Search

Magnetoelastic composites are integral elements of sensors and actuators utilizing magnetostriction for their functionality. Their sensitivity typically scales with the saturation magnetostriction and inversely with magnetic anisotropy. However, this makes the devices prone to minuscule residual anisotropic stress from the fabrication process, impairing their performance and reproducibility, hence limiting their suitability for arrays. This study presents a shadow mask deposition technology combined with a free-free magnetoelectric microresonator design intended to minimize residual stress and inhomogeneity in the magnetoelastic layer. Resonators are experimentally and theoretically analyzed regarding local stress anisotropy, magnetic anisotropy, and the {\Delta}E effect in several resonance modes. Further, the sensitivity is analyzed in the example of {\Delta}E-effect sensors. The results demonstrate a device-to-device variation of the resonance frequency < 0.2 % with sensitivities comparable with macroscopic {\Delta}E-effect sensors. The reproducibility is drastically improved over previous magnetoelastic device arrays. This development marks a step forward in the reproducibility and homogeneity of magnetoelastic resonators and contributes to the feasibility of large-scale, integrated sensor arrays., Comment: 26 pages, 13 figures

The new generation of laser-based solid-state lighting (SSL) white light sources requires new material systems capable of withstanding, diffusing and converting high intensity laser light. State-of-the-art systems use a blue light emitting diode (LED) or laser diode (LD) in combination with color conversion materials, such as yellow emitting Ce-doped phosphors or red and green emitting quantum dots (QD), to produce white light. However, for laser-based high-brightness illumination in particular, thermal management is a major challenge, and in addition, a light diffuser is required to diffuse the highly focused laser beam. Here, we present a hybrid material system that simultaneously enables efficient, uniform light distribution and color conversion of a blue LD, while ensuring good thermal management even at high laser powers of up to 5W. A highly open porous (> 99%) framework structure of hollow SiO$_2$ microtubes is utilized as an efficient light diffuser that can drastically reduce speckle contrast. By further functionalizing the microtubes with halide perovskite QDs (SiO$_2$@CsPbBr$_3$ as model system) color conversion from UV to visible light is achieved. Under laser illumination, the open porous structure prevents heat accumulation and thermal quenching of the QDs. By depositing an ultrathin (~ 5.5 nm) film of poly(ethylene glycol dimethyl acrylate) (pEGDMA) via initiated chemical vapor deposition (iCVD), the luminescent stability of the QDs against moisture is enhanced. The demonstrated hybrid material system paves the way for the design of advanced and functional laser light diffusers and converters that can meet the challenges associated with laser-based SSL applications., Comment: Corresponding authors: Fabian Sch\"utt, Huayna Terraschke

Soft and flexible conductors are essential in the development of soft robots, wearable electronics, as well as electronic tissue and implants. However, conventional soft conductors are inherently characterized by a large change in conductance upon mechanical deformation or under alternating environmental conditions, e.g., humidity, drastically limiting their application potential and performance. Here, we demonstrate a novel concept for the development of strain-invariant, fatigue resistant and highly water stable soft conductor. By combining different thin film technologies in a three-dimensional fashion, we develop nano- and micro-engineered, multi-layered (< 50 nm), ultra-lightweight (< 15 mg/cm$^3$) foam-like composite framework structures based on PEDOT:PSS and PTFE. The all-organic composite framework structures are characterized by conductivities of up to 184 S/m, remaining strain-invariant between 80 % compressive and 25 % tensile strain. We further show, that the multi-layered composites are characterized by properties that surpass that of framework structures based on the individual materials. Both, the initial electrical and mechanical properties of the composite framework structures are retained during long-term cycling, even after 2000 cycles at 50 % compression. Furthermore, the PTFE functionalization renders the framework structure highly hydrophobic, resulting in stable electrical properties, even when immersed in water for up to 30 days. The here presented concept overcomes the previous limitations of strain-invariant soft conductors and demonstrates for the first time a versatile approach for the development of innovative multi-scaled and multi-layered functional materials, for applications in soft electronics, energy storage and conversion, sensing, catalysis, water and air purification, as well as biomedicine., Comment: Corresponding authors: Dr.-Ing. Fabian Sch\"utt (fas@tf.uni-kiel.de) and Dr.-Ing. Stefan Schr\"oder (ssch@tf.uni-kiel.de); Shared senior authorship: Dr.-Ing. Fabian Sch\"utt and Dr.-Ing. Stefan Schr\"oder

Magnetoelastic sensors for the detection of low-frequency and low-amplitude magnetic fields are in the focus of research since more than 30 years. In order to minimize the limit of detection (LOD) of such sensor systems, it is of high importance to understand and to be able to quantify the relevant noise sources. In this contribution, cantilever-type electromechanic and magnetoelastic resonators, respectively, are comprehensively investigated and mathematically described not only with regard to their phase sensitivity but especially to the extent of the sensor-intrinsic phase noise. Both measurements and calculations reveal that the fundamental LOD is limited by additive phase noise due to thermal-mechanical noise of the resonator, i.e. by thermally induced random vibrations of the cantilever, and by thermal-electrical noise of the piezoelectric material. However, due to losses in the magnetic material parametric flicker phase noise arises, limiting the overall performance. In particular it is shown that the LOD is virtually independent of the magnetic sensitivity but is solely determined by the magnetic losses. Instead of the sensitivity, the magnetic losses, represented by the material's effective complex permeability, should be considered as the most important parameter for the further improvement of such sensors in the future. This implication is not only valid for magnetoelastic cantilevers but also applies to any type of magnetoelastic resonator.

The characterization of the wetting on superhydrophobic surfaces is rather complex. Usual contact angle experiments are difficult to perform and the lateral movement of droplets as well as the pinning at point defects on the surface can disturb the measurements. Even if precise contact angle measurements can be performed the information gain is limited if the surface is heterogeneously wetted. This results in the possibility of two surfaces with different roughness, different surface energy and thus different underlying wetting mechanisms exhibiting the same contact angle. We introduce the utilization of dynamic wetting experiments as an additional surface probe which allows a better characterization of superhydrophobic surfaces. A theoretical model is presented which describes the spreading of water jets on a superhydrophobic surface and allows the determination of the wetted fraction of a heterogeneously wetted superhydrophobic surface. The determined values for the wetted fraction identify a common problem when building artificial super hydrophobic surfaces and can fundamentally improve their understanding.