Search

Food contamination caused by foodborne pathogens is one of the most important concerns in public health worldwide, and accounts for a significant portion of food loss every year. The emergence of antimicrobial resistant bacteria has turned the attention of researchers back to the potential of bacteriophages as antibacterial agents, and their use has been attempted in various pre-and post-harvest food production settings. The application of phage-based antibacterial products has achieved considerable success but a number of technical, environmental and administrative challenges remain unaddressed. In this review, we summarize the current status of bacteriophage application in the food industry. We discuss the obstacles facing the further development of phage-based antibacterial products from the aspects of technology, environmental safety, and administrative policy. We also advance some possible solutions to these challenges. © 2021 Society of Chemical Industry., (© 2021 Society of Chemical Industry.)

Processing environment monitoring is gaining increasing importance in the context of food safety management plans/HACCP programs, since past outbreaks have shown the relevance of the environment as contamination pathway, therefore requiring to ensure the safety of products. However, there are still many open questions and a lack of clarity on how to set up a meaningful program, which would provide early warnings of potential product contamination. Therefore, the current paper aims to summarize and evaluate existing scientific information on outbreaks, relevant pathogens in low moisture foods, and knowledge on indicators, including their contribution to a "clean" environment capable of limiting the spread of pathogens in dry production environments. This paper also outlines the essential elements of a processing environment monitoring program thereby supporting the design and implementation of better programs focusing on the relevant microorganisms. This guidance document is intended to help industry and regulators focus and set up targeted processing environment monitoring programs depending on their purpose, and therefore provide the essential elements needed to improve food safety., (Copyright © 2021 The Authors. Published by Elsevier B.V. All rights reserved.)

The coronavirus disease (COVID-19) pandemic has severely impacted the meat processing industry in the United States. We sought to detail demographics and outcomes of severe acute respiratory syndrome coronavirus 2 infections among workers in Nebraska meat processing facilities and determine the effects of initiating universal mask policies and installing physical barriers at 13 meat processing facilities. During April 1-July 31, 2020, COVID-19 was diagnosed in 5,002 Nebraska meat processing workers (attack rate 19%). After initiating both universal masking and physical barrier interventions, 8/13 facilities showed a statistically significant reduction in COVID-19 incidence in <10 days. Characteristics and incidence of confirmed cases aligned with many nationwide trends becoming apparent during this pandemic: specifically, high attack rates among meat processing industry workers, disproportionately high risk of adverse outcomes among ethnic and racial minority groups and men, and effectiveness of using multiple prevention and control interventions to reduce disease transmission.

In this era of green technology, plasma technology is one of the novel techniques intended towards many industries including food industry as a principal application due to less utilization of energy, solvents, and water with minimum impact on food quality. The foremost purpose behind the utilization of nonthermal plasma processing (cold plasma) lies in the retention of freshness of food products along with furtherance of sensory properties as well as functional and nutritional composition. In addition, this technique assists in shelf life extension and carries out desirable modifications in the structure of food and packaging material. This technology has been proven to be advantageous over other technologies since all these processes are carried out at low temperature, hence is highly suitable for heat-sensitive materials. The present review summarizes the mechanism of this plasma technology along with its benefits to the industry, for example improvements in cooking quality, enhancements in enzyme activity, modification of starches, and microbial inactivation. Also, the effects of plasma treatment on characteristics of various food products have been elaborated in this review.

Fish and seafood consumption in Australia has been growing, yet the implications of this trend across the food system, from both a health and sustainability perspective have not been fully explored. This paper aims to map out the fish and seafood food system in Australia, linking production and consumption, to articulate challenges and opportunities for enhancing the sector's contribution to future healthy and sustainable diets. We conducted a secondary analysis of publicly available datasets on fish and seafood production and consumption, triangulated and supplemented with peer-reviewed and grey literature on environmental, economic and social sustainability issues throughout the food system. A key challenge for health is the high proportion of fish and seafood consumed as discretionary food, particularly among children. Key challenges for sustainability include the narrow focus on environmental sustainability (with little consideration of the other domains), and the focus on production with little consideration for sustainability throughout post-harvest handling, processing, retail, distribution and consumption. Key opportunities for health and sustainability include the innovative use of processing and packaging technology to maximise nutritional quality; creation of markets and supply chains for a greater diversity of underutilised fish and seafood species and processing by-products; and reductions in waste and loss throughout the entire supply chain.

Innovative food processing technologies have been widely investigated in food processing research in recent years. These technologies offer key advantages for advancing the preservation and quality of conventional foods, for combatting the growing challenges posed by globalization, increased competitive pressures and diverse consumer demands. However, there is a need to increase the level of adoption of novel technologies to ensure the potential benefits of these technologies are exploited more by the food industry. This review outlines emerging thermal and non-thermal food processing technologies with regard to their mechanisms, applications and commercial aspects. The level of adoption of novel food processing technologies by the food industry is outlined and the factors that impact their industrial adoption are discussed. At an industry level, the technological capabilities of individual companies, their size, market share as well as their absorptive capacity impact adoption of a novel technology. Characteristics of the technology itself such as costs involved in its development and commercialization, associated risks and relative advantage, and level of complexity and compatibility influence the technology's adoption. The review concludes that a deep understanding of the development and application of a technology along with the factors influencing its acceptance are critical to ensure its commercial adoption.

Plant byproducts of food processing industry line are undervalued yet important resource. These byproducts contain large percentage of high value functional substances such as antioxidants, pectin, polyphenols and so on. Recently, many research studies concentrated on innovative technologies that promise to overcome such issues as time consuming, inefficiency, and low yield, among others, which exist in most conventional techniques. Consequently, to achieve the recovery of nutraceuticals from high added-value by-products, it is necessary to have more knowledge of these novel technologies and more importantly explore the possibility of application of these latest technologies to the recovery downstream processing. The present work will summarize state-of-the-art technological approaches concerning extraction, superfine and drying applied to plant food processing residues. Simultaneously, the application of the bioactive components originated from byproducts in food industry will also be reviewed.

Non-thermal plasma (NTP) is one of the most promising minimal processing methods for the food industry. However up until recently there are limited studies which would report the application and effect of NTP on processed seafood. The objective of this review is to highlight the recent findings and advancements in the application of NTP within the fish and other seafood industry, including direct application of fresh and dried fish and seafood with as well as indirect application of plasma activated water and seafood industry wastewater purification. The article also summarizes the effect of plasma treatment on microbiological quality, physicochemical and sensory properties and oxidation rate of treated fish and seafood. NTP has high potential to be used within various fields of seafood industry. It is especially effective in treatment of dried seafood products, but the use of plasma activated water during various processing steps such as seafood washing could be also beneficial. Moreover NTP could also be used as a cost effective and environmentally friendly method for seafood wastewater purification.

Every individual needs food for its nutritional value and flavor while the economic growth of a nation depends on a thriving profit-generating industry. The food industry caters to both needs in an efficient manner. Proteins can rightly be considered as the driving force behind the overwhelming success of this industry. However, purification of proteins is not an easy undertaking due to their intricate nature while presently employed procedures for this purpose, regrettably, are both costly, and labor- and time-intensive in addition to being unsettling on proteins structural conformity. ATPS has accumulated a lot of interest from the scientific community due to its mild operating conditions, high recovery yield, ease of scaling it up, and its cost-effective and environment friendly nature. This review tries to amass some accounts concerning the utility of ATPS for the separation and purification of proteins. Some auspicious clues in this regard can be witnessed along with a few loopholes which need to be addressed before this technique can truly demonstrate its potential vis-à-vis industrial protein purification. Overall, a polymer - salt (citrates in particular) ATPS with an added inert supplementary salt can be regarded as a better option for purifying proteins.

Many advances have occurred in the field of smart meat packaging, and the potential for these to be used as tools that respond to challenges faced by industry is exciting. Here, we review packaging solutions to several immediate concerns, encompassing dark cutting, purge and yield losses, product traceability and provenance, packaging durability, microbial spoilage and safety, colour stability, environmental impacts, and the preservation of eating quality. Different active and intelligent packaging approaches to each of these were identified and are discussed in terms of their usefulness - to processors, retailers and/or consumers. From this, it became apparent that prior to selecting a packaging solution, industry should first define their criteria for success (e.g. How much purge is too much? What is a reasonable shelf-life to facilitate product turnover? Is the customer willing to pay for this?), and understand that packaging is not the sole solution, but acts as part of a holistic response to these issues., (Crown Copyright © 2018. Published by Elsevier Ltd. All rights reserved.)

In February 2014 a new law was approved by the Israeli parliament, namely the Control of Animal Feed Law. The law intends to regulate the production and marketing of animal feed. In preparation for the law's implementation in 2017, we have assessed the current feed and food safety challenges in Israel in recent years in association with the presence of common undesirable contaminants in various common feed and food commodities. Tight collaboration between regulatory authorities and feed/food industry, enhanced feed and food quality monitoring, transparency of survey results and readily accessible and reliable information for the public about health hazards of chemical contaminants, will guarantee the safety and quality of food and feed.

Objective: To assess progress towards the elimination of trans-fatty acids (TFA) in foods after the 2008 Pan American Health Organization (PAHO) recommendation of virtual elimination of TFA in Latin America., Design: A descriptive, comparative analysis of foods that were likely to contain TFA and were commonly consumed in four cities in Latin America., Setting: San José (Costa Rica), Mexico City (Mexico), Rio de Janeiro (Brazil), Buenos Aires (Argentina)., Subjects: Foods from each city were sampled in 2011; TFA content was analysed using GC. TFA of selected foods was also monitored in 2016., Results: In 2011-2016, there was a significant decrease in the content of TFA in the sampled foods across all sites, particularly in Buenos Aires (from 12·6-34·8 % range in 2011-2012 to nearly 0 % in 2015-2016). All sample products met the recommended levels of TFA content set by the PAHO. TFA were replaced with a mixture of saturated and unsaturated fats., Conclusions: Our results indicate a virtual elimination of TFA from major food sources in the cities studied. This could be due to a combination of factors, including recommendations by national and global public health authorities, voluntary and/or mandatory food reformulation made by the food industry.

Nutrient profiling (NP) models rate the nutritional quality of individual foods, based on their nutrient composition. Their goal is to identify nutrient-rich foods, generally defined as those that contain more nutrients than calories and are low in fat, sugar and salt. NP models have provided the scientific basis for evaluating nutrition and health claims and regulating marketing and advertising to children. The food industry has used NP methods to reformulate product portfolios. To help define what we mean by healthy foods, NP models need to be based on published nutrition standards, mandated serving sizes and open-source nutrient composition databases. Specifically, the development and testing of NP models for public health should follow the seven decision steps outlined by the European Food Safety Authority. Consistent with this scheme, the nutrient-rich food (NRF) family of indices was based on a variable number of qualifying nutrients (from six to fifteen) and on three disqualifying nutrients (saturated fat, added sugar, sodium). The selection of nutrients and daily reference amounts followed nutrient standards for the USA. The base of calculation was 418·4 kJ (100 kcal), in preference to 100 g, or serving sizes. The NRF algorithms, based on unweighted sums of percent daily values, subtracted negative (LIM) from positive (NRn) subscores (NRn - LIM). NRF model performance was tested with respect to energy density and independent measures of a healthy diet. Whereas past uses of NP modelling have been regulatory or educational, voluntary product reformulation by the food industry may have most impact on public health.

The food industry holds great potential for driving consumers to adopt healthy food choices as (re)formulation of foods can improve the nutritional quality of these foods. Reformulation has been identified as a cost-effective intervention in addressing non-communicable diseases as it does not require significant alterations of consumer behaviour and dietary habits. Nutrient profiling (NP), the science of categorizing foods based on their nutrient composition, has emerged as an essential tool and is implemented through many different profiling systems to guide reformulation and other nutrition policies. NP systems should be adapted to their specific purposes as it is not possible to design one system that can equally address all policies and purposes, e.g. reformulation and labelling. The present paper discusses some of the key principles and specificities that underlie a NP system designed for reformulation with the example of the Nestlé nutritional profiling system. Furthermore, the impact of reformulation at the level of the food product, dietary intakes and public health are reviewed. Several studies showed that food and beverage reformulation, guided by a NP system, may be effective in improving population nutritional intakes and thereby its health status. In order to achieve its maximum potential and modify the food environment in a beneficial manner, reformulation should be implemented by the entire food sector. Multi-stakeholder partnerships including governments, food industry, retailers and consumer associations that will state concrete time-bound objectives accompanied by an independent monitoring system are the potential solution.

In this paper, I first provide definitions of nutrient profiling and of a nutrient profile model. I set out the purposes of nutrient profiling: both general and specific. I give two examples of nutrient profile models that have been developed for regulatory purposes by the Food Standards Agency (FSA) in the UK and the WHO for its European Region - the UK FSA/Ofcom and the WHO-Euro models - and compare the way the models are constructed and function, how they have been developed, the extent to which they have been tested and validated and their use in regulation. Finally I draw some conclusions about the future use of nutrient profiling for regulatory purposes. I argue that its full potential has yet to be realised and give some reasons why. I pose some urgent research questions with respect to nutrient profiling.

The primary goal of front of pack (FOP) labelling is to help consumers make healthier choices through communication. A secondary goal is to encourage producers to improve the nutritional composition of their products. Evidence has shown that (FOP) labelling can help consumers to make healthier food choices and has been an incentive for producers to improve product composition. As FOP labelling is seen as an important tool to improve food environments for public health purposes, the WHO supports initiatives of governments to implement an FOP labelling system. Based on the experiences of a wide range of countries over many years, possible success factors for such an FOP system have been defined, six of which are discussed in the present paper and used to evaluate the Dutch Choices Programme that was started in 2006. In the course of time a large number of producers joined the programme and the logo was recognised by more than 90 % of the consumers, but by 2016 the Dutch consumer organisation argued on the basis of their own research that a quarter of the consumers did not understand the colour coding of the logo and as a result the Dutch government decided to no longer support this logo and to introduce a nutrition app. The challenge that remains is to find a system that consumers understand well and that still encourages manufacturers of food to improve product composition. New technology-based data collecting initiatives might provide the right tools to develop such a system.

Nutrient profiling aims to classify or rank foods according to their nutritional composition to assist policies aimed at improving the nutritional quality of foods and diets. The present paper reviews a French approach of nutrient profiling by describing the SAIN,LIM system and its evolution from its early draft to the simplified nutrition labelling system (SENS) algorithm. Considered in 2010 by WHO as the 'French model' of nutrient profiling, SAIN,LIM classifies foods into four classes based on two scores: a nutrient density score (NDS) called SAIN and a score of nutrients to limit called LIM, and one threshold on each score. The system was first developed by the French Food Standard Agency in 2008 in response to the European regulation on nutrition and health claims (European Commission (EC) 1924/2006) to determine foods that may be eligible for bearing claims. Recently, the European regulation (EC 1169/2011) on the provision of food information to consumers allowed simplified nutrition labelling to facilitate consumer information and help them make fully informed choices. In that context, the SAIN,LIM was adapted to obtain the SENS algorithm, a system able to rank foods for simplified nutrition labelling. The implementation of the algorithm followed a step-by-step, systematic, transparent and logical process where shortcomings of the SAIN,LIM were addressed by integrating specificities of food categories in the SENS, reducing the number of nutrients, ordering the four classes and introducing European reference intakes. Through the French example, this review shows how an existing nutrient profiling system can be specifically adapted to support public health nutrition policies.

Assessment of sustainability will become more relevant for the food industry in the years to come. Analysis based on exergy, including the use of exergetic indicators and Grassmann diagrams, is a useful tool for the quantitative and qualitative assessment of the efficiency of industrial food chains. In this paper, we review the methodology of exergy analysis and the exergetic indicators that are most appropriate for use in the food industry. The challenges of applying exergy analysis in industrial food chains and the specific features of food processes are also discussed.

In the food industry the subject of food losses is of great importance due to economic balance and an efficient application of resources as well as the development of an efficient food chain system. This paper presents the explorative results of a quantitative survey of leading companies of the German food industry to evaluate the relevance and handling of this issue. The investigation reveals that the topic food losses have a high significance in the food industry which will probably increase in future. A sample breakdown by branches indicates that the issue has the highest relevance for companies in the confectionery industry. These companies as well as those in the meat and fish industry want to consider the subject prospectively more powerful in their companies. Across the food industry, there is no communication to consumers of the efforts concerning food losses. And companies in the confectionery industry and in the fruit and vegetable industry rather want to engage more powerful in this topic if consumers' interest increases. But in order to minimize food losses at all stages along the supply chain, communication and collaboration at all stages is essential, especially the communication to consumers. Thus, it has to be verified whether a suitable communication can lead to advantages in competition and become an important issue for companies to differentiate from competitors., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Infant food and weaning practices are highly debated with lots of unanswered questions. It is becoming more apparent that early-life feeding may have an effect on the long-term health of humans, particularly for noncommunicable diseases such as obesity and allergic diseases. It is important to understand how environmental influences in early life can affect the development of the immune system and metabolic profiling. In terms of nutrition and diet, one should consider the role of the total/whole diet, as well as particular nutrients in the development of noncommunicable diseases. Providing the appropriate nutrition for infants during the weaning age needs to address factors such as the microbial load of the food, nutrient composition, presence/absence of allergens and appropriate textures. These factors are of importance irrespective of whether the food is homemade or produced commercially, and need to take environmental factors and food resources into account., (© 2016 Nestec Ltd., Vevey/S. Karger AG, Basel.)

With consumer concerns increasing over food quality and safety, the food industry has begun to pay much more attention to the development of rapid and reliable food-evaluation systems over the years. As a result, there is a great need for manufacturers and retailers to operate effective real-time assessments for food quality and safety during food production and processing. Computer vision, comprising a nondestructive assessment approach, has the aptitude to estimate the characteristics of food products with its advantages of fast speed, ease of use, and minimal sample preparation. Specifically, computer vision systems are feasible for classifying food products into specific grades, detecting defects, and estimating properties such as color, shape, size, surface defects, and contamination. Therefore, in order to track the latest research developments of this technology in the agri-food industry, this review aims to present the fundamentals and instrumentation of computer vision systems with details of applications in quality assessment of agri-food products from 2007 to 2013 and also discuss its future trends in combination with spectroscopy.

Objective: Long-chain n-3 fatty acid intake in Colombia is low because fish consumption is limited. Vegetable oils with high n-3 fatty acid content are recommended, but their concentrations of trans fats were high in previous studies. Thus, regular monitoring of the fatty acid composition of vegetable oils is required. Our objective was to quantify the fatty acid composition in commercially available oils in Bogota, Colombia and determine if composition changed from 2008 to 2013., Design: Cross-sectional study. We obtained samples of all commercially available oils reported in a survey of low- and middle-income families with a child participating in the Bogota School Children Cohort., Setting: Bogota, Colombia., Subjects: Not applicable., Results: Sunflower oil had the highest trans-fatty acid content (2.18%). Canola oil had the lowest proportion of trans-fatty acids (0.40%) and the highest n-3 fatty acid content (9.37%). In terms of percentage reduction from 2008 to 2013 in 18:1 and 18:2 trans-fatty acids, canola oil had 89% and 65% reduction, mixed oils had 44% and 48% reduction, and sunflower oil had 25% and 51 % reduction, respectively. Soyabean oil became widely available in 2013., Conclusions: The content of trans-fatty acids decreased in all oils from 2008 to 2013, suggesting a voluntary reduction by industry. We believe that regular monitoring of the fatty acid composition of oils is warranted.

Opportunities exist for micronutrient fortification of condiments and seasonings to combat vitamin or mineral deficiencies. This paper reviews the available technologies for industrial processing of condiments and seasonings and their fortification with micronutrients. The industrial processes to manufacture commonly consumed condiments and seasonings, such as soy sauce, bouillon cubes, fish sauce, spices, and other relevant products, are described. The impact of processing on fortification is evaluated, considering both the type of vehicle and the fortificant used. The analyzed technologies represent effective strategies for mineral fortification, particularly with iodine and iron. However, fortification with vitamins has been more challenging, owing to sensory changes of the finished product and a poor stability of the fortificant when using certain vehicles. Therefore, more studies are needed in this area in collaboration with governments, the food industry, and vitamin suppliers. Despite the technical difficulties encountered, the current processing technologies for the production of condiments and seasonings can be adapted and refined to allow their successful fortification with micronutrients., (© 2015 New York Academy of Sciences.)

In the last decade the development of gluten-free foodstuffs has attracted great attention as a result of better diagnoses of coeliac disease and a greater knowledge of the relationship between gluten-free products and health. The increasing interest has prompted extensive research into the development of gluten-free foodstuffs that resemble gluten-containing foods. This review aims to provide some insights on dough functionality and process conditions regarding bread quality and to point out recent research dealing with the nutritional composition of those products. Gluten-free dough results from the combination of different ingredients, additives, and the processing aids required for building up network structures responsible for bread quality. Some relationships between dough rheology and bread characteristics were established to identify possible predictor parameters. Regarding bread-making processes, the impact of mixing, dough treatment and baking is stated. Nutritional quality is an important asset when developing gluten-free breads, and different strategies for improving it are reviewed. Gluten-free bread quality is dependent on ingredients and additives combination, but also processing can provide a way to improve bread quality. Nutritive value of the gluten-free breads must be always in mind when setting up recipes, for obtaining nutritionally balanced bread with adequate glycaemic index., (© 2014 Society of Chemical Industry.)

The E number system for food additives was introduced in the 1960s and the E was intended to reassure consumers that permitted additives were safe. In the 1980s full ingredient declarations had to be provided on food products for the first time and manufacturers were permitted to use either the name or the number of the additive on the ingredient list. This paper outlines some of the trends in the sourcing, use and labelling of additives since the introduction of full ingredient listing. Generally, sourcing has become more global with a large number of suppliers being based in China. From an initial use of E numbers in ingredient lists, manufacturers are increasingly using the names of additives. This trend is being extended to avoid the use of anything the consumer might consider an additive, particularly in connection with colours and preservatives. Specifically, the colours used in the Southampton study on the impact of food colours on hyperactivity in children have largely been replaced by colouring foodstuffs, and the preservative used in the study, sodium benzoate, has been replaced by potassium sorbate in the majority of soft drinks., (© 2014 Society of Chemical Industry.)

The rates of foodborne disease caused by gastrointestinal pathogens continue to be a concern in both the developed and developing worlds. The growing world population, the increasing complexity of agri-food networks and the wide range of foods now associated with STEC are potential drivers for increased risk of human disease. It is vital that new developments in technology, such as whole genome sequencing (WGS), are effectively utilized to help address the issues associated with these pathogenic microorganisms. This position paper, arising from an OECD funded workshop, provides a brief overview of next generation sequencing technologies and software. It then uses the agent-host-environment paradigm as a basis to investigate the potential benefits and pitfalls of WGS in the examination of (1) the evolution and virulence of STEC, (2) epidemiology from bedside diagnostics to investigations of outbreaks and sporadic cases and (3) food protection from routine analysis of foodstuffs to global food networks. A number of key recommendations are made that include: validation and standardization of acquisition, processing and storage of sequence data including the development of an open access "WGSNET"; building up of sequence databases from both prospective and retrospective isolates; development of a suite of open-access software specific for STEC accessible to non-bioinformaticians that promotes understanding of both the computational and biological aspects of the problems at hand; prioritization of research funding to both produce and integrate genotypic and phenotypic information suitable for risk assessment; training to develop a supply of individuals working in bioinformatics/software development; training for clinicians, epidemiologists, the food industry and other stakeholders to ensure uptake of the technology and finally review of progress of implementation of WGS. Currently the benefits of WGS are being slowly teased out by academic, government, and industry or private sector researchers around the world. The next phase will require a coordinated international approach to ensure that it's potential to contribute to the challenge of STEC disease can be realized in a cost effective and timely manner., (Copyright © 2014. Published by Elsevier B.V.)

Computer vision-based image analysis has been widely used in food industry to monitor food quality. It allows low-cost and non-contact measurements of colour to be performed. In this paper, two computer vision-based image analysis approaches are discussed to extract mean colour or featured colour information from the digital images of foods. These types of information may be of particular importance as colour indicates certain chemical changes or physical properties in foods. As exemplified here, the mean CIE a* value or browning ratio determined by means of computer vision-based image analysis algorithms can be correlated with acrylamide content of potato chips or cookies. Or, porosity index as an important physical property of breadcrumb can be calculated easily. In this respect, computer vision-based image analysis provides a useful tool for automatic inspection of food products in a manufacturing line, and it can be actively involved in the decision-making process where rapid quality/safety evaluation is needed., (© 2013 Society of Chemical Industry.)

The frequent media reports on food additives weakened consumers' trust in food producers and food control authorities as well. Furthermore, consumers' uncertainty is also raised by the fact that they obtain their information from inadequate, mistrustful sources and, therefore, consumers might avoid the consumption of certain foodstuffs. While food producers may react by replacing artificial components by natural ones, they try to emphasize the favourable characteristics of their products. The authors describe the main trends and efforts related to food additives. On the basis of the overview it can be concluded that - besides taking into consideration consumers' needs - product development and research directions are promising. Food producers' efforts may help to restore consumer confidence and trust and they may help them to have informed choice.

Objective: In 2006 the UK Food Standards Agency (FSA) introduced voluntary sodium reduction targets for more than 80 categories of processed food. Our aim was to determine the impact of these targets on the sodium content of processed foods in the UK between 2006 and 2011., Method: Household consumer panel data (n>18,000 households) were used to calculate crude and sales-weighted mean sodium content for 47,337 products in 2006 and 49,714 products in 2011. Two sample t-tests were used to compare means. A secondary analysis was undertaken to explore reformulation efforts and included only products available for sale in both 2006 and 2011., Results: Between 2006 and 2011 there was an overall mean reduction in crude sodium content of UK foods of -26 mg/100g (p ≤ 0.001), equivalent to a 7% fall (356 mg/100g to 330 mg/100g). The corresponding sales-weighted reduction was -21 mg/100g (-6%). For products available for sale in both years the corresponding reduction was -23 mg/100g (p<0.001) or -7%., Conclusion: The UK FSA voluntary targets delivered a moderate reduction in the mean sodium content of UK processed foods between 2006 and 2011. Whilst encouraging, regular monitoring and review of the UK sodium reduction strategy will be essential to ensure continued progress., (© 2013.)

By-products generated every year by the European fruit and cereal processing industry currently exceed several million tons. They are disposed of mainly through landfills and thus are largely unexploited sources of several valuable biobased compounds potentially profitable in the formulation of novel food products. The opportunity to design novel strategies to turn them into added value products and food ingredients via novel and sustainable processes is the main target of recently EC-funded FP7 project NAMASTE-EU. NAMASTE-EU aims at developing new laboratory-scale protocols and processes for the exploitation of citrus processing by-products and wheat bran surpluses via the production of ingredients useful for the formulation of new beverage and food products. Among the main results achieved in the first two years of the project, there are the development and assessment of procedures for the selection, stabilization and the physical/biological treatment of citrus and wheat processing by-products, the obtainment and recovery of some bioactive molecules and ingredients and the development of procedures for assessing the quality of the obtained ingredients and for their exploitation in the preparation of new food products., (Copyright © 2013 Elsevier B.V. All rights reserved.)

The understanding that enzymatic degradation of fruit pectin can clarify juices and improve juice yields resulted in the search for microbial pectinases and application in vegetable- and fruit-processing industries. Identified enzymes were classified on the basis of their catalytic activity to pectin or its derivatives and in terms of industrial use. Discovery of gene sequences that coded the enzymes, protein engineering, and molecular biology tools resulted in defined microbial strains that over-produced the enzymes for cost-effective technologies. Recent perspectives on the use of pectin and its derivatives as dietary fibers suggest enzymatic synthesis of the right oligomers from pectin for use in human nutrition. While summarizing the activities of pectin-degrading enzymes, their industrial applications, and gene sources, this review projects another application for pectinases, which is the use of enzymatically derived pectin moieties in functional food preparation.

A dataset of manufacturers' measurements of acrylamide levels in 40,455 samples of fresh sliced potato crisps from 20 European countries for years 2002 to 2011 was compiled. This dataset is by far the largest ever compiled relating to acrylamide levels in potato crisps. Analysis of variance was applied to the data and showed a clear, significant downward trend for mean levels of acrylamide, from 763 ± 91.1 ng g⁻¹ (parts per billion) in 2002 to 358 ± 2.5 ng g⁻¹ in 2011; this was a decrease of 53% ± 13.5%. The yearly 95th quantile values were also subject to a clear downward trend. The effect of seasonality arising from the influence of potato storage on acrylamide levels was evident, with acrylamide in the first 6 months of the year being significantly higher than in the second 6 months. The proportion of samples containing acrylamide at a level above the indicative value of 1000 ng g⁻¹ for potato crisps introduced by the European Commission in 2011 fell from 23.8% in 2002 to 3.2% in 2011. Nevertheless, even in 2011, a small proportion of samples still contained high levels of acrylamide, with 0.2% exceeding 2000 ng g⁻¹.

This chapter presents recent advances in bacteriophage research and their application in the area of food safety. Section 1 describes general facts on phage biology that are relevant to their application for control and detection of bacterial pathogens in food and environmental samples. Section 2 summarizes the recently acquired data on application of bacteriophages to control growth of bacterial pathogens and spoilage organisms in food and food-processing environment. Section 3 deals with application of bacteriophages for detection and identification of bacterial pathogens. Advantages of bacteriophage-based methods are presented and their shortcomings are discussed. The chapter is intended for food scientist and food product developers, and people in food inspection and health agencies with the ultimate goal to attract their attention to the new developing technology that has a tremendous potential in providing means for producing wholesome and safe food., (Copyright © 2012 Elsevier Inc. All rights reserved.)

Sparkling wines contain at least three CO₂ pressure bars at 20°C. Carbonic gas is required to have an endogenous origin, obtained via a second fermentation, in the following European categories: sparkling wines and quality sparkling wines. In these types of sparkling wines, high gas pressure, together with other wine components, enables them to produce effervescence and foam when poured into the glass. The most commonly used grape varieties are Chardonnay and Pinot. Elaboration consists of two phases. In the first phase, the base wine is obtained after applying white vinification. The second phase consists of refermenting the wine, either in the bottle (champenoise or traditional method) or in isobaric tanks (Charmat method). The second fermentation requires the addition of "liqueur de tirage" to the base wine. The sparkling wines have a special biological aging or aging sur lies. As sparkling wines remain in contact with the lees, they develop sensory notes such as toasty, lactic, sweet, and yeasty, which can be attributed to proteolytic processes, components that would serve as the substrate for chemical and enzymatic reactions and to causes related with release-absorption between cell walls and the wine., (Copyright © 2012 Elsevier Inc. All rights reserved.)

The cow and its milk have been held sacred in the world since the dawn of human civilization. Indian ancient Vedic texts describe the virtues of milk and dairy products, as is authenticated by modern scientific principles and proofs. Therefore, milk has been considered as one of the most natural and highly nutritive part of a daily balanced diet. Currently, the integration of advanced scientific knowledge with traditional information is gaining incredible momentum toward developing the concept of potential therapeutic foods. Furthermore, new advances toward understanding the therapeutic roles of milk and milk products have also given a new impetus for unraveling the age old secrets of milk. At present, the best-known examples of therapeutic foods are fermented milk products containing health promoting probiotic bacteria. In the present article, we have tried to review the various aspects of the therapeutic nature of milk and fermented dairy products in a highly up-dated manner, and offer an in-depth insight into the development of targeted therapeutic future foods as per the requirements of consumers.

Nanoscience is the study of phenomena and the manipulation of materials at the atomic or molecular level. Nanotechnology involves the design, production and use of structures through control of the size and shape of the materials at the nanometre scale. Nanotechnology in the food sector is an emerging area with considerable research and potential products. There is particular interest in the definition and regulation of engineered nanomaterials. This term covers three classes of nanomaterials: natural and processed nanostructures in foods; particulate nanomaterials metabolized or excreted on digestion; and particulate nanomaterials not broken down on digestion, which accumulate in the body. This review describes examples of these classes and their likely status in the food industry., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

Nanotechnology and nanomaterials have tremendous potential to enhance the food supply through novel applications, including nutrient and bioactive absorption and delivery systems; ingredient functionality; improved colors and flavors; microbial, allergen, and contaminant detection and control; and food packaging properties and performance. To determine the current state of knowledge regarding the safety of these potential uses of nanomaterials, an appraisal of the published literature on the safety of food-related nanomaterials was undertaken. A method of assessment of reliability of toxicology studies was developed to conduct this appraisal. The review of the toxicology literature on oral exposure to food-related nanomaterials found that the number of studies is limited. Exposure to nanomaterials in the human food chain may occur not only through intentional uses in food manufacturing, but also via uses in agricultural production and carry over from use in other industries. Although a number of analytical methods are useful in physicochemical characterization of manufactured nanomaterials, new methods may be needed to more fully detect and characterize nanomaterials incorporated into foods and in other media. There is a need for additional toxicology studies of sufficient quality and duration on different types of nanomaterials to further our understanding of the characteristics of nanomaterials that affect safety of oral exposure resulting from use in various food applications., (© 2011 Institute of Food Technologists®)

The emergence of egg allergy has had both industrial and clinical implications. In industrialized countries, egg allergy accounts for one of the most prevalent food hypersensitivities, especially in children. Atopic dermatitis represents the most common clinical manifestation in infancy; however, the range of clinical signs is broad and encompasses life-threatening anaphylaxis. The dominant egg allergens are proteins and are mainly present in the egg white, for example, ovalbumin, ovomucoid, ovotransferrin, and lysozyme. However, egg yolk also displays low-level allergenicity, for example, alpha-livetin. Strict avoidance of the offending food remains the most common recommendation for egg-allergic individuals. Nevertheless, the omnipresence of egg-derived components in prepackaged or prepared foods makes it difficult. Therefore, more efficient preventive approaches are investigated to protect consumers from inadvertent exposure and ensuing adverse reactions. On the one hand, commercial kits have become readily available that allow for the detection of egg contaminants at trace levels. On the other hand, attempts to produce hypoallergenic egg-containing products through food-processing techniques have met with promising results, but the approach is limited due to its potentially undesirable effects on the unique functional and sensory attributes of egg proteins. Therefore, the development of preventive or curative strategies for egg allergy remains strongly warranted. Pilot studies have suggested that oral immunotherapy (IT) with raw or cooked preparations of egg may represent a safe alternative, immediately available to allergic subjects, but remains applicable to only nonanaphylactic patients. Due to the limitations of conventional IT, novel forms of immunotherapy are sought based on information obtained from the molecular characterization of major egg allergens. In the past decade, promising approaches to the treatment and prevention of egg allergy have been explored and include, among others, the production of hypoallergenic recombinant egg proteins, the development of customized peptides, and bacterial-mediated immunotherapy. Nonspecific approaches have also been evaluated, and preliminary trials with the use of probiotic bacteria have yielded encouraging results. The current understanding of egg allergens offers novel approaches toward the making of food products safe for human consumption and the development of efficient immunotherapeutic strategies.

The growth of horticulture industries worldwide has generated huge quantities of fruit wastes (25%-40% of the total fruits processed). These residues are generally a good source of carbohydrates, especially cell wall polysaccharides and other functionally important bioactive molecules such as proteins, vitamins, minerals and natural antioxidants. "Apple pomace" is a left-over solid biomass with a high moisture content, obtained as a by-product during the processing of apple fruits for juice, cider or wine preparation. Owing to the high carbohydrate content, apple pomace is used as a substrate in a number of microbial processes for the production of organic acids, enzymes, single cell protein, ethanol, low alcoholic drinks and pigments. Recent research trends reveal that there is an increase in the utilization of apple pomace as a food processing residue for the extraction of value added products such as dietary fibre, protein, natural antioxidants, biopolymers, pigments and compounds with unique properties. However, the central dogma is still the stability, safety and economic feasibility of the process(s)/product(s) developed. This review is mainly focused on assessing recent research developments in extraction, isolation and characterization of bioactive molecules from apple pomace, along with their commercial utilization, in food fortification.

The marine world represents a largely untapped reservoir of bioactive ingredients that can be applied to numerous aspects of food processing, storage, and fortification. Due to the wide range of environments they survive in, marine organisms have developed unique properties and bioactive compounds that, in some cases, are unparalleled by their terrestrial counterparts. Enzymes extracted from fish and marine microorganisms can provide numerous advantages over traditional enzymes used in food processing due to their ability to function at extremes of temperature and pH. Fish proteins such as collagens and their gelatin derivatives operate at relatively low temperatures and can be used in heat-sensitive processes such as gelling and clarifying. Polysaccharides derived from algae, including algins, carrageenans, and agar, are widely used for their ability to form gels and act as thickeners and stabilizers in a variety of foods. Besides applications in food processing, a number of marine-derived compounds, such as omega-3 polyunsaturated fatty acids and photosynthetic pigments, are important to the nutraceutical industry. These bioactive ingredients provide a myriad of health benefits, including reduction of coronary heart disease, anticarcinogenic and anti-inflammatory activity. Despite the vast possibilities for the use of marine organisms in the food industry, tools of biotechnology are required for successful cultivation and isolation of these unique bioactive compounds. In this chapter, recent developments and upcoming areas of research that utilize advances in biotechnology in the production of food ingredients from marine sources are introduced and discussed.

Mexico's sugar mills face an uncertain future: the closure of San Sebastián may well presage others if the climate for sugar production on national and international levels does not improve. While the continued squeezing of small cane producers reflects processes affecting peasant agriculture generally in Mexico, and indeed beyond, the fate of the mill workers made redundant when the mill closed similarly mirrors broad tendencies in labor in both the developed and developing world under neoliberalism. Former workers fell back upon personal, family, and community resources by migrating to the U.S. or locally reconstructing livelihoods characterized by a reduction in income, security, and access to social benefits. This article reports on the impact of the mill closure on the livelihoods of former mill worker families in the community of San Sebastián and offers some observations on their responses to the situation.

Over the last 25 yr, cheese production in the United States has more than doubled with most of the increase due to production in the western states. Processing large volumes of milk into cheese has necessitated changes in vat size and design, reliance on computer software, and milk standardization, including use of membrane concentration of milk either at the cheese plant or on the farm. There has been increased interest in specialty cheeses including cheese made from sheep, goat, and organic milks. In addition, membrane processing of whey into various value-added components has become routine. Changes in cheese manufacturing protocols have resulted in a reduction of the manufacturing time and the necessity for consistent and reliable starter activity. Major advances in the genetics of microorganisms have not only resulted in widespread use of fermentation-produced chymosin but also in starter bacteria with improved resistance to bacteriophage infection. Genomics and proteomics have increased the likelihood of the development of nonstarter adjuncts with specific enzymatic activity. Indeed, the use of adjunct microorganisms to produce cheese with a unique flavor profile or to produce cheese with more consistent or better quality flavor has gained almost universal acceptance.

Advances in dairy foods and dairy foods processing since 1981 have influenced consumers and processors of dairy products. Consumer benefits include dairy products with enhanced nutrition and product functionality for specific applications. Processors convert raw milk to finished product with improved efficiencies and have developed processing technologies to improve traditional products and to introduce new products for expanding the dairy foods market. Membrane processing evolved from a laboratory technique to a major industrial process for milk and whey processing. Ultra-filtration and reverse osmosis have been used extensively in fractionation of milk and whey components. Advances in cheese manufacturing methods have included mechanization of the making process. Membrane processing has allowed uniform composition of the cheese milk and starter cultures have become more predictable. Cheese vats have become larger and enclosed as well as computer controlled. Researchers have learned to control many of the functional properties of cheese by understanding the role of fat and calcium distribution, as bound or unbound, in the cheese matrix. Processed cheese (cheese, foods, spreads, and products) maintain their importance in the industry as many product types can be produced to meet market needs and provide stable products for an extended shelf life. Cheese delivers concentrated nutrients of milk and bio-active peptides to consumers. The technologies for the production of concentrated and dried milk and whey products have not changed greatly in the last 25 yr. The size and efficiencies of the equipment have increased. Use of reverse osmosis in place of vacuum condensing has been proposed. Modifying the fatty acid composition of milkfat to alter the nutritional and functional properties of dairy spread has been a focus of research in the last 2 decades. Conjugated linoleic acid, which can be increased in milkfat by alteration of the cow's diet, has been reported to have anticancer, anti-atherogenic, antidiabetic, and antiobesity effects for human health. Separating milk fat into fractions has been accomplished to provide specific fractions to improve butter spreadability, modulate chocolate meltability, and provide texture for low-fat cheeses.

Those in the livestock industry involved in rearing animals and in producing milk, meat and eggs, must respond to two demands: one expressed by consumers, and the other by the public. Regarding consumers, demand for food produced by the livestock industry has shown steady growth for a century. Over the last few decades, this growth has been sustained by the developing countries, and is based mainly on pig and poultry production, which provides cheaper products. Regarding the public, society is showing greater concern about the conditions in which livestock is reared, transported and slaughtered. The public demands not only that ill treatment of animals be fought against and penalised, but also that any unnecessary suffering should be avoided and even that animals should be guaranteed a certain degree of 'comfort'. Animal health, the most important aspect of their welfare, has vastly improved, as has the care of sick or injured animals. At the same time, the latest amenities used in livestock rearing, transport and slaughter are helping to eliminate situations involving extreme stress and suffering. Finally, the motivation of industry players and the safety of those who work with livestock must be taken into consideration. Training of personnel and the implementation of guides to good practice or of quality control do as much to improve animal welfare as do overzealous regulations.

The nutrient content of food and animal feed may be improved through new knowledge about enzymatic changes in complex carbohydrates. Enzymatic hydrolysis of complex carbohydrates containing alpha or beta glycosidic bonds is very important in nutrition and in several technological processes. These enzymes are called glycosidases (Enzyme Class 3.2.1) and include amylases, pectinases and xylanases. They are present in many foods such as cereals, but their microbial analogues are often produced and added in many food processes, for instance to improve the shelf-life of bakery products, clear beer, produce glucose, fructose or dextrins, hydrolyse lactose, modify food pectins, or improve processes. However, many plant foods also contain endogenous inhibitors, which reduce the activity of glycosidases, in particular, proteins, peptides, complexing agents and phenolic compounds. The plant proteinaceous inhibitors of glycosidases are in focus in this review whose objective is to report the effect and implications of these inhibitors in industrial processes and applications. These studies will contribute to the optimisation of industrial processes by using modified enzymes not influenced by the natural inhibitors. They will also allow careful selection of raw material and reaction conditions, and future development of new genetic varieties low in inhibitors. These are all new and very promising concepts for the food and feed sector.

This paper analyses the patterns of change in the production and consumption of beef in Africa over the last two decades. A 'decomposition' method of analysis is used to examine the change in total beef production during this period, attributable to changes in herd size, in the proportion of cattle slaughtered and in productivity per head of cattle. Sub-regional aggregations are complemented with similar analyses for individual countries to demonstrate the diverse patterns of change in beef production and consumption. The results reveal an overall increase in total beef production (due mainly to an increase in cattle numbers and in the percentage of slaughtered cattle, rather than to productivity gains), a stagnation in per capita production, and an overall increase in the total consumption of beef and a decline in per capita consumption (due mainly to faster population growth and urbanisation, and a decline in per capita income, respectively).

In this work some of the newest trends in food processing are reviewed. This revision intends to provide an updated overview (including works published until February 2001) on the newest food processes, including food manufacturing, preservation, and control. Modern processes for food and food ingredients manufacturing based on membrane technology, super-critical fluid technology, and some applications of biotechnology are presented, mainly applied to obtain functional foods, "all-natural" enriched foods, probiotics and prebiotics. Also included is a critical assessment concerning non-thermal preservation techniques used for food preservation, such as high hydrostatic pressure, pulsed electric fields, ultrasound, pulsed light, hurdle systems, etc. Finally, a group of new analytical techniques (i.e., molecular techniques such as Polymerase Chain Reaction (PCR), food image analysis, and biosensors) and their use for food and process control is reviewed.