Search

While design methods of deep foundations are mainly developed for homogenous soil deposits, the presence of highly cemented layers could lead to underestimation of resistance and overestimation of settlement of pile foundations. This study presents a novel approach using competent caliche layers bonded to the top and bottom of a continuous flight auger (CFA) pile as a new composite foundation system named caliche stiffened pile (CSP). The key objective is to optimize the required pile length in a cost-effective approach without ameliorating soil properties. Settlements of the CSP foundation for a high-rise building were monitored and full-scale tests were conducted to measure piles' capacity. Finite element back analyses were performed to avoid adverse effect of sample disturbance in settlement calculations. A back calculation of a test fill embankment was performed to determine soil stiffness parameters by simulating an unscheduled imposed load to the structure. Impacts of the CSP on controlling the settlement of pile foundation and optimizing the required pile length are investigated using finite element analysis and a parametric study. The proposed CSP foundation can reduce the CFA pile settlement significantly in the presence of caliche layers with thickness equal or greater than a pile diameter at CFA pile head and toe, where the CSP is located. Key words: cemented soil layers, pile capacity, pile foundation, soil-pile interaction, foundation settlement, 1. Introduction Existence of highly cemented deposits in the soil strata enhances side resistance and end bearing capacity of piles while reduces the settlement of deep foundations (Stone 2009; Afsharhasani [...]

The production of portland cement is among the major contributors to greenhouse gas emissions that adversely affect the environment. Identifying sustainable materials to partially replace portland cement in concrete, such as pozzolanic materials, is crucial in addressing this issue. These materials mainly consist of silica and alumina that react with the available calcium hydroxide to form strength-bearing phases such as calcium silicate hydrates. Understanding the degree of pozzolanic reactivity of materials using efficient reactivity test methods is an important consideration. The paper thoroughly reviews the available literature related to direct and indirect pozzolanic reactivity test methods that have been utilized over the years. Direct methods quantify the amount of consumed calcium hydroxide, whereas indirect methods assess changes in the physical properties of the specimen due to pozzolanic reactions. The aim of this paper is to identify affordable, time-saving, and effective direct and indirect methods. Based on this study, the Frattini, electrical conductivity, and pH tests are considered the most time-efficient methods to assess pozzolanic materials. Electrical conductivity and pH tests are also easy to perform. In contrast, other methods are more time-consuming. [ABSTRACT FROM AUTHOR]

The construction of integral bridges is one of the most effective methods to reduce bridges' construction and in-service costs. However, there are associated geotechnical problems with their abutments backfill due to the integrated abutments. The main goal of this study is to evaluate and quantify the benefits of geogrid reinforcement for reducing the backfill's geotechnical problems. For this purpose, using small-scale physical modeling, the benefits of geogrid reinforcing of the backfill of an integral abutment bridge subjected to cyclic movements are evaluated. The results are then compared with a previous study performed on unreinforced backfill and two types of geocells. In this study, 120 loading cycles are applied to geogrid-reinforced soil to simulate the cyclic loadings on integral abutment backfill due to seasonal abutment displacement. The horizontal reaction load at the top of the wall, changes in pressure behind the wall, and deformation in backfill soil are measured during the test. Then the results are discussed in terms of equivalent peak lateral soil coefficient (Kpeak), lateral earth pressure coefficient (K*), and normalized settlement behind the wall (Sg/H). The derived lateral soil coefficients and settlement behind the abutment show that geogrid substantially reduces pressure and settlements after 120 cyclic loads. Based on the results, Kpeak and K* of the geogrid-reinforced backfill decrease by up to 36%, and Sg/H behind the wall decreases by 62%. In addition, the comparison of the results for geogrid with two geocell types shows that geogrid is more efficient in terms of lateral soil coefficients. [ABSTRACT FROM AUTHOR]

This study investigates the feasibility of the application of ultrasonic measurement to characterize Steel-Fiber-Reinforced Concrete (SFRC). Specifically, the effects of steel fiber content, age, moisture content, and fiber orientation on Ultrasonic-Pulse- Velocity (UPV) were investigated. In this regard, beam and cylindrical samples were fabricated with different steel fiber contents. The result indicated that for beam specimens the UPV increases with the addition of fiber up to 2% and decreases for higher fiber percentages. Additionally, the fiber orientation within the beam specimens influences the UPV measurements. For cylindrical samples, the rate of UPV decreased with the addition of steel fiber reinforcement. In addition, it was discovered that the curing period affects the magnitude of UPV. [ABSTRACT FROM AUTHOR]