Search

In this study, the economic analysis of the architectural part of the building, the use of both the solar thermal and solar electric systems in a poultry farm were discussed. In this economic analysis, the implementation of architectural solutions as well as the utilization of the solar thermal system considering the global gas price and the current gas rates in the country and finally the use of solar electric system with different subsidies were analyzed. Economic analysis was conducted using RETSCREEN software. The results showed that the internal rate of return (IRR) for the architectural solutions of using double-glazed windows and wall insulation, considering the global gas price, was estimated as 53.1% and, the investment return, taking into account the inflation and discount rates, was equal to 2.6 years, which is the breakeven point of investing in this solution. Utilizing the solar thermal system and without considering the cost of the underfloor heating system, the IRR value is equal to 34.1%, and considering the cost of the underfloor heating system, the IRR value is equal to 27.9%, which is economic in terms of these solutions. This option proves to be cost-effective. When employing the solar electric system with an IRR of 4.4%, this solution proves uneconomical under all circumstances due to the IRR falling below the bank rate and yielding a negative Net Present Value (NPV). However, when considering a 50% government subsidy and a 1.5-fold increase in the electricity purchase tariff for the solar electric system, this solution approaches the threshold of economic viability. [ABSTRACT FROM AUTHOR]

In order to reduce leachate from food waste a conventional tray cabinet dryer was designed and built, and the drying process of these wastes was investigated. A 2.7 kW heater equipped with an axial fan was used as the heating source. The experiments were performed at three temperatures of 50, 60, and 70 °C and three air velocities of 1, 1.5, and 2 m/s with a thickness of 3 cm. A conventional tray was used for drying. The Drying kinetics, effective moisture diffusivity and activation energy during drying of food waste were obtained. Results showed that improving air distribution in the back of the tray and no passing air on the sides of the tray causes that increase the drying rate significantly. The minimum drying process was occurred in temperature of 70°C and air velocity of 2 m/s at the 120 min. Effective moisture diffusivity of waste food during the drying process was in the range of 2.74×10-9-3.65×10-8 m²/s. The values for activation energy have ranged from a minimum of 21.6 kJ/mol in 1.5 m/s air velocity up to a maximum of 64.0 kJ/mol in 2m/s air velocity. [ABSTRACT FROM AUTHOR]

A solar heating system is designed to reduce energy consumption in a poultry farm. According to the physics and conditions of the indoor environment of the poultry building and the effect of the poultry weather conditions, the amount of 1.37 × 108 kJ/h during the year energy is required for heating. Then, by using double-glazed windows and insulation for the exterior walls of the building in the building architecture section, the amount of energy consumption is drastically reduced, and the required annual gas consumption is equal to 11,833 m3. The surface required for the collector is recommended to supply 50% of the energy from the sun with the rest from the hybrid system. The results showed that 26 m2 of a solar collector with an optimal slope of 45 degrees, and a tank volume of 440 L and a pump discharge of 1700 kg/h are required to provide 100% of energy. To receive the maximum amount of solar energy (maximum solar fraction (SF)), a collector surface equal to 30 m2 is required. However, when the economic point of view is considered, the collector surface equivalent to 26 m2 is recommended. To establish a balance, that is, 50% of the energy from the auxiliary system and the rest from the solar system, between the use of solar energy and the use of the auxiliary system, a collector area of 16 m2 is needed. Based on this, 60 photovoltaic modules, which are 10 cells in series in 6 parallel circuits, is the most optimal mode. [ABSTRACT FROM AUTHOR]