Search

Nitrogen-fixing bacteria can form a symbiotic relationship with several members of the major plant groups and with fungi. Here, we present the draft genome sequences of three nitrogen-fixing strains isolated from soil cooled for growing temperate root crops in a tropical climate.

Electronic waste has been the fastest increasing waste generated globally and is predicted to surpass 111 million tons per year by 2050. This trend is concerning, not just due to the growing volume but also due to its high composition of heavy metal elements, leading to potential environmental pollution if not managed properly. However, this issue opens a new prospect in material acquisition through the concept of urban mining via the metal extraction from electronic waste. A conventional method of extraction, i.e., chemical leaching, possesses harmful environmental impact with the production of its residual leachate. Thus, an alternative extraction technique is proposed, known as bioleaching, in which the microbial activity from bacteria mobilized metal into a more soluble form. In this study, bacterial strains were isolated from Malaysia sanitary landfill for bioleaching of copper from waste printed circuit boards (wPCB) with minimal mechanical pre-processing procedure. They were grown in low pH media to utilize their activity for copper bioleaching from the wPCB. Four bacterial strains were successfully isolated. Using 16S rRNA gene sequencing, the isolates were identified as Bacillus sp. strain SE, Bacillus sp. strain SC, Lysinibacillus sp. strain SE2, and Oryzobacter terrae strain S1A. All the isolates showed appropriate bioleaching ability, with strain SC demonstrated the highest copper extraction with up to 23.36 ppm through the two-step bioleaching process. This strain was further evaluated using a copper strip to observe the actual copper extraction and demonstrated a total of 0.80 ±0.02 mg/g copper recovery. These results suggest that copper bioleaching of wPCB is viable as a standalone process.

Leachate has become a great deal of concern due to its complex properties which are primarily caused by the high concentrations of organics and ammonia. Thus, proper leachate treatment is required prior to its discharge. Leachate can be treated in various ways, and biological treatment is one of the approaches. This treatment has been shown to be both effective and cost-efficient while offering the possibility of resource recovery in the form of bioenergy. In this study, the underlying patterns in publications related to leachate biological treatment were uncovered through bibliometric analysis. This study also lays the groundwork for a deeper understanding of the past, current, and future trends of the leachate biological treatment. Research publications from 1974 to 2021 were retrieved from the Scopus database, and it was identified that 2013 articles were published in the span of 47 years. From the analyzed publications, China played a leading role in publishing leachate biological treatment research articles as well as having the most productive institutions and authors. Meanwhile, the USA was found to be the most active country in initiating international collaborations with 33 countries. The research hotspots were also successfully identified using keyword co-occurrences analysis. Anaerobic digestion and constructed wetland were revealed to be the research hotspots. The critical role of biological treatment in removing nitrogen from leachate was also highlighted. Besides, numerous research gaps were identified in the application of aerobic granular sludge (AGS) for leachate treatment. This can be a potential area for research in the future. Finally, future research should be encouraged to focus on the use of sustainable treatment systems in which energy recovery in the form of biogases is promoted.

This work investigates the electrochemical oxidation of palm oil mill effluent (POME) treatment using platinum (Pt) as anode and graphite as a cathode. The response surface methodology was used to investigate the relationships between different factors conditions (voltage, electrolysis time and chemical support) and responses of the treatment (chemical oxygen demand reduction, colour removal, and total oil removal). A quadratic mathematical model was chosen for all responses using Box-Behnken Design (BBD) with R

The conversion of lignocellulosic biomass into bioethanol or biochemical products requires a crucial pretreatment process to breakdown the recalcitrant lignin structure. This research focuses on the isolation and characterization of a lignin-degrading bacterial strain from a decaying oil palm empty fruit bunch (OPEFB). The isolated strain, identified as Streptomyces sp. S6, grew in a minimal medium with Kraft lignin (KL) as the sole carbon source. Several known ligninolytic enzyme assays were performed, and lignin peroxidase (LiP), laccase (Lac), dye-decolorizing peroxidase (DyP) and aryl-alcohol oxidase (AAO) activities were detected. A 55.3% reduction in the molecular weight (Mw) of KL was observed after 7 days of incubation with Streptomyces sp. S6 based on gel-permeation chromatography (GPC). Gas chromatography-mass spectrometry (GC-MS) also successfully highlighted the production of lignin-derived aromatic compounds, such as 3-methyl-butanoic acid, guaiacol derivatives, and 4,6-dimethyl-dodecane, after treatment of KL with strain S6. Finally, draft genome analysis of Streptomyces sp. S6 also revealed the presence of strong lignin degradation machinery and identified various candidate genes responsible for lignin depolymerization, as well as for the mineralization of the lower molecular weight compounds, confirming the lignin degradation capability of the bacterial strain.

We report the draft genome sequence of Agrobacterium sp. strain S2, isolated from a decaying oil palm empty fruit bunch (OPEFB) in Negeri Sembilan, Malaysia, which yields potential genes encoding lignin degradation enzymes. This genome of 9,722,071 bp exhibited 58.9% GC content, 10,416 coding genes, and 12 RNAs.

We report the draft genome sequence of Agrobacterium sp. strain S2, isolated from a decaying oil palm empty fruit bunch (OPEFB) in Negeri Sembilan, Malaysia, which yields potential genes encoding lignin degradation enzymes. This genome of 9,722,071 bp exhibited 58.9% GC content, 10,416 coding genes, and 12 RNAs.

In this study, palm oil mill effluent (POME) was treated using electrocoagulation, whereby the influencing factors including voltage, electrolysis time, and electrolyte amount were optimized to achieve the highest chemical oxygen demand (COD) and color removal efficiencies. Graphite was selected as electrode material due to its performance better compared to aluminum and copper. Response surface methodology (RSM) was carried out for optimization of the electrocoagulation operating parameters. The best model obtained using Box-Behnken design (BBD) were quadratic for COD removal (R2 = 0.9844), color reduction (R2 = 0.9412), and oil and grease removal (R2 = 0.9724). The result from the analysis of variance (ANOVA) was obtained to determine the relationship between factors and treatment efficiencies. The experimental results under optimized conditions such as voltage 14, electrolysis time of 3 h, and electrolyte amount of 13.41 g/L show that the electrocoagulation process effectively reduced the COD (56%), color (65%), and oil and grease (99%) of the POME treatment.

Electronic waste has been the fastest increasing waste generated globally and predicted to surpass 111 million tons per year by the end of 2050. The amount of e-waste is a concern not just due to its volume, but also due to its high composition of heavy metal elements, which has leads to increased development of urban mining in terms of heavy metal extraction. One common method of extraction, i.e., acid leaching, is known for its harmful residual leachate, in which can have a high impact on the environment. This focuses on the alternative leaching techniques known as bioleaching, which take advantages of microbial activity in mobilization of metal into a more soluble form. Strains from sanitary landfill soil were isolated in acidic media and identified as Bacillus sp. strain SE, Lysinibacillus sp. strain SE2, Bacillus sp. strain S1A, and Oryzobacter sp. strain SC. Among the isolated stains, the identified strain Oryzobacter sp. strain SC was able to extract up to 23.36 ppm copper from waste printed circuit boards using a two-step bioleaching process, confirming the ability of the strain to perform bioleaching of copper from e-waste.

Streptomyces spp. are bacteria that are responsible for the degradation of aromatic compounds and produce secondary metabolites. Here, we present a complete genome sequence of Streptomyces sp. strain S6, which was isolated from an oil palm plantation, with a 7.8-Mbp liner chromosome, a GC content of 72%, and 4,266 coding sequences.

Streptomyces spp. are bacteria that are responsible for the degradation of aromatic compounds and produce secondary metabolites. Here, we present a complete genome sequence of Streptomyces sp. strain S6, which was isolated from an oil palm plantation, with a 7.8-Mbp liner chromosome, a GC content of 72%, and 4,266 coding sequences.

Agro-based final discharge is one of the major contributors to wastewater in the world. It creates high demand for efficient treatment. The electrocoagulation process can be used for agro-based wastewater treatment. The performance of the electrocoagulation process is based on several parameters, including the electrode materials, electrolysis time, current density, and electrolyte support. Agro-based industrial wastewater (AIW) treatment processes depend on the characteristics of the wastewater. The removal of organic content from various sources of AIW can reach up to more than 80%. Some studies show that the performance of the electrochemical process can be increased using a combination with other methods. Those other methods include biological and physical treatment. The results of previous research show that organic content and color can be degraded completely. The relationship between the energy consumption and operating cost was analyzed in order to show the efficiency of electrocoagulation treatment.

Ionic liquids (ILs) - as environmentally friendly “green” solvents- have been progressively used in various reactions as reagents, solvents and co-solvents including lipase-catalysed reactions. In fact, lipase-catalysed reactions in ILs are considered as a “green”-reaction and are more advantageous than chemical methods owing to the easy recovery of the product and the mild conditions of the reactions. The use of lipase in ILs provides many technological advantages compared to conventionally used solvents, such as selectivity enhancement, enzyme stability improvement, higher conversion rate, and better recyclability and recovery system. Nevertheless, in some cases, especially in hydrophilic ILs, lipase exhibits activity reduction when compared with organic solvents. Currently, various attempts have been made to enhance the performance of lipases in ILs. The main objective of this review is to demonstrate recent developments in the technology of using ILs as reaction media for lipase. It is expected that this review might be an inspiration in ILs assisted lipase-catalysed reactions to produce value-added materials including biofuels as well as biodiesel.

This study enhanced the production of thermostable organic solvent-tolerant (TS-OST) lipase by locally isolated thermotolerant Rhizopus sp. strain using solid-state fermentation (SSF) of palm kernel cake (PKC). The optimum conditions were achieved using a series of statistical approaches. The cultivation parameters, which include fermentation time, moisture content, temperature, pH, inoculum size, various carbon and nitrogen sources, as well as other supplements, were initially screened by the definitive screening design, and one-factor-at-a-time using PKC as the basal medium. Three significant factors (olive oil concentration, pH, and inoculum size) were further optimized using face-centred central composite design. The results indicated a successful and significant improvement of lipase activity by almost two-fold compared to the initial screening production. The findings showed that the optimal conditions were 2% (v/w) inoculum size, 2% (v/w) olive oil, 0.6% (w/w) peptone, 2% (v/w) ethanol, 70% moisture content at initial pH 10.0 and 45 °C within 72 h of fermentation. Process optimization resulted in maximum lipase activity of 58.63 U/gram dry solids (gds). The analysis of variance showed that the statistical model was significant (p value