Search

In this paper, we report on the utilization of micro-technology based tools to fight viral infections. Inspired by various hemoperfusion and immune-affinity capture systems, a blood virus depletion device has been developed that offers highly efficient capture and removal of the targeted virus from the circulation, thus decreasing virus load. Single-domain antibodies against the Wuhan (VHH-72) virus strain produced by recombinant DNA technology were immobilized on the surface of glass micro-beads, which were then utilized as stationary phase. For feasibility testing, the virus suspension was flown through the prototype immune-affinity device that captured the viruses and the filtered media left the column. The feasibility test of the proposed technology was performed in a Biosafety Level 4 classified laboratory using the Wuhan SARS-CoV-2 strain. The laboratory scale device actually captured 120,000 virus particles from the culture media circulation proving the feasibility of the suggested technology. This performance has an estimated capture ability of 15 million virus particles by using the therapeutic size column design, representing three times over-engineering with the assumption of 5 million genomic virus copies in an average viremic patient. Our results suggested that this new therapeutic virus capture device could significantly lower virus load thus preventing the development of more severe COVID-19 cases and consequently reducing mortality rate. Graphical Abstract

Reliable measurement of the binding kinetics of low molecular weight analytes to their targets is still a challenging task. Often, the introduction of labels is simply impossible in such measurements, and the application of label-free methods is the only reliable choice. By measuring the binding kinetics of Ni(II) ions to genetically modified flagellin layers, we demonstrate that: (1) Grating-Coupled Interferometry (GCI) is well suited to resolve the binding of ions, even at very low protein immobilization levels; (2) it supplies high quality kinetic data from which the number and strength of available binding sites can be determined, and (3) the rate constants of the binding events can also be obtained with high accuracy. Experiments were performed using a flagellin variant incorporating the C-terminal domain of the nickel-responsive transcription factor NikR. GCI results were compared to affinity data from titration calorimetry. We found that besides the low-affinity binding sites characterized by a micromolar dissociation constant (Kd), tetrameric FliC-NikRC molecules possess high-affinity binding sites with Kd values in the nanomolar range. GCI enabled us to obtain real-time kinetic data for the specific binding of an analyte with molar mass as low as 59 Da, even at signals lower than 1 pg/mm2.

Full characterization of the attached carbohydrate moieties of glycoproteins is of high importance for both the rapidly growing biopharmaceutical industry and the biomedical field. In this paper we report the design and production of three important 6HIS-tagged exoglycosidases (neuraminidase, β-galactosidase and hexosaminidase) to support rapid solid phase N-glycan sequencing with high robustness using immobilized enzymes. The exoglycosidases were generated in bacterial expression systems with high yield. Oriented immobilization via the 6HIS-tag portion of the molecules supported easy accessibility to the active sites and consequently high digestion performance. The three exoglycosidases were premixed in an appropriate matrix format and processed in a low-salt buffer to support long term storage. The digestion efficiencies of the immobilized enzymes were demonstrated by using solid phase sequencing in conjunction with capillary electrophoresis analysis of the products on a commercial glycoprotein therapeutic (palivizumab) and human serum derived fluorophore labeled glycans.

High resolution analysis of N-glycans can be performed after their endoglycosidase mediated removal from proteins. N-glycosidase F peptide (PNGase F) is one the most frequently used enzyme for this purpose. Because of the significant demand for PNGase F both in basic and applied research, rapid and inexpensive methods are of great demand for its large-scale production, preferably in immobilizable form to solid supports or surfaces. In this paper, we report on the high-yield production of N-terminal 6His-PNGase F enzyme in a bacterial Escherichia coli SHuffle expression system. The activity profile of the generated enzyme was compared to commercially available PNGase F enzymes, featuring higher activity for the former. The method described here is thus suitable for the cost-effective production of PNGase F in an active, immobilizable form.

The environmental monitoring of Ni is targeted at a threshold limit value of 0.34 mu M, as set by the World Health Organization. This sensitivity target can usually only be met by time-consuming and expensive laboratory measurements. There is a need for inexpensive, field-applicable methods, even if they are only used for signaling the necessity of a more accurate laboratory investigation. In this work, bioengineered, protein-based sensing layers were developed for Ni detection in water. Two bacterial Ni-binding flagellin variants were fabricated using genetic engineering, and their applicability as Ni-sensitive biochip coatings was tested. Nanotubes of mutant flagellins were built by in vitro polymerization. A large surface density of the nanotubes on the sensor surface was achieved by covalent immobilization chemistry based on a dithiobis(succimidyl propionate) cross-linking method. The formation and density of the sensing layer was monitored and verified by spectroscopic ellipsometry and atomic force microscopy. Cyclic voltammetry (CV) measurements revealed a Ni sensitivity below 1 mu M. It was also shown that, even after two months of storage, the used sensors can be regenerated and reused by rinsing in a 10 mM solution of ethylenediaminetetraacetic acid at room temperature.

Prostate cancer represents the second highest malignancy rate in men in all cancer diagnoses worldwide. The development and progression of prostate cancer is not completely understood yet at molecular level, but it has been reported that changes in the N-glycosylation of prostate-specific antigen (PSA) occur during tumor genesis. In this paper we report on the development and implementation of a high-throughput capillary electrophoresis based glycan analysis workflow for urinary PSA analysis. The technology utilizes selective, high yield single domain antibody based PSA capture, followed by preconcentration and capillary electrophoresis coupled with laser-induced fluorescence detection, resulting in high resolution N-glycan profiles. Urinary PSA glycan profiles were compared to a commercially available PSA standard revealing differences in their α2,3- and α2,6-sialylated isomers, proving the excellent selectivity of the suggested workflow. This is important as sialylation classification plays an important role in the differentiation between indolent, significant and aggressive forms of prostate cancer.

In the present study, we monitor the adsorption–desorption kinetics and adsorbed layer structure of the bacterial protein flagellin in the presence of Hofmeister salts by a surface sensitive label-free optical biosensor (optical waveguide lightmode spectroscopy, OWLS). The recorded OWLS data were analyzed by a computer code using a set of coupled differential equations modeling the adsorption–desorption process. By supposing reversibly and irreversibly adsorbed protein states with different adsorption footprints, the kinetic data could be perfectly fitted. We revealed that the proteins adsorbing in the presence of kosmotropic salts had smaller footprints, leading to a more oriented and densely packed layer. Kosmotropic salts increased both the adsorption rate constant and the transition rate constants from the reversibly to the irreversibly adsorbed state. In contrast, chaotropic salts increased the desorption rate constant and led to decreased adsorbed mass and a more loosely packed film. Neither circula...

The export signal recognized by the flagellum-specific export machinery is harbored within the highly conserved 26-47 segment of the disordered N-terminal part of Salmonella flagellin. In this work, we aimed to further localize the essential part of the export signal by deletion analysis and investigated how the length of the spacer segment preceding the signal affects export efficiency. Export signal variants were attached to a reporter protein, the CCP2 domain of human C1r protein, and export efficiency of the fusion constructs was studied. Our results suggest that almost any continuous oligopeptide of 8-10 residues within the 26-47 segment can efficiently direct flagellar export if preceded by a spacer segment of at least 15 amino acids without any specific sequential requirement.

The development of bacteria repellent surface coatings is critical in various fields ranging from biosensing to health care, biotechnology and food production. In the present study we exploit that the protein flagellin rapidly forms a dense and oriented monolayer on hydrophobic surfaces upon adsorption from aqueous solution. This oriented layer mimics the surface of bacterial flagellar filaments and has excellent bacteria repellent properties. In situ OWLS (Optical Waveguide Lightmode Spectroscopy) measurements were used to monitor on-line both the formation of the protein layer on the silanized sensor surface and subsequent bacterial adhesion. The adhered cells were also visualized by fluorescent microscopy and the formed protein film was characterized by AFM (Atomic Force Microscopy). In parallel control experiments, the adherence of bacteria was measured on bare hydrophobic surfaces as well. Both OWLS and microscopy results well confirmed that the flagellin coating drastically reduced the adhesion of E. coli cells. Therefore, a novel type of bacteria repellent layer made of flagellin is demonstrated.

This work aims at developing a novel method for fabricating 1D magnetite nanostructures with the help of mutagenized flagellar filaments. We constructed four different flagellin mutants displaying magnetite-binding motifs. Two of the mutants contained fragments of magnetosome-associated proteins from magnetotactic bacteria (MamI and Mms6), whereas for the other two mutants synthetic sequences were used. A magnetic selection procedure identified the mutant incorporating the loop segment from MamI to have the highest binding affinity towards magnetite. Filaments built from MamI loop-containing flagellin subunits were used as templates to form chains of magnetite nanoparticles along the filament by capturing them from suspension. Our study presents a proof of concept that flagellar filaments can be engineered to facilitite formation of 1D magnetite nanostructures under ambient conditions. In addition, it proves the interaction between MamI and magnetite, with implications for the role of the protein in magnetotactic bacteria.

The Salmonella FliS flagellar export chaperone is a highly α-helical protein. Proteolytic experiments suggest that FliS has a compact core. However, the calorimetric melting profile of FliS does not show any melting transition in the 25-110 °C temperature range. Circular dichroism measurements reveal that FliS is losing its helical structure over a broad temperature range upon heating. These observations indicate that FliS unfolds in a noncooperative way and its native state shows features reminiscent of the molten globule state of proteins possessing substantial structural plasticity. As FliS has several binding partners within the cell, conformational adaptability seems to be an essential requirement to fulfill its multiple roles.

Aims: Application of capillary electrophoresis with laser induced fluorescence detection (CE-LIF) to identify the N-glycosylation structures of serum and saliva IgA from healthy controls and patients with malignant hematological diseases having cytostatic treatment induced mild oral mucosal lesions. Background: Altered N-glycosylation of body fluid glycoproteins can be an effective indicator of most inflammatory processes. Immunoglobulin A (IgA) is the second highest abundant immunoglobulin and has a major role in the immune-defense against potential pathogen attacks. While IgA is abundant in serum, secretory immunoglobulin A (sIgA) is one of the most prevalent proteins in mucosal surfaces, such as in saliva. Objective: Our aim was to investigate the changes of IgA glycosylation in serum and saliva as a response to an administered cytostatic treatment in patients with malignant hematological disorders. Methods: Capillary electrophoresis with laser induced fluorescent detection (CE-LIF) was used to analyze the N-glycosylation profiles of Z(IgA1) partitioned immunoglobulin A in pooled serum and saliva of 10 control subjects and 8 patients with malignant hematological diseases having cytostatic treatment induced mild oral mucosal lesions. Results: Eight of 31 and four of 38 N-glycans in serum and saliva, respectively, showed significant (p Conclusion: The developed Z(IgA1) partitioning and the high resolution CE-LIF based glyocoanalytical methods provided an efficient and sensitive workflow to detect and monitor IgA glycosylation alterations in serum and saliva with the scope for widespread molecular medicinal use.

Thin films prepared by different technologies (electrodeposition, screen printing) were electrochemically investigated as sensitive layers for nitrates/nitrites. Bacterial flagellar filaments (special protein molecules) were engineered as sensitive biolayers for heavy metal detection.

The simple and cost-effective bottom-up fabrication of complex functionalized nanostructures is extensively researched today. Here, the alternating deposition of the negatively charged protein flagellin and a positively charged polyelectrolyte is studied. The multilayer buildup was followed in situ using Optical Waveguide Lightmode Spectroscopy (OWLS) revealing the deposited surface mass density in real time during the alternating deposition process. The nanostructure of the assembled films was investigated by Atomic Force Microscopy (AFM) measurements. When flagellin was applied in its natural filamentous form no distinct multilayer buildup was observed, the filaments assembled mainly into bundles. In contrast, when thermally treated filament solution or pure flagellin monomer solution was used a systematic linearly growing buildup was seen, and thick, relatively smooth films were fabricated. AFM investigations revealed that the polycation induced assembly of flagellin monomers into nanofilaments during the deposition process. Both the filament formation and the multilayer buildup were completely absent when a truncated flagellin variant – missing the disordered terminal regions – was applied. Since these regions are necessary for filament formation, we conclude that the linearly growing nature of the layer is a clear consequence of filament formation. Therefore, this study first reveals a new type of linearly growing polyelectrolyte multilayer buildup mechanism, when one of the components induces the self-assembly of the oppositely charged component, creating a complex, stable and smooth filamentous nanostructured coating. These composite films can find diverse applications in nanotechnology and in biomedical sciences since the variable D3 domain of flagellin subunits can be easily modified to express enzymatic, fluorescent or molecular binding properties on the surfaces of the filaments.

Flagellin, the main component of flagellar filaments, is a protein possessing polymerization ability. In this work, a novel fusion construct of xylanase A from B. subtilis and Salmonella flagellin was created which is applicable to build xylan-degrading catalytic nanorods of high stability. The FliC-XynA chimera when overexpressed in a flagellin deficient Salmonella host strain was secreted into the culture medium by the flagellum-specific export machinery allowing easy purification. Filamentous assemblies displaying high surface density of catalytic sites were produced by ammonium sulfate-induced polymerization. FliC-XynA nanorods were resistant to proteolytic degradation and preserved their enzymatic activity for a long period of time. Furnishing enzymes with self-assembling ability to build catalytic nanorods offers a promising alternative approach to enzyme immobilization onto nanostructured synthetic scaffolds.

In this work we addressed the problem how to fabricate self-assembling tubular nanostructures displaying target recognition functionalities. Bacterial flagellar filaments, composed of thousands of flagellin subunits, were used as scaffolds to display single-domain antibodies (nanobodies) on their surface. As a representative example, an anti-GFP nanobody was successfully inserted into the middle part of flagellin replacing the hypervariable surface-exposed D3 domain. A novel procedure was developed to select appropriate linkers required for functional internal insertion. Linkers of various lengths and conformational properties were chosen from a linker database and they were randomly attached to both ends of an anti-GFP nanobody to facilitate insertion. Functional fusion constructs capable of forming filaments on the surface of flagellin-deficient host cells were selected by magnetic microparticles covered by target GFP molecules and appropriate linkers were identified. TEM studies revealed that short filaments of 2–900 nm were formed on the cell surface. ITC and fluorescent measurements demonstrated that the fusion protein exhibited high binding affinity towards GFP. Our approach allows the development of functionalized flagellar nanotubes against a variety of important target molecules offering potential applications in biosensorics and bio-nanotechnology.

With the aim of creating one-dimensional magnetic nanostructures, we genetically engineered flagellar filaments produced by Salmonella bacteria to display iron- or magnetite-binding sites, and used the mutant filaments as templates for both nucleation and attachment of the magnetic iron oxide magnetite. Although nucleation from solution and attachment of nanoparticles to a pre-existing surface are two different processes, non-classical crystal nucleation pathways have been increasingly recognized in biological systems, and in many cases nucleation and particle attachment cannot be clearly distinguished. In this study we tested the magnetite-nucleating ability of four types of mutant flagella previously shown to be efficient binders of magnetite nanoparticles, and we used two other mutant flagella that were engineered to periodically display known iron-binding oligopeptides on their surfaces. All mutant filaments were demonstrated to be efficient as templates for the synthesis of one-dimensional magnetic nanostructures under ambient conditions. Both approaches resulted in similar final products, with randomly oriented magnetite nanoparticles partially covering the filamentous biological templates. In an external magnetic field, the viscosity of a suspension of the produced magnetic filaments showed a twofold increase relative to the control sample. The results of magnetic susceptibility measurements were also consistent with the magnetic nanoparticles occurring in linear structures. Our study demonstrates that biological templating can be used to produce one-dimensional magnetic nanostructures under benign conditions, and that modified flagellar filaments can be used for creating model systems in which crystal nucleation from solution can be experimentally studied.

A simple, reliable and cost-effective fluidic channel, fabricated by using double-sided pressure-sensitive tapes, is demonstrated here. A laser-cutting method is applied to engrave structures in sheets of the tapes. After peeling off the tape liners, the structures could be easily integrated at room temperature with label-free optical waveguide biochips without further modifications or additional processing steps. It is shown that the well-defined and controllable height of the channels is advantageous for stopped-flow measurements of analyte binding. The easy fabrication of a fully transparent integrated sensor unit – tape cuvette system is also demonstrated for parallel microscopic investigations. The transparent unit was used to on-line monitor the surface adhesion of Salmonella cells on poly-l-lysine-coated biochip surfaces, followed by the straightforward microscopic visualization of the adhered bacterial cells. The material of the double sided tape is stable in aqueous solutions. Furthermore, its material is biocompatible, making it ideal for biological applications. Excellent, stable and reversible bonding of the microstructured tapes to biocompatible plastic and glass is also demonstrated. The simplicity of the fabrication at ambient temperatures makes the developed processes appealing for lab-on-a-chip applications, particularly if the bonded biochips are precious.

Biomimetic coatings with cell-adhesion-regulating functionalities are intensively researched today. For example, cell-based biosensing for drug development, biomedical implants, and tissue engineering require that the surface adhesion of living cells is well controlled. Recently, we have shown that the bacterial flagellar protein, flagellin, adsorbs through its terminal segments to hydrophobic surfaces, forming an oriented monolayer and exposing its variable D3 domain to the solution. Here, we hypothesized that this nanostructured layer is highly cell-repellent since it mimics the surface of the flagellar filaments. Moreover, we proposed flagellin as a carrier molecule to display the cell-adhesive RGD (Arg-Gly-Asp) peptide sequence and induce cell adhesion on the coated surface. The D3 domain of flagellin was replaced with one or more RGD motifs linked by various oligopeptides modulating flexibility and accessibility of the inserted segment. The obtained flagellin variants were applied to create surface coatings inducing cell adhesion and spreading to different levels, while wild-type flagellin was shown to form a surface layer with strong anti-adhesive properties. As reference surfaces synthetic polymers were applied which have anti-adhesive (PLL-g-PEG poly( l -lysine)-graft-poly(ethylene glycol)) or adhesion inducing properties (RGD-functionalized PLL-g-PEG). Quantitative adhesion data was obtained by employing optical biochips and microscopy. Cell-adhesion-regulating coatings can be simply formed on hydrophobic surfaces by using the developed flagellin-based constructs. The developed novel RGD-displaying flagellin variants can be easily obtained by bacterial production and can serve as alternatives to create cell-adhesion-regulating biomimetic coatings. Statement of Significance In the present work, we show for the first time that - an oriented and dense monolayer of flagellin molecules mimics the surface of the bacterial flagellar filament. Consequently, the fabricated layer is completely cell repellent. - By genetically modifying flagellin, we incorporate cell adhesion regulating functionalities into this anti-adhesive coating. - We can easily tune the adhesion of living cells from completely cell repellent to highly adhesive.

The exact role of the metal ion, usually Mg(2+), in the catalysis of human 3-phosphoglycerate kinase, a well-studied two-domain enzyme, has not been clarified. Here we have prepared single and double alanine mutants of the potential metal-binding residues, D374 and D218. While all mutations weaken the catalytic interactions with Mg(2+), they surprisingly strengthen binding of both MgADP and MgATP, and the effects are even more pronounced for ADP and ATP. Thermodynamic parameters of binding indicate an increase in the binding entropy as a reason for the strengthening. In agreement with the experimental results, computer-simulated annealing calculations for the complexes of these mutants have supported the mobility of the nucleotide phosphates and, as a consequence, formation of their new interaction(s) within the active site. A similar type of mobility is suggested to be a characteristic feature of the nucleotide site of the wild-type enzyme, too, both in its inactive open conformation and in the active closed conformation. This mobility of the nucleotide phosphates that is regulated by the aspartate side chains of D218 and D374 through the complexing Mg(2+) is suggested to be essential in enzyme function.

In this study, we have reconstructed the statistical 3D structure of hundreds of nanometers thick surface immobilized flagellar filament protein layers in their native environment, in buffer solution. The protein deposition onto the surface activated Ta2O5 film was performed in a flow cell, and the immobilization process was followed by in situ spectroscopic ellipsometry. A multilayer optical model was developed, in that the protein layer was described by five effective medium sublayers. Applying this method, an in-depth analysis of the protein layer formation was performed. Based on the kinetics in the distribution of the surface mass density, the statistical properties of the filamentous film could be determined computationally as a function of the measurement time. It was also demonstrated that the 3D structure of the protein layer can be reconstructed based on the calculated in-depth mass density profile. The computational investigation revealed that the filaments can be classified into two individual groups in approximately equal ratio according to their orientation. In the first group the filaments are close to laying position, whereas in the second group they are in a standing position, resulting in a significantly denser sublayer close to the substrate than at a larger distance.

The hypervariable D3 domain of Salmonella flagellin, composed of residues 190-283, is situated at the outer surface of flagellar filaments. A flagellin mutant deprived of the complete D3 domain (ΔD3_FliC) exhibited a significantly decreased thermal stability (T(m) 41.9 °C) as compared to intact flagellin (T(m) 47.3 °C). However, the stability of filaments formed from ΔD3_FliC subunits was virtually identical with that of native flagellar filaments. While D3 comprises the most stable part of monomeric flagellin playing an important role in the stabilization of the other two (D1 and D2) domains, the situation is reversed in the polymeric state. Upon filament formation, ordering of the disordered terminal regions of flagellin in the core part of the filament results in the stabilization of the radially arranged D1 and D2 domains, and there is a substantial increase of stability even in the distant outermost D3 domain, which is connected to D2 via a pair of short antiparallel β-strands. Our experiments revealed that crosslinking the ends of the isolated D3 domain through a disulfide bridge gives rise to a stabilization effect reminiscent of that observed upon polymerization. It appears that the short interdomain linker between domains D2 and D3 serves as a stabilization center that facilitates propagation of the conformational signal from the filament core to the outer part of filament. Because D3 is a largely independent part of flagellin, its replacement by heterologous proteins or domains might offer a promising approach for creation of various fusion proteins possessing polymerization ability.

Protein filaments composed of thousands of subunits are promising candidates as sensing elements in biosensors. In this work in situ spectroscopic ellipsometry is applied to monitor the surface immobilization of flagellar filaments. This study is the first step towards the development of layers of filamentous receptors for sensor applications. Surface activation is performed using silanization and a subsequent glutaraldehyde crosslinking. Structure of the flagellar filament layers immobilized on activated and non-activated Si wafer substrates is determined using a two-layer effective medium model that accounted for the vertical density distribution of flagellar filaments with lengths of 300–1500 nm bound to the surface. The formation of the first interface layer can be explained by the multipoint covalent attachment of the filaments, while the second layer is mainly composed of tail pinned filaments floating upwards with the free parts. As confirmed by atomic force microscopy, covalent immobilization resulted in an increased surface density compared to absorption.

The occurrence of all di- and tripeptide segments of proteins was counted in a large data base containing about 119 000 residues. It was found that the abundance of the amino acids does not determine the frequency of the various di- and tripeptide segments. In addition, the frequency of the various tripeptides cannot be predicted from the observed pair-frequency values. The pair-frequency distribution of amino acids is highly asymmetrical, pairs formed from identical residues are generally preferred and amino acids cannot be clustered on the basis of their first neighbour preferences. These data indicate the existence of general short range regularities in the primary structure of proteins. The consequences of these short range regularities were studied by comparing Chou-Fasman parameters with analogous parameters determined from the results of conformational energy calculations of single amino acids. This comparison shows that Chou-Fasman parameters carry significant information about the environment of each amino acid. The success of the Chou-Fasman's prediction and the properties of the pair and triplet distribution of the amino acid residues suggest that every amino acid has a characteristic sequential residue environment in proteins. The observed preferences could be invoked, for example, in protein design or in the study of the evolutionary relationship of proteins.

Superparamagnetic Ni–Zn ferrite nanoparticles were synthesized in radiofrequency thermal plasma reactor from aqueous solutions of Ni- and Zn-nitrates. The nanoparticles were studied for protein purification performance in both quantitative and qualitative terms. For comparison, experiments were also performed by Ni-charged affinity chromatography. It was proved that the Ni–Zn ferrite nanoparticles effectively purified histidine-tagged proteins with a maximum protein binding capacity of about 7% (w/w). Gel electrophoresis demonstrated better purification characteristics for magnetic nanoparticles than for affinity chromatography.

The quality of flagellin films in terms of thickness and homogeneity was investigated by spectroscopic ellipsometry. Flagellin films were prepared in three steps: silanization, glutaraldehyde activation and finally the coating with proteins. The process of film preparation was optimized by varying the duration of the silanization and by testing sticking on different substrates including Si wafer covered with different thickness of silicon-oxide and also covered with a thin film of tantallum pentoxide. Spectroscopic ellipsometry was applied to gain in-depth information on the film properties for the optimization of the immobilization. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)

The hypervariable D3 domain of Salmonella flagellin, composed of the 190-285 segment, is the major determinant of flagellar antigenicity. D3 was cloned and overexpressed in E. coli. Although previous studies concluded that D3 is stabilized by interactions with the D2 domain, our calorimetric experiments have revealed that isolated D3 has a stable tertiary structure which is highly resistant against proteolytic digestion. Repeated heating experiments demonstrated that unfolding of D3 is reversible. Its small size and stable structure makes D3 a promising protein scaffold for the development of artificial binding proteins by directed evolution.

The axial structure of the bacterial flagellum is composed of many different proteins, such as hook protein and flagellin, and each protein forms a short or long axial segment one after another in a well-defined order along the axis. Under physiological conditions, most of these proteins are stable in the monomeric state in solution, and spontaneous polymerization appears to be suppressed, as demonstrated clearly for flagellin, probably to avoid undesirable self-assembly in the cytoplasmic space. However, no systematic studies of the possible associations between monomeric axial proteins in solution have been carried out. We therefore studied self and cross-association between hook protein, flagellin and three hook-associated proteins, HAP1, HAP2 and HAP3, in all possible pairs, by gel-filtration and analytical centrifugation, and found interactions in the following two cases only. Flagellin facilitated HAP3 aggregation into beta-amyloid-like filaments, but without stable binding between the two. Addition of HAP3 to HAP2 resulted in disassembly of preformed HAP2 decamers and formation of stable HAP2-HAP3 heterodimers. HAP2 missing either of its disordered terminal regions did not form the heterodimer, whereas HAP3 missing either of its disordered terminal regions showed stable heterodimer formation. This polarity in the heterodimer interactions suggests that the interactions between HAP2 and HAP3 in solution are basically the same as those in the flagellar axial structure. We discuss these results in relation to the assembly mechanism of the flagellum.

Flagella, the locomotion organelles of bacteria, extend from the cytoplasm to the cell exterior. External flagellar proteins are synthesized in the cytoplasm and exported by the flagellar type III secretion system. Soluble components of the flagellar export apparatus, FliI, FliH, and FliJ, have been implicated to carry late export substrates in complex with their cognate chaperones from the cytoplasm to the export gate. The importance of the soluble components in the delivery of the three minor late substrates FlgK, FlgL (hook–filament junction) and FliD (filament-cap) has been convincingly demonstrated, but their role in the transport of the major filament component flagellin (FliC) is still unclear. We have used continuous ATPase activity measurements and quartz crystal microbalance (QCM) studies to characterize interactions between the soluble export components and flagellin or the FliC:FliS substrate–chaperone complex. As controls, interactions between soluble export component pairs were characterized providing Kd values. FliC or FliC:FliS did not influence the ATPase activity of FliI alone or in complex with FliH and/or FliJ suggesting lack of interaction in solution. Immobilized FliI, FliH, or FliJ did not interact with FliC or FliC:FliS detected by QCM. The lack of interaction in the fluid phase between FliC or FliC:FliS and the soluble export components, in particular with the ATPase FliI, suggests that cells use different mechanisms for the export of late minor substrates, and the major substrate, FliC. It seems that the abundantly produced flagellin does not require the assistance of the soluble export components to efficiently reach the export gate.

Flagellin, which constructs supercoiled filaments of the bacterial flagellum, is very difficult to crystallize because of its strong tendency to polymerize. We therefore crystallized the F41 fragment of flagellin, which does not polymerize because terminal regions that play important roles in polymerization are cleaved off. F41 was crystallized by the hanging drop vapor diffusion method in a mixture of polyethylene glycol, glycerol, and isopropanol, with a reservoir solution covered with silicon oil. The two key factors for success in growing sufficiently large crystals were isopropanol and silicon oil, which worked well to reduce the otherwise very high nucleation rate that resulted in hundreds of tiny crystals. The crystals were grown to very thin plates with thickness less than 10 microm, which made the collection of diffraction data very difficult. Freezing and annealing of the crystals and irradiation at synchrotron beamlines had to be carried out by specific methods and under specific conditions for its structure analysis at 2.0-A resolution.

Thermodynamic investigations of flagellin from Salmonella typhimurium and its proteolytic fragments were conducted by differential scanning calorimetry (DSC) and circular dichroism (CD) melting measurements. A new method of analysis for a multi-state transition based on our original theoretical treatment of thermodynamic equations has been developed to analyze those data. The analysis of DSC curves confirmed the three thermodynamic domains of flagellin. The thermodynamic parameters of each domain were revised from those previously reported and the new values of the parameters have a good correlation to the apparent molecular masses of the morphological domains. CD melting measurements at far and near-UV wavelengths showed sequential unfolding of the domains. Therefore, we could reasonably assign the thermodynamically identified domains to the morphological domains. Further analysis of both DSC and CD data provided insights into the folding energetics of the multidomain structure of flagellin. An inner domain (Df1) of flagellin in the filament unfolds through a relatively broad transition, while the two outer domains unfold cooperatively and show sharp transitions. This indicates that the interdomain interactions between Df1 and D2 has different characteristics from the apparently more intimate interactions between D2 and D3. These characteristics suggest that flagellin is organized with relatively flexible domains and rigid domains, which appears to be responsible for the well-regulated assembly mechanism of the bacterial flagellar filament.

Hook forms a universal joint, which mediates the torque of the flagellar motor to the outer helical filaments. Domain organization of hook protein from Salmonella typhimurium was investigated by exploring thermal denaturation properties of its proteolytic fragments. The most stable part of hook protein involves residues 148 to 355 and consists of two domains, as revealed by deconvolution analysis of the calorimetric melting profiles. Residues 72–147 and 356–370 form another domain, while the terminal regions of the molecule, residues 1–71 and 371–403, avoid a compact tertiary structure in the monomeric state. These folding domains were assigned to the morphological domains of hook subunits known from EM image reconstructions, revealing the overall folding of hook protein in its filamentous state.

HAP2 forms a capping structure, which binds very tightly to the distal end of flagellar filaments and still allows insertion of flagellin subunits below the cap by an unknown mechanism. Terminal regions of HAP2 from Salmonella typhimurium were found to be quickly degraded by various proteases, indicating that HAP2 also possesses disordered terminal regions like other axial proteins of bacterial flagellum. Removal of these portions by trypsin results in a fragment of 40 kDa (HP40), which lacks 42 NH2-terminal and 51 COOH-terminal residues. HAP2 in solution readily associates into a decameric structure without any significant population of intermediate oligomeric forms. The HP40 fragments, however, do not form decamers, while they can assemble into pentamers, as revealed by chemical cross-linking and analytical ultracentrifugation. Decameric HAP2 also dissociates into pentamers and smaller oligomers upon a heat induced conformational transition around 36 degreesC. While the highly mobile terminal regions are immobilized in decameric HAP2 complexes, they are still largely disordered in the pentameric state. These results demonstrate that the intersubunit interactions within the pentamers are mainly through the HP40 portions, whereas the terminal regions are responsible for association of pentamers into decameric complexes. Several observations indicate that HAP2 performs its capping function as a pentamer. We suggest that binding of the pentameric HAP2 cap to the filament is mediated by the highly flexible terminal regions. Indeed, HP40 fragments are unable to cap the end of filaments, while removal of about 30 residues from both terminal regions of HAP2 results in a highly reduced capping ability. A model is presented to explain the molecular mechanism of capping, in which conformational entropy in the disordered terminal regions moderates the otherwise too tight HAP2-filament interactions to allow insertion of flagellin subunits below the cap.

Bacterial flagellum has a cap structure tightly attached to its distal end. The cap is an oligomeric assembly of HAP2 protein (also called FliD) and plays an essential role in the filament growth in vivo by preventing flagellin monomers from leaking out without polymerization. Electron micrographs of the HAP2 complex formed in solution showed exclusively a pentagonal shape, called "star-cap", which was thought to be the end-on view of the cap. The molecular mass roughly corresponded to a dodecamer of HAP2, and therefore a double-layered star-cap was modeled to be the cap. Here, we have observed the side view of the complex in electron micrographs. The images clearly show a rectangular shape, about 80 A wide and 180 A long, with a bipolar feature in its long axis, indicating that the complex is a bipolar pair of pentamers. A thin plate feature is identified at each end of the particle, which looks exactly like the one observed as the structure of the native filament cap. Together with the structure of the filament previously analyzed by electron cryomicroscopy, the results suggest that the cap is a pentamer with its thin plate exposed to the solvent and the other half plugged into the hole at the distal end of the filament, which is almost twice wider than its central channel. This also allows us to model the axial domain arrangement of flagellin subunit in the filament.

The cap of the bacterial flagellum is an oligomeric assembly of HAP2 protein (also called FliD), tightly attached to the tip of the flagellar filament. Flagellar growth does not occur in fliD-deficient mutants because flagellin monomers transported through the central channel of the flagellum leak out without polymerizing at the distal end. The structure of the cap complex is not known yet. An in vitro assembly of HAP2 proteins was found to have a pentagonal shape, while its molecular mass corresponded roughly to that of a dodecamer. To characterize the structure and assembly behavior of the complex formed in vitro in more detail, the stoichiometry of the complex and the association equilibrium have been studied. Crosslinking experiments now clearly show that the HAP2 complex is decameric. The assembly equilibrium is mainly between the monomer and decamer with a minor population of intermediate oligomers involved, and is highly dependent on the solution pH as well as the salt concentration: the fraction of the decamer sharply rises as the pH decreases from 8.5 to 8.0; the physiological concentration of salt partially suppresses the decamer formation. A preferential crosslinking within a pentameric unit together with a bipolar feature of the complex particle observed by electron microscopy suggests that the decamer is a bipolar pair of pentamers. Because of the polar nature of the filament cap structure, the pentamer is suggested to be the cap complex with its decamer forming surface involved in interactions with the filament.

Bacterial motility involves switching between the left and right supercoiled states of the flagellar filament. The polymorphism of this assembly of identical flagellin molecules has presented a structural puzzle. Supercoiling has been attributed to coexistence of two conformational states of the 11 nearly axially aligned protofilament strands of subunits. The helical parameters of straight filaments in the left (L) and right (R) lattice states have now been accurately determined by X-ray fiber diffraction. The 9 A resolution electron density map of the R-type filament, refined from the X-ray data, reveals the interlocked alpha-helical segments of the core portion, which constitute the inner and outer tubes. While the inner-tube domain interactions remain invariant, the strand joints in the outer tube can switch between the L- and R-state by 2-3 A axial shifts, which change the strand periodicity of approximately 50 A by 0.8 A. This bi-stable quaternary switching results in supercoiling. Based on the measured helical parameters of the L and R lattices and the switching model, the twist and curvature calculated for the ten possible supercoils are in quantitative accord with observed supercoiled forms of flagellar filaments.

The partial specific volume and adiabatic compressibility of flagellin, its F40 fragment deprived of the disordered terminal regions, from Ala-1 to Arg-65 and from Ser-451 to Arg-494, and the flagellar filament of Salmonella typhimurium were determined from the density and the sound velocity measurements at 15 degrees C. The partial specific volumes were 0.728 cm3/g, 0.745 cm3/g, and 0.734 cm3/g, and the partial specific adiabatic compressibilities were 4.0 x 10(-12) cm2/dyn, 6.7 x 10(-12) cm2/dyn, and 4.7 x 10(-12) cm2/dyn, for flagellin, F40, and the filament, respectively. The smaller values of flagellin than those of F40 are reasonably explained by the presence of disordered terminal regions, which are supposed to be highly hydrated by water molecules. The volume increase upon polymerization of flagellin into the filament is also confirmed by depolymerization under a high pressure. The smaller volume and compressibility of the filament compared with those of F40 suggest an extensive hydration of the filament on its complex surface structure, which surpasses the effect on the volume and compressibility by a possible increase in the cavity volume at intersubunit interfaces upon polymerization.

The surface adsorption of the protein flagellin was followed in situ using optical waveguide lightmode spectroscopy (OWLS). Flagellin did not show significant adsorption on a hydrophilic waveguide, but very rapidly formed a dense monolayer on a hydrophobic (silanized) surface. The homogeneous and isotropic optical layer model, which has hitherto been generally applied in OWLS data interpretation for adsorbed protein films, failed to characterize the flagellin layer, but it could be successfully modeled as an uniaxial thin film. This anisotropic modeling revealed a significant positive birefringence in the layer, suggesting oriented protein adsorption. The adsorbed flagellin orientation was further evidenced by monitoring the surface adsorption of truncated flagellin variants, in which the terminal protein regions or the central (D3) domain were removed. Without the terminal regions the protein adsorption was much slower and the resulting films were significantly less birefringent, implying that intact flagellin adsorbs on the hydrophobic surface via its terminal regions.

Flagellin has the ability to polymerize into long filaments under appropriate conditions. Our work aims at the construction of flagellin-based fusion proteins which possess polymerization ability and preserve the functional properties of the fusion partner as well. The hypervariable D3 domain of Salmonella flagellin, containing residues 190-283, is a good target for genetic engineering studies since it can be extensively modified or removed without disturbing the self-assembling ability. In this work a fusion construct of flagellin and the superfolder mutant of the green fluorescent protein were created by replacing D3 with superfolder green fluorescent protein (GFP). The obtained GFP variant was capable of forming stable, highly fluorescent filamentous assemblies. Our results imply that other proteins (enzymes, binding proteins, etc.) can also be furnished by polymerization ability in a similar way. This approach paves the way for the construction of multifunctional tubular nanostructures.

The flagellum-specific export system is a specialized type III export machinery, which exports external flagellar proteins through the central channel of the flagellar filament. A number of evidence indicates that short segments within the disordered N-terminal region of flagellar axial proteins are recognized by the flagellum-specific export apparatus. Recently, we have demonstrated that the 26-47 segment of Salmonella typhimurium flagellin is capable of mediating flagellar export. N-terminal flagellin segments containing the export signal combined with a hexahistidine tag can be attached to heterologous proteins (preferentially in the size range of 9-40 kDa) facilitating their secreted expression and easy purification from the medium. Certain over-expressed proteins that are easily degraded within the cells are found intact in the medium implying a potential application of this expression system for proteins of high proteolytic susceptibility.

The flagellum-specific export system is a specialized type III export machinery, which exports external flagellar proteins through the central channel of the flagellar filament. A number of evidence indicates that short segments within the disordered N-terminal region of flagellar axial proteins are recognized by the flagellum-specific export apparatus. Recently, we have demonstrated that the 26-47 segment of Salmonella typhimurium flagellin is capable of mediating flagellar export. N-terminal flagellin segments containing the export signal combined with a hexahistidine tag can be attached to heterologous proteins (preferentially in the size range of 9-40 kDa) facilitating their secreted expression and easy purification from the medium. Certain over-expressed proteins that are easily degraded within the cells are found intact in the medium implying a potential application of this expression system for proteins of high proteolytic susceptibility.

The aim of our work is to furnish enzymes with polymerization ability by creating fusion constructs with the polymerizable protein, flagellin, the main component of bacterial flagellar filaments. The D3 domain of flagellin, exposed on the surface of flagellar filaments, is formed by the hypervariable central portion of the polypeptide chain. D3 is not essential for filament formation. The concept in this project is to replace the D3 domain with suitable monomeric enzymes without adversely affecting polymerization ability, and to assemble these chimeric flagellins into tubular nanostructures. To test the feasibility of this approach, xylanase A (XynA) from B. subtilis was chosen as a model enzyme for insertion into the central part of flagellin. With the help of genetic engineering, a fusion construct was created in which the D3 domain was replaced by XynA. The flagellin-XynA chimera exhibited catalytic activity as well as polymerization ability. These results demonstrate that polymerization ability can be introduced into various proteins, and building blocks for rationally designed assembly of filamentous nanostructures can be created.