Search

In this work, a novel technique for continuous purification of biologics from a crude feedstock is demonstrated with equipment referred to as Fluidized Bed Adsorption System (FBRAS). The development and validation of such unit operations were performed utilizing lysozyme as a model protein and Relisorb™ SP405/EB as a carrier. The performance of FBRAS to carry out combined clarification and purification was evaluated by capturing of antifungal peptides directly from the lysed broth. The novel technique reduced the number of process unit operations from six to three without having an impact on purity. Overall productivity increased by 250% in comparison to the existing downstream processing routine., (© 2023 The Authors. Biotechnology and Bioengineering published by Wiley Periodicals LLC.)

We previously demonstrated that Bordetella pertussis, the etiologic agent of whooping cough, is able to survive inside human macrophages. The aim of this study was to examine the influence of macrophage polarization in the development of B. pertussis intracellular infections. To this end, primary human monocytes were differentiated into M1, M2a, or M2c macrophages and further infected with B. pertussis. Infected M1 macrophages showed a proinflammatory response evidenced by the production of TNF-α, IL-12p70, and IL-6. Conversely, infection of M2a and M2c macrophages did not induce TNF-α, IL-12p70, nor IL-6 at any time postinfection but showed a significant increase of M2 markers, such as CD206, CD163, and CD209. Interestingly, anti-inflammatory cytokines, like IL-10 and TGF-β, were induced after infection in the 3 macrophage phenotypes. B. pertussis phagocytosis by M1 macrophages was lower than by M2 phenotypes, which may be ascribed to differences in the expression level of B. pertussis docking molecules on the surface of the different phenotypes. Intracellular bactericidal activity was found to be significantly higher in M1 than in M2a or M2c cells, but live bacteria were still detected within the 3 phenotypes at the late time points after infection. In summary, this study shows that intracellular B. pertussis is able to survive regardless of the macrophage activation program, but its intracellular survival proved higher in M2 compared with the M1 macrophages, being M2c the best candidate to develop into a niche of persistence for B. pertussis., (© 2021 The Authors. Journal of Leukocyte Biology published by Wiley Periodicals LLC on behalf of Society for Leukocyte Biology.)

Ion exchange chromatography is one of the most widely used chromatographic technique for the separation and purification of important biological molecules. Due to its wide applicability in separation processes, a targeted approach is required to suggest the effective binding conditions during ion exchange chromatography. A surface energetics approach was used to study the interaction of proteins to different types of ion exchange chromatographic beads. The basic parameters used in this approach are derived from the contact angle, streaming potential, and zeta potential values. The interaction of few model proteins to different anionic and cationic exchanger, with different backbone chemistry, that is, agarose and methacrylate, was performed. Generally, under binding conditions, it was observed that proteins having negative surface charges showed strong to lose interaction (20 kT for Hannilase to 0.5 kT for IgG) with different anionic exchangers (having different positive surface charges). On the contrary, anionic exchangers showed almost no interaction (0-0.1 kT) with the positively charged proteins. An inverse behavior was observed for the interaction of proteins to cationic exchangers. The outcome from these theoretical calculations can predict the binding behavior of different proteins under real ion exchange chromatographic conditions. This will ultimately propose a better bioprocess design for protein separation., (© 2022 American Institute of Chemical Engineers.)

The successful industrial production of ethanol and fine chemicals requires the development of new biocatalytic reactors and support materials to achieve economically viable processes. In this work, a Stirred-Catalytic-Basket-BioReactor using various immobilizing foams as support material and compared to free cells were used, focusing mainly on; (i) effect of mass-transfer on cells physiology and (ii) ethanol productivity. The performance of the reactor was further evaluated by ethanol volumetric productivity, yield and time for process completion and it was found that the variation of ethanol production and diffusion of the substrate in fermentation process are co-related with the stirrer speed and initial glucose concentration. It was also observed that the time difference for glucose consumption between free and immobilized cells (alginate and sponges) tends to increase by increasing the glucose concentration in the medium. We found that at higher stirrer speed (500 rpm) when using higher glucose concentration (200 g/l), ethanol volumetric productivity increased significantly in the sponge (85 g/l) as compared to alginate beads (79 g/l) and free cells (60 g/l). From the data obtained, it can be concluded that sponges are the best support material for attaining higher ethanol productivity. A stirred catalytic basket bioreactor with yeast cells immobilized in polyethylene sponge gives higher ethanol production at a higher glucose consumption rate, and this productivity is due to higher mixing efficiency and reduced external as well as internal mass transfer limitations. The potentials of the reactor rank it as a remarkable ethanol/fine-chemical production approach that needs further investigations.

Whooping cough, which is caused by Bordetella pertussis and B. parapertussis, is a reemerging disease. New protective antigens are needed to improve the efficacy of current vaccines against both species. Using proteomic tools, it was here found that B. parapertussis expresses a homolog of AfuA, a previously reported new vaccine candidate against B. pertussis. It was found that this homolog, named AfuA Bpp , is expressed during B. parapertussis infection, exposed on the surface of the bacteria and recognized by specific antibodies induced by the recombinant AfuA cloned from B. pertussis (rAfuA). Importantly, the presence of the O-antigen, a molecule that has been found to shield surface antigens on B. parapertussis, showed no influence on antibody recognition of AfuA Bpp on the bacterial surface. The present study further showed that antibodies induced by immunization with the recombinant protein were able to opsonize B. parapertussis and promote bacterial uptake by neutrophils. Finally, it was shown that this antigen confers protection against B. parapertussis infection in a mouse model. Altogether, these results indicate that AfuA is a good vaccine candidate for acellular vaccines protective against both causative agents of whooping cough., (© 2017 The Societies and John Wiley & Sons Australia, Ltd.)

The influence of internal mass transfer on productivity as well as the performance of packed bed bioreactor was determined by varying a number of parameters; chitosan coating, flow rate, glucose concentration and particle size. Saccharomyces cerevisiae cells were immobilized in chitosan and non-chitosan coated alginate beads to demonstrate the effect on particle side mass transfer on substrate consumption time, lag phase and ethanol production. The results indicate that chitosan coating, beads size, glucose concentration and flow rate have a significant effect on lag phase duration. The duration of lag phase for different size of beads (0.8, 2 and 4 mm) decreases by increasing flow rate and by decreasing the size of beads. Moreover, longer lag phase were found at higher glucose medium concentration and also with chitosan coated beads. It was observed that by increasing flow rates; lag phase and glucose consumption time decreased. The reason is due to the reduction of external (fluid side) mass transfer as a result of increase in flow rate as glucose is easily transported to the surface of the beads. Varying the size of beads is an additional factor: as it reduces the internal (particle side) mass transfer by reducing the size of beads. The reason behind this is the distance for reactants to reach active site of catalyst (cells) and the thickness of fluid created layer around alginate beads is reduced. The optimum combination of parameters consisting of smaller beads size (0.8 mm), higher flow rate of 90 ml/min and glucose concentration of 10 g/l were found to be the maximum condition for ethanol production.

The biotechnological value of Aspergillus sojae ATCC 20235 (A. sojae) for production of pectinases in solid-state fermentation (SSF) has been demonstrated recently. However, a common drawback of fungal solid-state cultures is the poor diffusion of oxygen into the fungi that limits its growth and biological productivity. The bacterial Vitreoscilla hemoglobin (VHb) has favored the metabolism and productivities of various bacterial and yeast strains besides alleviating hypoxic conditions of its native host, but the use of VHb in filamentous fungi still remains poor explored. Based on the known effects of VHb, this study assessed its applicability to improve A. sojae performance in SSF. The VHb gene (vgb) under control of the constitutive Aspergillus nidulants gpdA promoter was introduced into the genome of A. sojae by Agrobacterium-mediated transformation. Successful fungal transformants were identified by fluorescence microscopy and polymerase chain reaction (PCR) analyses. In solid-state cultures, the content of protease, exo-polygalacturonase (exo-PG), and exo-polymethylgalacturonase (exo-PMG) of the transformed fungus (A. sojae vgb+) improved were 26, 60, and 44 % higher, respectively, in comparison to its parental strain (A. sojae wt). Similarly, biomass content was also 1.3 times higher in the transformant strain. No significant difference was observed in endo-polygalacturonase (endo-PG) content between both fungal strains, suggesting dissimilar effects of VHb towards different enzymatic productions. Overall, our results show that biomass, protease, and exo-pectinase content of A. sojae in SSF can be improved by transformation with VHb.

The influence of mass transfer on productivity as well as the performance of packed bed bioreactor was determined by varying a number of parameters; flow rate, glucose concentration and polymers (chitosan). Saccharomyces cerevisiae cells were immobilized in chitosan and non-chitosan coated alginate beads to demonstrate the effect on external mass transfer by substrate consumption time, lag phase and ethanol production. The results indicate that coating has a significant effect on the lag phase duration, being 30-40 min higher than non-coated beads. After lag phase, no significant change was observed in both types of beads on consumption of glucose with the same flow rate. It was observed that by increasing flow rates; lag phase and glucose consumption time decreased. The reason is due to the reduction of external mass transfer as a result of increase in flow rate as glucose is easily transported to and from the beads surface by diffusion. It is observed that chitosan acts as barrier for transfer of substrate and products, in and out of beads, at initial time of fermentation as it shows longer lag phase for chitosan coated beads than non-coated. Glucose consumption at low flow rate was lower as compared to higher flow rates. The optimum combination of parameters consisting of higher flow rates 30-90 ml/min and between 10 and 20 g/l of glucose was found for maximum production of ethanol.

Fusion of peptide-based tags to recombinant proteins is currently one of the most used tools for protein production. Also, immobilized metal ion affinity chromatography (IMAC) has a huge application in protein purification, especially in research labs. The combination of expression systems of recombinant tagged proteins with this robust chromatographic system has become an efficient and rapid tool to produce milligram-range amounts of proteins. IMAC-Ni(II) columns have become the natural partners of 6xHis-tagged proteins. The Ni(II) ion is considered as the best compromise of selectivity and affinity for purification of a recombinant His-tagged protein. The palladium(II) ion is also able to bind to side chains of amino acids and form ternary complexes with iminodiacetic acid and free amino acids and other sulfur-containing molecules. In this work, we evaluated two different cysteine- and histidine-containing six amino acid tags linked to the N-terminal group of green fluorescent protein (GFP) and studied the adsorption and elution conditions using novel eluents. Both cysteine-containing tagged GFPs were able to bind to IMAC-Pd(II) matrices and eluted successfully using a low concentration of thiourea solution. The IMAC-Ni(II) system reaches less than 20% recovery of the cysteine-containing tagged GFP from a crude homogenate of recombinant Escherichia coli, meanwhile the IMAC-Pd(II) yields a recovery of 45% with a purification factor of 13., (Copyright © 2014 John Wiley & Sons, Ltd.)

Background: Aspergillus sojae has been an important filamentous fungus in Biotechnology due to its use in diverse fermentative processes for the production of various food products. Furthermore, this fungus is a common expression system for the production of enzymes and other metabolites. The availability of molecular genetic tools to explore its biology is thus of big interest. In this study, an Agrobacterium tumefaciens-mediated transformation (ATMT) system for A. sojae was developed and its applicability evaluated., Results: The donor plasmid named pRM-eGFP was constructed for ATMT of A. sojae. This plasmid contains the ble and egfp genes in its transfer DNA element (T-DNA) to confer phleomycin resistance and express the enhanced green fluorescent protein (EGFP) in A. sojae, respectively. Agrobacterium tumefaciens (LBA4404) harboring the donor plasmid and A. sojae (ATCC 20235) were co-cultured under diverse conditions to achieve ATMT. The maximum number of transformed fungi was obtained after three days of co-culturing at 28°C, and selection with 50 μg/ml phleomycin. Polymerase chain reaction (PCR), fluorescence microscopy and Western Blot analysis for EGFP expression confirmed successful genomic integration of the T-DNA element in A. sojae. The T-DNA was mitotically stable in approximately 40% of the fungal transformants after four generations of sub-culturing under phleomycin pressure., Conclusion: We successfully established a new ATMT protocol for A. sojae. This transformation system should enable further protein expression studies on this filamentous fungus.

In recent years, affinity fusion-tag systems have become a popular technique for the purification of recombinant proteins from crude extracts. However, several drawbacks including the high expense and low stability of ligands, their leakage during operation, and difficulties in immobilization, make it important to further develop the method. The present work is concerned with the utilization of a ceramic fluorapatite (CFT)-based chromatographic matrix to overcome these drawbacks. A heptapeptide library exhibiting a range of properties have been synthesized and subjected to ceramic fluorapatite (CFT) chromatography to characterize their retention behavior as a function of pH and composition of the binding buffer. The specific binding and elution behavior demonstrates the possible application of CFT-binding peptides as tags for enhancing the selective recovery of proteins by CFT chromatography. To materialize this strategy, a phage-derived CFT-specific sequence KPRSVSG (Tag1) with/without a consecutive hexalysine sequence, KKKKKKKPRSVSG (Tag2), were fused at the C-terminus of an enhanced green fluorescent protein (eGFP). The resulting gene constructs H-eGFP, H-eGFP-Tag1 and H-eGFP-Tag2 were expressed in Escherichia coli strain BL-21, and the clarified cell lysate was applied to the CFT column equilibrated with binding buffer (20-50mM sodium phosphate, pH 6-8.4). Sodium phosphate (500mM) or 1M NaCl in the respective binding buffer was used to elute the fused proteins, and the chromatographic fractions were analyzed by gel electrophoresis. Both the yield and purity were over 90%, demonstrating the potential application of the present strategy., (Copyright © 2014 The Authors. Published by Elsevier B.V. All rights reserved.)

Background: Extracellular aspartic proteinase (MCAP) produced by Mucor circinelloides in solid state fermentations has been shown to possess milk clotting activity and represents a potential replacement for bovine chymosin in cheese manufacturing. Despite its prospects in the dairy industry, the molecular characteristics of this enzyme remain unknown. This work focuses on MCAP cloning and optimization of heterologous expression in Pichia pastoris, and characterization of the enzyme., Results: The cloning of cDNA sequence encoding MCAP from M. circinelloides was performed using a fragment of approximately 1 kbp as a probe. The fragment was amplified using non-specific primers designed from the NDIEYYG and KNNYVVFN consensus motifs from aspartic proteinases of different fungi. Gene specific primers were designed to amplify a full-length cDNA using SMART™ RACE PCR. MCAP was expressed in P. pastoris under the control of the constitutive GAP promoter. It was shown that P. pastoris secreted non-glycosylated and glycosylated MCAPs with molecular weights of 33 and 37 kDa, respectively., Conclusion: A novel MCAP was expressed in P. pastoris and efficiently secreted into the culture medium. The expression of the heterologous proteins was significantly increased due to advantages in codon usage as compared to other expression systems. The results suggest that P. pastoris could be exploited as a safe production platform for the milk clotting enzyme.

Peptide affinity tags have become efficient tools for the purification of recombinant proteins from biological mixtures. The most commonly used ligands in this type of affinity chromatography are immobilized metal ions, proteins, antibodies, and complementary peptides. However, the major bottlenecks of this technique are still related to the ligands, including their low stability, difficulties in immobilization, and leakage into the final products. A model approach is presented here to overcome these bottlenecks by utilizing macroporous ceramic fluorapatite (CFA) as the stationary phase in chromatography and the CFA-specific short peptides as tags. The CFA chromatographic materials act as both the support matrix and the ligand. Peptides that bind with affinity to CFA were identified from a randomized phage display heptapeptide library. A total of five rounds of phage selection were performed. A common N-terminal sequence was found in two selected peptides: F4-2 (KPRSMLH) and F5-4 (KPRSVSG). The peptide F5-4, displayed by more than 40% of the phages analyzed in the fifth round of selection, was subjected to further studies. Selectivity of the peptide for the chemical composition and morphology of CFA was assured by the adsorption studies. The dissociation constant, obtained from the F5-4/CFA adsorption isotherm, was in the micromolar range, and the maximum capacity was 39.4 nmol/mg. The chromatographic behavior of the peptides was characterized on a CFA stationary phase with different buffers. Preferential affinity and specific retention properties suggest the possible application of the phage-derived peptides as a tag in CFA affinity chromatography for enhancing the selective recovery of proteins., (Copyright © 2013 John Wiley & Sons, Ltd.)

In this study, the cDNA encoding the aspartic proteinase of Mucor mucedo DSM 809 has been identified by RNA ligased-mediated and oligo-capping rapid amplification of cDNA ends (RACE) technique. The gene contained an open reading frame of 1,200 bp and encoded for a signal peptide of 21 amino acid residues. Two N-glycosylation sites were observed within the identified sequence. The proteinase gene was cloned into the vector pGAPZαA and expressed in Pichia pastoris X-33 for the first time. The protein has been secreted in functionally active form into the culture medium. The expression system does not require any acid activation process. The factors affecting the expression level were optimized in shaking flask cultures. Maximum enzyme production was observed with an initial medium pH of 3.5 at 20 °C and 220 rpm shaking speed utilizing 4 % glucose as a carbon and energy source. The enzyme was purified with cation exchange chromatography and further studies revealed that the enzyme was secreted in glycosylated form. The purified enzyme exhibited remarkable sensitivity to thermal treatment and became completely inactivated after incubation at 55 °C for 10 min. These results indicated that the recombinant proteinase could be considered as a potential rennet candidate for the cheese-making industry.

Flavanols from tea have been reported to accumulate in the cell nucleus in considerable concentrations. The nature of this phenomenon, which could provide novel approaches in understanding the well-known beneficial health effects of tea phenols, is investigated in this contribution. The interaction between epigallocatechin gallate (EGCG) from green tea and a selection of theaflavins from black tea with selected cell nuclear structures such as model histone proteins, double stranded DNA and quadruplex DNA was investigated using mass spectrometry, Circular Dichroism spectroscopy and fluorescent assays. The selected polyphenols were shown to display affinity to all of the selected cell nuclear structures, thereby demonstrating a degree of unexpected molecular promiscuity. Most interestingly theaflavin-digallate was shown to display the highest affinity to quadruplex DNA reported for any naturally occurring molecule reported so far. This finding has immediate implications in rationalising the chemopreventive effect of the tea beverage against cancer and possibly the role of tea phenolics as "life span essentials".

Fibrous materials are proposed as novel chromatographic supports depicting high throughput and high product capacity. In this work, a composite fiber harboring strong cation-exchange moieties has been investigated. Such materials were characterized by a plethora of physical methods including degree of swelling (DS), scanning electron microscope (SEM), confocal laser scanning microscopy (CLSM), and Fourier transform infrared spectroscopy-attenuated total reflection (FTIR-ATR). The composite showed a high degree of grafting (∼30%) and exhibited a high swelling ratio (∼300%). Moreover, homogenous grafting and the development of an internal (functional) hydrogel were observed. The fibrous adsorbent was packed utilizing a designed "double roll" supported-structure and subsequently tested for packing efficiency and chromatography performance. The mentioned system showed similar packing efficiency of height equivalent to a theoretical plate (HETP) value and higher permeability coefficient (0.92 × 10⁻⁷ cm²) than commercial resins. Experimentally determined Peclet number (Pe) values were within the range 60-90, suggesting a close-to-plug-flow condition. Total ionic capacity of the fibrous adsorbent was determined by the transition pH method. A capacity of 6.5 mequiv./g was obtained. Moreover, a high dynamic binding capacity for lysozyme was found to be 283 mg/g. On the other hand, a bed of randomly packed fiber also demonstrated high-resolution ability when a mixture of model protein was utilized to that end. Resolution was maintained at high flow rates (up to 900 cm/h) and utilizing shorter gradient development routines. Direct sequestration of a model protein (lysozyme) was also possible from an artificial mixture containing 1.5% yeast homogenate. Summarizing, the composite fibrous adsorbents exhibited superior performance during early protein capture and intermediate-resolution applications., (Copyright © 2012. Published by Elsevier B.V.)

Protein adsorption onto hydrophobic interaction chromatography supports was studied by a surface-thermodynamics approach. To gather relevant experimental information, contact angle measurements and zeta potential determinations were performed on three different commercial adsorbent beads, Phenyl Sepharose 6 Fast Flow, Toyopearl Phenyl 650-C and Source 15 Phenyl, having soft to rigid backbone structure. Similar information was obtained for a collection of model proteins, lysozyme, bovine serum albumin (BSA), polygalacturonase, aminopeptidase, chymosin, aspartic protease, beta-galactosidase, human immunoglobulin G, and lactoferrin, were evaluated in the hydrated and in the dehydrated state. Based on the mentioned experimental data, calculations were performed to obtain the (interfacial) energy versus distance profiles of nine individual (model) proteins on (commercial) beads of three different types. All of these beads harbored the phenyl-ligand onto a matrix of differentiated chemical nature. Extended Derjaguin, Landau, Verwey, and Overbeek (DLVO) calculations were correlated with actual chromatographic behavior. Typical chromatography conditions were employed. The population of model proteins utilized in this study could be segregated into two groups, according to the minimum values observed for the resulting interaction energy pockets and the corresponding retention volumes (or times) during chromatography. Moreover, trends were also identified as a function of the type of adsorbent bead under consideration. This has revealed the influence of the physicochemical nature of the bead structure on the adsorption process and consequently, on the expected separation behavior., (© 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Filamentous fungi belonging to the order of Mucorales are well known as producers of aspartic proteinases depicting milk-clotting activity. The biosynthesis level, the biochemical characteristics, and the technological properties of the resulting proteinases are affected by the producer strain and the mode of cultivation. While the milk-clotting enzymes produced by the Rhizomucor spp. have been extensively studied in the past, much less is known on the properties and potential applications of the aspartic proteinases obtained for Mucor spp. Indeed, several Mucor spp. strains have been reported as a potential source of milk-clotting enzymes having unique technological properties. Both submerged fermentation and solid substrate cultivation are proven alternatives for the production of Mucor spp. aspartic proteinases. This review provides an overview on the bioprocessing routes to obtain large amounts of these enzymes, on their structural characteristics as related to their functional properties, and on their industrial applications with focus on cheese manufacturing.

Common limitations encountered during the direct recovery of bioproducts from an unclarified feedstock are related to the presence of biomass in such processing systems. Biomass-related effects can be described as biomass-to-support deposition and cell-to-cell aggregation. In this work, a number of chemical additives were screened for their ability to inhibit either biomass deposition, cell aggregation, or a combination of both effects. Several interacting pairs were screened. These were composed of (i) a commercial chromatographic matrix harbouring a variety of ligand types and (ii) intact yeast cells - as a model biomass type. Studies were performed based on partitioning tests, colloid deposition experiments, and sorption performance studies in expanded beds. Results indicated that the coating of anion-exchanger beads with the synthetic polymer PVP 360 alleviated biomass deposition and consequently restored EBA process performance. This behaviour correlated well with calculations performed according to the XDLVO approach: the secondary (interaction) free energy pockets decreased from -230 kT to -100 kT in the absence and in the presence of PVP 360, respectively. Experiments performed in parallel demonstrated that total binding capacity for the model protein (BSA) - under dynamic conditions - remained almost constant (≈ 55.7 kg m(-3)). Other combinations of additives and adsorbents were tested. However, no solution chemistry was able to inhibit biomass deposition onto strong (composite) ion exchangers. Moreover, yeast cell deposition was only marginally decreased when hydrophobic interaction and pseudo-affinity supports were explored. The utilization of non-toxic polymers could help to avoid detrimental biomass deposition during expanded bed adsorption of bioproducts and other direct contact sequestration methods., (Copyright © 2010 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.)

Surface charge, molecular weight, and folding state are known to influence protein chromatographic behaviour onto ion exchangers. Experimentally, information related to such factors can be gathered via 2-DE methods. The application of 2-D PAGE under denaturing/reducing conditions was already shown to reveal separation trends within a large protein population from cell extracts. However, ion-exchange chromatography normally runs under native conditions. A tailored protocol consisting in a first separation based on IEF on Immobiline strips under native conditions followed by a second dimension SDS-PAGE run was adopted. The chromatographic versus electrophoretic separation behaviours of two model proteins, thaumatin (TAU) and BSA, were compared to better understand which proteomic routine would be better suited to anticipate IEX chromatographic separations. It was observed that the information contained in the pI value obtained with the adapted 2-DE protocol showed better correlation with the IEX chromatographic behaviour. On the other hand, chromatographic separations performed in the presence of urea as a denaturant have demonstrated the potential influence of hydrodynamic radius/conformation on protein separation. Moreover, the information provided by such 2-D system correlated well with the chromatographic behaviour of an additional set of pure proteins. An initial prediction of protein ion-exchange chromatographic behaviour could be possible utilizing an experimental approach based on 2-DE running under milder chemical conditions. This technique provides information that more closely resembles the separation behaviour observed with a complex biotechnological feedstock.

Protein separation during ion-exchange chromatography implies complex physicochemical events. This work has evaluated the chromatographic behaviour of a complex cell proteome on commercial agarose-based adsorbents. Various ligand types in the cation- and anion-exchange mode were studied. ANX-Sepharose, a weak anion exchanger, performed similarly to the strong anion exchanger-type materials. Proteomic tools were applied in order to understand protein separation. Experimental evidence showed a correlation between apparent isoelectric point distributions and the mobile phase conductivity. Molecular weight distributions were unaffected by the elution position. On the basis of two-dimensional electrophoresis, operational windows were described having typical minor contaminants. These could be annotated for future implementation of in silico downstream processing.