Search

In hot climates, greenhouse cooling is essential to provide crops with suitable growth conditions. The combination of natural ventilation strategy such as windcatchers and evaporative cooling has the capability to decrease the energy requirement of greenhouses and provide improved conditions for the cultivation of crops. Although the windcatcher is a traditional architectural feature which originated in the Middle East, it has recently gained more attention and is increasingly being employed in buildings as a wind-driven cooling technique. This study aims to investigate the potential of a passive windcatcher and evaporative cooling system integrated into a greenhouse using computational fluid dynamics (CFD), validated with experimental data. Different wind speeds (1.96, 3.03, 4.87 and 6.07 m s−1) and ambient temperatures (30, 35, 40, 45 °C) and relative humidity (15, 25, 35 and 45%) were considered. The average error between measured and simulated results was 5.43% for the cross-flow ventilated greenhouse model and 4.55% for the evaporative cooling spray model. The results showed that the system could reduce the average indoor air temperature by up to 17.13 °C. The study explored the influence of different windcatcher heights and also the potential of fins installed in the windward openings to improve the uniformity of the ventilation airflow. The study also assessed the influence of neighbouring structures or other greenhouses on the ventilation performance. The results showed that the windcatcher provided higher airflow rates as compared to side openings when other structures surrounded the greenhouse.

Natural ventilation is an energy-efficient way to provide fresh air and enhance indoor comfort levels. The wind-driven natural ventilation in courtyards has been investigated by many researchers, particularly the influence of the spatial configuration and environmental parameters on the ventilation and thermal comfort performance. However, previous research has mainly focused on the courtyard region instead of the indoor spaces surrounding it. Additionally, as a microclimate regulator, courtyards are rarely assessed in terms of the impact of vegetation, including its impact on energy consumption and thermal comfort. Evapotranspiration from vegetation can help lower air temperature in the surrounding environment and, therefore, its influence on the ventilation and thermal comfort in buildings with courtyards should be evaluated. The present study investigates the impact of vegetation on the aero-thermal comfort conditions in a courtyard and surrounding buildings in hot climates. Computational fluid dynamics was employed to evaluate the aero-thermal comfort conditions of the courtyard and surrounding buildings with different configurations of vegetation. The modeling was validated using previous works’ experimental data, and good agreement was observed. Thermal comfort indices were used to assess thermal performance. The study also evaluated the cover, height and planting area of vegetation in the courtyard. The results of this study can help develop tools that can assist the addition of vegetation in courtyards to maximize their effects. Future works will focus on looking at the influence of the strategies on different designs and layouts of courtyards.

To host the 2022 FIFA World Cup, Qatar is facing the greatest challenge in balancing the energy consumptions for cooling the stadiums and the thermal comfort for both players and spectators. Previous studies have not considered using a combined configuration of air curtain and roof cooling supply slot in stadiums to prevent the infiltration of outside hot air and reduce the cooling system’s energy consumption. This paper presents a Computational Fluid Dynamics (CFD) study of thermal and wind modeling around a baseline stadium and simulates the cooling scenarios of air curtains and roof cooling along with the energy consumption estimations for the World Cup matches using Building Energy Simulation (BES). Sensitivity analysis of different supply speeds and supply temperatures of air curtain gates and roof cooling was carried out, and the results showed that scenario six, which provides supply air of 25 m/s and 20 m/s at the roof and air curtain gates with a supply temperature of 10 °C, demonstrates optimal thermal performances on both the spectator tiers and the pitch. Compared with the baseline stadium performance, the average reductions in temperature on the pitch and spectator tiers under scenario six could reach 15 °C and 14.6 °C. The reductions in the Predicted Percentage of Dissatisfied values for the upper and lower tiers as well as the pitch were 63%, 74%, and 78%. In terms of the estimated energy consumptions, scenario six would consume electric energy per match at a rate of 25.5 MWh compared with 22.8 MWh for one of the stadiums in the 2010 South Africa World Cup and 42.0 MWh for the 2006 Germany World Cup. Future research is recommended to explore the influence of supply angle on air curtain gates and roof cooling supply slots’ performances.

After winning the bid of the FIFA’s World Cup 2022, Qatar is facing the greatest challenges in terms of minimizing substantial energy consumptions for air-conditioning of stadiums and maintaining aero-thermal comfort for both players and spectators inside stadiums. This paper presents the results of temperature distributions and wind environment of the original stadium under the hot-humid climate and improvements on them for optimized scenarios of cooling jets. A combined computational fluid dynamics and building energy simulation approach was used to analyse the cooling performance and energy consumption per match of cooling air jets for 10 scenarios with different supply velocities, supply temperatures and locations of jets. The optimal scenario is to employ vertical jets above the upper tiers at supply temperature of 20°C and velocities of 2–12 m/s, integrated with horizontal jets of the same temperature at the lower tiers with 4 m/s and around the pitch with 7 m/s. This scenario can maintain the spectator tiers at an average temperature of 22°C and reduce the maximum predicted percentage of dissatisfied of thermal comfort from the original 100% to 63% for the pitch and 19% for the tiers, respectively. In terms of the energy consumption for the air-conditioning system per match, compared with one of the 2010 South Africa World Cup stadiums Royal Bafokeng stadium which consumed approximately 22.8 MWh energy for air-conditioning in winter (highest outdoor temperature 24.4°C), the maximum energy consumption of the optimal scenario in November (highest outdoor temperature 34.2°C) can reach 108 MWh. In addition, the spectator zones with scenario 8 have the potential to be resilient to the seasonal change of outdoor temperature if slight modifications of the supply velocities and precise temperature control on the spectator zones are applied. Moreover, the configurations presented in this paper can be used as a foundation of jets arrangement for future stadium retrofits in the hot climates. Practical application: This study assesses the aero-thermal conditions of a case study stadium under the hot climate of Qatar and explores the potential of applying cooling jets with different supply velocities, supply temperatures and their locations on the enhancement of both thermal and wind environment of spectator tiers and pitch. The assessment of the original stadium indicates that the ascending curved roof structure impedes the fresh air entering into the stadium and results in an asymmetric temperature distribution on the spectator tiers. The optimized design suggests a combination of vertical jets under the roof and both three arrays of horizontal jets at lower tiers and around pitch for future stadium optimizations in hot climates. It also recommends enhancing the thermal conditions on the pitch by optimizing the velocity of horizontal jets around the pitch. Moreover, the future design of the exact stadiums to be resilient to the seasonal changing outdoor temperature can be implemented based on scenario 8.