Search

GlobalAllomeTree is an international network platform that shares differential equations, which has gradually received high global attention. Currently, aiming at the lack of growth differential equations for major tree species in China on this platform, this study updated the standardized tree height-diameter relationship equation for major tree species in China. Due to the canopy and lower shrubs and grass cover, the measurement of tree height relative to diameter at breast height (DBH) is difficult, so mathematical tools need to be used for regression calculations. 36 tree species were selected as materials to construct a tree height-diameter relationship equation. Based on the binary volume model of major tree species in China and the one-dimensional volume table of each region, 1 692 sets of tree height-diameter data generated with a sampling diameter order of 1 cm interval were used as equation samples, and 1 238 sets of field survey data were used as validation samples. The modeling results showed as followed: the correlation coefficient (R²) of the national universal tree height-diameter equation fitting based on 1 692 sets of tree height diameter data from 36 main tree species was 0.801, indicating that the equation fitting results were good, so the tree height can be estimated by measuring the diameter at breast height (H, m) - diameter at breast height (D, cm) square H = aDb; using the equation to fit 36 main tree species, the results showed that the determination coefficients (R²) of the tree height-diameter at breast height equation for 36 main tree species were all greater than 0.916, and the values of mean error (ME), mean absolute error (MAE), and root mean square error (RMES) were relatively small. The overall accuracy of the equation was high, which could be widely promoted; using 1 238 analytical tree data collected from field work, the accuracy of the equation was verified based on the fitting formulas and parameter estimates a and b of the tree height diameter equation for 36 main tree species. The results showed that the average relative error of the equation prediction was 16.86%, within the allowable range of error, and the model format was standardized. Above results provided scientific reference for users of the GlobalAllomeTree platform. [ABSTRACT FROM AUTHOR]

Land-use and land-cover change (LULCC) is a critical environmental issue that has significant effects on biodiversity, ecosystem services, and climate change. This study examines the land-use and land-cover (LULC) spatiotemporal dynamics across a three-decade period (1998–2023) in a district area. In order to forecast the LULCC patterns, this study suggests a hybrid strategy that combines the random forest method with multi-layer perceptron (MLP) and Markov chain analysis. To predict the dynamics of LULC changes for the year 2035, a hybrid technique based on multi-layer perceptron and Markov chain model analysis (MLP-MCA) was employed. The area of developed land has increased significantly, while the amount of bare land, vegetation, and forest cover have all decreased. This is because the principal land types have changed due to population growth and economic expansion. This study also discovered that between 1998 and 2023, the built-up area increased by 468 km2 as a result of the replacement of natural resources. It is estimated that 25.04% of the study area's urbanization will increase by 2035. The performance of the model was confirmed with an overall accuracy of 90% and a kappa coefficient of around 0.89. It is important to use advanced predictive models to guide sustainable urban development strategies. The model provides valuable insights for policymakers, land managers, and researchers to support sustainable land-use planning, conservation efforts, and climate change mitigation strategies. [ABSTRACT FROM AUTHOR]

The Relief Degree of Land Surface (RDLS) is an important index to evaluate regional environment. It has a significant effect on the local climate, geologic hazards, the path and speed of fire spreading, the migrations of wild animals, and the runoff path and speed of precipitation. The forest-steppe ecotone in northern China is one of ecological fragile zones. In-depth study of the RDLS of the forest-steppe ecotone in northern China will help to implement ecological projects scientifically and promote the construction of the national ecological security barrier. The Shuttle Radar Topography Mission (SRTM-GL1 30 m) data were used to determine the optimal analysis window for RDLS based on the mean change-point method, and the elevation difference was extracted based on the window analysis method. The RDLS model was used to extract RDLS of the forest-steppe ecotone and analyzed with the help of a spatial auto-correlation model. The correlation between mean elevation, relative elevation difference, and RDLS was also analyzed. The results show that the optimal analysis window size for RDLS was 29 × 29, corresponding to an area of 0.76 km2. The RDLS under the optimal analysis window extracted from SRTM-GL1 (30 m) ranged from 0.084 to 3.516. The RDLS had significant spatial clustering, with high RDLS mainly distributed in the mountainous areas and low RDLS mainly distributed in mountain-to-plain transition zone; the RDLS between different administrative units and different watersheds had obvious variability. Overall, the RDLS was characterized as decreasing, increasing, and then decreasing from the south to north, while it was high in the west and low in the east. And the RDLS was linearly positively correlated with mean elevation and relative elevation difference. In the future, the implementation of major ecological projects in the forest-steppe ecotone in northern China, such as soil and water conservation, afforestation tree species selection, ecological corridor design, ecological management, geological disaster prevention, and forest fire prevention, should fully consider the local topographic conditions. These research results can provide topographic references for the implementation of ecological planning and engineering in this area and similar areas. It contributes to sustainable development and maximization of ecological benefits and promotes the establishment of a national ecological security barrier. [ABSTRACT FROM AUTHOR]

The stand basal area, closely related to age, site quality, and stand density, is an important factor for predicting forest growth and yield. The accurate estimation of site quality is especially a key component in the stand basal area model. We utilized sample plots with Picea asperata Mast. as the dominant species in the multi-period National Forest Inventory (NFI) dataset to establish a site index (SI) model including climate effects through the difference form of theoretical growth equations and mixed-effects models. We combined the SI calculated from the SI model, stand age, and stand density index to construct a basal area growth model for Picea asperata Mast. stands. The results show that the Korf model is the best SI base model for Picea asperata Mast. The mean temperatures in summer and winter precipitation were used as the fixed parameters to construct a nonlinear model. Ultimately, elevation, origin, and region, as random effects, were incorporated into the mixed-effects model. The coefficients (R2) of determination of the base model, the nonlinear model including climate, and the nonlinear mixed-effects model are 0.869, 0.899, and 0.921, with root-mean-square errors (RMSEs) of 1.320, 1.315, and 1.301, respectively. Among the basal area models, the Richards model has higher precision. And the basal area model including an SI incorporating climatic factors had a higher determination coefficient (R2) of 0.918 than that of the model including an SI without considering climatic effects. The mixed-effects model incorporating climatic and topographic factors shows a better fitting performance of SI, resulting in a higher precision of the basal area model. This indicates that in the development of forest growth models, both biophysical and climatic factors should be comprehensively considered. [ABSTRACT FROM AUTHOR]

Climate change is heavily altering plant distributions, posing significant challenges to conventional agricultural practices and ecological balance. Meanwhile, mixed species planting emerges as a potent strategy to enhance agricultural resilience, counteract climate change, preserve ecological balance, and provide a solution to economic instability. The MaxEnt model was used to predict the suitable area of Citrus reticulata under five climate scenarios and to explore affecting environmental factors. Litchi chinensis, Punica granatum, and Lycium chinense were selected as mixed species to analyze the spatial distribution and centroid migration trend of potentially suitable areas. The research results show the following: (1) The primary environmental factors impacting C. reticulata distribution are annual precipitation (1000–4000 mm), precipitation of driest quarter over 100 mm, and mean temperature of coldest quarter (12–28 °C). Crucially, the mixed species exhibited similar environmental sensitivities, indicating mutual mixing suitability. (2) Currently, the C. reticulata suitable area is of 240.21 × 104 km2, primarily in South, East, Central, and Southwest China, with potential for expansion to 265.41 × 104 km2 under the 2090s SSP1-2.6 scenario. (3) The geometric center of the moderately-to-highly suitable areas for C. reticulata is located in Hunan Province. Future scenarios show the C. reticulata's centroid migrating northwest, with distances of less than 110 km. Mixed planting trends toward higher latitudes, fluctuating from 6 km to 210 km. (4) Mixed planting area planning: C. reticulata and L. chinensis are suitable for mixed planting in South China. C. reticulata and P. granatum, C. reticulata and L. chinense are suitable for mixed planting in most areas of Central, East, Southwest, and South China. This research presents a new perspective on using mixed design principles for ecological adaptation and the sustainable mixed planting of C. reticulata, in response to China's changing climate. This approach is expected to help the economic fruit tree industry enhance ecological resilience and economic stability in the face of future climate change challenges. [ABSTRACT FROM AUTHOR]

Accurate measurement and estimation of forest carbon sinks and fluxes are essential for developing effective national and global climate strategies aimed at reducing atmospheric carbon concentrations and mitigating climate change. Various errors arise during forest monitoring, especially measurement instability due to seasonal variations, which require to be adequately addressed in forest ecosystem research and applications. Seasonal fluctuations in temperature, precipitation, aerosols, and solar radiation can significantly impact the physical observations of mapping equipment or platforms, thereby reducing the data's accuracy. Here, we review the technologies and equipment used for monitoring forest carbon sinks and carbon fluxes across different remote sensing platforms, including ground-based, airborne, and spaceborne remote sensing. We further investigate the uncertainties introduced by seasonal variations to the observing equipment, compare the strengths and weaknesses of various monitoring technologies, and propose the corresponding solutions and recommendations. We aim to gain a comprehensive understanding of the impact of seasonal variations on the accuracy of forest map data, thereby improving the accuracy of forest carbon sinks and fluxes. [ABSTRACT FROM AUTHOR]

The accurate assessment of tree volume is crucial for developing forest management plans, and this can be achieved using tree volume models. In this study, data on individual trees were collected and calculated, including the diameter at breast height (D), ground diameter (DG), tree height (H), and tree volume (V). A total of 400 Populus × tomentosa Carrière, 400 Populus tomentosa Carr, and 400 Populus × canadensis Moench trees were sampled. Two compatible volume model systems were established using corresponding methods. The models consisted of the following five types: V-DH, V-D, V-DG, H-D, and DG-D. In our calculations, before the horizontal line was the dependent variable, and behind the horizontal line was the independent variable. Variations in preferences for the H-D models were observed among the tree species, with the logistic function proving the most suitable for Populus × tomentosa Carrière, Chapman–Richard function for Populus tomentosa Carr, and power function for Populus × canadensis Moench. Among the three volume models, the V-DH model exhibited a superior performance, with its R2 values ranging from 0.965 to 0.984 and mean estimated error (MPE) values ranging from 1.26% to 1.78%. Following this was the V-D model, with R2 values between 0.9359 and 0.9704 and MPE values between 1.71% and 2.46%. The V-DG model ranked third, with R2 values ranging from 0.8746 to 0.9501 and MPE values ranging from 2.33% to 3.16%. In the H-D model, the R2 and MPE values ranged from 0.4998 to 0.7851 and from 1.31% to 1.45%, respectively. For the DG-D model, the R2 values ranged from 0.9563 to 0.9868 and the MPE values ranged from 0.47% to 0.68%. Comparing both compatible methods, the nonlinear seemingly uncorrelated regression (NSUR) was more effective. The three volume models demonstrated high levels of accuracy and compatibility, providing a reliable scientific foundation for forest management and the formulation of harvesting plans in Beijing, with significant practical implications. [ABSTRACT FROM AUTHOR]

Precisely estimating the position, diameter at breast height (DBH), and height of trees is essential in forest resource inventory. Augmented reality (AR)-based devices help overcome the issue of inconsistent global point cloud data under thick forest canopies with insufficient Global Navigation Satellite System (GNSS) coverage. Although monocular simultaneous localization and mapping (SLAM) is one of the current mainstream systems, there is still no monocular SLAM solution for forest resource inventories, particularly for the precise measurement of inclined trees. We developed a forest plot survey system based on monocular SLAM that utilizes array cameras and Inertial Measurement Unit (IMU) sensors provided by smartphones, combined with augmented reality technology, to achieve a real-time estimation of the position, DBH, and height of trees within forest plots. Our results from the tested plots showed that the tree position estimation is unbiased, with an RMSE of 0.12 m and 0.11 m in the x-axis and y-axis directions, respectively; the DBH estimation bias is −0.17 cm (−0.65%), with an RMSE of 0.83 cm (3.59%), while the height estimation bias is −0.1 m (−0.95%), with an RMSE of 0.99 m (5.38%). This study will be useful in designing an algorithm to estimate the DBH and position of inclined trees using point clouds constrained by sectional planes at the breast height of the trunk, developing an algorithm to estimate the height of inclined trees utilizing the relationship between rays and plane positions, and providing observers with visual measurement results using augmented reality technology, allowing them to judge the accuracy of the estimates intuitively. Clearly, this system has significant potential applications in forest resource management and ecological research. [ABSTRACT FROM AUTHOR]

In this study, MODIS land products and China land cover datasets were used to extract normalized difference vegetation index, land surface temperature, and vegetation cover type in Yan'an City during the summers of 2017–2022. On this basis, analysis of spatial change and correlation were carried out as a way to study the mitigation effect on urban heat islands in Yan'an City with forest. The study showed that: (1) The coverage of normalized difference vegetation index over 0.4 in summer in Yan'an City increased from 59.38% to 69.12%, and the vegetation showed good growth conditions. It has a spatial distribution pattern of more in the south and less in the north. (2) The proportion of the urban heat island in Yan'an City increased from 15.51% to 16.86%. Urban heat island intensity fluctuated year by year, with the maximum urban heat island intensity of 6.26 °C appearing in 2019. It has a spatial distribution pattern of less in the south and less in the north. The transition rate of temperature field grade from low to high is 73.32%, and the transition rate to low is only 0.31%. (3) There is a negative correlation between land surface temperature and normalized difference vegetation index in Yan'an City. Vegetation has a mitigating effect on the UHI and the best cooling effect among the vegetation is shown by forest. The cooling effect of forest in Yan'an City is attenuated by an increase in distance, and the effective range is greater than 1000 m. In this study, the regulation effect of forest on the urban heat island was obtained by digging deeper into the intrinsic connection between spatial change in vegetation cover and land surface temperature change in Yan'an City. It provides an important reference for the formulation of meteorological protection policy as well as the promotion of sustainable development of the urban ecological environment and is of guiding significance for future urban planning and ecological construction. [ABSTRACT FROM AUTHOR]

Contemporary research on terrestrial carbon exchange processes is paramount for a nuanced comprehension of global and local climatic fluctuations and their interaction with anthropogenic activities. This study delves into the spatiotemporal dynamics of vegetation carbon exchanges within the Three Northern Protection Forest Project Area, leveraging two decades of MODIS NPP data and an innovative NEP estimation model. Our analysis highlights a generally increasing trend in Net Ecosystem Productivity (NEP) from 2000 to 2020, with significant growth in approximately 32.97% of the study area and slight increases in 24.18%. Notably, lower NEP values were found in desert and arid zones, whereas higher values were observed in more vegetated regions like Ningxia, Hebei, Inner Mongolia, and the northeast. The study also assesses the impact of climate variables and land-use changes on NEP, identifying both negative and positive correlations in specific regions. Despite the overall positive trend towards ecological restoration and enhancement, significant uncertainties remain, emphasizing the urgent need for further research to support ecosystem resilience and sustainable management practices. [ABSTRACT FROM AUTHOR]

Globally, forest ecosystems, especially subtropical forests, play a central role in biogeochemical cycles and climate regulation, demonstrating their irreplaceable function. The subtropical region of China, characterized by its unique forest ecosystem, complex terrain, climate heterogeneity, diverse vegetation types, and frequent human activities, underscores the importance of the in-depth study of its net primary productivity (NPP). This paper employs the eddy covariance–light use efficiency (EC-LUE) model to quantitatively estimate the gross primary productivity (GPP) of this region from 2001 to 2018, followed by an estimation of the actual net primary productivity (ANPP) using the carbon use efficiency (CUE). The results showed that over these 18 years, the annual average ANPP was 677.17 gC m−2 a−1, exhibiting an overall increasing trend, particularly in mountainous areas, reserves, and the cultivated lands of the northeastern plains, whereas a significant decrease was observed around the urban agglomerations on the southeast coast. Furthermore, the Thornthwaite memorial model was applied to calculate the potential net primary productivity (PNPP), and diverse scenarios were set to quantitatively evaluate the impact of climate change and human activities on the vegetation productivity in the study area. It was found that in areas where the ANPP increased, both human activities and climate change jointly influenced ANPP dynamics; in areas with a decreased ANPP, the impact of human activities was particularly significant. Additionally, the heterogeneous distribution of ANPP across different altitudinal gradients and the driving effects of various climatic factors were analyzed. Finally, a partial correlation analysis was used to examine the relationships between the temperature, precipitation, and ANPP. This study indicated that temperature and precipitation have a substantial impact on the growth and distribution of vegetation in the region, yet the extent of this influence shows considerable variation among different areas. This provides a robust scientific basis for further research and understanding of the carbon dynamics of subtropical forest ecosystems and their role in the global carbon cycle. [ABSTRACT FROM AUTHOR]

The growth of trees generates a huge carbon sink, which is of great significance in alleviating environmental problems such as global warming caused by carbon emissions. To accurately assess the carbon sink of forests, a model of the annual growth rate of tree diameter at breast height (DBH) in 4 forms for 13 main tree species (groups) in Beijing was established based on the data from the 6th to 9th National Forest Inventory. This model predicted the future trend of DBH changes, thereby provided a computational basis for calculating carbon storage using the continuous function method of biomass conversion factors. Ultimately, it estimated the carbon storage and carbon density of deciduous forests in Beijing by 2050. The results showed that: 8 of the tree species (groups) had a DBH annual growth rate model R2 greater than 0.900, with the highest R2 of 0.960 for linden; except willow and Fraxinus mandshurica/Juglans mandshurica/Phellodendron amurense the RMSE of 11 tree species (groups) was less than 0.5 cm; except for poplars, other hard broad-leaved forests and elms, Bias was less than 1.0 cm. The overall R2 in the validation of DBH prediction accuracy was high, with the highest for black locusts (0.951) and the lowest for other hard broad-leaved forests (0.766). It was predicted the carbon stock of arbor forests in Beijing in 2050 was 42.71 TgC, and the carbon density is 43.35 MgC · hm-2. The study found that the tree growth simulation method based on the annual growth rate at breast height model could effectively improve the overall accuracy of future carbon sink potential assessment of tree forests in Beijing, which could provide a theoretical basis for formulating greenhouse gas reduction policies and achieving the 2060 carbon neutrality target. [ABSTRACT FROM AUTHOR]

Located at the foothills of the Himalayan Mountains, subtropical and moist temperate forests of Pakistan are very rich in flora and fauna. However, due to increased illegal and uncontrolled harvesting of wood, agricultural activities, and urbanization, these forests are fast disappearing. The recent expansion of human activities resulting illegal and uncontrolled harvesting, agricultural activities, and urbanization is a cause for concern. Using Landsat imagery, Markov Chain and Cellular Automata, this study focused on the quantitative assessment of spatiotemporal land use and land cover changes during 1998, 2008, 2018 and a simulation of 2028. In addition, a forest inventory survey of biomass and carbon sink were respectively calculated for these subtropical broad-leaved evergreen, subtropical chirpine and moist temperate forests. Results showed biomass was 560.56 ± 104.33 Mg ha−1, 350.95 ± 104.33 Mg ha−1 and 153.63 ± 104.33 Mg ha−1 in moist temperate, subtropical chirpine and subtropical broad-leaved forests respectively. Meanwhile, carbon was 313.94 ± 44.78 Mg C ha−1, 221.34 ± 44.78 Mg C ha−1 and 131.77 ± 44.78 Mg C ha−1 in moist temperate, subtropical chirpine and subtropical broad-leaved forests respectively. During the study period, land-use and land cover changes showed forest land changed from 40936.77 ha to 36709.23 ha, agricultural land from 4220.46 to 10374.64 ha, and built-up area from 1497.60 to 5395.12 ha. The average annual biomass and carbon loss were respectively 50.34 Gg ha−1yr−1 and 31.33 Gg C ha−1 yr−1. The information derived from this study could assist in the development of appropriate sustainable forest management policies in Pakistan. Keywords: Land use change, Biomass, Carbon, Himalayan mountains, Markov chain, Urbanization

China is one of the countries with the largest citrus cultivation areas, and its citrus industry has received significant attention due to its substantial economic benefits. Traditional manual forestry surveys and remote sensing image classification tasks are labor-intensive and time-consuming, resulting in low efficiency. Remote sensing technology holds great potential for obtaining spatial information on citrus orchards on a large scale. This study proposes a lightweight model for citrus plantation extraction that combines the DeepLabV3+ model with the convolutional block attention module (CBAM) attention mechanism, with a focus on the phenological growth characteristics of citrus in the Guangxi region. The objective is to address issues such as inaccurate extraction of citrus edges in high-resolution images, misclassification and omissions caused by intra-class differences, as well as the large number of network parameters and long training time found in classical semantic segmentation models. To reduce parameter count and improve training speed, the MobileNetV2 lightweight network is used as a replacement for the Xception backbone network in DeepLabV3+. Additionally, the CBAM is introduced to extract citrus features more accurately and efficiently. Moreover, in consideration of the growth characteristics of citrus, this study augments the feature input with additional channels to better capture and utilize key phenological features of citrus, thereby enhancing the accuracy of citrus recognition. The results demonstrate that the improved DeepLabV3+ model exhibits high reliability in citrus recognition and extraction, achieving an overall accuracy (OA) of 96.23%, a mean pixel accuracy (mPA) of 83.79%, and a mean intersection over union (mIoU) of 85.40%. These metrics represent an improvement of 11.16%, 14.88%, and 14.98%, respectively, compared to the original DeepLabV3+ model. Furthermore, when compared to classical semantic segmentation models, such as UNet and PSPNet, the proposed model achieves higher recognition accuracy. Additionally, the improved DeepLabV3+ model demonstrates a significant reduction in both parameters and training time. Generalization experiments conducted in Nanning, Guangxi Province, further validate the model's strong generalization capabilities. Overall, this study emphasizes extraction accuracy, reduction in parameter count, adherence to timeliness requirements, and facilitation of rapid and accurate extraction of citrus plantation areas, presenting promising application prospects. [ABSTRACT FROM AUTHOR]

The measurement of plant sap flow has long been a traditional method for quantifying transpiration. However, conventional direct measurement methods are often costly and complex, thereby limiting the widespread application of tree sap flow monitoring techniques. The concept of a Virtual Measurement Instrument (VMI) has emerged in response to this challenge by combining simple instruments with Artificial Intelligence (AI) algorithms to indirectly assess specific measurement objects. This study proposes a tree sap flow estimation method based on environmental factors and AI algorithms. Through the acquisition of environmental factor data and the integration of AI algorithms, we successfully achieved indirect measurement of tree sap flow. Accounting for the time lag response of the flow to environmental factors, we constructed the Magnolia denudata sap flow estimation model using the K-Nearest Neighbor (KNN), Random Forest (RF), Backpropagation Neural Network (BPNN), and Long Short-Term Memory network (LSTM) algorithms. The research results showed that the LSTM model demonstrated greater reliability in predicting sap flow velocity, with R2 of 0.957, MAE of 0.189, MSE of 0.059, and RMSE of 0.243. The validation of the target tree yielded an R2 of 0.821 and an error rate of only 4.89% when applying the model. In summary, this sap flow estimation method based on environmental factors and AI provides new insights and has practical value in the field of tree sap flow monitoring. [ABSTRACT FROM AUTHOR]

Forest stock volume (FSV) is a key indicator for measuring forest quality, evaluating forest management capabilities, and the main factor for evaluating forest carbon sequestration levels. In this study, to achieve an accurate estimation of FSV, we used Ninth Beijing Forest Inventory data (FID), and Landsat 8 OLI and Sentinel-2 MSI imagery to establish FSV models. The performance of Landsat 8 and Sentinel-2 imagery data in estimating forest volume in Huairou District, Beijing, China was compared. The combination of Landsat 8 and Sentinel-2 satellite data was employed to create a new data source. Two variable selection methods, linear stepwise regression (LSR) and recursive feature elimination (RFE), were used to extract feature variables. The multiple linear regression(MLR) models, Back Propagation (BP) neural network models, and Random Forest (RF) models were employed to estimate forest volume in the study area based on the feature variables obtained from both data sources. The research results indicate (1) the Sentinel-2-based model achieved higher accuracy compared to the same model based on the Landsat 8 factor set. The correlation between the red-edge band of Sentinel-2 imagery and FSV is more significant than that of other characteristic variables used. Variables derived from the red-edge band have the potential to reduce model errors; (2) the estimation accuracy of the model can be significantly improved by using the RFE (Recursive Feature Elimination) method to select remote sensing feature variables. RFE is based on the importance ranking of all feature variables and selects the feature variables that contribute the most to the model. In the variable group selected by RFE, the texture features and the derived features from the red-edge band, such as S e n B 5 , S e n R V I , S e n m N D V I r e , and S e n B 5 M e a n , contribute the most to the improvement of model accuracy. Furthermore, in the optimal Landsat 8–Sentinel-2 RFE-RF model, where texture features are involved, the rRMSE is greatly reduced by 3.7% compared to the joint remote sensing RFE-RF model without texture features; (3) the MLR, BP, and RF models based on the modeling factor set established on Sentinel-2 have accuracy superior to the model accuracy established based on the modeling factor set of Landsat 8. Among them, the Random Forest (RF) method inverted by the recursive feature elimination (RFE) method using Sentinel-2A image has the best inversion accuracy effect ( R 2 = 0.831, R M S E = 12.604 m 3 ha − 1 , r R M S E = 36.411%, M A E = 9.366 m 3 ha − 1 ). Comparing the performance of the models on the test set, the ranking is as follows, Random Forest (RF) model > Back Propagation (BP) neural network model > multiple linear regression (MLR) model. The feature variable screening based on the Random Forest's recursive feature elimination (RFE) method is better than the linear stepwise regression (LSR). Therefore, the RFE-RF method based on the joint variables from Landsat 8 and Sentinel-2 satellite data to establish a new remote sensing data source provides the possibility to improve the estimation accuracy of FSV and provides reference for forest dynamic monitoring. [ABSTRACT FROM AUTHOR]