Search

Abstract: The effect of ceria was studied on the oxidative coupling of methane (OCM) with Ce-doped La2O3 in a La:Ce molar ratio of 75:25 using two preparation methods. The characterisation techniques used were XRD and XPS. The results revealed high concentration of oxygen vacancies. Different types of ions (Ce3+ +Ce4+) were detected. More surface Ce3+ and higher ratio [(O2 2― +O—)/ O2―] were obtained in the oxide synthesised by the solvothermal method, affecting the OCM reaction in terms of higher C2 hydrocarbons selectivity. This was ascribed to the higher relative amount of O― species on the catalyst surface. [Copyright &y& Elsevier]

Electricity from the combination of photovoltaic panels and wind turbines exhibits potential benefits towards the sustainable cities transition. Nevertheless, the highly fluctuating and intermittent character limits an extended applicability in the energy market. Particularly, batteries represent a challenging approach to overcome the existing constraints and to achieve sustainable urban energy development. On the basis of the market roll-out and level of technological maturity, five commercially available battery technologies are assessed in this work, namely, lead–acid, lithium manganese oxide, nickel–cadmium, nickel–metal hydride, and vanadium redox flow. When considering sustainable development, environmental assessments provide valuable information. In this vein, an environmental analysis of the technologies is conducted using a life cycle assessment methodology from a cradle-to-gate perspective. A comparison of the environmental burden of battery components identified vanadium redox flow battery as the lowest environmental damage battery. In terms of components, electrodes; the electrolyte; and the set of pumps, motors, racks, and bolts exhibited the greatest environmental impact related to manufacturing. In terms of materials, copper, steel, sulphuric acid, and vanadium were identified as the main contributors to the midpoint impact categories. The results have highlighted that challenging materials 4.0 are still needed in battery manufacturing to provide sustainable technology designs required to the future urban planning based on circular economy demands. [ABSTRACT FROM AUTHOR]

In Europe, science and innovation are boosting the agri-food sector and, in parallel, are helping to decrease greenhouse gas emissions (GHG) and European dependency on non-renewable resources. Currently, it is well-known that this sector contributes to the consumption of energy and material resources, causing significant environmental impacts that require a complex and comprehensive environmental evaluation in order to manage them effectively. This becomes even more complicated when new technologies are reaching the level of technological maturity needed to be installed in the production lines. To address this scientific challenge, the life cycle assessment (LCA) has been used in this paper to evaluate the potential of pulsed electric fields (PEF) technology at an industrial scale to facilitate the steam peeling of tomato fruits. Considering the thermo-physical peeling stage, the LCA has shown that PEF technology is environmentally friendly, because when PEF technology is applied, all the considered environmental indicators improve between 17% and 20%. [ABSTRACT FROM AUTHOR]