Search

Adapting electronics to perfectly conform to non-planar and rough surfaces, such as human skin, is a very challenging task which, if solved, could open up new applications in fields of high economic and scientific interest ranging from health to robotics, wearable electronics, human machine interface and Internet of Things. The key to success lies in defining a technology that can lead to the fabrication of ultra-thin devices while exploiting materials that are ultimately thin, with high mechanical flexibility and excellent electrical properties. Here, we report a hybrid approach for the definition of high-performance, ultra-thin and conformable electronic devices and circuits, based on the integration of ultimately thin semiconducting transition metal dichalcogenides (TMDC), i.e., MoS2, with organic gate dielectric material, i.e., polyvinyl formal (PVF) combined with the ink-jet printing of conductive PEDOT:PSS ink for electrodes definition. Through this cost-effective, fully bottom-up and solution-based approach, transistors and simple digital and analogue circuits are fabricated by a sequential stacking of ultrathin (nanometer) layers on a few micron thick polyimide substrate, which guarantees the high flexibility mandatory for the targeted applications.

Strain engineering is an efficient tool to tune and tailor the electrical and optical properties of 2D materials. The built-in strain can be tuned during the synthesis process of a two dimensional semiconductor, as molybdenum disulfide, by employing different growth substrate with peculiar thermal properties. In this work we demonstrate that the built-in strain of MoS2 monolayers, grown on SiO2/Si substrate using liquid precursors chemical vapor deposition, is mainly dominated by the size of the monolayer. In fact, we identify a critical size equal to 20 um, from which the built-in strain increases drastically. The built-in strain is maximized for 60 um sized monolayer, leading to 1.2% tensile strain with a partial release of strain close to the monolayer triangular vertexes due to formation of nanocracks. These findings also imply that the standard method for evaluation of the number of layers based on the Raman modes separation becomes unreliable for monolayer with a lateral size above 20 um.

Photopolymerization processes are exploited in light exposure-based 3D printing technologies, where either a focused laser beam or a patterned light sheet allows layers of a UV curable, liquid pre-polymer to be solidified. Here we focus on the crucial, though often neglected, role of the layer thickness on photopolymerization. The temporal evolution of polymerization reactions occurring in droplets of acrylate-based oligomers and in photoresist films with varied thickness is investigated by means of an optical system, which is specifically designed for in-situ and real-time monitoring. The time needed for complete curing is found to increase as the polymerization volume is decreased below a characteristic threshold that depends on the specific reaction pathway. This behavior is rationalized by modelling the process through a size-dependent polymerization rate. Our study highlights that the formation of photopolymerized networks might be affected by the involved volumes regardless of the specific curing mechanisms, which could play a crucial role in optimizing photocuring-based additive manufacturing., Comment: 31 pages, 10 figures, 1 table

The electronic and optical properties of graphene can be precisely tuned by generating deterministic arrangements of strain features. In this paper, we report the formation of widespread and controlled buckling delamination of monolayer graphene deposited on hexagonal boron-nitride promoted by a significant squeezing of the graphene flake and induced by polymeric micro-actuators. The flexibility of this method offers a promising technique to create arbitrary buckling geometries and arrays of wrinkles which could also be subjected to iterative folding-unfolding cycles. Further development of this method could pave the way to tune the properties of several kinds of other two-dimensional materials, such as transition metal dichalcogenides, by tailoring their surface topography.

Graphene, consisting of an inert, thermally stable material with an atomically flat, dangling bond-free surface is by essence an ideal template layer for van der Waals heteroepitaxy of two-dimensional materials such as silicene. However, depending on the synthesis method and growth parameters, graphene (Gr) substrates could exhibit, on a single sample, various surface structures, thicknesses, defects, and step heights. These structures noticeably affect the growth mode of epitaxial layers, e.g. turning the layer-by-layer growth into the Volmer-Weber growth promoted by defect-assisted nucleation. In this work, the growth of silicon on chemical vapor deposited epitaxial Gr (1 ML Gr/1ML Gr buffer) on 6H-SiC(0001) substrate is investigated by a combination of atomic force microscopy (AFM), scanning tunneling microscopy (STM), x-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and Raman spectroscopy measurements. It is shown that the perfect control of full-scale almost defect-free 1 ML Gr with a single surface structure and the ultra-clean conditions for molecular beam epitaxy (MBE) deposition of silicon represent key prerequisites for ensuring the growth of extended silicene sheets on epitaxial graphene.

Spatially-resolved organic functionalization of monolayer graphene is successfully achieved by combining low-energy electron beam irradiation with 1,3-dipolar cycloaddition of azomethine ylide. Indeed, the modification of the graphene honeycomb lattice obtained via electron beam irradiation yields to a local increase of the graphene chemical reactivity. As a consequence, thanks to the high-spatially resolved generation of structural defects (~ 100 nm), chemical reactivity patterning has been designed over the graphene surface in a well-controlled way. Atomic force microscopy and Raman spectroscopy allow to investigate the two-dimensional spatial distribution of the structural defects and the new features that arise from the 1,3-dipolar cycloaddition, confirming the spatial selectivity of the graphene functionalization achieved via defect engineering. The Raman signature of the functionalized graphene is investigated both experimentally and via ab initio molecular dynamics simulations, computing the power spectrum. Furthermore, the organic functionalization is shown to be reversible thanks to the desorption of the azomethine ylide induced by focused laser irradiation. The selective and reversible functionalization of high quality graphene using 1,3-dipolar cycloaddition is a significant step towards the controlled synthesis of graphene-based complex structures and devices at the nanoscale., Comment: 11 pages, 7 figures

Organic functionalization of graphene is successfully performed via 1,3-dipolar cycloaddition of azomethine ylide in the liquid phase. The comparison between 1-methyl-2-pyrrolidinone and N,N-dimethylformamide as dispersant solvents, and between sonication and homogenization as dispersion techniques, proves N,N-dimethylformamide and homogenization as the most effective choice. The functionalization of graphene nanosheets and reduced graphene oxide is confirmed using different techniques. Among them, energy-dispersive X-ray spectroscopy allows to map the pyrrolidine ring of the azomethine ylide on the surface of functionalized graphene, while micro-Raman spectroscopy detects new features arising from the functionalization, which are described in agreement with the power spectrum obtained from ab initio molecular dynamics simulation. Moreover, X-ray photoemission spectroscopy of functionalized graphene allows the quantitative elemental analysis and the estimation of the surface coverage, showing a higher degree of functionalization for reduced graphene oxide. This more reactive behavior originates from the localization of partial charges on its surface due to the presence of oxygen defects, as shown by the simulation of the electrostatic features. Functionalization of graphene using 1,3-dipolar cycloaddition is shown to be a significant step towards the controlled synthesis of graphene-based complex structures and devices at the nanoscale., Comment: 15 pages, 8 figures, for associated Supporting Information see http://shorturl.at/dCQ07

Nanoporous materials represent a versatile solution for a number of applications ranging from sensing, energy applications, catalysis, drug delivery, and many others. The synergy between the outstanding properties of graphene with a three-dimensional porous structure, circumventing the limits of its 2D nature, constitutes therefore a breakthrough for many fields. We report the first three-dimensional growth of epitaxial graphene on a porousified crystalline 4H-SiC(0001). The wafer porosification is performed via a sequence of metal-assisted photochemical and photoelectrochemical etching in hydrofluoric acid based electrolytes. Pore dimensions of the matrix have been evaluated by electron tomography resulting in an average diameter of 180 nm. Graphene growth is performed in an ultra high vacuum environment at a base pressure of $10^{-11}$ mbar. The graphene growth inside the pores is uniform as confirmed by Transmission Electron Microscopy (TEM) analysis. Raman spectroscopy confirms the high quality of the graphene with a 2D/G ratio $>1$ and an average graphene crystal size of $\approx$ 100 nm. Furthermore, it demonstrates a uniform coverage of graphene across the whole sample area. The surface-to-volume ratio of this novel material, its properties, the tunability of the pore size and the scalability of the surface porosification process offer a game changing perspective for a large number of applications.

We demonstrate a graphene-MoS2 architecture integrating multiple field-effect transistors and we independently probe and correlate the conducting properties of van der Waals coupled graphene-MoS2 contacts with the ones of the MoS2 channels. Devices are fabricated starting from high-quality single-crystal monolayers grown by chemical vapor deposition and characterized by scanning Raman and photoluminescence spectroscopies. Transconductance curves of MoS2 are compared with the current-voltage characteristics of graphene contact stripes, revealing a significant suppression of transport on the n-side of the transconductance curve. Based on ab-initio modeling, the effect is understood in terms of trapping by sulfur vacancies, which counter-intuitively depends on the field-effect, even though the graphene contact layer is positioned between the backgate and the MoS2 channel.

Monolayer tungsten disulfide ($WS_2$) has recently attracted large interest as a promising material for advanced electronic and optoelectronic devices such as photodetectors, modulators, and sensors. Since these devices can be integrated in a silicon (Si) chip via back-end-of-line (BEOL) processes, the stability of monolayer $WS_2$ in BEOL fabrication conditions should be studied. In this work, the thermal stability of monolayer single-crystal $WS_2$ at typical BEOL conditions is investigated; namely (i) heating temperature of $300$ $^\circ C$, (ii) pressures in the medium- ($10^{-3}$ mbar) and high- ($10^{-8}$ mbar) vacuum range; (iii) heating times from $30$ minutes to $20$ hours. Structural, optical and chemical analyses of $WS_2$ are performed via scanning electron microscopy (SEM), Raman spectroscopy, photoluminescence (PL) and X-ray photoelectron spectroscopy (XPS). It is found that monolayer single-crystal $WS_2$ is intrinsically stable at these temperature and pressures, even after $20$ hours of thermal treatment. The thermal stability of $WS_2$ is also preserved after exposure to low-current electron beam ($12$ pA) or low-fluence laser ($0.9$ $mJ/\mu m^2$), while higher laser fluencies cause photo-activated degradation upon thermal treatment. These results are instrumental to define fabrication and in-line monitoring procedures that allow the integration of $WS_2$ in device fabrication flows without compromising the material quality., Comment: 21 pages, 5 figures

In-vivo, real-time study of the local and collective cellular biomechanical responses requires the fine and selective manipulation of the cellular environment. One innovative pathway is the use of photoactive bio-substrates such as azobenzene-containing materials, which exhibit spectacular photomechanical properties, to optically trigger the local, mechanical stimulation of cells. Excited cells exhibit spectacular morphological modifications and area shrinkage, which are dependent on the illumination. This demonstrates the capabilities of photomechanically active substrates to study the phenomena resulting from the mechanical interaction of cells with their environment.

Graphene and related materials can lead to disruptive advances in next generation photonics and optoelectronics. The challenge is to devise growth, transfer and fabrication protocols providing high (>5,000 cm2 V-1 s-1) mobility devices with reliable performance at the wafer scale. Here, we present a flow for the integration of graphene in photonics circuits. This relies on chemical vapour deposition (CVD) of single layer graphene (SLG) matrices comprising up to ~12000 individual single crystals (SCs), grown to match the geometrical configuration of the devices in the photonic circuit. This is followed by a transfer approach which guarantees coverage over ~80% of the device area, and integrity for up to 150 mm wafers, with room temperature mobility ~5000 cm2 V-1 s-1. We use this process flow to demonstrate double SLG electro-absorption modulators with modulation efficiency ~0.25, 0.45, 0.75, 1 dB V-1 for device lengths ~30, 60, 90, 120 {\mu}m. The data rate is up to 20 Gbps. Encapsulation with single-layer hBN is used to protected SLG during plasma-enhanced CVD of Si3N4, ensuring reproducible device performance. Our full process flow (from growth to device fabrication) enables the commercial implementation of graphene-based photonic devices., Comment: 30 pages, 9 Figures

We report compact, scalable, high-performance, waveguide integrated graphene-based photodetectors (GPDs) for telecom and datacom applications, not affected by dark current. To exploit the photothermoelectric (PTE) effect, our devices rely on a graphene-polymer-graphene stack with static top split gates. The polymeric dielectric, poly(vinyl alcohol) (PVA), allows us to preserve graphene quality and to generate a controllable p-n junction. Both graphene layers are fabricated using aligned single-crystal graphene arrays grown by chemical vapor deposition. The use of PVA yields a low charge inhomogeneity 8 x 10$^{10}$ $cm^{-2}$ at the charge neutrality point, and a large Seebeck coefficient 140 ${\mu}$V K$^{-1}$, enhancing the PTE effect. Our devices are the fastest GPDs operating with zero dark current, showing a flat frequency response up to 67 GHz without roll-off. This performance is achieved on a passive, low-cost, photonic platform, and does not rely on nanoscale plasmonic structures. This, combined with scalability and ease of integration, makes our GPDs a promising building block for next-generation optical communication devices., Comment: 15 pages, 11 figures. Published under ACS AuthorChoice license

Paper is the ideal substrate for the development of flexible and environmentally sustainable ubiquitous electronic systems, which, combined with two-dimensional materials, could be exploited in many Internet-of-Things applications, ranging from wearable electronics to smart packaging. Here we report high-performance MoS2 field-effect transistors on paper fabricated with a channel-array approach, combining the advantages of two large-area techniques: chemical vapor deposition and inkjet-printing.The first allows the pre-deposition of a pattern of MoS2; the second, the printing of dielectric layers, contacts, and connections to complete transistors and circuits fabrication. Average ION/IOFF of 8 x 10^3 (up to 5 x 10^4) and mobility of 5.5 cm2 V-1 s-1 (up to 26 cm2 V-1 s-1) are obtained. Fully functional integrated circuits of digital and analog building blocks, such as logic gates and current mirrors, are demonstrated, highlighting the potential of this approach for ubiquitous electronics on paper.

The combination of the exciting properties of graphene with those of monolayer tungsten disulfide (WS2) makes this heterostack of great interest for electronic, optoelectronic and spintronic applications. The scalable synthesis of graphene/WS2 heterostructures on technologically attractive substrates like SiO2 would greatly facilitate the implementation of novel two-dimensional (2D) devices. In this work, we report the direct growth of monolayer WS2 via chemical vapor deposition (CVD) on single-crystal graphene arrays on SiO2. Remarkably, spectroscopic and microscopic characterization reveals that WS2 grows only on top of the graphene crystals so that the vertical heterostack is selectively obtained in a bottom-up fashion. Spectroscopic characterization indicates that, after WS2 synthesis, graphene undergoes compressive strain and hole doping. Tailored experiments show that such hole doping is caused by the modification of the SiO2 stoichiometry at the graphene/SiO2 interface during the WS2 growth. Electrical transport measurements reveal that the heterostructure behaves like an electron-blocking layer at large positive gate voltage, which makes it a suitable candidate for the development of unipolar optoelectronic components., Comment: 30 pages, main text and supplementary information

Highly oriented pyrolitic graphite (HOPG) is an inert substrate with a structural honeycomb lattice, well suited for the growth of two-dimensional (2D) silicene layer. It was reported that when Si atoms are deposited on HOPG surface at room temperature, they arrange in two configurations: silicene nanosheets and three dimensional clusters. In this work we demonstrate, by using scanning tunneling microscopy (STM) and Raman spectroscopy, that a third configuration stabilizes in the form of Si 2D nanosheets intercalated below the first top layer of carbon atoms. The Raman spectra reveal a structure located at 538 cm$^{-1}$ which we ascribe to the presence of sp$^2$ Si hybridization. Moreover, the silicon deposition induces several modifications in the graphite D and G Raman modes, which we interpret as an experimental evidence of the intercalation of the silicene nanosheets. The Si atom intercalation at room temperature takes place at the HOPG step edges and it detaches only the outermost graphene layer inducing a strong tensile strain mainly concentrated on the edges of the silicene nanosheets. Theoretical calculations of the structure and energetic viability of the silicene nanosheets, of the strain distribution on the outermost graphene layer and its influence on the Raman resonances support the STM and Raman observations., Comment: 18 pages, 9 figures, 2 tables

Every time a chemical reaction occurs, an energy exchange between reactants and environment exists, which is defined as the enthalpy of the reaction. In the last decades, research has resulted in an increasing number of devices at the micro- or nano-scale. Sensors, catalyzers, and energy storage systems are more and more developed as nano-devices which represent the building blocks for commercial "macroscopic" objects. A general method for the direct evaluation of the energy balance of such systems is not available at present. Calorimetry is a powerful tool to investigate energy exchange, but it usually needs macroscopic sample quantities. Here we report on the development of an original experimental setup able to detect temperature variations as low as 10 mK in a sample of 10 ng using a thermometer device having physical dimensions of 5x5 mm2. The technique has been utilized to measure the enthalpy release during the adsorption process of H2 on a titanium decorated monolayer graphene. The sensitivity of these thermometers is high enough to detect a hydrogen uptake of 10^(-10) moles, corresponding to 0.2 ng, with an enthalpy release of about 23 uJ. The experimental setup allows, in perspective, the scalability to even smaller sizes.

The control of the local strain profile in 2D materials offers an invaluable tool for tailoring the electronic and photonic properties of solid-state devices. In this paper, we demonstrate a local engineering of the exciton photoluminescence (PL) energy of monolayer tungsten disulfide (WS2) by means of strain. We apply a local uniaxial stress to WS2 by exploiting electron-beam patterned and actuated polymeric micrometric artificial muscles (MAMs), which we implement onto monolithic synthetic WS2/graphene heterostructures. We show that MAMs are able to induce an in-plane stress to the top WS2 layer of the van der Waals heterostructure and that the latter can slide on the graphene underneath with negligible friction. As a proof of concept for the local strain-induced PL shift experiments, we exploit a two-MAM configuration in order to apply uniaxial tensile stress on well-defined micrometric regions of WS2. Remarkably, our architecture does not require the adoption of fragile suspended microstructures. We observe a spatial modulation of the excitonic PL energy of the WS2 monolayers under stress, which agrees with the expected strain profile and attains a maximum redshift of about 40 meV at the maximum strain intensity point. After the actuation, a time-dependent PL blueshift is observed in agreement with the viscoelastic properties of the polymeric MAMs. Our approach enables inducing local and arbitrary deformation profiles and circumvents some key limitations and technical challenges of alternative strain engineering methods requiring the 2D material transfer and production of suspended membranes., Comment: This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in APL and may be found at https://aip.scitation.org/doi/10.1063/1.5122262

Molybdenum disulfide (MoS2) has been attracting extraordinary attention for its intriguing optical, electronic and mechanical properties. Here we demonstrate hybrid, organic-inorganic light-emitting nanofibers based on MoS2 nanoparticle dopants obtained through a simple and inexpensive sonication process in N-methyl-2-pyrrolidone and successfully encapsulated in polymer filaments. Defectiveness is found to be kept low, and stoichiometry preserved, by the implemented, gentle exfoliation method that allows the MoS2 nanoparticles to be produced. So-achieved hybrid fibers are smooth, uniform, flawless, and exhibit bright and continuous light emission. Moreover, they show significant capability of waveguiding self-emitted light along their longitudinal axis. These findings suggest the use of emissive MoS2 fibers enabled by gentle exfoliation methods as novel and highly promising optical material for building sensing surfaces and as components of photonic circuits., Comment: 22 pages, 9 figures, Nanoscale, 2018

The mechanical properties of azobenzene-containing polymer films are statistically measured by instrumented nanoindentation experiment in the dark and under illumination in the absorption band of the azobenzene molecules, with special emphasis on the creep behavior and recoverability. We use Dispersed Red 1 azobenzene derivatives, which remain in the stable trans isomer state in the dark and form a dynamical photo-stationary state between cis and trans isomer under illumination. Light induces a higher change in the film hardness than in the elastic stiffness, revealing the occurrence of a visco-plastic behavior of the film under illumination. Creep experiments performed at a constant load show a striking dissipative effect linked to the mass flowing under polarized illumination., Comment: 31 pages, 11 figures