Search

The Nearctic leafhopper Scaphoideus titanus Ball (Hemiptera: Cicadellidae) is the main vector of the grapevine flavescence dorée (FD) phytoplasmas in Europe. To limit the impact of pest control activities on human health and the environment, EU legislation is withdrawing a growing number of active ingredients (a.i.), highlighting the need to evaluate alternative S. titanus management tools. In this context, we carried out a three-year (2021-2023) study in Italian vineyards characterized by high S. titanus populations. We compared the effectiveness of different insecticide-based strategies, i.e., targeting only nymphs (2021) or nymphs and adults (2022-2023), by spraying some of the currently allowed products (i.e., flupyradifurone, acetamiprid, sulfoxaflor, etofenprox, deltamethrin, and pyrethrins). The effectiveness of insecticide-based treatments was evaluated in terms of adult catches on yellow sticky traps. Furthermore, to achieve useful insights for optimizing current monitoring tools, we compared S. titanus catches on sticky traps of five different colors (i.e., yellow, green, blue, black, and white), as well as those achieved with two types of currently marketed yellow sticky traps. Results showed that etofenprox, deltamethrin, and sulfoxaflor were the most effective products for reducing S. titanus adult populations (33.64%, 30.30%, and 31.26%, respectively). Yellow and green sticky traps were more attractive to S. titanus adults than white, blue, and black ones. Moreover, a significant difference in capture efficiency was observed between two commercial yellow devices (i.e., tenfold higher catches using Glutor over Super color). Practical implications of our results are discussed in the context of current IPM against this key leafhopper vector of FD., (© The Author(s) 2024. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For commercial re-use, please contact reprints@oup.com for reprints and translation rights for reprints. All other permissions can be obtained through our RightsLink service via the Permissions link on the article page on our site—for further information please contact journals.permissions@oup.com.)

Natural products are thoroughly studied as valuable alternatives to synthetic insecticides. Heracleum persicum Desf. ex Fisch. (Apiaceae), commonly known as Golpar, is an Iranian medicinal plant largely employed as a spice, which has previously revealed insecticidal potential. The chemical composition of H. persicum essential oil (EO) was investigated by GC-MS and was mainly dominated by hexyl butyrate (36.1%) and octyl acetate (23.7%). The EO and its main esters were tested on three mosquito species. Aedes aegypti (L.) larvae were the most sensitive to all tested products. Lethal concentrations (LC 50 ) of 59.09, 53.59, and 47.05 ppm were recorded for the EO, hexyl butyrate, and octyl acetate, respectively. Aedes albopictus (Skuse) and Anopheles gambiae Giles demonstrated comparable sensitivity to the EO, with LC 50 values of 102.97 and 97.91 ppm, respectively, whereas the isolated constituents appeared more active on An. gambiae (LC 50 of hexyl butyrate and octyl acetate of 70.97 and 60.71 ppm, respectively) with respect to Ae. albopictus (LC 50 of hexyl butyrate and octyl acetate of 85.40 and 91.38 ppm, respectively). Low toxicity was registered for both EO and single components against human embryonic kidney (HEK293) cells. Overall, the H. persicum EO, hexyl butyrate, and octyl acetate could be further considered for larvicide development.

Lobesia botrana (Lepidoptera: Tortricidae) and Cryptoblabes gnidiella (Lepidoptera: Pyralidae) represent a threat to wine production in Mediterranean countries. In recent years, the development of new formulations promoted the spread of pheromone-based mating disruption (MD) as an effective tool for the management of several insect pests in different agricultural contexts. In this study, we investigated the efficacy of an experimental dispenser designed for simultaneous MD of these two pests. The biodegradable double-tube dispenser (Isonet® L CG-BIOX235) was tested for two years in two Italian wine-growing sites, the first in Apulia (Southern Italy), and the second in Tuscany (Central Italy). Isonet® L CG-BIOX235 efficacy was evaluated by testing different doses (i.e., 300, 400, and 500 dispensers/ha), on different varieties (i.e., Aglianico, Syrah, and Viognier), and comparing it with an untreated control. The MD performed using this dispenser significantly reduced the infestation of both L. botrana (i.e., percentage of infested bunches and number of nests per bunch) and C. gnidiella compared to the untreated control, although the occurrence of the latter fluctuated throughout the two-year trials. Overall, although our results underline the possibility of combining the pheromones of the two pests in a single dispenser for their simultaneous MD, they also highlight the need for further studies on some aspects of C. gnidiella biology and consequently improve the MD efficacy against this species., (© 2024. The Author(s).)

Objectives: To evaluate wear and friction properties of oscillating strips in order to validate the importance of a standardized interproximal enamel reduction (IPR) sequence to preserve their efficiency and lifetime., Materials and Methods: Fifteen complete oscillating IPR sequences were tested by means of tribological tests (Linear Reciprocating Tribometer, C.S.M. Instruments, Peseaux, Switzerland). Fifteen single 0.2-mm metallic strips underwent a long continuous cycle of 240 minutes. Strip surface roughness and waviness measurements were assessed by means of a contact probe surface profiler (TalySurf CLI 2000; Taylor Hobson, Leicester, UK) and TayMap software. Statistical analysis was performed with independent-samples t-test. Significance was at the P < .05 level. Scanning electronic microscopy analysis of strip surfaces was conducted with an FEI Quanta 200 (Hillsboro, Ore) in high vacuum at 30.00 kV., Results: Resin strips revealed a significant reduction in surface roughness (Ra, Rt, RDq) and a significant increase in waviness parameters (Wa, Wt). Rt and RDq values significantly decreased upon use of the metallic strips. Significantly higher values of Wa (+ 2.84 µm) and Wt (+0.1 µm) were observed only for the 0.2-mm metallic strips. Higher friction values were observed when the metallic strips were tested singularly rather than within the entire sequence. Lower Ra and Rt values were revealed when 0.2-mm metallic strips were tested up to 240 minutes., Conclusions: The application of a standardized oscillating sequence allows for more efficient wear performance of the strips with a significant impact on their abrasive power and lifetime., (© 2024 by The EH Angle Education and Research Foundation, Inc.)

Biopesticides are considered eco-friendly alternatives to synthetic agrochemicals. However, their impact on non-target organisms is still poorly understood. Social wasps, in particular, are a largely neglected group when it comes to risk assessment of plant protection products, despite the relevant ecological and economic services provided by these insects. In the present study, we evaluated the impact of a common biopesticide, the entomopathogenic fungus Beauveria bassiana, on the paper wasp Polistes dominula. We adopted a holistic approach in ecotoxicology by focusing not only on the detrimental effects on isolated individuals, but also on the whole colony. Both adult wasps belonging to different castes and immature larvae were topically exposed to a field-realistic concentration of fungal spores from the commercial strain of B. bassiana ATCC 74040 to assess the impact of the biopesticide on their survival, behavior and physiology. Our results showed that the fungus causes a number of adverse effects on P. dominula, that include increased mortality, altered locomotion and feeding rate, selective ejection of exposed larvae from nests, reduced oviposition rate and ovary development in foundresses, and colony failure. Our findings provide new insights on the often-neglected sublethal effects of pollutants that can jeopardize not only individual beneficial insects, but also the delicate social balance of their colonies and their valuable ecosystem services, highlighting that the natural origin of plant-protection products does not always guarantee environmental safety., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.)

Background: To evaluate by means of profilometric analysis and scanning electronic microscope (SEM) the effects on enamel surfaces of oscillating mechanical systems for interproximal enamel reduction (IPR). Fifteen complete (Group 1) oscillating IPR sequence and 15 single metallic strips (Group 2) for active IPR phase of 0.2 mm were selected and tested on 30 freshly extracted teeth by means of tribological tests with alternative dry-sliding motion (Linear Reciprocating Tribometer, C.S.M. Instruments, Peseaux, Switzerland). Enamel surface roughness and waviness measurements were assessed by contact probe surface profiler (TalySurf CLI 2000; Taylor Hobson, Leicester, UK) and a TayMap software for the 3D analysis. Statistical analysis was performed with independent samples t-test. Significance was established at the P < .05 level. SEM analysis of enamel surfaces was conducted with a FEI Quanta 200 (Hillsboro, USA) in high vacuum at 30.00 kV. Images were acquired at 30X, 100X, and 300X of magnification., Results: Teeth undergone Group 1 showed lower values of surface roughness (Ra - 0.34 µm, Rt - 1.55 µm) and significant increase of waviness parameters (Wa 0.25 µm, Wt 4.02 µm) when compared with those treated with Group 2. SEM evaluation showed smoothers and more regular surfaces when IPR was performed by complete IPR sequence. Single metallic strip determined more irregular surfaces characterized by extended grooves, alternated with enamel ridges and irregular fragments., Conclusion: The adoption of a standardized oscillating IPR sequence determines more regular and harmonious enamel surfaces at the end of the procedure. An adequate polishing after IPR plays a crucial role to guarantee a good long-term prognosis and a good respect of biological structures., (© 2023. The Author(s).)

The increasing interest in stretchable conductive composite materials, that can be versatile and suitable for wide-ranging application, has sparked a growing demand for studies of scalable fabrication techniques and specifically tailored geometries. Thanks to the combination of the conductivity and robustness of carbon nanotube (CNT) materials with the viscoelastic properties of polymer films, in particular their stretchability, "surface composites" made of a CNT on polymeric films are a promising way to obtain a low-cost, conductive, elastic, moldable, and patternable material. The use of polymers selected for specific applications, however, requires targeted studies to deeply understand the interface interactions between a CNT and the surface of such polymer films, and in particular the stability and durability of a CNT grafting onto the polymer itself. Here, we present an investigation of the interface properties for a selected group of polymer film substrates with different viscoelastic properties by means of a series of different and complementary experimental techniques. Specifically, we studied the interaction of a single-wall carbon nanotube (SWCNT) deposited on two couples of different polymeric substrates, each one chosen as representative of thermoplastic polymers (i.e., low-density polyethylene (LDPE) and polypropylene (PP)) and thermosetting elastomers (i.e., polyisoprene (PI) and polydimethylsiloxane (PDMS)), respectively. Our results demonstrate that the characteristics of the interface significantly differ for the two classes of polymers with a deeper penetration (up to about 100 μm) into the polymer bulk for the thermosetting substrates. Consequently, the resistance per unit length varies in different ranges, from 1-10 kΩ/cm for typical thermoplastic composite devices (30 μm thick and 2 mm wide) to 0.5-3 MΩ/cm for typical thermosetting elastomer devices (150 μm thick and 2 mm wide). For these reasons, the composites show the different mechanical and electrical responses, therefore suggesting different areas of application of the devices based on such materials.

We present an experimental investigation of methylammonium lead tribromide single crystals in the orthorhombic, tetragonal, and cubic phases based on inelastic and deep inelastic neutron scattering experiments. We show how the average hydrogen nuclear kinetic energy, mainly affected by zero-point vibrational energies, shows differences larger compared to the changes simply related to temperature effects when moving from one phase to another. In particular, the Gaussian contribution to the average nuclear kinetic energy is larger in the tetragonal phase compared to the cubic and orthorhombic ones. Moreover, we find that the vibrational densities of states of MAPbBr 3 single crystals in the orthorhombic phase are compatible with previously reported results on powder samples, and that the only vibrational modes that show slightly different frequencies compared to MAPbI 3 are those in the energy range between 100 and 300 cm -1 , related to librational/rotational modes. As these shifts are of about 10 cm -1 and do not affect any higher-energy vibrational mode, we conclude that the zero-point energies and average nuclear kinetic energies in the two-hybrid organic/inorganic perovskites are expected to be approximately the same within a harmonic framework.

Objective: The development of electrode arrays able to reliably record brain electrical activity is a critical issue in brain machine interface (BMI) technology. In the present study we undertook a comprehensive physico-chemical, physiological, histological and immunohistochemical characterization of new single-walled carbon nanotubes (SWCNT)-based electrode arrays grafted onto medium-density polyethylene (MD-PE) films., Approach: The long-term electrical stability, flexibility, and biocompatibility of the SWCNT arrays were investigated in vivo in laboratory rats by two-months recording and analysis of subdural electrocorticogram (ECoG). Ex-vivo characterization of a thin flexible and single probe SWCNT/polymer electrode is also provided., Main Results: The SWCNT arrays were able to capture high quality and very stable ECoG signals across 8 weeks. The histological and immunohistochemical analyses demonstrated that SWCNT arrays show promising biocompatibility properties and may be used in chronic conditions. The SWCNT-based arrays are flexible and stretchable, providing low electrode-tissue impedance, and, therefore, high compliance with the irregular topography of the cortical surface. Finally, reliable evoked synaptic local field potentials in rat brain slices were recorded using a special SWCNT-polymer-based flexible electrode., Significance: The results demonstrate that the SWCNT arrays grafted in MD-PE are suitable for manufacturing flexible devices for subdural ECoG recording and might represent promising candidates for long-term neural implants for epilepsy monitoring or neuroprosthetic BMI.

To meet the increasing demand, for stretchable conductive materials in a wide range of applications, innovative conductors based on single wall carbon nanotubes (SWCNT) self-grafted on different polymer films, are assembled. Aiming at a simple technology for flexible and stretchable electronic devices, and contrary to what commonly reported for carbon nanotubes (CNT), no chemical functionalization of SWCNT is necessary for stable grafting onto several polymeric surfaces. The novelty and functionality of our composite materials stand in the synergy among the intrinsic biocompatibility of CNT, a fully inert material, their electrical conductivity, and the stretchable-viscoelastic properties of the polymer-nanotube bundles composites. Electrical characterization of both unstretched and strongly stretched planar film conductors is provided, demonstrating the use of this new composite material for technological application. Also, an insight into the mechanisms of strong adhesion to the polymer is obtained by scanning electron microscopy (SEM) of the surface composite. As an example of technological application of such stretchable circuitry, the electrical functionality of a carbon nanotube-based six-sensor (electrode) grid is used to record subdural electrocorticograms in freely-moving laboratory rats over approximately three months.

Corrole derivatives have been recently employed in many applications at the solid-liquid interface. Therefore, the structural arrangement of the molecular layers in direct contact with the liquid is of fundamental interest. We investigated in solution the deposition of molecular layers of the previously prepared water-soluble phosphorus complex of a 2-sulfonato-10-(4-sulfonatophenyl)-5,15-dimesitylcorrole [see synthesis in our previous paper, M. Naitana et al., Chem. Eur. J. 2017, 23, 905-916]. The layer formation of P corroles onto the Au(111) surface was monitored by STM in situ, that is, with the substrate immersed in the solution. Marked differences in the morphology between the organic layer formed on the substrate and that deposited after solvent evaporation (drop casting) are reported. In particular, the coating of gold was more effective and stable in the presence of liquid. Preservation of functionality of the corrole molecules after adsorption was verified. This result validates the relevance of corrole layers at the solid-liquid interface to exploit the peculiar properties of these molecules in real-world applications., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Background: Community-acquired pneumonia (CAP) is complicated by cardiovascular events as myocardial infarction and stroke but the underlying mechanism is still unclear. We hypothesized that endothelial dysfunction may be implicated and that endotoxemia may have a role., Methods: Fifty patients with CAP and 50 controls were enrolled. At admission and at discharge, flow-mediated dilation (FMD), serum levels of endotoxins and oxidative stress, as assessed by serum levels of nitrite/nitrate (NOx) and isoprostanes, were studied., Results: At admission, a significant difference between patients with CAP and controls was observed for FMD (2.1±0.3 vs 4.0±0.3%, p<0.001), serum endotoxins (157.8±7.6 vs 33.1±4.8pg/ml), serum isoprostanes (341±14 vs 286±10 pM, p=0.009) and NOx (24.3±1.1 vs 29.7±2.2μM). Simple linear correlation analysis showed that serum endotoxins significantly correlated with Pneumonia Severity Index score (Rs=0.386, p=0.006). Compared to baseline, at discharge CAP patients showed a significant increase of FMD and NOx (from 2.1±0.3 to 4.6±0.4%, p<0.001 and from 24.3±1.1 to 31.1±1.5μM, p<0.001, respectively) and a significant decrease of serum endotoxins and isoprostanes (from 157.8±7.6 to 55.5±2.3pg/ml, p<0.001, and from 341±14 to 312±14 pM, p<0.001, respectively). Conversely, no changes for FMD, NOx, serum endotoxins and isoprostanes were observed in controls between baseline and discharge. Changes of FMD significantly correlated with changes of serum endotoxins (Rs=-0.315; p=0.001)., Conclusions: The study provides the first evidence that CAP is characterized by impaired FMD with a mechanism potentially involving endotoxin production and oxidative stress., (Copyright © 2016 European Federation of Internal Medicine. Published by Elsevier B.V. All rights reserved.)

Background & Aims: In hospitalized patients, lack of appetite, i.e., disease-associated anorexia, is the main factor determining insufficient food intake and weight loss, which in turn increase morbidity and mortality. Controversies exist on which tool should be preferred when diagnosing anorexia. Aim of the study was to evaluate in hospitalized medical patients, the performance of 4 different tools [i.e., self-assessment of appetite, FAACT-ESPEN score, visual analog scale (VAS), and the Anorexia Questionnaire (AQ)] in assessing disease-associated anorexia and predicting nutritional and clinical variables., Materials and Methods: Hospitalized patients consecutively admitted to the Internal Medicine ward at our institution were considered. After informed consent was obtained, patients were asked to self-assess their appetite vs the previous month. The VAS, the FAACT-ESPEN score and the Anorexia Questionnaire were also submitted. Food intake immediately following the interview was recorded. Nutritional (i.e., body weight, height), functional (i.e., handgrip strength) and clinical variables (i.e., length of stay) were registered upon admission and before discharge., Results: We studied 105 patients (74M:31F; 66.2 ± 16.3 yrs). The prevalence of anorexia as assessed by patients' self assessment, FAACT-ESPEN score, and the Anorexia Questionnaire was 23%, 10% and 48%, respectively. VAS did not show any correlation with food intake. Anorexic patients as identified by the self assessment of appetite showed reduced food intake and weaker handgrip strength than non-anorexic. The FAACT-ESPEN score correlated with body weight, food intake and handgrip strength, but was not related with length of stay. Anorexic patients as identified by the Anorexia Questionnaire showed reduced food intake, lower body weight, weaker handgrip strength and longer hospital stay than non-anorexic patients., Discussion: The prevalence of anorexia significantly varies according to the diagnostic tool used. Except for VAS, all the tested tools identify patients with impaired nutritional and functional variables. However, only the Anorexia Questionnaire identifies patients with longer hospital stay. Our results suggest that in clinical practice, modification of appetite reflects different underlying mechanisms whose impacts on clinical outcome measures may differ. Therefore, an ideal anorexia assessment tool does not appear to exist, but it should be chosen according to the outcome measures to be assessed (i.e., Anorexia Questionnaire to predict length of stay)., (Copyright © 2012 Elsevier Ltd and European Society for Clinical Nutrition and Metabolism. All rights reserved.)

Increased oxidative stress may contribute to cancer anorexia, which could be ameliorated by antioxidant supplementation. methylcholanthrene (MCA) sarcoma-bearing Fisher rats were studied. After tumour inoculation, rats were randomly assigned to standard diet (CTR group, n = 6), or to an antioxidant-enriched diet (AOX group, n = 8). Eight more rats (STD-AOX group) switched from standard to antioxidant diet when anorexia developed. At the end of the study, food intake (FI, g/d), body weight and tumour weight (g) were recorded, and plasma samples were obtained. On day 16, anorexia has appeared only in CTR and STD-AOX animals. At the end of the study, FI in AOX animals was still higher than in the other groups (p = 0.08). No differences in body and tumour weights were observed among groups. However, hydrogen peroxide and interleukin-1β levels were significantly reduced only in AOX rats. Data obtained suggest that early antioxidant supplementation improves cancer anorexia, ameliorates oxidative stress and reduces inflammation.

Unlabelled: We compared the effects of oral clonidine (4 microg/kg) and midazolam (0.5 mg/kg) on the preanesthetic sedation and postoperative recovery profile in children during tonsillectomy with or without adenoidectomy. In a double-blinded, double-dummy study design, 134 ASA physical status I-II children aged 4-12 yr were randomized to receive a combination of either clonidine and placebo (Group A), or placebo and midazolam (Group B) at 60-90 min and 30 min, respectively, before the induction of anesthesia. Children in the clonidine group exhibited more intense anxiety on separation and during induction of anesthesia via a mask as measured by the modified Yale Preoperative Anxiety Scores. They also had significantly lower mean intraoperative arterial blood pressures, shorter surgery, anesthesia, and emergence times, and a decreased need for supplemental oxygen during recovery compared with the midazolam group. However, the clonidine group had larger postoperative opioid requirements, maximum excitement and pain scores based on the Children's Hospital of Eastern Ontario scale in the Phase 1 postanesthetic care unit. There were no differences between the two groups in the times to discharge readiness, postoperative emesis, unanticipated hospital admission rates, postdischarge maximum pain scores, and 24 h analgesic requirements. The percentage of parents who were completely satisfied with the child's preoperative experience was significantly higher in the midazolam group. There were no differences in parental satisfaction with the recovery period. We conclude that under the conditions of this study, oral midazolam is superior to oral clonidine as a preanesthetic medication in this patient population., Implications: We compared preanesthetic sedation and postoperative recovery after oral clonidine (4 microg/kg) and midazolam (0.5 mg/kg) in children during tonsillectomy. The clonidine group had greater preoperative anxiety and shorter surgery and anesthesia times, but required more postoperative analgesia. Delayed recovery and discharge times did not differ. Midazolam was superior to clonidine as oral preanesthetic medication for these patients.

Unlabelled: We compared, in a double-blinded manner, the anesthetic maintenance and recovery properties of remifentanil with a clinically comparable fentanyl-based anesthetic technique in pediatric ambulatory surgical patients. Anesthesia was induced with either halothane or sevoflurane and nitrous oxide and oxygen. Patients were randomized (computer generated) to receive either remifentanil or fentanyl in a blinded syringe with nitrous oxide and oxygen in one of four possibilities: halothane/remifentanil, halothane/fentanyl, sevoflurane/remifentanil or sevoflurane/fentanyl. In patients receiving remifentanil, a placebo bolus was administered, and a continuous infusion (0.25 microg. kg(-1). min(-1)) was begun. In patients receiving fentanyl, a bolus (2 microg/kg) was administered followed by a placebo continuous infusion. The time from discontinuation of the anesthetic to extubation, discharge from the postanesthesia care unit (PACU), and discharge to home, as well as pain scores, were assessed by a blinded nurse observer. Systolic blood pressure and heart rate were noted at selected times, and adverse events were recorded. Remifentanil provided faster extubation times and higher pain-discomfort scores. PACU and hospital discharge times were similar. There were no statistical differences among the groups for adverse events. There were statistically, but not clinically, significant differences in hemodynamic variables. We noted that continuous infusions of remifentanil were intraoperatively as effective as bolus fentanyl. Although patients could be tracheally extubated earlier with remifentanil, this did not translate to earlier PACU or hospital discharge times. In addition, remifentanil was associated with higher postoperative pain scores. The frequent incidence of postoperative pain observed in the postoperative recovery room suggests that better intraoperative prophylactic analgesic regimens for postoperative pain control are necessary to optimize remifentanil's use as an anesthetic for children., Implications: This is a study designed to examine the efficacy and safety of a short-acting opioid, remifentanil, when used in pediatric patients. The frequent incidence of postoperative pain observed in the postoperative recovery room suggests that better intraoperative prophylactic analgesic regimens for postoperative pain control are necessary to optimize remifentanil's use as an anesthetic for children.