Search

Purpose: Debridement, Antibiotic Treatment, and Implant Retention (DAIR) is considered the first-line treatment for early acute Prosthetic Joint Infection (PJI). This study aims to evaluate the five year success rates of early acute PJI managed with DAIR taking into consideration the time from the index surgery., Materials and Methods: A retrospective analysis of medical charts for 291 consecutive patients with acute PJI occurring within the first three months after primary or revision arthroplasty was conducted. Patients were stratified into two groups based on DAIR timing: Group (A) patients who underwent DAIR within the first four weeks post-arthroplasty; Group (B) patients who underwent DAIR between five and 12 weeks post- arthroplasty. Success rate was defined as implant in place, without signs of infection and not under suppressive antibiotic treatment., Results: The overall five year success rate for the entire cohort at five years was 62.2%. The mortality rate during the study period was 8.2%. The five year success rate was 64.4% (141 of 219) for Group A and 55.6% (40 of 72) for Group B (p = 0.21). Including deceased patients without signs of infection and retained implants as successful cases, the five year success rates increased to 69.9% for Group A (153 out of 219) and 69.4% for Group B (50 out of 72). The implant survival rate at five years was 73% for Group A and 71% for Group B., Conclusion: Our findings indicate that there are no significant differences between patients who undergo a DAIR procedure within four weeks from those performed between week five and 12. Importantly, the overall success rate decreased from 75.6 to 62.2% in the last three years of follow-up., Competing Interests: Declarations. Human ethics and consent to participate: Human Ethics and Consent to Participate declarations: not applicable. AI tools use: GPT-3.5 was used for the execution of this article solely as a language corrector. Competing interests: The authors declare no competing interests., (© 2025. The Author(s).)

Background: Our aim was to evaluate the prevalence and impact of unexpected positive intraoperative cultures (UPICs) on the outcome of presumed aseptic total knee and hip revision surgery., Methods: Data regarding patients who underwent elective total hip or knee revision surgery from January 2003 to July 2017 due to preoperatively presumed aseptic reasons was retrospectively reviewed. Partial revisions and patients who had follow-ups below 60 months were excluded from the study. In all surgeries, at least 3 intraoperative samples were taken for microbial culture. Failure was defined as the need for rerevision due to any cause at 5 years and/or the need for antibiotic suppressive therapy. Overall, 123 total hip and 431 total knee revisions were eligible for the study. All cases had at least a 5 years follow-up., Results: There were 420 cases (75.8%) that had all cultures negative, 108 (19.5%) had a single UPIC, and 26 (4.7%) had either ≥2 UPICs for the same microorganism or 1 UPIC for a virulent microorganism. This latter group was not associated with a significantly higher failure rate (2 of 26, 7.7%) compared to those in the aseptic group (54 of 528, 10.2%). Revisions performed within the first 24 months after primary implantation had a higher 5-years rerevision rate (19.3 versus 8.4%, P = .01), mainly attributable to aseptic causes., Conclusions: Total hip and knee revisions with UPICs were not significantly associated with a higher rerevision risk at 5 years. Those revisions performed within the first 24 months after primary arthroplasty had a higher rate of any-cause failure., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Purpose: Failure to restore the femoral offset of the native hip is a potential cause of dysfunctional hip arthroplasty. The aim of this study was to report our experience of using a modular head-neck adapter in revision THA, specifically analyzing its usefulness as a tool to correct a slightly diminished femoral offset., Materials and Methods: This was a retrospective single-center study including all hip revisions performed at our institution from January 2017 to March 2022 where the BioBall TM head-neck metal adapter was used. The preoperative and one year follow-up modified Merle d'Aubigné hip score was used to evaluate functional outcomes., Results: Of a total of 34 cases included for revision, the head-neck adapter system was used specifically in six patients (17.6%) to increase femoral offset, retaining both the acetabular and femoral components. In this subgroup of patients, mean offset decrease after primary THA was 6.6 mm (4.0-9.1), equivalent to a mean 16.3% femoral offset reduction. The median modified Merle d'Aubigné score went from 13.3 preoperatively to 16.2 at one year follow-up., Conclusion: The use of a head-neck adapter is a safe and reliable procedure that may allow the surgeon to easily correct a slightly diminished femoral offset in a dysfunctional THA without the need to revise well-fixed prosthetic components., (© 2023. The Author(s).)

Purpose: We hypothesized that the intra-operative measurement of the femoral head may increase the accuracy of the acetabular cup size optimal selection in total hip arthroplasty (THA). The purpose of this clinical research was to analyze the correlation between the estimated cup size from intra-operative measurement of the femoral head and the pre-operative templated cup size., Methods: A prospective observational single-center study was conducted from June 2019 to January 2020 including primary THA (n = 100). All cases were pre-operatively templated. The measurement of the anterior-posterior diameter of the femoral head was routinely intra-operatively performed. Any definitive implanted cup was considered as "oversized" when the size was > 4 mm than the diameter of the native head., Results: The median (interquartile range) size of the implanted cup, pre-operative planned cup size, and diameter of the femoral head were measured 52 (50-54) mm, 50 (48-54) mm and 49 (45-51) mm, respectively. Pre-operative planned size cup accurately predicted the implanted cup or differed in only one size (2 mm) in 77 (78%) cases. Otherwise, intra-operative femoral head measurement method accurately predicted the implanted or differed in only one size (2 mm) in 51 (87%) cases (p = 0.097)., Conclusion: The intra-operative femoral head measurement is a simple and reliable tool to help the surgeons choose the best size of the acetabular cup and is as reliable as the pre-operative templating in order to avoid cup oversizing in THA. Utmost caution is warranted whenever the cup reamer is > 4 mm than the anterior-posterior diameter of the native head., (© 2022. The Author(s).)

Introduction: The impact of residual internal fixation devices on subsequent procedures about the hip has not been clearly well defined. The objective of the current study is to evaluate the outcome of hip arthroplasty after hardware retrieval as a one-stage replacement, to analyze possible differences related to the type of removed implant, and to assess the impact of unexpected intraoperative cultures during implant retrieval., Materials and Methods: We present a retrospective study including all those cases undergoing hip arthroplasty with concomitant hardware removal (cannulated screws, intramedullary nail, or dynamic hip screw) from 2005 to 2018. We evaluated demographics, intraoperative cultures, early infection rate, and other complications., Results: A total of 55 cases were included in the study. The median time between the implant surgery and the hip arthroplasty was 113 days. The removed devices included 6 cannulated screws, 34 intramedullary nails, and 15 dynamic hip screws. Up to 74.5% of the failed osteosynthesis belonged to intertrochanteric femoral fractures. Dislocation rate was 9.1% (1.8% requiring revision surgery), 25.5% of the cases needed further new surgeries after the hip arthroplasty, and 49.1% died during the follow-up period. Any-cause revision surgery and mortality rates were significantly increased after intramedullary nail removal. Intraoperative cultures were performed in 46 cases, and in 9 (16.4%), there was bacterial contamination: 6 cases (10.9%) presented one single positive culture and 3 (5.5%) presented ≥ 2 positive cultures for the same microorganism. A total of five cases (9.1%) presented early prosthetic joint infection that required debridement. None of these five cases had presented positive cultures at the implant removal., Conclusion: According to our results, hip arthroplasty with concomitant hardware removal is related to a high 5-year mortality rate, mainly when intramedullary nail is retrieved. Whereas a high risk of early prosthetic joint infection is associated, it seems not to be related to the elevated presence of unexpected positive cultures.

A plausible cause of persistent infection after septic hip revision may be the presence of nonviable osteomyelitic bone. Since surgical excision of these necrotic fragments is often challenging, the use of fluorescent tetracycline bone labeling (FTBL) as an intraoperative tool may pose an additional assessment aid to provide a visual index of surgical debridement. Methods : We present a single-center study performed in a university hospital from January 2018 to June 2020, in which all consecutive cases of chronic hip periprosthetic joint infection (PJI) undergoing revision using FTBL were retrospectively reviewed. In all cases, the patient was under treatment with tetracyclines at the moment of the revision surgery. During the surgery, all bone failing to fluoresce was considered nonviable and thus removed and sent for both culture and histology. Results : We include three cases in which the FTBL technique was used. In all cases, the histopathological examinations of the nonfluorescent removed bone were consistent with chronic osteomyelitis. Conclusion : The intraoperative use of FTBL successfully aided the surgeon to detect the presence of nonviable bone in all the presented cases of chronic prosthetic hip infection., Competing Interests: The authors declare that they have no conflict of interest., (Copyright: © 2021 Ernesto Muñoz-Mahamud et al.)

A retrospective study was performed to evaluate the cement mantle in two groups of patients treated with the acetabular components of cemented Exeter total hip arthroplasties (THAs). Two groups of 20 patients were compared: Group 1 received non-flanged acetabular cemented cups (Contemporary, Stryker) and Group 2 received flanged acetabular cemented cups (X3 Rim Fit, Stryker). Cups in Group 2 were implanted after using a rim cutter device. Group 2 showed better penetration of cement in zone 1 (10.76 mm compared with 2.93 mm; p = 0.008) and a thicker cement mantle in zone 1 (3.57 mm compared with 2.89 mm; p = 0.04). More cups in Group 2 had a cement mantle thickness less than 3 mm (30 % in Group 1 compared with 70 % in Group 2; p = 0.0039). No other radiological differences were observed. These results favor the use of a rim cutter device and flanged cup to improve the cement mantle for the acetabular components of cemented Exeter THAs. However, the improvements were less than expected. In view of the results of previous studies, further research is therefore needed to assess the value of this approach in improving the acetabular cement mantle.

Objective: Check the agreement of a preoperative digital templating, compared with the final result in the postoperative radiograph., Material and Method: The study was carried out on a 55 total hip prosthesis. A templating-software Neteous (Socincer, Gijón, Spain) was used. Agreement was measured using the Kappa Index for the stem offset or Lin Index for others variables: stem size, cup size, femoral neck length, and the distance from the center of rotation of the femoral head to the lesser trochanter. The percentage of accurate hits was also described., Results: Stem size: The exact success or error of only one size was of 61.6%. Quantitatively the Lin Index was 0.64 (substantial). Horizontal offset: satisfactory agreement was obtained (Kappa index of 0.75). In 6 cases (10.90%) was changed to lateralized during surgery, for more joint stability. Size of the cup: the agreement obtained was 0.67 (substantial) with a hit grade of 43.6%. Prosthetic neck length: the exact hit or error of only one size were found in 50.9%, moderate level of agreement. Distance from the center of rotation to the lesser trochanter: was observed for almost perfect agreement with Lin Index of 0.95. The exact percentage of hits or gap error less than 5mm was 74.5%., Discussion and Conclusion: In ours hands, the preoperative templating software analyzed, has provided acceptable agreement rates, when compared with the postoperative result. But it takes more works verified by independent observers., (Copyright © 2012 SECOT. Published by Elsevier Espana. All rights reserved.)