Search

Abstract Introduction Self‐expanding Y‐metal stents (SEMS) are best suited lesions with involvement of the carina and proximal main bronchi; however, Y‐stents can be difficult to place. These difficulties guided us to develop a modification of the classic technique that addresses some of the challenges during positioning. We present the Y reverse technique for Y stent insertion using a combination of rigid and flexible bronchoscopy. Materials and Methods This retrospective study included 15 consecutive patients, suffering from tracheal‐carina‐lower main bronchi complex, hospitalized at the Thoracic Surgery Unit of the Vanvitelli University of Naples between October 2021 and October 2023. Inclusion criteria: patients in which the length of the stenosis of the right bronchi was greater than that of the left bronchi, advanced oncological conditions, severe respiratory failure; exclusion criteria: Karnofsky scale with

Abstract A 73‐year‐old woman was admitted to our hospital with severe respiratory distress due to postpneumonectomy neoplastic central airway obstruction. An emergency recanalization with rigid bronchoscopy (RB) was planned. Controlled and jet ventilation are routinely used to assure ventilation during RB, but the risk of inadequate oxygenation and removal of carbon dioxide was prohibitively high in this case due to the presence of a single lung. The use of venovenous extracorporeal membrane oxygenation was decided by multidisciplinary team to support ventilation during RB. Complete airway recanalization was successfully achieved without any complications. The patient was discharged 2 days later. Pathology revealed metastatic adenocarcinoma, and the patient was reviewed for oncologic treatment.

Abstract Introduction Benign tracheobronchial stenosis is a abnormal tracheal lumen narrowing that may incur progressive dyspnea and life-threatening hypoxemia. There is no consensus on which patients should be treated with endoscopic or surgical method. This study investigates the outcomes of bronchoscopic dilatation in the treatment of benign tracheal stenosis using a device equipped with a blade to cut the stenotic lesions with dense fibrosis. Materials and methods The procedure was carried out in an operating room under general anesthesia. All patients were intubated with a Rigid Bronchoscope (RB) placed just above the stenosis. Through Rigid Bronchoscopy combined modalities were used as needed: radial incisions of the mucosal stenosis with blade at the levels of 4, 8 and 12 o’clock, with back and forth movements, then the stenotic area was dilated more easily with a rigid bronchoscope. Dilatation was performed by passing the RB of increasing diameter through stenotic areas and then Balloon dilatation of increasing diameter. There were no complications during the procedure. Result We conducted an observational, retrospective, single-centre study in the Thoracic Surgery Unit of the University of ‘Luigi Vanvitelli’ of Naples from November 2011 to September 2021. We included all consecutive patients with benign tracheal stenosis inoperable. During the study period, 113 patients were referred to our department with benign tracheal stenosis inoperable. 61 patients were treated with the blade. During the follow-up, a recurrence of the stenosis was observed in 8 patients in the first month and in 4 patients in the third month. Instead in the patients treated with the use of laser (52 patients), during the follow-up a recurrence was observed in 16 patients in the first month and in 6 patients in the third month; no patient relapsed after 6 months and after 1 year. Long term successful bronchoscopic management with blade was attained by 99% in simple and 93% in mixed stenosis and in complex type stenosis. Conclusion Our study underlines the importance of the use of the blade in bronchoscopic treatment as a valid conservative approach in the management of patients with inoperable benign tracheal stenosis as an alternative to the use of the laser, reducing the abnormal inflammatory reaction in order to limit recurrences.

Abstract Background The localization of lung nodules is challenging during thoracoscopy. In this study, we evaluated the use of three‐dimensional (3D) lung reconstruction for use in the operating room to guide the identification of lung nodules during thoracoscopy. Methods This was a single‐center retrospective study. All consecutive patients undergoing thoracoscopic resection of lung nodules were included in the study. Patients were retrospectively divided into two groups based upon whether the thoracoscopic resection was performed with the assistance (3D group) or not (standard group) of 3D lung reconstruction. The operative time (minutes) to detect lung nodules was statistically compared between the two study groups in relation to the characteristics of lung nodules as size, localization, and distance from the visceral pleura. Results Our study population consisted of 170 patients: 85 in the 3D group and 85 in the standard group. No intergroup difference differences were found regarding the characteristics and histological diagnosis of lesions. The standard group compared to the 3D group was associated with a significantly longer operative time for the detection of lesions

Abstract Background Video‐assisted thoracoscopic surgery (VATS) resection of deep‐seated lung nodules smaller than 1 cm is extremely challenging. Several methods have been proposed to overcome this limitation but with not neglectable complications. Intraoperative lung ultrasound (ILU) is the latest minimally invasive proposed technique. The aim of the current study was to analyze the accuracy and efficacy of ILU associated with VATS to visualize solitary and deep‐seated pulmonary nodules smaller than 1 cm. Methods Patients with subcentimetric solitary and deep‐seated pulmonary nodules were included in this retrospective study from November 2020 to December 2022. Patients who received VATS aided with ILU were considered as group A and patients who received conventional VATS as group B (control group). The rate of nodule identification and the time for localization with VATS alone and with VATS aided with ILU in each group were analyzed. Results A total of 43 patients received VATS aided with ILU (group A) and 31 patients received conventional VATS (group B). Mean operative time was lower in group A (p

Abstract Background Intrathoracic neurogenic tumors (INTs) are derived from nerve tissue and grow within the chest. Preoperative diagnosis can be challenging and only complete surgical exeresis enables confirmation of the suspected diagnosis. Here, we analyzed our experience on management of paravertebral lesions with solid and cystic patterns. Methods A monocentric retrospective study was conducted, which included 25 consecutive cases of ITNs in the period from 2010 to 2022. These cases had been surgically treated by thoracoscopic resection alone, or in combination with neurosurgery in the case of dumbbell tumors. The demographic and operative data along with complications were recorded and analyzed. Results Twenty‐five patients were diagnosed with a paravertebral lesion of which 19 (76%) had solid features and six (24%) had cystic features. The most common diagnosis was schwannoma (72%), followed by neurofibroma (20%) and malignant schwannoma (8%). In four cases (12%) the tumor showed an intraspinal extension. None of the patients had recurrence until 6 months of follow‐up. Comparison between the VATS and thoracotomy procedures showed that outcome of discharge on the postoperative day, on average, was 2.61 ± 0.5 versus 3.51 ± 0.53, respectively (p‐value

Abstract Background Persistent air leak (PAL) is a common complication after video‐assisted thoracoscopic surgery (VATS) lobectomy. We aimed to evaluate whether the intraoperative quantitative measurement of air leaks using a mechanical ventilation test could predict PAL and identify those patients needing additional treatment for the prevention of PAL. Methods This was an observational, retrospective, single‐center study that included 82 patients who underwent VATS lobectomy with a mechanical ventilation test for VL. Only 2% of patients who underwent lobectomy surgery had persistent air leaks. Results At the end of lobectomy performed in patients with non‐small cell lung cancer, the lung was reinflated at a 25–30 mmH2O pressure and ventilatory leaks (VL) were calculated and in relation to the entity of the air leaks, we evaluated the most suitable intraoperative treatment to prevent persistent air leaks. Conclusion VL is an independent predictor of PAL after VATS lobectomy; it provides a real‐time intraoperative guidance to identify those patients who can benefit from additional intraoperative preventive interventions to reduce PAL.

Abstract Complex persistent air leak (PAL) is a clinical condition which is difficult to treat. Herein, we report the clinical case of an 18‐year‐old woman with lung and bone metastases due an ultrarare sarcoma: “round cell sarcoma non‐Ewing”. She developed persistent air leaks due to an alveolopleural fistula which developed following two cycles of chemotherapy with doxorubicin. Chest drainage with suction failed to resolve the air leaks, while surgical treatment was unfeasible due to the poor clinical condition of the patient. Thus, she was reviewed for endoscopic treatment with one‐way endobronchial valves. A small valve was sequentially inserted within each segment of the right upper bronchus to occlude the entire upper lobe. Two days after the procedure, resolution of the air leaks were obtained. Chest drainage was removed 5 days later and the patient was discharged. Chemotherapy was resumed. The patient died 7 months later because of disease progression.

Abstract Introduction Staging of the mediastinum lymph nodes involvement in patients with non–small cell lung cancer (NSCLC) is an important prognostic factor determining the most appropriate multimodality treatment plan. The objective of this study is to assess ultrasound characteristics of mediastinal lymph nodes metastasis and effectiveness of intraoperative ultrasound‐guided mediastinal nodal dissection in patients with resected NSCLC. Materials and Methods All patients undergoing video‐assisted thoracoscopic surgery lobectomy and pulmonary lymphadenectomy from November 2020 to March 2022 at the thoracic surgery department of the Vanvitelli University of Naples underwent intraoperative ultrasound‐guided mediastinal lymph nodal dissection. Results This study evaluates whether individual B‐mode features and a compounding thereof can be used to accurately and reproducibly predict lymph node malignancy. Discussion Intraoperative ultrasound, during systematic mediastinal lymph node dissection, is helpful in preventing lesion to mediastinal structures. Pathological nodal sonographic characteristics are round shape, short‐axis diameter, echogenicity, margin, the absence or presence of coagulation necrosis sign, and the absence or presence of central hilar structure, increased color Doppler flow, the absence or presence of calcification, and nodal conglomeration. Operating time was not substantially prolonged. The procedure is simple, safe and highly accurate. Conclusions Ultrasonic techniques allow surgeons to detect the relationship between lymph nodes and surrounding large blood vessels during biopsy, improving the safety and simplicity of the operation, increasing the number of harvested lymph nodes, and reducing the risk of intraoperative injury; it is a fast, easily reproducible, and inexpensive method.

Introduction: In chest wall reconstruction, the main objectives are the restoration of the chest wall integrity, function, and aesthetic, which is often achieved with the placement of implants. We aimed to evaluate whether 3D printed models can be useful for preoperative planning and surgical treatment in chest wall reconstruction to improve the outcome of the surgery and to reduce the rate of complications. Methods: We conducted a systematic review of literature using PubMed, Scopus, Embase, and Google Scholar databases until 8 November 2021 with the following keywords: (“3D printing” or “rapid prototyping” or “three-dimensional printing” or “bioprinting”) and (“chest wall” or “rib” or “sternum” or “ribcage” or “pectus excavatum”). Results were then manually screened by two independent authors to select studies relevant to 3D printing application in chest wall reconstruction. The primary outcome was morphological correction, and secondary outcomes were changes in operating time and procedure-related complication rate. Results: Eight articles were included in our review. Four studies were related to pectus excavatum correction, two studies were related to rib fracture stabilization, and two studies were related to chest wall tumor resection and reconstruction. Seven studies reported 3D printing of a thorax model or template implants for preoperative planning and implant modeling, and one study reported 3D printing of a PEEK prosthesis for direct implantation. Four studies reported comparison with a conventionally treated control group, and three of them detected a shorter operative time in the 3D printing model-assisted group. Satisfactory morphological correction was reported in all studies, and six studies reported a good implant fitting with minimal need for intraoperative adjustments. There were no major intraoperative or postoperative complications in any of the studies. Conclusions: The use of 3D printing models in chest wall reconstruction seems to be helpful for the production of personalized implants, reducing intraoperative adjustments. Results of morphological correction and postoperative recovery after the 3D printing-assisted surgery were satisfactory in all studies with a low rate of complication. Our literature review suggests good results regarding prosthesis fitting, accuracy of surgical planning, and reduction in operative time in 3D printing-assisted procedures, although more evidence is needed to prove this observation.

Mycobacterium avium subsp. paratuberculosis (MAP) is the etiological agent of Johne’s disease in ruminants. Recent studies have linked MAP to type 1 diabetes (T1D) in the Sardinian population. The aim of this study was to investigate the prevalence of MAP infection in a T1D cohort from continental Italy compared with healthy control subjects. 247 T1D subjects and 110 healthy controls were tested for the presence of MAP. MAP DNA was detected using IS900-specific polymerase chain reaction (PCR). The presence of antibodies towards a MAP antigen, heparin binding hemoagglutinin (HBHA), was detected by ELISA. We demonstrated a higher MAP DNA prevalence in plasma samples from T1D patients and a stronger immune response towards MAP HBHA, compared with healthy control subjects. Moreover, in the recent onset patients, we observed an association between anti-MAP antibodies and HLA DQ2 (DQA1 0201/DQB1 0202). These findings taken together support the hypothesis of MAP as an environmental risk factor for the development of T1D in genetically predisposed subjects, probably involving a mechanism of molecular mimicry between MAP antigens and pancreatic islet β-cells.