Search

Making new van der Waals materials with electronic or magnetic functionality is a chemical design challenge for the development of two-dimensional nanoelectronic and energy conversion devices. We present the synthesis and properties of the van der Waals material Bi4O4SeCl2, which is a 1:1 superlattice of the structural units present in the van der Waals insulator BiOCl and the three-dimensionally connected semiconductor Bi2O2Se. The presence of three anions gives the new structure both the bridging selenide anion sites that connect pairs of Bi2O2 layers in Bi2O2Se and the terminal chloride sites that produce the van der Waals gap in BiOCl. This retains the electronic properties of Bi2O2Se, while reducing the dimensionality of the bonding network connecting the Bi2O2Se units to allow exfoliation of Bi4O4SeCl2 to 1.4 nm height. The superlattice structure is stabilised by the configurational entropy of anion disorder across the terminal and bridging sites. The reduction in connective dimensionality with retention of electronic functionality stems from the expanded anion compositional diversity.

The covalent coupling of porphine molecules on Au(111) is studied by scanning probe microscopy experiments and density functional theory. At sufficient temperatures, dehydrogenative C–C coupling of...

The generation of hydrogen from water using light is currently one of the most promising alternative energy sources for humankind but faces significant barriers for large-scale applications due to the low efficiency of existing photo-catalysts. In this work we propose a new route to fabricate nano-hybrid materials able to deliver enhanced photo-catalytic hydrogen evolution, combining within the same nanostructure, a plasmonic antenna nanoparticle and semiconductor quantum dots (QDs). For each stage of our fabrication process we probed the chemical composition of the materials with nanometric spatial resolution, allowing us to demonstrate that the final product is composed of a silver nanoparticle (AgNP) plasmonic core, surrounded by satellite Pt decorated CdS QDs (CdS@Pt), separated by a spacer layer of SiO2 with well-controlled thickness. This new type of photoactive nanomaterial is capable of generating hydrogen when irradiated with visible light, displaying efficiencies 300% higher than the constituting photo-active components. This work may open new avenues for the development of cleaner and more efficient energy sources based on photo-activated hydrogen generation.

Covalent organic framework nanosheets (CONs), fabricated from twodimensional covalent organic frameworks (COFs), present a promising strategy for incorporating atomically distributed catalytic metal centers into well-defined pore structures with desirable chemical environments. Here, a series of CONs was synthesized by embedding single cobalt sites that were then evaluated for photocatalytic carbon dioxide reduction. A partially fluorinated, cobalt-loaded CON produced 10.1 μmol carbon monoxide with a selectivity of 76%, over 6 hours irradiation under visible light (TON = 28.1), and a high external quantum efficiency (EQE) of 6.6% under 420 nm irradiation in the presence of an iridium dye. The CONs appear to act as a semiconducting support, facilitating charge carrier transfer between the dye and the cobalt centers, and this results in a performance comparable with that of the state-of-the-art heterogeneous catalysts in the literature under similar conditions. The ultrathin CONs outperformed their bulk counterparts in all cases, suggesting a general strategy to enhance the photocatalytic activities of COF materials.

Hydration layers play a key role in many technical and biological systems, but our understanding of these structures remains very limited. Here, we investigate the molecular processes driving hydration of a chiral metal-organic surface, bitartrate on Cu(110), which consists of hydrogen-bonded bitartrate rows separated by exposed Cu. Initially water decorates the metal channels, hydrogen bonding to the exposed O ligands that bind bitartrate to Cu, but does not wet the bitartrate rows. At higher temperature, water inserts into the structure, breaks the existing intermolecular hydrogen bonds, and changes the adsorption site and footprint. Calculations show this process is driven by the creation of stable adsorption sites between the carboxylate ligands, to allow hydration of O-Cu ligands within the interior of the structure. This work suggests that hydration of polar metal-adsorbate ligands will be a dominant factor in many systems during surface hydration or self-assembly from solution.

Titanium implants in orthopedic applications can fail due to infection and impaired integration into the host. Most research efforts that facilitate osseointegration of the implant have not considered infection, and vice versa. Moreover, most infection control measures involve the use of conventional antibiotics which contributes to the global epidemic of antimicrobial resistance. Nitric oxide (NO) is a promising alternative to antibiotics, and while researchers have investigated NO releasing coatings, there are few reports on the function/robustness or the mechanism of NO release. Our comprehensive mechanistic study has allowed us to design, characterize, and optimize NO releasing coatings to achieve maximum antimicrobial efficacy toward bacteria with minimum cytotoxicity to human primary osteoblasts in vitro. As the antibiotic era is coming to an end and the future of infection control continues to demand new alternatives, the coatings described herein represent a promising therapeutic strategy for use in orthopedic surgeries.

The global threat of antimicrobial resistance is driving an urgent need for novel antimicrobial strategies. Functional surfaces are essential to prevent spreading of infection and reduce surface contamination. In this study we have fabricated and characterized multiscale-functional nanotopographies with three levels of functionalization: (1) nanostructure topography in the form of silicon nanowires, (2) covalent chemical modification with (3-aminopropyl)triethoxysilane, and (3) incorporation of chlorhexidine digluconate. Cell viability assays were carried out on two model microorganisms E. coli and S. aureus over these nanotopographic surfaces. Using SEM we have identified two growth modes producing distinctive multicellular structures, i.e. in plane growth for E. coli and out of plane growth for S. aureus. We have also shown that these chemically modified SiNWs arrays are effective in reducing the number of planktonic and surface-attached microorganisms.

Bimetallic Pt catalysts are of interest as water redox catalysts in low temperature fuel cells. Here we compare water and hydroxyl adsorption on Pt-Ni(111) films and a PtNi(111) alloy surface with the behaviour on the pure metals. Whereas water adsorbs and desorbs intact from close packed Pt and Ni, it dissociates on PtNi surfaces to form adsorbed hydroxyl and hydrogen. Reactivity to water increases in the order Pt(111) < monolayer Pt-Ni(111) < multilayer (2-6 ML) Pt-Ni(111) ∼ PtNi(111) surface alloy and does not scale directly with the Pt strain. Hydroxyl can also be formed by reaction with pre-adsorbed O and is less stable than on pure Pt, decomposing to water and O in a broad peak near 180 K, 20 K lower than on Pt(111). The reduced stability of OH on Pt-Ni(111) films is common to all the PtNi surfaces and consistent with bimetallic PtNi surfaces showing less blocking by OH during the oxygen reduction reaction.

Water and its fragments are present on metal surfaces under all but the most extreme conditions, acting both as a reactive species and as a ligand in ways that have yet to be fully explored. This r...

Making new van der Waals materials with electronic or magnetic functionality is a chemical design challenge for the development of two-dimensional nanoelectronic and energy conversion devices. We present the synthesis and properties of the van der Waals material Bi4O4SeCl2, which is a 1:1 superlattice of the structural units present in the van der Waals insulator BiOCl and the three-dimensionally connected semiconductor Bi2O2Se. The presence of three anions gives the new structure both the bridging selenide anion sites that connect pairs of Bi2O2 layers in Bi2O2Se and the terminal chloride sites that produce the van der Waals gap in BiOCl. This retains the electronic properties of Bi2O2Se while reducing the dimensionality of the bonding network connecting the Bi2O2Se units to allow exfoliation of Bi4O4SeCl2 to 1.4 nm height. The superlattice structure is stabilized by the configurational entropy of anion disorder across the terminal and bridging sites. The reduction in connective dimensionality with retention of electronic functionality stems from the expanded anion compositional diversity.

As the current global threat of antimicrobial resistance (AMR) persists, developing alternatives to antibiotics that are less susceptible to resistance is becoming an urgent necessity. Recent advances in biomaterials have allowed for the development and fabrication of materials with discrete surface nanotopographies that can deter bacteria from adhering to their surface. Using binary polymer blends of polystyrene (PS), poly(methyl methacrylate) (PMMA) and polycaprolactone (PCL) and varying their relative concentrations, PS/PCL, PS/PMMA and PCL/PMMA polymer demixed thin films were developed with nanoisland, nanoribbon and nanopit topographies. In the PS/PCL system, PS segregates to the air-polymer interface, with the lower solubility PCL preferring the substrate-polymer interface. In the PS/PMMA and PCL/PMMA systems, PMMA prefers the air-polymer interface due to its greater solubility and lower surface energy. The anti-adhesion efficacy of the demixed films were tested against Pseudomonas aeruginosa (PA14). PS/PCL and PCL/PMMA demixed films showed a significant reduction in cell counts adhered on their surfaces compared to pure polymer control films, while no reduction was observed in the counts adhered on PS/PMMA demixed films. While the specific morphology did not affect the adhesion, a relationship between bacterial cell and topographical surface feature size was apparent. If the surface feature was smaller than the cell, then an anti-adhesion effect was observed, if the surface feature was larger than the cell, then the bacteria preferred to adhere.

Smart antimicrobial surfaces are a powerful tool to prevent bacterial colonization at surfaces. In this work, we report a successful strategy for the functionalization of polydimethylsiloxane (PDMS) surfaces, widely used in medical devices, with salicylic acid (SA), a biocide approved for use in humans. Antimicrobial PDMS surfaces were fabricated via a rational design in which bifunctional silane linker molecules were covalently grafted onto the PDMS via one end, while soft intermolecular interactions with SA were generated at the other end to enable reversible load and release of the biocide. A molecular level understanding of the interface was obtained using attenuated total reflectance Fourier transform infrared, Raman, and X-ray photoelectron spectroscopies, alongside density functional theory calculations. These reveal that the linker molecules dock the SA molecules at the surface via a 1:1 complexation interaction. Furthermore, each 1:1 complex acts as a nucleation point onto which multiple stacks of the biocide are subsequently stabilized via a combination of H-bonding and π-π stacking interactions, thus significantly enhancing SA uptake at the interface. The antimicrobial activity of these surfaces against model Gram-negative and Gram-positive bacteria represented by

Heterogeneous ice nucleation at solid surfaces impacts many areas of science, from environmental processes, such as precipitation, to microbiological systems and food processing, but the microscopic mechanisms underpinning nucleation remain unclear. Discussion of ice growth has often focused around the role of the surface in templating the structure of water, forcing the first layer to adopt the registry of the underlying substrate rather than that of ice. To grow a thick ice film, water in the first few ice layers must accommodate this strain, but understanding how this occurs requires detailed molecular-scale information that is lacking. Here we combine scanning tunneling microscopy, low-energy electron diffraction, and work-function measurements with electronic structure calculations to investigate the initial stages of ice growth on a Pt alloy surface, having a lattice spacing 6% larger than ice. Although the first layer of water forms a strictly commensurate hexagonal network, this behavior does not extend to the second layer. Instead, water forms a 2D structure containing extended defect rows made from face-sharing pentamer and octamer rings. The defect rows allow the majority of second-layer water to remain commensurate with the solid surface while compensating lateral strain by increasing the water density close to that of an ice surface. The observation of octamer–pentamer rows in ice films formed on several surfaces suggests that the octamer–pentamer defect motif acts as a flexible strain relief mechanism in thin ice films, providing a mechanism that is not available during the growth of strained films in other materials, such as semiconductors., Journal of the American Chemical Society, 141 (21), ISSN:0002-7863, ISSN:1520-5126

Direct activation of C H bonds provides a powerful and generic route for connecting different porphyrin building blocks at the Cu(110) surface. C H bond breaking followed by organometallic C metal C or C C covalent coupling leads to a variety of macromolecular products at the surface. The final products created are controlled by a number of factors including the adsorption conformation of the monomer, which determines the sites at which C H bond breaking is favored. Product formation is also controlled by steric factors that determine which couplings are realizable. Furthermore, the accommodation of the product at the surface plays a decisive role and leads to strong selectivity in product synthesis. In all cases, a dehydrogenative coupling mechanism is initiated at the surface where C H bonds are broken and the dissociated hydrogens recombine and desorb from the surface, leading to clean synthesis. The success and applicability of using the C H group as a synthon in on-surface synthesis is demonstrated on the Cu(110) surface, enabling a range of unfunctionalized porphyrins to be directly coupled together in a highly generic manner. The generality of this approach is also key in creating organic–organic heterostructures at a surface in which different monomers and topologies can be covalently bonded together at the surface with ease.

Ice formation is a complex cooperative process that is almost invariably catalysed by the presence of an interface on which ice crystals nucleate. As yet there is no clear picture of what factors make a surface particularly good at nucleating ice, but the importance of having a template with a suitable lattice parameter has often been proposed. Here we report the contrasting wetting behaviour of a series of pseudomorphic surfaces, designed to form an ordered template that matches the arrangement of water in a bulk ice Ih(0001) bilayer. The close-packed M(111) surfaces (M = Pt, Pd, Rh, Cu and Ni) form a (√3 × √3) R30° Sn substitutional alloy surface, with Sn atoms occupying sites that match the symmetry of an ice bilayer. The lattice constant of the alloy changes from 4% smaller to 7% greater than the lateral spacing of ice across the series. We show that only the PtSn surface, with a lattice parameter some 7% greater than that of a bulk ice layer, forms a stable water layer, all the other surfaces being non-wetting and instead forming multilayer ice clusters. This observation is consistent with the idea that the repeat spacing of the surface should ideally match the O-O spacing in ice, rather than the bulk ice lattice parameter, in order to form a continuous commensurate water monolayer. We discuss the role of the lattice parameter in stabilising the first layer of water and the factors that lead to formation of a simple commensurate structure rather than an incommensurate or large unit cell water network. We argue that lattice match is not a good criteria for a material to give low energy nucleation sites for bulk ice, and that considerations such as binding energy and mobility of the surface layer are more relevant.

Tin–platinum alloy surfaces show a remarkable activity in the fuel cell reaction, oxidizing and removing CO that would otherwise block reaction on pure Pt. This so-called “bifunctional” mechanism has been attributed to OH adsorption on Sn and CO adsorption on Pt, reducing site competition, and poisoning by CO. In this study, we examine the effect of water adsorption on the structure of the ordered Sn/Pt(111) (√3 × √3)R30° surface alloy in order to relate the existing structural data on the behavior of Sn/Pt surfaces to the nature of the adsorbate. The Sn/Pt surface structure was investigated by surface X-ray diffraction (SXRD) and low-energy electron diffraction, and compared to theoretical models obtained from density functional theory and with structural determinations from previous in situ electrochemical experiments. We find that adsorbed water induces a 0.16 A outward relaxation in the Sn position, similar to that previously ascribed to OH adsorption in electrochemical SXRD measurements. We review th...

© 2017 by the authors. The ability of nitric oxide (NO)-releasing polymer coatings to prevent biofilm formation is described. NO-releasing coatings on (poly(ethylene terephthalate) (PET) and silicone elastomer (SE)) were fabricated using aminosilane precursors. Pristine PET and SEwere oxygen plasma treated, followed by immobilisation of two aminosilane molecules: N-(3-(trimethoxysilyl)propyl)diethylenetriamine (DET3) and N-(3-trimethoxysilyl)propyl)aniline (PTMSPA). N-diazeniumdiolate nitric oxide donorswere formed at the secondary amine sites on the aminosilane molecules producing NO-releasing polymeric coatings. The NO payload and release were controlled by the aminosilane precursor, as DET3 has two secondary amine sites and PTMSPAonly one. The antibacterial efficacy of these coatingswas tested using a clinical isolate of Pseudomonas aeruginosa (PA14). All NO-releasing coatings in this study were shown to significantly reduce P. aeruginosa adhesion over 24 h with the efficacy being a function of the aminosilane modification and the underlying substrate. These NO-releasing polymers demonstrate the potential and utility of this facile coating technique for preventing biofilms for indwelling medical devices.

AIMS: Establishing biochemical markers of pre-hypertension and early hypertension could help earlier diagnostics and therapeutic intervention. We assess dynamics of junctional adhesion molecule-A (JAM-A) expression in rat models of hypertension and test whether JAM-A expression could be driven by angiotensin (ANG) II and whether JAM-A contributes to the progression of hypertension. We also compare JAM-A expression in normo- and hypertensive humans.METHODS AND RESULTS: In pre-hypertensive and spontaneously hypertensive rats (SHRs), JAM-A protein was overexpressed in the brainstem microvasculature, lung, liver, kidney, spleen, and heart. JAM-A upregulation at early and late stages was even greater in the stroke-prone SHR. However, JAM-A was not upregulated in leucocytes and platelets of SHRs. In Goldblatt 2K-1C hypertensive rats, JAM-A expression was augmented before any increase in blood pressure, and similarly JAM-A upregulation preceded hypertension caused by peripheral and central ANG II infusions. In SHRs, ANG II type 1 (AT(1)) receptor antagonism reduced JAM-A expression, but the vasodilator hydralazine did not. Body-wide downregulation of JAM-A with Vivo-morpholinos in juvenile SHRs delayed the progression of hypertension. In the human saphenous vein, JAM-A mRNA was elevated in hypertensive patients with untreated hypertension compared with normotensive patients but reduced in patients treated with renin-angiotensin system antagonists.CONCLUSION: Body-wide upregulation of JAM-A in genetic and induced models of hypertension in the rat precedes the stable elevation of arterial pressure. JAM-A upregulation may be triggered by AT(1) receptor-mediated signalling. An association of JAM-A with hypertension and sensitivity to blockers of ANG II signalling were also evident in humans. We suggest a prognostic and possibly a pathogenic role of JAM-A in arterial hypertension.

Water adsorbs and desorbs intact on Pd(111), forming a hydrogen-bonded wetting layer whose structure we examine by low energy electron diffraction (LEED) and He atom scattering (HAS). LEED shows that water forms commensurate (√3 × √3)R30° clusters that aggregate into a partially ordered, approximately (7 × 7) superstructure as the layer completes. HAS indicates that the water layer remains disordered on a local (approximately 10 A) scale. Based on workfunction measurements and density functional theory simulations we propose that water forms small, flat domains of a commensurate (√3 × √3)R30° water network, separated by disordered domain boundaries containing largely H-down water. This arrangement allows the water layer to adapt its density and relieve the lateral strain associated with adsorbing water in the optimum flat atop adsorption site. We discuss different possibilities for the structure of these domain walls and compare this strain relief mechanism to the highly ordered, large unit cell structures formed on surfaces such as Pt(111).

The spherical momentum distribution of the protons in ice is extracted from a high resolution deep inelastic neutron scattering experiment. Following a recent path integral Car-Parrinello molecular dynamics study, data were successfully interpreted in terms of an anisotropic Gaussian model, with a statistical accuracy comparable to that of the model independent scheme used previously, but providing more detailed information on the three dimensional potential energy surface experienced by the proton. A recently proposed theoretical concept is also employed to directly calculate the mean force from the experimental neutron Compton profile, and to evaluate the accuracy required to unambiguously resolve and extract the effective proton potential from the experimental data.

Recent studies show that structures based on the traditional ``icelike'' water bilayer are not stable on flat transition metal surfaces and, instead, more complex wetting layers are formed. Here we show that an ordered bilayer can be formed on a SnPt(111) alloy template and determine the structure of the water layer by low energy electron diffraction. Close agreement is found between experiment and the structure calculated by density functional theory. Corrugation of the alloy surface allows only alternate water molecules to chemisorb, stabilizing the H-down water bilayer by reducing the metal-hydrogen repulsion compared to a flat surface.

The performance of solar-thermal conversion systems can be improved by incorporation of nanocarbon-stabilized microencapsulated phase change materials (MPCMs). The geometry of MPCMs in the microcapsules plays an important role for improving their heating efficiency and reliability. Yet few efforts have been made to critically examine the formation mechanism of different geometries and their effect on MPCMs-shell interaction. Herein, through changing the cooling rate of original emulsions, we acquire MPCMs within the nanocarbon microcapsules with a hollow structure of MPCMs (h-MPCMs) or solid PCM core particles (s-MPCMs). X-ray photoelectron spectroscopy and atomic force microscopy reveals that the capsule shell of the h-MPCMs is enriched with nanocarbons and has a greater MPCMs-shell interaction compared to s-MPCMs. This results in the h-MPCMs being more stable and having greater heat diffusivity within and above the phase transition range than the s-MPCMs do. The geometry-dependent heating efficiency and system stability may have important and general implications for the fundamental understanding of microencapsulation and wider breadth of heating generating systems.