Search

Age estimation in forensic odontology is mainly based on the development of permanent teeth. To register the developmental status of an examined tooth, staging techniques were developed. However, due to inappropriate calibration, uncertainties during stage allocation, and lack of experience, non-uniformity in stage allocation exists between expert observers. As a consequence, related age estimation results are inconsistent. An automated staging technique applicable to all tooth types can overcome this drawback. This study aimed to establish an integrated automated technique to stage the development of all mandibular tooth types and to compare their staging performances. Calibrated observers staged FDI teeth 31, 33, 34, 37 and 38 according to a ten-stage modified Demirjian staging technique. According to a standardised bounding box around each examined tooth, the retrospectively collected panoramic radiographs were cropped using Photoshop CC 2021® software (Adobe®, version 23.0). A gold standard set of 1639 radiographs were selected (n31 = 259, n33 = 282, n34 = 308, n37 = 390, n38 = 400) and input into a convolutional neural network (CNN) trained for optimal staging accuracy. The performance evaluation of the network was conducted in a five-fold cross-validation scheme. In each fold, the entire dataset was split into a training and a test set in a non-overlapping fashion between the folds (i.e., 80% and 20% of the dataset, respectively). Staging performances were calculated per tooth type and overall (accuracy, mean absolute difference, linearly weighted Cohen's Kappa and intra-class correlation coefficient). Overall, these metrics equalled 0.53, 0.71, 0.71, and 0.89, respectively. All staging performance indices were best for 37 and worst for 31. The highest number of misclassified stages were associated to adjacent stages. Most misclassifications were observed in all available stages of 31. Our findings suggest that the developmental status of mandibular molars can be taken into account in an automated approach for age estimation, while taking incisors into account may hinder age estimation. [ABSTRACT FROM AUTHOR]

The identification of deceased migrants is a global challenge that is exacerbated by migration distance, post-mortem conditions, access to ante-mortem data for comparison, inconsistent international procedures and lack of communication between arrival and origin countries. Due to low technology requirements, fast speed analysis and ease of transferring digital data, facial image comparison is particularly beneficial in those contexts, especially in challenging scenarios when this may be the only initial ante-mortem data available to identify the deceased. The Facial Identification Scientific Working Group (FISWG) professional guidelines for facial image comparison were developed for living facial appearance, and, therefore, a tailored protocol for the application of post-mortem to ante-mortem facial image comparison was proposed and evaluated in this research. The protocol was investigated via an inter-observer and an accuracy study, using 29 forensic cases (2001–2020) from the University of Milan, provided by the Laboratory of Forensic Anthropology and Odontology. In order to replicate a migrant identification scenario, each post-mortem subject was compared to all 29 ante-mortem targets (841 comparisons). The protocol guided the practitioner through stages of facial image comparison, from broad (phase 1) to more detailed (phase 3), eventually leading to a decision of 'exclusion' or 'potential match' for each post-mortem to ante-mortem case (phase 4). In phase 4, a support scale was also utilised to indicate the level of confidence in a potential match. Each post-mortem subject could be recorded with multiple potential matches. The protocol proved to be useful guide for facial image comparison, especially for less experienced practitioners and the inter-observer study suggested good reproducibility. The majority (82–96%) of ante-mortem subjects were excluded at the first stage of the protocol, and 71 full post-mortem to ante-mortem facial image comparisons were carried out. On average, two or three potential matches were recorded for each post-mortem subject. The overall accuracy rate was 85%, with the majority (79%) of ante-mortem non-targets correctly excluded from the identification process. An increased number and quality of available ante-mortem images produced more successful matches with higher levels of support. All potential matches involving non-targets received low levels of support, and for 73% of the post-mortem subjects, the ante-mortem target was the only recorded potential match. However, two ante-mortem targets were incorrectly excluded (one at the first stage of the protocol) and therefore changes to the protocol were implemented to mitigate these errors. A full protocol and a practical recording chart for practitioner use is included with this paper. [ABSTRACT FROM AUTHOR]

The timing of dental development in ethnic Finns and Somalis, who were born and living in Finland, was compared, with efforts to minimize environmental bias. The developmental status of seven lower left permanent teeth were staged according to Demirjian et al., using panoramic radiographs from 2,100 Finnish and 808 Somali females and males, aged 2 to 23 years. For each tooth, a continuation-ratio model was constructed to analyze the allocated stages as a function of sex and ethnic origin. Several statistically significant differences in mean age of certain tooth developmental stage transitions were revealed. While Somalis generally displayed stage transitions at younger age, none of the seven teeth consistently showed earlier stage transitions in Somalis compared to Finns. Within each tooth, the lowest (or highest) mean age of stage transition varied without any discernible pattern between the two ethnic groups. Overall, the observed differences in mean age of stage transition between the groups was minimal, suggesting a low impact on clinical and forensic age assessment practice. In conclusion, the studied ethnic Finn and Somali groups with equal nutritional and /or environmental conditions exhibit similar timing in the development of all lower left permanent teeth. [ABSTRACT FROM AUTHOR]

Investigation of the biological sex of human remains is a crucial aspect of physical anthropology. However, due to varying states of skeletal preservation, multiple approaches and structures of interest need to be explored. This research aims to investigate the potential use of distances between bifrontal breadth (FMB), infraorbital foramina distance (IOD), nasal breadth (NLB), inter-canine width (ICD), and distance between mental foramina (MFD) for combined sex prediction through traditional statistical methods and through open-access machine-learning tools. Ethical approval was obtained from the ethics committee, and out of 100 cone beam computed tomography (CBCT) scans, 54 individuals were selected with all the points visible. Ten extra exams were chosen to test the predictors developed from the learning sample. Descriptive analysis of measurements, standard deviation, and standard error were obtained. T-student and Mann–Whitney tests were utilized to assess the sex differences within the variables. A logistic regression equation was developed and tested for the investigation of the biological sex as well as decision trees, random forest, and artificial neural networks machine-learning models. The results indicate a strong correlation between the measurements and the sex of individuals. When combined, the measurements were able to predict sex using a regression formula or machine learning based models which can be exported and added to software or webpages. Considering the methods, the estimations showed an accuracy rate superior to 80% for males and 82% for females. All skulls in the test sample were accurately predicted by both statistical and machine-learning models. This exploratory study successfully established a correlation between facial measurements and the sex of individuals, validating the prediction potential of machine learning, augmenting the investigative tools available to experts with a high differentiation potential. [ABSTRACT FROM AUTHOR]

Background Estimating stature is essential for the purpose of identifying human remains after death. It is common for the extremities or the head to be amputated from the trunk when the body has been severely disfigured. Odontometry's association with stature determination in forensic odontology required an estimate to be established. Objective The objective of this study was to investigate and correlate stature (height) of the individual with the incisoapical length of the tooth Material and Method The study was conducted on 106 participants, in which 53 were female and 53 male cases aged between 21 and 45 years. The study parameters included incisoapical length of maxillary and mandibular central incisor, lateral incisor and canine of both sides measured using cone-beam computed tomography, and height of an individual recorded using stadiometer. Pearson's correlation coefficient was calculated to study the correlation. Results It is observed that the cervicoapical measurement of teeth does not show statistically significant correlation with the stature of the individual with the exception for tooth 22 (r = − 31, p = 0.02), 41(r = − 0.28, p = 0.04), and 42 (r = − 0.30, p = 0.02) among females and tooth 31 (r = − 0.35, p = 0.009) among males. Conclusion A very small number of research on an individual's stature in relation to incisoapical length has been identified in the literature. The majority of an individual's anterior teeth's height was not significantly correlated with height. [ABSTRACT FROM AUTHOR]

Dental identification systems (DISs) encompass various techniques used for forensic identification, serving as alternatives or complements to genetic methods. Technologies such as microchip implants, prosthetic inscriptions, microSD cards, and identification plaques have been proposed to address limitations in comparative methods, offering streamlined processes for forensic experts. This study reviews current and potential DIS implementations, emphasizing cost-effectiveness and community benefits. Literature analysis from PubMed (2008–2024) yielded 17 relevant articles on implantable DISs, enabling direct subject identification via teeth or prostheses. The integration of DIS aims to enhance accuracy and speed in personal profiling and legal identification, promoting technology transfer in dentistry. It will be necessary to develop strict privacy regulations to protect patient data and establish ethical guidelines for their use. The study's aim is to highlight that the universal adoption of DISs could mitigate healthcare disputes and facilitate data exchange in clinical settings, which is particularly beneficial for vulnerable populations. [ABSTRACT FROM AUTHOR]

Purpose: This study aimed to analyze black tattoo inks by means of energy dispersive spectroscopy and backscattered scanning electron microscopy. Methods: The sample consisted of five types of commercial tattoo pigments of the black colour (Easy Glow™, Electric Ink™, Iron Works™, Master Ink™, and Viper™). An Energy Dispersive Spectroscopy (EDS) detector (Silicon Drift Detector – SDD – type) attached to a Scanning Electron Microscope (SEM) device (Tescan Vega3 LMU, Libusina, Czech Republic) was used. X-ray characteristic signs were detected for each tattoo ink in an interval between 0 and 2.5 keV. The electron acceleration potential in the microscope was 15 keV. Two regions were analyzed for each sample (n = 10). On each region, a micrography of backscattered electrons (BSE) was obtained. Means and standard deviations (SD) of the weight percentages (Wt%) were calculated. Results: C and O were predominant, with a mean O/C ratio between 2.69 and 2.74 Wt%. Electric Ink and Master Ink were the most similar pigments, while Easy Glow was the most distinctive — with agglomerates of Al that had a concentration 25 × higher than other specimens. Other compounds detected in the sample were Cl and Cu. Conclusion: EDS and SEM were efficient to distinguish black tattoo inks. These are our preliminary outcomes on the use of EDS and SEM to analyze black tattoo inks. Thus, careful interpretation is necessary to avoid rash applications in human identification practice. [ABSTRACT FROM AUTHOR]

Bite mark analysis is among the most interesting research fields in forensic odontology; however, it is limited by its dependence on the employed method as well as assessor subjectivity, particularly when using morphological analysis or DNA profiling. These limitations are due to differences in DNA collected from saliva adhering to a living or inanimate body, as well as differences in exocrine fluid secretion and deposition amount among individuals. This study aimed to analyze the effectiveness of DNA profiling when there are differences in the amount of saliva adhering to a living body and when time has elapsed since deposition. Most allele peaks could be identified in 1 µl of saliva, even 9 h after saliva deposition and examination. Consistent results were obtained following saliva deposition in an individual who had engaged in up to 9 h of free activity. The results of this study demonstrate the validity and reliability of DNA profiling for bite mark analysis and are extremely important as they can demonstrate the usefulness of the little information left by a suspect on a victim's body. [ABSTRACT FROM AUTHOR]

Dental age estimation (DAE) is key to establishing an individual's identity, and this is relevant in minors. A widely used method for DAE in children is Cameriere's open apices (CAM). Despite its wide dissemination, there are no clear reports of its use in Latin American populations. A scoping review was conducted using a search strategy in the PubMed/MEDLINE database, Web of Science, and a complementary manual search. Only papers using CAM or its regression equation models for evaluating Latin American populations were included. Ten studies published between 2007 and 2020 responded to the search objective. Brazil was the country with the most studies using CAM (7/10), and the University of Macerata (Italy) was the most declared affiliation (6/10). Seven studies used the original CAM formula in populations from Brazil and Peru, while the European formula (EuCAM) was applied in Mexico, Colombia, and Brazil. Although the method underestimated the age values with acceptable error margins, the correction factor substantially improved the predictive power of the method. Some limitations of the method are highlighted. CAM and its variants can be useful for validation in Latin American settings, but attention to population structures and terminologies is suggested for future research. [ABSTRACT FROM AUTHOR]

Objective: The present study aimed to compare the validity of different dental markers as pulp to tooth volume ratio, root dentin translucency, and cementum annulation in chronological age determination. The reliability of the results was amended using (multiple linear regression equation) through the measurements obtained from pulp to tooth volume ratio and root dentin translucency. Materials and Methods: 150 extracted maxillary first premolars were investigated using Cone-beam computed tomography imaging and Mimics software application to obtain pulp to tooth volume ratio, then ground sections were prepared to measure the length of the vertical extension of the root dentin translucent zones using polarized light microscopy. To count incremental lines of cementum, phase contrast microscopy was used. Comparison between the three methods to the chronological age was carried out to obtain the most reliable one. Results: The linear regression equation using root dentin translucency, and for cementum annulation were both statistically significant (p<0.001). The multiple linear regression model showed a significant effect on age prediction (p<0.001). Conclusion: Our comparative study which is age related concluded that cementum annulation using phase contrast microscopy gave the best and most reliable results in correlation to the chronological age (mean value of -0.01) followed by root dentin translucency using polarized light microscopy (mean value -0.018). Pulp to tooth volume ratio using Cone-beam computed tomography imaging and Mimics software revealed the weakest results in relation to the chronological age. Thus, multiple linear regression model in cementum annulation and root dentin translucency can be used to increase the reliability of the obtained results. [ABSTRACT FROM AUTHOR]

Lateral cephalometric radiographs are crucial in dentistry and orthodontics for diagnosis and treatment planning. However, their use in forensic identification, especially with burned bodies or in mass disasters, is challenging. AM (antemortem) and PM (postmortem) radiographs can be compared for identification. This study introduces and evaluates a novel algorithm for extracting cranial patterns from digital lateral cephalometric radiographs for identification purposes. Due to the unavailability of AM cephalograms from deceased individuals, the algorithm was tested using pre- and post-treatment cephalograms of living individuals from an orthodontic archive, considered as AM and PM data. The proposed algorithm encodes cranial patterns into a database for future identification. It matches PM cephalograms with AM records, accurately identifying individuals by comparing cranial features. The algorithm achieved an accuracy of 97.5%, a sensitivity of 97.7%, and a specificity of 95.2%, correctly identifying 350 out of 358 cases. The mean similarity score improved from 91.02% to 98.10% after applying the Automatic Error Reduction (AER) function. Intra-observer error analysis showed an average Euclidean distance of 3.07 pixels (SD = 0.73) for repeated landmark selections. The proposed algorithm shows promise for identity recognition based on cranial patterns and could be enhanced with artificial intelligence (AI) algorithms in future studies. [ABSTRACT FROM AUTHOR]

This paper reviews MFI's from a historical perspective commencing with DVI in the late 20th century. For this paper, this era, 1970–90s is designated as the early modern period. As DVI by DNA analysis is introduced into the process, in the beginning of the mid‐1990s, or late modern period, a shift in ID modality usage is noted. A statistical analysis of the primary identification (ID) methods established that dental identification was the majority identifier, or gold standard, in the early modern era. Although primarily viewed from a United States (US) perspective, referenced international incidents parallel the incidents investigated by US authorities. The introduction of DNA demarcated the early from the late modern era. Through research, development, and application this highly discriminating ID method would effectively, surpass dental ID as the gold standard into the late modern era. DNA ID would eventually overcome early criticism regarding cost and time consumption. In the MFI's discussed, the discriminating accuracy of DNA, when referenced against the dental identifications, validated the reliability of dental ID. Errors will be significantly minimized through confirmatory reconciliation by more than one ID method. In conclusion despite increased usage of DNA, dental ID has not been eliminated and remains a major contributor to DVI. Dental ID continues to develop through increased application of advanced imaging technology. Despite DNA's rapid advancement and application to DVI, the multidisciplinary approach to scientific identification should remain in the near future. Therefore, comparative dental ID will remain an important and reliable contributor to DVI. [ABSTRACT FROM AUTHOR]

Dental identification is a pillar of disaster victim identification (DVI). Dental identification is accurate, efficient, inexpensive, and accepted in courts of law. The (known) antemortem (AM) dental charts and radiographic images acquired from the dentist of the missing person are evaluated, processed, and compared to post mortem (PM) findings present in the dentition or fragments of the dentition of the deceased individual. These comparisons evaluate and assess individuating restorative dental work, dental anatomical areas of concordance, spatial relationships of teeth one to another, and occasionally calculate the degree of "uniqueness" of either or both of the AM and PM dentition compared to known population databases. In a multiple fatality incident, odontologists may utilize age stratification to assist other means of identification. Computer comparison algorithms using recorded data can indicate possible matches between AM and PM data sets. Following clinical assessment, collection of post mortem tooth specimens for DNA profiling generation may be undertaken. This paper will highlight modern and efficient use of these tools. The framework for how dental identification in these incidents is currently managed is presented. The authors propose a change to this approach that moves away from interpretive subjective assessment toward comparisons based largely on objective data. The aim of this paper is to highlight the benefits of minimizing subjective decisions and maximizing objective data in the dental DVI process while simultaneously reducing risk to clinical personnel and minimizing costs by reducing the number of clinicians required onsite. [ABSTRACT FROM AUTHOR]

Objectives: This study aimed (I) to test the Willems’ dental age estimation method in different geographic samples of the Brazilian population, and (II) to propose a new model combining the geographic samples in a single reference table of Brazilian maturity scores. Materials and methods: The sample consisted of 5017 panoramic radiographs of Brazilian males (n = 2443) and females (n = 2574) between 6 and 15.99 years (mean age = 10.99 ± 2.76 years). The radiographs were collected from the Southeastern (SE) (n = 2920), Central-Western (CW) (n = 1176), and Southern (SO) (n = 921) geographic regions. Demirjian’s technique was applied followed by Willems’ method and the proposed Brazilian model. Results: Willems’ method led to mean absolute errors (MAE) of 0.79 and 0.81 years for males and females, respectively. Root mean squared errors (RMSE) were 1.01 and 1.03 years, respectively. The Brazilian model led to MAE of 0.72 and 0.74 years for males and females, respectively, and RMSE of 0.93 years for both sexes. The MAE was reduced in 70% of the age categories. Differences between regions were statistically (p < 0.05) but not clinically significant. Conclusion: The new model based on a combined population had an enhanced performance compared to Willems’ model and led to reference outcomes for Brazilians. Clinical relevance: Assessing patients’ biological development by means of dental analysis is relevant to plan orthopedic treatments and follow up. Having a combined-region statistic model for dental age estimation of Brazilian children contributes to optimal age estimation practices. [ABSTRACT FROM AUTHOR]

Copyright of Acta Stomatologica Croatica is the property of Acta Stomatologica Croatica and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Background: The concept of comparing "chronological age" vs. that of "dental age" has been well documented. Considering ethnic variations in dental development, the use of population-specific standards for age estimation has been emphasized. Mandibular maturity markers have been successfully employed to estimate the age of a person at the 18-year threshold. No such data are available for the Chinese population, which represents around one-fifth of the global human population. Aim: The aim of this research project was to analyze and grade mandibular third molars using maturity markers in the Chinese population. Materials and Methods: In total, 882 panoramic radiographs (424 females and 458 males) of 16- to 24-year-old Chinese children and young adults were obtained from patient archives. All patients were graded by a trained and calibrated examiner using stages A-D for mandibular maturity markers including Periodontal Ligament Visibility (PLV) and Root Pulp Volume (RPV). Results: The average Age at Assessment (AaA) ranged from 18.79 years for females in Stage A of PLV to 21.59 years for females in Stage D of PLV. The AaA was not statistically significant between females and males across all the stages, for both PLV and RPV. For PLV, the percentage of females below 18 years was 57.14% in Stage A and 17.14% in Stage D. For males, it was 48.84% in Stage A and 14.93% in Stage D. For RPV, the percentage of females below 18 years was 54.72% in Stage A and 12.73% in Stage D. For males, it was 49.09% in Stage A and 14.81% in Stage D. On average, for PLV, 85.30% of subjects were over 18 years of age in Stages C and D, and for RPV, 82.50% subjects were over 18 years of age in Stages C and D. Conclusions: Both RPV and PLV are considered as reliable maturity markers to estimate the age of Chinese subjects in the 18-year threshold. No difference was observed in the average Age at Assessment of mandibular maturity stages between the sexes. [ABSTRACT FROM AUTHOR]

Background: Artificial intelligence (AI) technology is a trailblazer in obtaining critical information in oral observational studies involving forensic medicine. It holds immense potential in forensic odontology. Machine learning’s involvement in our daily lives has doubled. The constructive upgraded mechanism of machine learning involved in exploring lip print patterns is a crucial perspective for future diagnostic studies. Objectives: To illuminate the significance and application of AI technology in forensic odontology, specifically lip print analysis. The cardinal objective is to identify the most effective algorithm for lip print analysis using AI. Methodology: The data for this study were collected by conducting a thorough search of articles published in reputable search engines between January 2010 and January 2024. The QUADAS-2 tool forms an impression of the risk of bias in the selected studies. Search engines such as PubMed, Web of Science, Scopus, and Cochrane were extensively searched for data collection. Results: All studies shortlisted for this review present promising results. Results showed that of all algorithms, VGG16 and VGG19 are better than other algorithms in terms of accuracy, precision, and recall. Conclusion: Our focus in this study is to determine whether AI is efficient in providing results for lip print pattern analysis and standardize an AI network algorithm that works best for it.

Post-mortem interval (PMI) estimation remains one of the major challenges in forensic practice, especially for late PMIs beyond 7–10 days after the death of the subject. In 2022, an innovative method to investigate the occurrence of mutations induced by the death of a subject in the DNA of post-mortem dental pulps at different PMIs was developed, applying a next-generation sequencing (NGS) analysis. The present study aims to apply the same method of analysis to a small sample of teeth belonging to the same subject and analyzed at different PMIs/accumulated degree days (ADDs), and of teeth extracted from different subjects but analyzed at the same PMI/ADD to verify the repeatability of the results obtained in relation to the time elapsed since death. A total of 10 teeth were collected from 6 patients (3 males and 3 females) with PMI varying from 8 to 35 days, and ADD from 157.4 to 753.8. We found 1754 mutations in 56 genes, with more than 700 mutations having a prevalence > 5% and more than 300 variants considered of interest for the purposes of the study. Mutations that were not present at lower PMIs but manifested in later PMIs in pulps belonging to the same subject demonstrate that they can only have been acquired by the subject after death and according to the time elapsed since death. In total, 67 somatic mutations in 29 out of the 56 genes of the used panel occurred in a fashion that allows an association with specific PMI/ADD ranges (within 8 days, between 17 and 28, and beyond 30 days after death). The results suggest that temperature and humidity could influence the rate of DNA degeneration in dental pulps, thus PMI should be estimated in ADD more than days. The preliminary validation supports the hypothesis that the innovative method could be a useful tool for estimating the post-mortem interval even beyond the first week after death, but further analyses are needed to customize a specific genetic panel for forensic investigations and verify the influence of degenerative processes of soft tissues surrounding dental elements on DNA degeneration of pulps. [ABSTRACT FROM AUTHOR]

Simple Summary: Over the course of the past 3 million years, changes in human habitats, nutrition and behaviour have led to continuous processes of shape modification and size reduction in our jaws and teeth. These have resulted in the specific masticatory system observed today and the widespread need for orthodontic treatment. The aim of this study was to identify correlations between tooth sizes, jaw dimensions, biological sex and stature in a central European sample. We observed differences between women and men with regard to their tooth and jaw dimensions. In general, men's teeth, especially the canines, are larger. There are also differences in tooth sizes and jaw dimensions in relation to stature, with the canines again standing out. Our results help us to better understand the evolutionary trends affecting our teeth. They also indicate that, while the basic sexual dimorphisms of our primate ancestors have been retained, modern dietary habits will further intensify the reduction in the masticatory apparatus. Furthermore, the results provide sex-specific metric data of forensic significance, as well as clues as to why more and more people require orthodontic treatment, while suggesting possible causes for diachronic differences in tooth and jaw dimensions between populations. Dental anthropology provides a deep insight into biological, ecological and cultural aspects associated with human individuality, behaviour and living conditions and the environment. Our study uses a correlation analysis to test the metric relationships between tooth sizes and jaw dimensions and juxtaposes them with biological sex and stature. A sample of n = 100 dental casts was used to record metric dental data including the mesio-distal and bucco-lingual tooth crown diameters and nine upper and lower jaw dimensions. All crown diameters were highly correlated with both stature and biological sex, with the canines exhibiting the highest correlation. The majority of jaw dimensions exhibited similar correlations. Our results suggest that the differences between the sexes in most crown diameters and some jaw dimensions may be related to the stature of the individuals measured. Two groups of closely correlating features emerged among the jaw dimensions, differing in their degree of correlation with crown diameters and with sex. The results and insights obtained are highly relevant for evolutionary biology, dentistry, craniofacial research, bioarchaeology and forensic odontology. [ABSTRACT FROM AUTHOR]

This study aims to explore tooth growth variation by regions and ethnicity in China, and to validate the modified Tibetan so as to assist in proposing a better approach. A total of 1320 orthopantomograms of Han children aged 4–14.99 were retrospectively collected from eastern and western regions of China. The Demirjian method and modified Tibetan method were applied. Results showed that dental maturity scores (DMS) in eastern children were significantly greater than western children. Age was overestimated by both methods in eastern children. MAE was 0.88 and 1.3 years by Demirjian method, 1.01 and 1.21 years by modified Tibetan method in eastern girls and boys respectively. In western children, age was significantly underestimated in girls and slightly overestimated by Demirjian method; by modified method, age was generally overestimated. MAE was 0.79 and 0.84 years by Demirjian method, 0.51 and 0.69 years by modified Tibetan method in girls and boys respectively. The current study reveals that tooth growth was significantly advanced in Eastern Han children compared with Western Han children. Ethnic variation between Eastern Han and Tibetan Chinese was substantial. Neither method was sufficiently accurate in Eastern Han children. The modified Tibetan method was reliable in Western Han children. [ABSTRACT FROM AUTHOR]

Age estimation methods through developmental atlases are simplified by image comparison using radiographs. Atlas‐based methods have been utilized to create population‐specific charts addressing population diversity. To tackle the absence of a dedicated atlas for the Brazilian population, the objective of the present study was to create a new atlas for dental development in Brazil based on the London Atlas chart. The new atlas (RP Atlas) is based on the median of tooth development, eruption, and resorption in individuals aged 5 to 23. The sample (567 individuals) was divided between females (n = 290) and males (n = 277). The RP Atlas was handcrafted, scanned, colored, and clustered in two atlases divided by sex. The development of a specific atlas for the Brazilian population has the potential to enhance the accuracy of age estimation in forensic scenarios, notably in a mixed country like Brazil. Further research is needed to assess the suitability of the newly developed atlas for the Brazilian population. Research Highlights: Atlas development methods provide a more straightforward image comparison using OPGs.Methods for age estimation need to be adaptable to a population‐specific approach.RP Atlas is Brazil's first specific atlas of tooth eruption and development.From 18 years old onwards, dental development has unstable patterns. [ABSTRACT FROM AUTHOR]

Purpose: The current study proposes the comparison of the visualization and identification of anatomical details between natural human temporal bone, its respective copy from three-dimensional printing, and the virtual model obtained from CBCT. Methods: The sample consisted of undergraduate students in Dentistry (Group UE, n = 22), Postgraduate students in Radiology and Imaging (Group P-RI, n = 20), and Postgraduate students in Forensic Odontology (Group P-FO, n = 24). All participants attended a theoretical class on specialized anatomy of the temporal bone and subsequently performed the markings of 10 determined structures. Results: The number of correct identifications was similar in natural bone and printed three-dimensional models in all groups (p > 0.05). The virtual model showed a significantly lower number of correct structures (p < 0.05) in the 3 groups. In general, there were significantly higher percentages of accurate answers among postgraduate students compared to undergraduate students. Most graduate students believed that the printed three-dimensional model could be used to teach anatomy in place of natural bone, while undergraduate students disagreed or were unsure (p < 0.05). Regarding the virtual tomographic image, in all groups, students disagreed or were not sure that its use would be beneficial in replacing natural bone. Conclusion: Three-dimensional and virtual models can be used as auxiliary tools in teaching anatomy, complementing practical learning with natural bones. [ABSTRACT FROM AUTHOR]

Aim and objectives: This study evaluated the awareness, knowledge, and attitude regarding forensic odontology (FO) among dental students and graduates at Beni-Suef University and Badr University in Cairo, Egypt. Methods: This cross-sectional study included 316 dentists and dental students in their final year of undergraduate study. An online self-administered questionnaire in English was used to obtain participants' responses. Results: Less than half of the participants (47.5%) were aware of the branch of dentistry named FO. The highest percentages of correct answers in the knowledge assessment were reported in dental age estimation questions, while the lowest percentages were in items related to the use of FO in confirming sexual abuse and using palatal rugae as a marker in forensic identification. The most common source of knowledge was the internet (52.0%). Only 11.1% of the participants received FO courses in their colleges. Studying FO as a postgraduate course was interesting to 67.4% of the participants. The knowledge score was significantly associated with the participants' gender, graduation status, and educational level. Conclusion: This study revealed a lack of awareness of FO as a branch of dentistry among dental students and dentists in Egypt. Increasing awareness and knowledge of FO could be achieved by integrating FO into the dental curriculum at both undergraduate and postgraduate levels. [ABSTRACT FROM AUTHOR]

Background: Forensic Odontology developed as a discipline in 1898 with the publication of its first textbook; however, 126 years later, a standardised core curriculum for formal training in Forensic Odontology has yet to be decided. This website scoping review aims to provide information on three main distinct categories (and 17 subcategories): Availability, Content, and Quality of Forensic Odontology education globally. The information on formal education programmes was gathered by conducting a web search using ‘Google Search’ in English, Arabic, Spanish, and French languages between June and July 2022. Highlights: Fifty-six programmes from 18 countries met the inclusion criteria. Of the 14 master's and 42 diploma programmes, only 7.14% provided information on their websites from all the subcategories investigated. The highest numbers of master's and postgraduate diploma programmes were identified in Europe (18 programmes), South America (15), North America (11) and Asia (7). A practical aspect was included by 10 master’s and 12 diploma programmes’ websites. Research integration in various forms was included by 11 master’s and seven diploma programmes. Conclusion: Programme providers and applicants must critically consider the quality of the programme being designed or applied to as there are currently no international training standards in Forensic Odontology. This study has developed an ‘International Database of Forensic Odontology Programmes’ (IDFOP). [ABSTRACT FROM AUTHOR]

Introduction: The aim of this study was to evaluate whether a forensic odontologist working remotely could accurately undertake forensic dental identifications using videos produced by non-dental forensic staff operating an intra-oral video camera (IOVC). The study’s aims were to assess the accuracy and time taken to perform remote forensic dental identifications in this manner. Materials and methods: Eight cadavers from the Centre for Anatomy and Human Identification (CAHID), University of Dundee, UK, were examined by a forensic odontologist via a traditional dental examination. Their dental condition was recorded to serve as ante-mortem records for this study. Videos of each dentition were produced using an IOVC operated by a medical student. Post-mortem records were produced for each dentition from the videos by a remote second forensic odontologist who was not present at the traditional dental examination. The ante-mortem and post-mortem records were then compared, and identification was classified as positively established, possible or excluded. Results: Established identifications were positively made in all eight cases although there were some non-critical inconsistencies between ante-mortem and post-mortem records. Before the second opinion, 85.6% of the teeth per study subject were charted consistently. After the second opinion, the percentage of consistency increased to 97.2%. Each video on average was about 4.13 minutes in duration and the average time taken to interpret and chart the post-mortem dental examination at the first attempt was 11.63 minutes. The time taken to chart from the videos was greater than is typical of a traditional dental examination. Conclusion: This pilot study supports the feasibility of undertaking remote dental identification. This novel virtual dental autopsy approach could be a viable alternative to a traditional post-mortem dental examination, in situations where access to forensic dental services is difficult or limited due to geographical, logistical, safety, and/or political reasons. [ABSTRACT FROM AUTHOR]

Background: The stage of tooth formation is one of the most reliable indicators for predicting a patient's developmental age by radiographs. This study compared the accuracy of three distinct dental age estimation methods (Demirjian, Nolla, and Willems) in children aged 3–17 in the northern Iranian population. Methods: This cross‐sectional study examined panoramic radiographs of 434 children aged 3–17 from Mazandaran Province, Iran, who had teeth 31–37 present on the left mandible. This study employed the Demirjian, Nolla, and Willems methods to estimate the dental age of the sample and compare it with the chronological age. The data were analyzed using SPSS v16. A paired t‐test was used to compare chronological and dental ages. The Pearson correlation was used to correlate the chronological and dental ages. The errors of different methods were compared using the Wilcoxon test. P values < 0.05 were considered significant for all tests except Wilcoxon. For Wilcoxon, a P value < 0.017 was considered significant. Results: The three methods presented differing mean estimated ages. The Demirjian method delivered the highest mean, and all three methods differed significantly when compared in pairs. The results showed that the Demirjian method overestimated chronological age by 0.25 years (P < 0.001) in girls and 0.09 years (P = 0.28) in boys. The Willems method underestimated chronological age by 0.05 years (P = 0.47) in girls and 0.12 years (P = 0.13) in boys. The Nolla method underestimated chronological age by 0.41 years (P < 0.001) in girls and 0.40 years (P < 0.001) in boys. The accuracy of each method varied with the patient's age. Conclusion: According to the findings, the Willems method outperformed the Demirjian method, and the Demirjian method exceeded the Nolla method for estimating dental age in Iranian children aged 3–17. Overall, the Demirjian method overestimated the age of the study population, whereas the other two underestimated it. [ABSTRACT FROM AUTHOR]

This article provides an overview of forensic odontology (FO) in Latin America, which involves the application of dentistry to the field of law. It discusses the unique characteristics of Latin American FO, influenced by the region's history, cultural identity, and diverse languages. The article highlights the contributions of Dr. Oscar Amoëdo Valdés, known as the "father of forensic dentistry worldwide," and his impact on the development of FO in Latin America. It also discusses the challenges faced by Latin American FO, such as lack of resources and institutional support, and emphasizes the need for standardization and integration into the global community. The article concludes by recognizing the opportunity for Latin American FO to contribute to the international scene with its unique approaches and proposals. [Extracted from the article]

While forensic pathologists have always played a pivotal role in victim identification after mass casualties, new developments in forensic methods have given forensic anthropologists more agency in positively identifying individuals who were previously unidentifiable. This review aims to contribute to the refinement of diagnostic tools, ensure optimal utilization of remnants and information available, and emphasize the contributions of forensic pathologists and forensic odontologist to victim identification and the importance of forensic pathologists and forensic odontologist in the criminal justice system. Considering the Interpol DVI Guide's emphasis on fingerprints, dental examinations, and DNA as primary identifiers, the forensic pathologist's role as the leader of a multidisciplinary team of experts in a disaster situation has taken on new significance. This is due to the forensic pathologist's and forensic odontologist training and experience leading similar teams during routine operations at a forensics institute. This thorough examination highlights the utmost significance of the job carried out by forensic pathologists and forensic odontologist. They play an important role in the judicial process by providing expert views in criminal investigations. Their expertise ensures accurate identification of victims and provides critical evidence that is necessary for holding offenders responsible. Their contributions are fundamental to the administration of justice, highlighting the great importance of their function in the overall structure of the criminal judicial system. [ABSTRACT FROM AUTHOR]

BACKGROUND: Forensic odontology is a subfield of forensics that can assist in determining age, gender, and other demographic factors. OBJECTIVE: The focus of this research is to ascertain age by tooth volume ratio of permanent maxillary canines using a CBCT scan. METHODS: In this retrospective investigation, 1000 CBCT images were gathered and focused on only fully developed maxillary canines. For each of the maxillary canines, the researchers measured and calculated the volume of the pulp chamber, root canal, and entire tooth using the ITK Snap programme. The pulp volume to tooth volume ratio was computed. The equation AGE = 59.208 - (583.652 x pulp volume/tooth volume) was then used to compute age. The samples were divided into 5 age groups; 13–20, 21–30, 31–40, 41–50, and 51–60. The age was calculated for samples in each group and it was compared to the actual age. RESULTS: Between individuals' actual age and computed age, the study discovered a statistically significant positive association. While groups 3, 4, and 5 demonstrated positive but weaker correlations (r = 0.854, r = 0.658, and r = 0.612, respectively), groups 1 and 2 displayed statistically significant strong positive correlations (r = 0.987 and r = 0.923, respectively). The average total discrepancy between the age that was computed and the actual age was 2.45 1.344. CONCLUSION: The study found a statistically significant positive correlation between computed age and actual age, with the younger age groups 1 (13–20) and 2 (21–30) showing the strongest relationships. This underlines its potential success in court, particularly when dealing with young criminals. [ABSTRACT FROM AUTHOR]

Introduction: Age estimation plays a vital role in various medico legal cases including both civil and criminal litigations. Assessment of age of an individual by examination of teeth is one of the universally accepted methods of age estimation. In the present study we observed the patterns of dental eruption in Coimbatore. In this study we considered the eruption pattern of all permanent teeth (Molar 1 teeth, Central Incisor teeth, Lateral Incisor teeth, Pre Molar 1, Pre Molar 2, Canine and Molar 2). Material and Methods: The present study was a community based cross sectional study conducted in C.R.R. Matric Higher Secondary School, Ondipudur. C.R.R. Mat.Hr.Sec. School (CMHSS) located at Coimbatore S.S. Kulam, Ondipudur, The study was conducted among 1000 study participants. Results: The mean age for complete eruption of the first molar teeth and central incisor was observed to be between 75.9 to 77.9 months and 80.8 to 84 months respectively. Lateral Incisor teeth was completely erupted among all the study participants aged between 105.2 and 107.4 months of age. The mean age for complete eruption of the first premolar was observed to be between 109.58 to 112.6 months. The mean age for complete eruption of the second pre molar was observed to be between 131.0 to 133.8 months. Complete eruption of Canine and second molar was observed to be between 142.6 to 144.8 months and 174.5 - 178.6 months of age respectively. Conclusion: First Pre Molar, Second Pre Molar, Canine and the second molar appears to be earlier on left side as compared to the left side. The eruption of the second molar tooth was significantly earlier in the female study participants as compared to the male study participants. The dental eruption patterns should be studied in detail to assess the role off various associated factors like nutrition, oral hygiene. [ABSTRACT FROM AUTHOR]

Objective: This study aimed to evaluate the usability of morphometric features obtained from mandibular panoramic radiographs in gender determination using machine learning algorithms. Materials and methods: High-resolution radiographs of 200 patients aged 20–77 (41.0 ± 12.7) were included in the study. Twelve different morphometric measurements were extracted from each digital panoramic radiography included in the study. These measurements were used as features in the machine learning phase in which six different machine learning algorithms were used (k-nearest neighbor, decision trees, support vector machines, naive Bayes, linear discrimination analysis, and neural networks). To evaluate the reliability, we have performed tenfold cross-validation and we repeated this 10 times for every classification process. This process enhances the reliability of the results for other datasets. Results: When all 12 features are used together, the accuracy rate is found to be 82.6 ± 0.5%. The classification accuracies are also compared using each feature alone. Three features that give the highest accuracy are coronoid height (80.9 ± 0.9%), condyle height (78.2 ± 0.5%), and ramus height (77.2 ± 0.4%), respectively. When compared to the classification algorithms, the highest accuracy was obtained with the naive Bayes algorithm with a rate of 84.0 ± 0.4%. Conclusion: Machine learning techniques can accurately determine gender by analyzing mandibular morphometric structures from digital panoramic radiographs. The most precise results are achieved by evaluating the structures in combination, using attributes obtained from applying the MRMR algorithm to all features. [ABSTRACT FROM AUTHOR]

Objectives: To evaluate the feasibility of using the pulp volume (Pv) to total volume (Tv) ratio (Pv:Tv), obtained from cone beam computed tomography (CBCT) scans of single-rooted teeth, for age estimation in a Brazilian population sample. Methods: After obtaining approval from the ethics committee, the study commenced by applying inclusion criteria to screen CBCT scans, resulting in a probability-based sample of participants aged 18 years and older (ranging from 18 to 82 years, with a mean age of 46.44 years). A total of 517 single-rooted teeth, including maxillary central incisors (CI), mandibular canines (C), and mandibular first premolars (FP), were chosen based on excellent agreement values (> 0.9). Pv and Tv measurements were conducted using semi-automatic segmentation with ITK-SNAP 3.8 software. Statistical analysis was performed using Jamovi software, with a significance level set at 5% (α = 0.05). Results: A strong negative correlation (r > −0.7) was observed between chronological age and the Pv:Tv ratio across all examined teeth. However, when conducting regression analysis with Pv:Tv data and chronological age as the independent variable, only the mandibular FP teeth exhibited a normal distribution. The resulting linear model demonstrated moderate predictive value (approximately 64%) in explaining the variance in chronological age, but caution should be exercised when interpreting these findings. Conclusions: The method of measuring individual tooth volume using CBCT to estimate chronological age via Pv:Tv has been demonstrated as effective and reproducible within the Brazilian population sample. [ABSTRACT FROM AUTHOR]

Establishing the identity of a person is important in the field of forensic odontology. This field can be helpful in identifying charred corpses in cases involving intense heat. Bones and body tissues can be extremely damaged due to heat, in such cases dental records have become a reliable source of identification. Dental Identification of charred human remains begins with the examination of dental features such as teeth anatomy, morphology, dental implants, oral health, restorations, fillings, dental anomalies and overall dental structure. These features remain resistant to extreme heat and can thus be compared with that of the ante-mortem records. When the postmortem and ante-mortem records match a successful identification is done. Dental features may also be damaged and become less effective for identification when temperatures rise above a particular range. In order to help with the identification of charred human remains, this research intends to give forensic experts a clear understanding of the circumstances in which dental records can be used by examining the effects of extreme temperature within the 400--800°C range. By gaining insights into this particular range and its effects on dental tissues and records gives forensic experts a chance to solve complex cases involving burned corpses. [ABSTRACT FROM AUTHOR]

Aim: This study aims to determine the accuracy of the Mincer method for estimating dental age (DA) using digital panoramic radiographs (PR) in a Honduran population aged 14–22 years. Materials and Methods: This observational, cross-sectional, retrospective study was applied in a sample of 134 digital PR from a private dental center in Comayagua (72 females and 62 males; mean age 18 ± 3 years). A calibrated observer (kappa ≥0.83) analyzed DA with the Demirjian and Mincer method in all third molars (3M) from stage D (complete crown) to H (apex closure) differentiating by sex. The decimal DA of each individual was calculated from the average of the four 3M. Estimation of chronological age (CA) according to the Mincer method was obtained with linear regression formulas. Results: The results revealed that the mean and standard error of the difference between CA and DA was 0.58 ± 0.13 years (male 0.5 ± 0.19 and female 0.65 ± 0.19). Age groups showed higher overestimation (>1.1) from 14 to 17 years (50%–100%), agreement (±1.1 years) at 18 years (66.7%–70%), and underestimation (<–1.1) from 21 and 22 years (42.9%–100%; P = 0.000). The prediction equations of CA according to DA were statistically significant (P = 0.000) explaining 66.5% of the total sample (error = 1.465), 84.5% in males (error = 1.367), and 79.3% in females (error = 1.548). Conclusion: This study concludes that the Mincer method obtained a reasonable prediction to estimate the age of the majority with improvement in the adjustments with the age estimation formula in a specific population in Comayagua, Honduras. [ABSTRACT FROM AUTHOR]

The purpose of this study was to analyze the volume and area of sphenoid sinuses of Brazilian individuals' cone-beam computed tomography (CBCT) images using the beta version of the DDS-Pro™ 2.14.2_2022 software (DPP Systems, Czestochowa, Poland), to assess a potential correlation to sex, age, skin color, and nutritional status, and to evaluate differences between the right and left sides. Three-dimensional volume and area measurements were made with the software using CBCT images of 113 living Brazilian individuals of both sexes (67 females and 46 males). TEM, rTEM, and R were used to assess the reproducibility of inter- and intra-examiner measurements. The measurement means were estimated with 95% confidence intervals according to sex and age group. There were no significant differences between the left and right sides for both volume and area and between the sexes and black and white individuals. Volume and area were significantly higher in 18 years or older (p < 0.05) and in individuals with normal body mass index (BMI) (p < 0.05). The obtained results do not allow indicating the use of sphenoid sinuses volume and area measurements to estimate sexual dimorphism, and the same occurred for skin color. However, such measures can help to estimate age. Further studies are suggested with a larger sample, especially for the nutritional status variable. [ABSTRACT FROM AUTHOR]

Technological improvements have introduced significant innovations in dentistry and broadened the array of tools and techniques in dental care. One technological development that has been widely researched over the past 20 years is the use of Near-Infrared Transillumination (NIRT) imaging for the diagnosis of dental caries. This paper aims to introduce a comprehensive collection of NIRT images, intended as a reference tool for routine dental examinations, dental research, pedagogical activities, and forensic odontology. The collection presents pairwise clinical and NIRT images categorized as follows: (a) healthy teeth, (b) carious teeth, (c) restored teeth, (d) enamel defects, and (e) diverse findings. This atlas could be a valuable tool for the dental community as it is designed as an identification guide of NIRT illustrated dental features. [ABSTRACT FROM AUTHOR]

Copyright of Revista Foco (Interdisciplinary Studies Journal) is the property of Revista Foco and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Revista Foco (Interdisciplinary Studies Journal) is the property of Revista Foco and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Objective To investigate the age-related changes of the mandibular third molar root pulp visibility in individuals in East China, and to explore the feasibility of applying this method to determine whether an individual is 18 years or older. Methods A total of 1 280 oral panoramic images were collected from the 15-30 years old East China population, and the mandibular third molar root pulp visibility in all oral panoramic images was evaluated using OLZE 0-3 four-stage method, and the age distribution of the samples at each stage was analyzed using descriptive statistics. Results Stages 0, 1, 2 and 3 first appeared in 16.88, 19.18, 21.91 and 25.44 years for males and in 17.47, 20.91, 22.01 and 26.01 years for females. In all samples, individuals at stages 1 to 3 were over 18 years old. Conclusion It is feasible to determine whether an individual in East China is 18 years or older based on the mandibular third molar root pulp visibility on oral panoramic images.

Dental age estimation is a crucial aspect and one of the ways to accomplish forensic age estimation, and imaging technology is an important technique for dental age estimation. In recent years, some studies have preliminarily confirmed the feasibility of magnetic resonance imaging （MRI） in evaluating dental development, providing a new perspective and possibility for the evaluation of dental development, suggesting that MRI is expected to be a safer and more accurate tool for dental age estimation. However, further research is essential to verify its accuracy and feasibility. This article reviews the current state, challenges and limitations of MRI in dental development and age estimation, offering reference for the research of dental age assessment based on MRI technology.

Objective To investigate the application value of combining the Demirjian’s method with machine learning algorithms for dental age estimation in northern Chinese Han children and adolescents. Methods Oral panoramic images of 10 256 Han individuals aged 5 to 24 years in northern China were collected. The development of eight permanent teeth in the left mandibular was classified into different stages using the Demirjian’s method. Various machine learning algorithms, including support vector regression （SVR）, gradient boosting regression （GBR）, linear regression （LR）, random forest regression （RFR）, and decision tree regression （DTR） were employed. Age estimation models were constructed based on total, female, and male samples respectively using these algorithms. The fitting performance of different machine learning algorithms in these three groups was evaluated. Results SVR demonstrated superior estimation efficiency among all machine learning models in both total and female samples, while GBR showed the best performance in male samples. The mean absolute error （MAE） of the optimal age estimation model was 1.246 3, 1.281 8 and 1.153 8 years in the total, female and male samples, respectively. The optimal age estimation model exhibited varying levels of accuracy across different age ranges, which provided relatively accurate age estimations in individuals under 18 years old. Conclusion The machine learning model developed in this study exhibits good age estimation efficiency in northern Chinese Han children and adolescents. However, its performance is not ideal when applied to adult population. To improve the accuracy in age estimation, the other variables can be considered.

Objective To estimate adolescents and children age using stepwise regression and machine learning methods based on the pulp and tooth volumes of the left maxillary central incisor and cuspid on cone beam computed tomography （CBCT） images, and to compare and analyze the estimation results. Methods A total of 498 Shanghai Han adolescents and children CBCT images of the oral and maxillofacial regions were collected. The pulp and tooth volumes of the left maxillary central incisor and cuspid were measured and calculated. Three machine learning algorithms （K-nearest neighbor, ridge regression, and decision tree） and stepwise regression were used to establish four age estimation models. The coefficient of determination, mean error, root mean square error, mean square error and mean absolute error were computed and compared. A correlation heatmap was drawn to visualize and the monotonic relationship between parameters was visually analyzed. Results The K-nearest neighbor model （R2=0.779） and the ridge regression model （R2=0.729） outperformed stepwise regression （R2=0.617）, while the decision tree model （R2=0.494） showed poor fitting. The correlation heatmap demonstrated a monotonically negative correlation between age and the parameters including pulp volume, the ratio of pulp volume to hard tissue volume, and the ratio of pulp volume to tooth volume. Conclusion Pulp volume and pulp volume proportion are closely related to age. The application of CBCT-based machine learning methods can provide more accurate age estimation results, which lays a foundation for further CBCT-based deep learning dental age estimation research.

The potential of intraoral 3D photo scans in forensic odontology identification remains largely unexplored, even though the high degree of detail could allow automated comparison of ante mortem and post mortem dentitions. Differences in soft tissue conditions between ante- and post mortem intraoral 3D photo scans may cause ambiguous variation, burdening the potential automation of the matching process and underlining the need for limiting inclusion of soft tissue in dental comparison. The soft tissue removal must be able to handle dental arches with missing teeth, and intraoral 3D photo scans not originating from plaster models. To address these challenges, we have developed the grid-cutting method. The method is customisable, allowing fine-grained analysis using a small grid size and adaptation of how much of the soft tissues are excluded from the cropped dental scan. When tested on 66 dental scans, the grid-cutting method was able to limit the amount of soft tissue without removing any teeth in 63/66 dental scans. The remaining 3 dental scans had partly erupted third molars (wisdom teeth) which were removed by the grid-cutting method. Overall, the grid-cutting method represents an important step towards automating the matching process in forensic odontology identification using intraoral 3D photo scans. [ABSTRACT FROM AUTHOR]

In age determination, different methods aiming to obtain the closest result to chronological age have been investigated so far. The most commonly used one among these is the radiological method, which is usually used to evaluate the developmental stages of wrist bones or teeth. In our study, we assessed bone age estimations using the Gilsanz–Ratib atlas (GRA), which has recently become commonly used for children aged 9 to 15 years; evaluated the dental age, determined with Cameriere's European method; conducted morphometric measurements of the mandibular bone; and then examined their relationships with chronological age. The results of our study reveal that, in children during the puberty growth spurt, Cameriere's EU formula might have higher accuracy in estimating chronological age in younger age groups, while the GRA might be more accurate for older ages. Additionally, we conclude that of the mandibular morphometric measurements, condylar height and tangential ramus height show strong positive correlations with age. As a result, we conclude that the morphometric measurements evaluated in the present study can be used as auxiliary methods in forensic anthropology and forensic dentistry. [ABSTRACT FROM AUTHOR]

Introduction: The quality of dental medical records is essential for clinical and forensic purposes. However, more is needed to know about the quality of these stories for these purposes in the Colombian context. Objective: To evaluate the quality of dental information in medical records for forensic purposes. Method: A descriptive study was designed to analyze medical records taken during 2022. Results: One-hundred twenty medical records were reviewed, 72% of the odontography was correctly completed, 88% were legible, 75.4% were updated treatments, 56% were completed "satisfactorily," 44% presented deletions and amendments, 8% had updated dental symbols for treatment, and 92% presented inconsistencies. Conclusions: The quality of dental histories for forensic purposes is limited. Analytical studies are needed to study the factors associated with the quality of dental records for forensic purposes. [ABSTRACT FROM AUTHOR]

Purpose Disaster victim identification (DVI) service requires knowledge, confidence, and an attitude (KCA) of readiness. The purpose of this study was to assess allied dental students' perceived KCA regarding DVI skills and topics. Methods A convenience sample of senior dental hygiene students (n=27) and senior dental assistant students (n=14) were recruited by email then presented mismatched simulated antemortem (AM) and postmortem (PM) bitewing radiographs and asked to indicate correct matches. Collectively, participants made 205 radiographic matches and indicated 205 degrees of certainty binarily as "positive" or "possible" (one per match). Participants also completed a researcher designed pretest/posttest electronic survey with seven 3-point Likert-scale items with answer options of "slightly", "moderately", or "extremely" regarding self-perceived knowledge. Statistical analyses were conducted with R software using an α=0.05 significance level. Results A total of n=41 students participated, yielding a response rate of 85.4%. A one-sided linear trend test revealed statistically significant increases of perceived confidence in knowledge from pretest to posttest regarding forensic odontologists' role in DVI (p<0.0001), DVI applications for mass fatality incidents (MFI) (p<0.0001), role of dental radiology in DVI (p<0.0001), and dental morphology applications for DVI (p<0.0001). Participants indicated moderate or extreme confidence in personal clinical skillsets to assist forensic odontologists with DVI. A one-sided Fisher's exact test revealed a statistically significant (p<0.05) positive association between expressed degree of certainty (confidence) and correct radiographic matches. A one-sided linear trend test revealed statistically significant (p<0.0001) improvements in attitude regarding participants' perceived importance for their respective professions to volunteer in DVI. Conclusion Participants of this study reported significant improvements of self-perceived KCA regarding DVI skills and topics. These characteristics may encourage allied dental professionals to pursue further DVI educational opportunities and future service when support is needed for MFI. [ABSTRACT FROM AUTHOR]

(1) Background/Objectives: Accurate determination of chronological age is crucial in legal dental identification. This study aimed to compare the effectiveness of different formulas in estimating the age of a Brazilian subpopulation by analyzing the pulp/tooth ratio of the maxillary canine and mandibular second premolar in panoramic and periapical radiographs. (2) Methods: The sample consisted of panoramic and periapical radiographs of 247 individuals. The file of each radiograph was opened in the Adobe Photoshop CS4® program to outline and obtain values in pixels for calculating the pulp/tooth ratio. Statistical analysis was conducted using the SPSS program, with a significance level set at 5%. (3) Results: The interclass correlation coefficient demonstrated excellent intra-observer agreement (0.990–0.999). The determination coefficients (R2) suggested that only 30–35% of the actual age results could be explained by the pulp/tooth ratio. The smallest differences were observed with Cameriere's formula for the mandibular second premolar on panoramic radiographs (+4.1 years). The greatest differences were found with the formulas for the mandibular second premolar in panoramic radiographs of the Korean (+12.5 years) and Portuguese (−12.1 years) populations. (4) Conclusions: The equations employed showed little agreement between the actual age and the estimated age. [ABSTRACT FROM AUTHOR]

The oral cavity can be explored as an area to identify the impacts of aging. Exfoliative cytology is a painless, rapid, and effective method for collecting intact cells from various epithelial layers for microscopic examination. Therefore, the current study's objective was to determine the average cell size using morphometric analysis and radiovisiography (RVG) to estimate an individual's age utilizing buccal smears and the pulp/tooth ratio. A software program was utilized to determine the cell size using exfoliative cytology, and the pulp and tooth area was measured using RVG of mandibular canine with the help of an image analysis software. Appropriate statistical tests were performed using IBM SPSS statistical software for Windows (version 25). The patient's chronological age, pulp area, and the associated pulp-tooth area ratio values were determined, along with Karl Pearson's correlation coefficient. It was discovered by using a paired t-test to compare chronological age to the age deduced from cell size and pulp-tooth area ratio. According to the current study, age estimation could be done based on average cell size, pulp size, and pulp-tooth area ratio for forensic odontology. Studies with bigger sample sizes and diverse population would help achieve definitive conclusions about the reliability of this particular method. [ABSTRACT FROM AUTHOR]