, including Walch type, is important for future studies to accurately evaluate postoperative outcomes in TSA patient cohorts.

Hypothesis/Purpose The objective is to develop and validate an artificial intelligence model, specifically an artificial neural network (ANN), to predict length of stay (LOS), discharge disposition, and inpatient charges for primary anatomic total (aTSA), reverse total (rTSA), and hemi- (HSA) shoulder arthroplasty to establish internal validity in predicting patient-specific value metrics. Methods Using data from the National Inpatient Sample between 2003 and 2014, 4 different ANN models to predict LOS, discharge disposition, and inpatient costs using 39 preoperative variables were developed based on diagnosis and arthroplasty type: primary chronic/degenerative aTSA, primary chronic/degenerative rTSA, primary traumatic/acute rTSA, and primary acute/traumatic HSA. Models were also combined into diagnosis type only. Outcome metrics included accuracy and area under the curve (AUC) for a receiver operating characteristic curve. Results A total of 111,147 patients undergoing primary shoulder replacement were included. The machine learning algorithm predicting the overall chronic/degenerative conditions model (aTSA, rTSA) achieved accuracies of 76.5%, 91.8%, and 73.1% for total cost, LOS, and disposition, respectively; AUCs were 0.75, 0.89, and 0.77 for total cost, LOS, and disposition, respectively. The overall acute/traumatic conditions model (rTSA, HSA) had accuracies of 70.3%, 79.1%, and 72.0% and AUCs of 0.72, 0.78, and 0.79 for total cost, LOS, and discharge disposition, respectively. Conclusion Our ANN demonstrated fair to good accuracy and reliability for predicting inpatient cost, LOS, and discharge disposition in shoulder arthroplasty for both chronic/degenerative and acute/traumatic conditions. Machine learning has the potential to preoperatively predict costs, LOS, and disposition using patient-specific data for expectation management between health care providers, patients, and payers.

To determine whether a simulated low-dose metal artifact reduction (MAR) CT technique is comparable with a clinical dose MAR technique for shoulder arthroplasty evaluation. Two shoulder arthroplasties in cadavers and 25 shoulder arthroplasties in patients were scanned using a clinical dose (140 kVp, 300 qrmAs); cadavers were also scanned at half dose (140 kVp, 150 qrmAs). Images were reconstructed using a MAR CT algorithm at full dose and a noise-insertion algorithm simulating 50% dose reduction. For the actual and simulated half-dose cadaver scans, differences in SD for regions of interest were assessed, and streak artifact near the arthroplasty was graded by 3 blinded readers. Simulated half-dose scans were compared with full-dose scans in patients by measuring differences in implant position and by comparing readers’ grades of periprosthetic osteolysis and muscle atrophy. The mean difference in SD between actual and simulated half-dose methods was 2.42 HU (95% CI [1.4, 3.4]). No differences in streak artifact grades were seen in 13/18 (72.2%) comparisons in cadavers. In patients, differences in implant position measurements were within 1° or 1 mm in 149/150 (99.3%) measurements. The inter-reader agreement rates were nearly identical when readers were using full-dose (77.3% [232/300] for osteolysis and 76.9% [173/225] for muscle atrophy) and simulated half-dose (76.7% [920/1200] for osteolysis and 74.0% [666/900] for muscle atrophy) scans. A simulated half-dose MAR CT technique is comparable both quantitatively and qualitatively with a standard-dose technique for shoulder arthroplasty evaluation, demonstrating that this technique could be used to reduce dose in arthroplasty imaging.

Introduction There is no current standard by which culture specimens from revision shoulder arthroplasty should be handled, processed, cultured, and reported. Due to the relatively low numbers of cases multicenter study may provide information to form consensus recommendations. However, assimilation of multicenter data requires comparable methodologies. The objective of this study was to document and evaluate the extent of variability between surgeons and institutions. Methods An 11-question survey was sent to 20 shoulder surgeons as part of the American Shoulder and Elbow Society (ASES) Periprosthetic Joint Infection (PJI) Multicenter Workgroup. Questions addressed how samples are handled in the operating room by surgeons, processing of tissue samples and explants by laboratories, number of media, culture incubation durations, and culture reporting. Results Common practices regarding specimen handling and processing were identified including prolonged culture incubation times >13 days (94% of participants). However, substantial variation in handling of tissue and explant specimens, number and type of media used, and reporting of results were identified. The majority of surgeons reported using a sterile instrument to harvest each individual tissue specimen (10/17, 59%), more so than using any available instrument (4/17, 24%) or washing and re-using the same instrument (3/17, 18%). Half of the institutions require a time limit by which samples must be processed in the laboratory (8/16, 50%). Nine institutions (9/16, 56%) report cultures in a semi-quantitative manner, while 7 (44%) report cultures in a binary fashion. Five institutions reported having performed a negative control study, and the rate of positive cultures ranged between 0% and 17%. The majority of positive cultures from the negative controls contained Cutibacterium (92%). Discussion Specimen handling, processing, culturing, and reporting varies widely between institutions. Due to the risk of false positives as demonstrated by negative control studies, surgeons should be cognizant of potential sources of contamination at the specimen handling level in the operating room and specimen processing level in the laboratory. Given the challenges in interpretation of positive cultures in revision shoulder arthroplasty, further studies are needed to determine whether assimilation of data across institutions is acceptable or whether a standard culturing methodology across institutions is necessary. Level of Evidence: V

Periprosthetic joint infection (PJI) of the shoulder is a potentially devastating complication following shoulder arthroplasty. It is important to review the workup of PJI in the shoulder, including recently developed diagnostic criteria for shoulder PJI, along with detailed examination of the most common causative organism

Background The purpose of this study was to demonstrate the validity and efficiency of the Outcomes Management and Evaluation (OME) system, a prospectively designed electronic data collection tool, for collecting comprehensive and standardized surgical data in shoulder arthroplasty. Methods Surgical data from the first 100 cases of shoulder arthroplasty that were collected into the OME database were analyzed. Surgeons completed a traditional narrative operative note and also an OME case report using an encrypted smartphone. A blinded reviewer extracted data from the operative notes and implant logs in the electronic medical records (EMR) by manual chart review. OME and EMR data were compared with regard to data counts and agreement between 39 variables related to preoperative pathology, including rotator cuff status and glenoid wear, and surgical procedures. Data counts were assessed using both raw percentages and with McNemar's test (with continuity correction). Agreement of nominal variables was analyzed using Cohen's unweighted kappa (κ) and of ordinal variables using the linearly weighted Cohen's test. Efficiency was assessed by calculating the median time needed to complete OME. Results Compared to the EMR, the OME database had significantly higher data counts for 56% (22 of 39) of the variables assessed. A high level of proportional and statistical agreement was demonstrated between the data in the two datasets. 10 of 39 variables had 100% agreement but could not be statistically compared because both datasets had the same single response under those variables. Among the 29 variables that were compared, 79% (23 of 29) of variables had >80% raw proportional agreement, and 69% (20 of 29) of variables showed at least substantial agreement (κ > 0.6). The median time for completing OME surgery data entry was 92 seconds (IQR 70 – 126). Conclusion The prospectively designed, electronic data entry system (OME) is an efficient and valid tool for collecting comprehensive and standardized surgical data on shoulder arthroplasty. Level of Evidence Level IV

Deep tissue culture specimens obtained at the time of revision shoulder arthroplasty are commonly positive for Cutibacterium. Clinical interpretation of positive cultures can be difficult. This was a multi-institutional study evaluating the accuracy of cultures for Cutibacterium using positive control (PC) and negative control (NC) samples. The relationship between time to culture positivity and strength of culture positivity was also studied.Eleven different institutions were each sent 12 blinded samples (10 PC and 2 NC samples). The 10 PC samples included 2 sets of 5 different dilutions of a Cutibacterium isolate from a failed total shoulder arthroplasty with a probable periprosthetic infection. At each institution, the samples were handled as if they were received from the operating room. Specimen growth, time to culture positivity, and strength of culture positivity (based on semiquantitative assessment) were reported.A total of 110 PC samples and 22 NC samples were tested. One hundred percent of specimens at the 4 highest dilutions were positive for Cutibacterium. At the lowest dilution, 91% of samples showed positive findings. Cutibacterium grew in 14% of NC samples. Cutibacterium grew in PC samples at an average of 4.0 ± 1.3 days, and all of these samples showed growth within 7 days. The time to positivity was significantly shorter (P .001) and the strength of positivity was significantly higher (P .001) in true-positive cultures compared with false-positive cultures.This multi-institutional study suggests that different institutions may report highly consistent rates of culture positivity for revision shoulder arthroplasty samples with higher bacterial loads. In contrast, with lower bacterial loads, the results are somewhat less consistent. Clinicians should consider using a shorter time to positivity and a higher strength of positivity as adjuncts in determining whether a tissue culture sample is a true positive.

Background The purpose of this study was to evaluate glenoid component position and radiolucency following anatomic total shoulder arthroplasty (TSA) using sequential 3-dimensional computed tomography (3D CT) analysis. Methods In a series of 152 patients (42 Walch A1, 16 A2, 7 B1, 49 B2, 29 B3, 3 C1, 3 C2, and 3 D glenoids) undergoing anatomic TSA with a polyethylene glenoid component, sequential 3D CT analysis was performed preoperatively (CT1), early postoperatively (CT2), and at a minimum 2-year follow-up (CT3). Glenoid component shift was defined as a change in component version or inclination of ≥3° from CT2 to CT3. Glenoid component central anchor peg osteolysis (CPO) was assessed at CT3. Factors associated with glenoid component shift and CPO were evaluated. Results Glenoid component shift occurred from CT2 to CT3 in 78 (51%) of the 152 patients. CPO was seen at CT3 in 19 (13%) of the 152 patients, including 15 (19%) of the 78 with component shift. Walch B2 glenoids with a standard component and glenoids with higher preoperative retroversion were associated with a higher rate of shift, but not of CPO. B3 glenoids with an augmented component and glenoids with greater preoperative joint-line medialization were associated with CPO, but not with shift. More glenoid component joint-line medialization from CT2 to CT3 was associated with higher rates of shift and CPO. A greater absolute change in glenoid component inclination from CT2 to CT3 and a combined absolute glenoid component version and inclination change from CT2 to CT3 were associated with CPO. Neither glenoid component shift nor CPO was associated with worse clinical outcomes. Conclusions Postoperative 3D CT analysis demonstrated that glenoid component shift commonly occurs following anatomic TSA, with increased inclination the most common direction. Most (81%) of the patients with glenoid component shift did not develop CPO. Longer follow-up is needed to determine the relationships of glenoid component shift and CPO with loosening over time. Level of evidence Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Combined tears of the anterior, posterior, and superior glenoid labrum have not been commonly reported in the literature. These lesions represent a small, but significant portion of labral injuries. Care should be taken in the diagnosis and management of these lesions because preoperative physical examination and imaging may have limited ability to detect the full extent of pathology. Arthroscopic repair of panlabral tears produces good to excellent outcomes and a low rate of recurrent instability at short-term follow-up, both when performed in the beach chair position and in the lateral decubitus position. Surgical positioning, therefore, should be based on surgeon preference.

Background Use of 3-dimensional (3D) computed tomography (CT) preoperative planning and patient-specific instrumentation has been demonstrated to improve the accuracy of glenoid implant placement in total shoulder arthroplasty (TSA). The purpose of this study was to compare the accuracy of glenoid implant placement in primary TSA among different types of instrumentation used with the 3D CT preoperative planning. Methods One hundred and seventy-three patients with end-stage glenohumeral arthritis were enrolled in 3 prospective studies evaluating patient-specific instrumentation and 3D preoperative planning. All patients underwent preoperative 3D CT planning to determine optimal glenoid component and guide pin position based on surgeon preference. Patients were placed into 1 of 5 instrument groups used for intraoperative guide pin placement: (1) standard instrumentation, (2) standard instrumentation combined with use of a 3D glenoid bone model containing the guide pin, (3) use of the 3D glenoid bone model combined with single-use patient-specific instrumentation, (4) use of the 3D glenoid bone model combined with reusable patient-specific instrumentation, and (5) use of reusable patient-specific instrumentation with an adjustable, reusable base. Postoperatively, all patients underwent 3D CT to compare actual versus planned glenoid component position. Deviation from the plan (in terms of orientation and location) was compared across groups on the basis of absolute differences and outlier analysis. Univariable and multivariable comparisons were performed. As the initial analyses showed no significant differences in preoperative factors or in deviation from the plan between Groups 1 and 2 or between Groups 4 and 5 across studies, the final analysis was across 3 major treatment groups: standard instrumentation (Groups 1 and 2), single-use patient-specific instrumentation (Group 3), and reusable patient-specific instrumentation (Groups 4 and 5). Results In nearly all comparisons, there were no significant differences in the deviation from the plan (absolute differences or outlier frequency) for glenoid implant orientation or location across the 3 major treatment groups. Conclusions This study did not demonstrate that any type of patient-specific instrumentation resulted in consistent differences in accuracy of glenoid implant placement in primary TSA with 3D CT preoperative planning. Surgeons have multiple patient-specific instrumentation options available for improving accuracy of glenoid implant placement when compared with 2D imaging without patient-specific instrumentation. Level of evidence Therapeutic Level II. See Instructions for Authors for a complete description of levels of evidence.

BACKGROUND: The factors that associate with surgical decisions about repair technique and the number of suture anchors used in rotator cuff repair have not been previously investigated. The purpose of this study was to investigate the extent to which patient and surgical factors, including surgeon, associate with performing single-vs. double-row repair technique and ultimately with the number of suture anchors used. METHODS: This study queried our institution’ sprospective surgical cohort for patients undergoing suture anchor repair of superior-posterior rotator cuff tendon tears between February 2015 and August 2017. Exclusion criteria were patients with isolated subscapularis tears, tears that were not repaired, repairs without suture anchors, repairs involving graft augmentation, and repairs by surgeons with less than 10 cases. Multivariable statistical modeling was used to investigate associations between patient and surgical factors and the choice of repair technique and number of suture anchors used. RESULTS: 925 cases performed by 13 surgeons met inclusion criteria. Tear type (full thickness), tear size (medium, large and massive), a greater number of torn tendons, repair type (arthroscopic), and surgeon were significantly associated with performing a double-row over a single-row repair. Tear size, a greater number of torn tendons, double-row repair technique, and surgeon were significantly associated with a greater number of anchors used for repair. CONCLUSION: Our findings suggest that in the absence of data to conclusively support a clinical benefit of one repair technique over another, the surgeons’ training, experience and/or inherent practice patterns, become the primary factors that define their surgical methods. LEVEL OF EVIDENCE: Level III; Cross-Sectional Design; Epidemiology Study

Glenoid component loosening remains a common complication following anatomic total shoulder arthroplasty (TSA); however, plain radiographs are unable to accurately detect early implant migration. The purpose of this study was to validate the accuracy of a method of postoperative, three-dimensional (3D) computed tomography (CT) imaging with metal artifact reduction (MAR) to detect glenoid component migration following anatomic TSA. Tantalum bead markers were inserted into polyethylene glenoid components for implant detection on 3D CT. In-vitro validation was performed using a glenoid component placed into a scapula sawbone and incrementally translated and rotated, with MAR 3D CT acquired at each test position. Accuracy was evaluated by root mean square error (RMSE). In-vivo validation was performed on six patients who underwent anatomic TSA, with two postoperative CT scans acquired in each patient and marker-based radiostereometric analysis (RSA) performed on the same days. Glenoid component migration was calculated relative to a scapular coordinate system for both MAR 3D CT and RSA. Accuracy was evaluated by RMSE and paired Student's t-tests. The largest RMSE on in-vitro testing was 0.24 mm in translation and 0.11° in rotation, and on in-vivo testing was 0.47 mm in translation and 1.04° in rotation. There were no significant differences between MAR 3D CT and RSA measurement methods. MAR 3D CT imaging is capable of quantifying glenoid component migration with a high level of accuracy. MAR 3D CT imaging is advantageous over RSA because it is readily available clinically and can also be used to evaluate the implant-bone interface.

Background To address the need for more objective and quantitative measures of tendon healing in research studies, we intend to use computed tomography (CT) with implanted radiopaque markers on the repaired tendon to measure tendon retraction following rotator cuff repair. In our small prior study, retraction at 1-year follow-up averaged 16.1± 5.3 mm and exceeded 10.0 mm in 12 of 13 patients, and thus tendon retraction appears to be a common clinical phenomenon. This study's objectives were to assess, using 5 longitudinal CT scans obtained over 1 year following rotator cuff repair, the variability in glenohumeral positioning because of pragmatic variations in achieving perfect arm repositioning and to estimate the associated measurement variability in bone-to-tendon marker length measurements. Methods Forty-eight patients underwent rotator cuff repair with intraoperative placement of radiopaque tendon markers at the repair site. All patients had a CT scan with their arms at the side on the day of surgery and at 3, 12, 26, and 52 weeks postoperatively. Glenohumeral position (defined by the orientation and distance of the humerus with respect to the scapula) and bone-to-tendon marker lengths were measured from each scan. Within-patient variation in glenohumeral position measurements was described by their pooled within-patient standard deviations (SDs), and variation in bone-to-tendon marker lengths by their standard errors of measurement (SEMs) and 95% confidence level minimally detectable distances (MDD95) and changes (MDC95). Results The mean glenohumeral orientation from the 5 longitudinal CT scans averaged across the 48 patients was 12.6° abduction, 0.4° flexion, and –0.1° internal rotation. Within-patient SDs (95% confidence intervals) of glenohumeral orientation were 3.0° (2.7°-3.4°) in extension/flexion, 5.2° (4.6°-5.8°) in abduction/adduction, and 8.2° (7.3°-9.2°) in internal/external rotation. The SDs of glenohumeral distances were less than 1 mm in any direction. The estimated SEMs of bone-to-tendon lengths were consistent with a common value of 2.4 mm for any of the tendon markers placed across the repair, with MDD95 of 4.7 mm and MDC95 of 6.7 mm. Conclusion Apparent tendon retraction of 5 mm or more, when measured as the distance from a tendon marker's day of surgery location to its new location on a volumetrically registered longitudinal CT scan, may be considered above the usual range of measurement variation. Tendon retraction measured using implanted radiopaque tendon markers offers an objective and sufficiently reliable means for quantifying the commonly expected changes in structural healing following rotator cuff repair.

Serum inflammatory markers are commonly used to evaluate for the presence of surgical-site infection or periprosthetic joint infections following orthopaedic surgery. However, data on the utility of these tests following shoulder surgery are more limited. Worse diagnostic performance is seen in the shoulder when compared with use of these tests in the evaluation of hip and knee infections, likely due to the low virulence of the commonly cultured shoulder organisms, and the normalization of these serum markers following shoulder surgery is less well defined when compared with the hip and knee literature. A better understanding of the behavior of these serum inflammatory markers in the shoulder may enhance the utility of these tests in the diagnosis and management of infection following elective shoulder surgery.

Hypothesis and background Shoulder pain and dysfunction are common indications for shoulder arthroplasty, yet the factors that are associated with these symptoms are not fully understood. This study aimed to investigate the associations of patient and disease-specific factors with preoperative patient-reported outcome measures (PROMs) in patients undergoing primary shoulder arthroplasty. We hypothesized that worse mental health status assessed by the Veterans RAND 12-Item Health Survey (VR-12) mental component score (MCS), glenoid bone loss, and increasing rotator cuff tear severity would be associated with lower values for the preoperative total Penn Shoulder Score (PSS) and its pain, function, and satisfaction subscores. Methods We prospectively identified 12 patient factors and 4 disease-specific factors as possible statistical predictors of preoperative PROMs in patients undergoing primary shoulder arthroplasty at a single institution over a 3-year period. Multivariable statistical modeling and Akaike information criterion comparisons were used to investigate the unique associations with, and relative importance of, these factors in accounting for variation in the preoperative PSS and its subscores. Results A total of 788 cases performed by 12 surgeons met the inclusion criteria, with a preoperative median total PSS of 31 points (pain, 10 points; function, 18 points; and satisfaction, 1 point). As hypothesized, a lower VR-12 MCS was associated with lower preoperative PSS pain, function, and total scores, but patients with intact status or small to medium rotator cuff tears had modestly lower PSS pain subscores (ie, more pain) than patients with large to massive superior-posterior rotator cuff tears. Glenoid bone loss was not associated with the preoperative PSS. Female sex and fewer years of education (for all 4 outcomes), lower VR-12 MCS and preoperative opioid use (for all outcomes but satisfaction), and rotator cuff tear severity (for pain only) were the factors most prominently associated with preoperative PROMs. Conclusion In addition to mental health status and rotator cuff tear status, patient sex, years of education, and preoperative opioid use were most prominently associated with preoperative PROMs in patients undergoing shoulder arthroplasty. Further studies are needed to investigate whether these factors will also predict postoperative PROMs.

Background A linear relationship between baseplate insertion torque and compression force in reverse shoulder arthroplasty (RSA) baseplates with central screw design has been recently established. In this study, we evaluated 3 different baseplate designs and their influence on the torque-compression relationship. Methods Three different RSA baseplate designs were evaluated through biomechanical testing using a glenoid vault, bone surrogate model. A digital torque gauge was used to measure insertion torque applied to the baseplate, whereas compression data were collected continuously from a load cell. Additionally, 2 predictive models were developed to predict the compression forces of each baseplate design at varying levels of torque. Results A linear relationship was found between baseplate compression and insertion torque for all 3 baseplate designs. Both the monoblock and 2-piece locking designs achieved the goal torque of 6.8 Nm, whereas the 2-piece nonlocking design did not due to material strip-out. No significant difference in maximum compression was found between the monoblock and 2-piece locking designs. However, the 2-piece nonlocking design achieved significantly higher compression. Both predictive models were shown to adequately predict compressive forces at different torque inputs for the monoblock and 2-piece locking designs but not the 2-piece nonlocking design. Conclusion The torque-compression relationship of a central screw baseplate is significantly affected by baseplate design. A 2-piece nonlocking baseplate reaches higher compression levels and risks material strip-out at lower insertional torques compared with a monoblock and 2-piece locking design. This has implications both on component design and on surgeon tactile feedback during surgery.

To determine whether a simulated low-dose metal artifact reduction (MAR) CT technique is comparable with a clinical dose MAR technique for shoulder arthroplasty evaluation.Two shoulder arthroplasties in cadavers and 25 shoulder arthroplasties in patients were scanned using a clinical dose (140 kVp, 300 qrmAs); cadavers were also scanned at half dose (140 kVp, 150 qrmAs). Images were reconstructed using a MAR CT algorithm at full dose and a noise-insertion algorithm simulating 50% dose reduction. For the actual and simulated half-dose cadaver scans, differences in SD for regions of interest were assessed, and streak artifact near the arthroplasty was graded by 3 blinded readers. Simulated half-dose scans were compared with full-dose scans in patients by measuring differences in implant position and by comparing readers' grades of periprosthetic osteolysis and muscle atrophy.The mean difference in SD between actual and simulated half-dose methods was 2.42 HU (95% CI [1.4, 3.4]). No differences in streak artifact grades were seen in 13/18 (72.2%) comparisons in cadavers. In patients, differences in implant position measurements were within 1° or 1 mm in 149/150 (99.3%) measurements. The inter-reader agreement rates were nearly identical when readers were using full-dose (77.3% [232/300] for osteolysis and 76.9% [173/225] for muscle atrophy) and simulated half-dose (76.7% [920/1200] for osteolysis and 74.0% [666/900] for muscle atrophy) scans.A simulated half-dose MAR CT technique is comparable both quantitatively and qualitatively with a standard-dose technique for shoulder arthroplasty evaluation, demonstrating that this technique could be used to reduce dose in arthroplasty imaging.

The purpose of this study was to quantify correction of glenoid deformity and humeral head alignment in anatomic total shoulder arthroplasty as a function of preoperative pathology (modified Walch classification) and glenoid implant type in a clinical cohort using 3-dimensional computed tomography (CT) analysis.Patients undergoing anatomic total shoulder arthroplasty with a standard glenoid (SG) (n = 110) or posteriorly stepped augmented glenoid (AG) (n = 62) component were evaluated with a preoperative CT scan and a postoperative CT scan within 3 months of surgery. Glenoid version, inclination, and medial-lateral (ML) joint line position, as well as humeral head alignment, were assessed on both CT scans, with preoperative-to-postoperative changes analyzed relative to pathology and premorbid anatomy based on the modified Walch classification and glenoid implant type.On average, correction to the premorbid ML joint line position was significantly less in type A2 glenoids than in type A1 glenoids (-2.3 ± 2.1 mm vs. 1.1 ± 0.9 mm, P.001). Correction to premorbid version was not different between type B2 glenoids with AG components and type A1 glenoids with SG components (-1.7° ± 6.6° vs. -1.0° ± 4.0°, P = .57), and the premorbid ML joint line position was restored on average in both groups (0.3 ± 1.6 mm vs. 1.1 ± 0.9 mm, P = .006). Correction to premorbid version was not different between type B3 glenoids with AG components and type A1 glenoids with SG components (-0.6° ± 5.1° vs. -1.0° ± 4.0°, P = .72), but correction relative to the premorbid ML joint line position was significantly less in type B3 glenoids with AG components than in type A1 glenoids with SG components (-2.2 ± 2.1 mm vs. 1.1 ± 0.9 mm, P.001). Postoperative humeral glenoid alignment was not different in any group comparisons.In cases with posterior glenoid bone loss and retroversion (type B2 or B3 glenoids), an AG component can better correct retroversion and the glenoid ML joint line position compared with an SG component, with correction to premorbid version comparable to a type A1 glenoid with an SG component. However, restoration of the premorbid ML joint line position may not always be possible with SG or AG components in cases with more advanced central glenoid bone loss (type A2 or B3 glenoids). Further follow-up is needed to determine the clinical consequences of these findings.

Improving value in shoulder arthroplasty has gained increasing importance as procedure volume increases. To enhance the value of shoulder arthroplasty, an improvement of outcomes or a decrease in associated costs must occur. With the recent shift to a value-based care delivery model, analysis of the effects of surgical volume presents an opportunity to improve outcomes and reduce costs in shoulder arthroplasty. There are multiple reports in the literature expanding on the relationship between increased surgeon and hospital procedure volume and increased value for shoulder arthroplasty, by way of improved outcomes or decreased cost. This article highlights these studies.

Background Mobile technology offers the prospect of delivering high-value care with increased patient access and reduced costs. Advances in mobile health (mHealth) and telemedicine have been inhibited by the lack of interconnectivity between devices and software and inability to process consumer sensor data. The objective of this study was to preliminarily validate a motion-based machine learning software development kit (SDK) for the shoulder compared with a goniometer for 4 arcs of motion: (1) abduction, (2) forward flexion, (3) internal rotation, and (4) external rotation. Methods A mobile application for the SDK was developed and “taught” 4 arcs of shoulder motion. Ten subjects without shoulder pain or prior shoulder surgery performed the arcs of motion for 5 repetitions. Each motion was measured by the SDK and compared with a physician-measured manual goniometer measurement. Angular differences between SDK and goniometer measurements were compared with univariate and power analyses. Results The comparison between the SDK and goniometer measurement detected a mean difference of less than 5° for all arcs of motion (P > .05), with a 94% chance of detecting a large effect size from a priori power analysis. Mean differences for the arcs of motion were: abduction, −3.7° ± 3.2°; forward flexion, −4.9° ± 2.5°; internal rotation, −2.4° ± 3.7°; and external rotation −2.6° ± 3.4°. Discussion The SDK has the potential to remotely substitute for a shoulder range of motion examination within 5° of goniometer measurements. An open-source motion-based SDK that can learn complex movements, including clinical shoulder range of motion, from consumer sensors offers promise for the future of mHealth, particularly in telemonitoring before and after orthopedic surgery.

Our goal was to determine whether readmissions within 30 or 90 days following discharge are associated with Hospital Consumer Assessment of Healthcare Providers and Systems (HCAHPS) scores for total hip arthroplasty (THA) patients.HCAHPS surveys from all patients who underwent THA between January 2016 and September 2016 in our institution were analyzed. Readmissions, demographics, baseline joint pain, joint function, and Veterans RAND-12 scores were collected. Statistical analyses involved Pearson's chi-squared tests for categorical variables and Student's t-tests for continuous variables. Multivariable logistic regression models were used to determine whether 30-day or 90-day readmissions were independently associated with HCAHPS scores.A total of 1868 patients were identified, the survey was sent to 969 patients and 578 completed the survey (59.6%). Eight patients (1.4%) were readmitted within 30 days, and 28 patients (4.8%) within 90 days. These patients were more likely to undergo revision THA (P.001). For the 30-day readmission cohort, 4 of 8 patients (50.0%) rated the hospital a 9 or 10 out of 10 compared to 466 of 567 patients (82.2%) of the non-readmitted cohort (P = .019). Thirty-day readmissions were associated with significantly lower likelihood of rating the hospital a 9 or 10 out of 10 (odds ratio 0.18).Our results demonstrate a significant negative association between readmission and HCAHPS scores under several dimensions of the survey including nurse communication, doctor communication, pain management, and global satisfaction with the hospital experience.

Background A reinforced biologic strip graft was designed to mechanically augment the repair of rotator cuff tears that are fully reparable by arthroscopic techniques yet have a likelihood of failure. This study assessed the extent to which augmentation of human supraspinatus repairs with a reinforced fascia strip can reduce gap formation during in vitro cyclic loading. Methods The supraspinatus tendon was sharply released from the proximal humerus and repaired back to its insertion with anchors in 9 matched pairs of human cadaveric shoulders. One repair from each pair was also augmented with a reinforced fascia strip. All repairs were subjected to cyclic mechanical loading of 5 to 180 N for 1000 cycles. Results All augmented and nonaugmented repair constructs completed 1000 cycles of loading. Augmentation with a reinforced fascia strip graft significantly decreased the amount of gap formation compared with nonaugmented repairs. The average gap formation of augmented repairs was 1.5 ± 0.7 mm after the first cycle vs. 3.0 ± 1.2 mm for nonaugmented repairs (P = .003) and 5.0 ± 1.5 mm after 1000 cycles of loading, which averaged 24% ± 21% less than the gap formation of nonaugmented repairs (7.0 ± 2.8 mm, P = .014). Conclusion Cadaveric human supraspinatus repairs augmented with a reinforced fascia strip have significantly less initial stroke elongation and gap formation than repairs without augmentation. Augmentation limited gap formation to the greatest extent early in the testing protocol. Human studies are necessary to confirm the appropriate indications and effectiveness of augmentation scaffolds for rotator cuff repair healing in the clinical setting.

Background Hemolysis has been suggested as a feature conferring increased pathogenicity to certain Propionibacterium acnes strains in the setting of shoulder infection. The purpose of this study was to compare the virulence of hemolytic and nonhemolytic P acnes strains in patients undergoing revision shoulder arthroplasty. Methods Thirty-nine patients with at least 1 positive culture growth for P acnes at the time of revision surgery were identified with P acnes isolates available for hemolysis testing. Patients were grouped into those with P acnes isolates positive (n = 20) and negative (n = 19) for hemolysis. The groups were retrospectively compared based on objective perioperative findings around the time of revision surgery and the postoperative clinical course, including the need for revision surgery. All cases were classified into categories of infection (definite infection, probable infection, and probable contaminant) based on objective perioperative criteria. Results The presence of hemolysis was not significantly associated with an increased likelihood of infection (P = .968). Hemolysis demonstrated a 75% sensitivity and 26% specificity for determining infection (definite infection and probable infection categories). The hemolytic and nonhemolytic groups showed no difference regarding preoperative serum erythrocyte sedimentation rate and/or C-reactive protein level (P = .70), number of positive cultures (P = .395), time to positive culture (P = .302), and presence of positive frozen section findings (P = .501). Postoperatively, clindamycin resistance, shoulder function, and the rate of reoperation were not significantly different between the hemolytic and nonhemolytic groups. Conclusion The presence of hemolysis was not associated with increased pathogenicity in patients with P acnes–positive cultures following revision shoulder arthroplasty, when assessed by objective perioperative criteria and the postoperative clinical course.

Social media provide a unique method of analyzing outcomes and quality in medicine. The purpose of this observational study was to investigate the nature of social media content related to shoulder and elbow (S&E) surgery posted by patients, surgeons, and hospitals. A public search of Instagram for a two-year period yielded 1,177 patient-related posts. A categorical system assessed the perspective, timing, tone, and content of each post. Twitter accounts of 77 S&E specialists from the top five ranked U.S. News & World Report institutions were analyzed for activity and content. 5,246 Twitter and Instagram posts for the institutions were analyzed for frequency and content. Most patient-related posts were by patients (68%), postoperative (82%), positive (87%), and centered on return-to-play for Tommy John (34%), surgical site for shoulder arthroplasty (52%), and activities of daily living for rotator cuff repair (22%). 37% of surgeons had active accounts averaging 46 posts, 87% of which were practice advertisements. Hospitals averaged 273 posts over the 2-year period, focusing on education (38%) and community (18%). S&E patients share outcomes on social media in a positive tone with procedure-dependent emphases. Surgeons on social media use sites for practice augmentation. Hospitals often focused posts towards educating the community.

Diagnosing infection after shoulder arthroplasty can be a challenge because of the high prevalence of low-virulence organisms, such as Propionibacterium acnes. The purpose of this study was to evaluate the utility of implant sonication fluid cultures in the diagnosis of periprosthetic joint infection compared with standard culture techniques in patients undergoing revision shoulder arthroplasty.Routine perioperative testing was performed in 53 patients who underwent revision shoulder arthroplasty. In addition to routine tissue and fluid culture, the retrieved shoulder implants underwent sonication with culture of the sonicate fluid. Diagnostic performance of implant sonication culture was determined on the basis of previously defined infection criteria and compared with standard intraoperative cultures.Of the 53 revision cases that underwent implant sonication fluid culture, 25 (47%) were classified as infected. Intraoperative culture (tissue and fluid) sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV), and accuracy were 96%, 75%, 77%, 95%, and 85%, respectively. Using a cutoff of20 colony-forming units per milliliter to exclude contaminants, the sensitivity, specificity, PPV, NPV, and accuracy of implant sonicate culture were 56% (P .001, compared with standard intraoperative cultures), 93% (P = .07), 88% (P = .4), 70% (P = .02), and 75% (P = .22), respectively. Without use of a sonication fluid culture cutoff value, the sensitivity, specificity, PPV, NPV, and accuracy of implant sonicate culture were 96% (P = 1.0, compared with standard intraoperative cultures), 64% (P = .38), 71% (P = .53), 95% (P = .9), and 79% (P = .45).Implant sonication fluid culture in revision shoulder arthroplasty showed no significant benefits over standard intraoperative cultures in diagnostic utility for periprosthetic joint infection.

The annual volume of rotator cuff repairs in the United States is roughly 250,000, and failure rates still range from 20% to 70% in most studies despite significant advances in surgical technique and rehabilitation protocols. Even many “healed” repairs continue to have pain, weakness, and dysfunction, a phenomenon that may be explained by “Failure with continuity,” where the healing tendon retracts from the repaired location without a structural defect, leaving interposed scar tissue. To improve clinical outcomes, there is a need to minimize the rate of structural failure and minimize the failure with continuity that occurs after rotator cuff repair. Scaffold devices, in the form of extracellular matrix or synthetic grafts, hold promise in their abilities to mechanically and/or biologically augment repair sites. However, these devices can be technically challenging to apply, and the surgeon must be proficient in their use. To justify the increased operative time and cost associated with their use, we must also demonstrate the ability of these devices to improve structural and clinical outcomes.

Periprosthetic joint infection is one of the most serious complications associated with arthroplasty surgery and poses great diagnostic difficulty. Traditional diagnostic methods used to diagnose infection in the lower extremity are less accurate for shoulder prosthetic joint infection due to the indolent nature of the most common pathogen, Propionibacterium acnes. In addition to preoperative lab work and intraoperative tissue cultures, a more recent tool for the evaluation of periprosthetic infection has been analysis of synovial fluid for antimicrobial peptides and cytokines. Investigation of synovial biomarkers such as α-defensin and interleukins offers improved ability to more accurately diagnose prosthetic shoulder joint infection.

Three-dimensional (3D) imaging and implant templating along with patient specific instrumentation improves the accuracy of bone preparation and placement of the glenoid implant when compared to two-dimensional (2D) imaging without templating. Various type of patient specific instrumentation have been created. To date all provide equal accuracy. Some types of patient specific instrumentation are more cost effective and require less time to deliver the technology. This review article describes the technology and the clinical data published to date.

Background: Shoulder pain and dysfunction are common indications for rotator cuff repair surgery, yet the factors that are associated with these symptoms are not fully understood. Purpose/Hypothesis: This study aimed to investigate the associations of patient and disease-specific factors with baseline patient-reported outcome measures (PROMs) in patients undergoing rotator cuff repair. We hypothesized that tear size and mental health status, as assessed by the Veterans RAND 12-Item Health Survey mental component score (VR-12 MCS), would be associated with baseline total Penn Shoulder Score (PSS) and its pain, function, and satisfaction subscale scores. Study Design: Cross-sectional study; Level of evidence, 3. Methods: We prospectively identified 12 patient factors and 12 disease-specific factors as possible statistical predictors for baseline PROMs in patients undergoing surgical repair of superior-posterior rotator cuff tears at a single institution over a 3-year period. Multivariable statistical modeling and Akaike information criterion comparisons were used to investigate the unique associations with, and relative importance of, these factors in accounting for variation in baseline PSS and its subscale scores. Results: A total of 1442 patients who had undergone surgery by 23 surgeons met inclusion criteria, with a baseline median total PSS of 38.5 (pain, 12; function, 24.2; satisfaction, 2). Adjusted R2 in multivariable models demonstrated that the 24 general patient and disease-specific factors accounted for 22% to 24% of the variability in total PSS and its pain and function subscale scores. Large/massive tear size was significantly associated with worse PSS total score and function score but not pain or satisfaction scores. Lower VR-12 MCS was significantly associated with worse total PSS and all 3 subscale scores. Among other factors significantly associated with baseline PROMs were sex, race, preoperative opioid use, years of education, employment status, acromion status, and adhesive capsulitis. Lower VR-12 MCS, preoperative opioid use, female sex, and black race were the factors most strongly associated with baseline PROMs. Conclusion: Large/massive tear size, lower VR-12 MCS, and several additional patient and disease-specific factors are associated with baseline PROMs in patients undergoing rotator cuff repair. Further studies are needed to investigate whether these factors will also predict poor postoperative PROMs.