Search

Recreational Ecological Parks (REPs) play a pivotal role in advancing sustainable development by promoting ecotourism, conserving biodiversity, and providing inclusive recreational opportunities with minimal environmental impact. Assessing the potential for REP development is crucial to optimize the sustainable use of natural resources and enhance ecological and socio-economic benefits. This study introduces a sustainability-oriented Spatial Multi-Criteria Decision Analysis (SMCDA) framework to evaluate and optimize REP development in Mazandaran Province, Iran. The framework incorporates 33 criteria across five categories: 13 for network connectivity and accessibility; 10 for facilities, services, and tourism potential; 4 for landform and land use; 3 for natural hazards; and 3 for climate conditions. Criteria were standardized using the minimum–maximum method and weighted based on expert input via the Best–Worst Method. A weighted linear combination approach was then applied to generate REP suitability maps. Existing recreational and tourism (R&T) sites were assessed against these maps, and a non-parametric bootstrapping method quantified uncertainties in suitability classifications. The results revealed that approximately 8%, 17%, 26%, 30%, and 19% of the study area fell into very low, low, moderate, high, and very high suitability classes, respectively. Among 151 R&T sites, 33% and 34% were situated in areas classified as very high and high suitability. Prediction rates were most accurate in the very high suitability category, while uncertainty analysis indicated a mean of 13% and a standard deviation of 1.7%, with uncertainties predominantly concentrated in lower suitability classes. The findings underscore the SMCDA framework's efficacy in guiding sustainable REP development by identifying optimal sites and managing uncertainties. This study contributes to sustainability by integrating ecological, economic, and social dimensions into decision-making processes, thereby fostering resilience and long-term environmental stewardship in tourism planning. [ABSTRACT FROM AUTHOR]

Urban micro-climate plays an important role in human activities and in ensuring public health. For instance, the urban heat island effect is crucial to the thermal comfort of citizens and tourists, similar to the urban cool island effect's importance on human and infrastructure resilience. Approximately 35% of global big cities are located in drylands. While existing research has focused on the spatial and temporal changes of surface urban cooling island intensity (SUCII) in drylands in the past, there is a gap in predicting the future spatiotemporal changes in SUCII for cities within these dryland regions. This study aims to forecast the spatiotemporal dynamics of daytime SUCII of representative growing cities with a dry and cold climate. Kerman and Zahedan cities, which are undergoing large urbanization and have harsh hot summer climates, were selected as the study area. Landsat 5 and 8 images and products were utilized for six timestamps within the timeframe of 1986–2023. Various methods, including a random forest algorithm, spectral indices, Cellular Automata-Markov (CA-Markov) model, the cross-tabulation model, and spatial overlay and zonal statistics, were employed to assess and model the spatiotemporal changes in SUCII. Initially, historical land cover maps, land surface temperature (LST), surface biophysical characteristics, and SUCII data were prepared, and their spatiotemporal changes were evaluated. Then, projected maps for these variables for the year 2045 were produced. The results indicated that the built-up areas, bare lands, and green spaces of Kerman (Zahedan) city in 1986 were 26.6 km2 (17.6 km2), 103 km2 (92.5 km2), and 44.4 km2 (5.6 km2), respectively, and these values reached 99.3 km2 (41.9 km2), 61.2 km2 (70.7 km2), and 13.5 km2 (3.2 km2) in 2023. The built-up lands area of Kerman (Zahedan) city is expected to increase by approximately 26% (36%) by 2045, while bare land and green space are expected to decrease by about 32% (20%) and 39% (31%), respectively. The greatest rise in average LST of Kerman (Zahedan) city is associated with the conversion of green spaces to barren land, resulting in a notable increase of 5.5 °C (4.3 °C) in 1986–2023. The conversion of barren land to built-up land in Kerman (Zahedan) city has led to a decrease of 4.6 °C (3.8 °C) in LST. The SUCII of Kerman (Zahedan) city for 1986, 1994, 2001, 2008, 2015, and 2023 were −0.3 °C (0.9 °C), −0.8 °C (0.4 °C), −1.4 °C (−0.5 °C), −1.9 °C (−1.5 °C), −2.6 °C (−2.5 °C), and −3.2 °C (−3.4 °C), respectively. The projected SUCII in Kerman (Zahedan) city for 2045 is about −4.3 °C (−4.5 °C), indicating an increasing trend in SUCII in the future. The area of zones without SUCII in Kerman (Zahedan) city decreased by 44.8 Km2 (54.8 Km2) from 1986 to 2023, while the areas of low, medium, and high SUCII classes increased by 9.1 Km2 (9.9 Km2), 10.9 Km2 (11.9 Km2), and 24.8 Km2 (33.1 Km2), respectively. The area of non-SUCII and high SUCII classes of Kerman (Zahedan) city in 2045 is expected to decrease by 31.5 Km2 (12.0 Km2) and increase by 51.2 Km2 (9.5 Km2) compared with 2023. The findings of this research indicate that the physical growth of cities in drylands can lead to the moderation of LST, contrary to mechanisms in humid and wet regions. [ABSTRACT FROM AUTHOR]

The Tropical Rainfall Measuring Mission (TRMM) and Global Precipitation Mission (GPM) are the most important and widely used data sources in several applications—e.g., forecasting drought and flood, and managing water resources—especially in the areas with sparse or no other robust sources. This study explored the accuracy and precision of satellite data products over a span of 18 years (2000–2017) using synoptic ground station data for three regions in Iran with different climates, namely (a) humid and high rainfall, (b) semi-arid, and (c) arid. The results show that the monthly precipitation products of GPM and TRMM overestimate the rainfall. On average, they overestimated the precipitation amount by 11% in humid, by 50% in semi-arid, and by 43% in arid climate conditions compared to the ground-based data. This study also evaluated the satellite data accuracy in drought and wet conditions based on the standardized precipitation index (SPI) and different seasons. The results showed that the accuracy of satellite data varies significantly under drought, wet, and normal conditions and different timescales, being lowest under drought conditions, especially in arid regions. The highest accuracy was obtained on the 12-month timescale and the lowest on the 3-month timescale. Although the accuracy of the data is dependent on the season, the seasonal effects depend on climatic conditions. [ABSTRACT FROM AUTHOR]

Analysis of land surface temperature (LST) spatiotemporal variations and characterization of the factors affecting these variations are of great importance in various environmental studies and applications. The aim of this study is to propose an integrated model for characterizing LST spatiotemporal variations and for assessing the impact of surface biophysical parameters on the LST variations. For this purpose, a case study was conducted in Babol City, Iran, during the period of 1985 to 2018. We used 122 images of Landsat 5, 7, and 8, and products of water vapor (MOD07) and daily LST (MOD11A1) from the MODIS sensor of the Terra satellite, as well as soil and air temperature and relative humidity data measured at the local meteorological station over 112 dates for the study. First, a single-channel algorithm was applied to estimate LST, while various spectral indices were computed to represent surface biophysical parameters, which included the normalized difference vegetation index (NDVI), soil-adjusted vegetation index (SAVI), normalized difference water index (NDWI), normalized difference built-up index (NDBI), albedo, brightness, greenness, and wetness from tasseled cap transformation. Next, a principal component analysis (PCA) was conducted to determine the degree of LST variation and the surface biophysical parameters in the temporal dimension at the pixel scale based on Landsat imagery. Finally, the relationship between the first component of the PCA of LST and each surface biophysical parameter was investigated by using the ordinary least squares (OLS) regression with both regional and local optimizations. The results indicated that among the surface biophysical parameters, variations of NDBI, wetness, and greenness had the highest impact on the LST variations with a correlation coefficient of 0.75, −0.70, and −0.44, and RMSE of 0.71, 1.03, and 1.06, respectively. The impact of NDBI, wetness, and greenness varied geographically, but their variations accounted for 43%, 38%, and 19% of the LST variation, respectively. Furthermore, the correlation coefficient and RMSE between the observed LST variation and modeled LST variation, based on the most influential biophysical factors (NDBI, wetness, and greenness) yielded 0.85 and 1.06 for the regional approach and 0.93 and 0.26 for the local approach, respectively. The results of this study indicated the use of an integrated PCA–OLS model was effective for modeling of various environmental parameters and their relationship with LST. In addition, the PCA–OLS with the local optimization was found to be more efficient than the one with the regional optimization. [ABSTRACT FROM AUTHOR]

Accurate built-up area extraction is one of the most critical issues in land-cover classification. In previous studies, various techniques have been developed for built-up area extraction using Landsat images. However, the efficiency of these techniques under different technical and geographical conditions, especially for bare and sandy areas, is not optimal. One of the main challenges of built-up area extraction techniques is to determine an optimum and stable threshold with the highest possible accuracy. In many of these techniques, the optimum threshold value fluctuates substantially in different parts of the image scene. The purpose of this study is to provide a new index to improve built-up area extraction with a stable optimum threshold for different environments. In this study, the developed Automated Built-up Extraction Index (ABEI) is presented to improve the classification accuracy in areas containing bare and sandy surfaces. To develop and evaluate the accuracy of the new method for built-up area extraction with Landsat 8 OLI reflective bands, five test sites located in the Iranian cities (Babol, Naqadeh, Kashmar, Bam and Masjed Soleyman), eleven European cities (Athens, Brussels, Bucharest, Budapest, Ciechanow, Hamburg, Lyon, Madrid, Riga, Rome and Porto) and high resolution layer imperviousness (HRLI) data were used. Each site has varying environmental and complex surface coverage conditions. To determine the optimal weights for each of the Landsat 8 OLI reflective bands, the pure pixel sets for different classes and the improved gravitational search algorithm (IGSA) optimization were used. The Kappa coefficient and overall error were calculated to evaluate the accuracy of the built-up extraction map. Additionally, the ABEI performance was compared with the urban index (UI) and normalized difference built-up index (NDBI) performances. In each of the five test sites and eleven cities, the extraction accuracy of the built-up areas using the ABEI was higher than that using the UI, and NDBI (P-value of 0.01). The relative standard deviations of the optimal threshold values for the ABEI and UI were 27 and 155% (at five test sites) and were 16 and 37% (at eleven European cities), respectively, which indicates the stability of the ABEI threshold value when the location and environmental conditions change. The results of this study demonstrated that the ABEI can be used to extract built-up areas from other land covers. This index is effective even in bare soil and sandy areas, where other indices experience major challenges. [ABSTRACT FROM AUTHOR]

Image classification is one of the most common methods of information extraction from satellite images. In this paper, a novel algorithm for image classification based on gravity theory was developed, which was called "homogeneity distance classification algorithm (HDCA)". The proposed HDCA used texture and spectral information for classifying images in two iterative supplementary computing stages: (1) merging, (2) traveling and escaping operators. The HDCA was equipped by a new concept of distance, the weighted Manhattan distance (WMD). Moreover, an improved gravitational search algorithm (IGSA) was applied for selecting features and determining optimal feature space scale in HDCA. In the case of multispectral satellite image classification, the proposed method was compared with two well-known classification methods, Maximum Likelihood classifier (MLC) and Support Vector Machine (SVM). The results of the comparison indicated that overall accuracy values for HDCA, MLC, and SVM are 95.99, 93.15, and 95.00, respectively. Furthermore, the proposed HDCA method was also used for classifying hyperspectral reference datasets (Indian Pines, Salinas and Salinas-A scene). The classification results indicated substantial improvement over previous algorithms and studies by 2% in Indian Pines dataset, 0.7% in the Salinas dataset and 1.2% in the Salinas-A scene. These experimental results demonstrate that the proposed algorithm can classify both multispectral and hyperspectral remote sensing images with reliable accuracy because this algorithm uses the WMD in the classification process and the IGSA to select automatically optimal features for image classification based on spectral and texture information. [ABSTRACT FROM AUTHOR]