Search

Abstract Understanding the psychophysiological state during robot-aided rehabilitation is crucial for assessing the patient experience during treatments. This paper introduces a psychophysiological estimation approach using a Fuzzy Logic inference model to assess patients’ perception of robots during upper-limb robot-aided rehabilitation sessions. The patients were asked to perform nine cycles of 3D point-to-point trajectories toward different targets at varying heights with the assistance of an anthropomorphic robotic arm (i.e. KUKA LWR 4+). Physiological parameters, including galvanic skin response, heart rate, and respiration rate, were monitored across ten out of forty daily sessions. This data enabled the construction of an inference model to estimate patients’ perception states. Results expressed in terms of correlation coefficients between the patient state and the increasing number of sessions. Correlation coefficients showed statistically significant strong associations: a state of heightened engagement (formerly described as “Excited”) had $$\rho = -0.73$$ ρ = - 0.73 (p-value=0.01), and a more calm and resting state (namely “Relaxed” state) had $$\rho = 0.70$$ ρ = 0.70 (p-value=0.02) with the number of sessions completed. All patients had positive interaction with the robot, initially expressing curiosity and interest that gradually shifted to a more “Relaxed” state over time.

In the Industry 4.0 scenario, human–robot collaboration (HRC) plays a key role in factories to reduce costs, increase production, and help aged and/or sick workers maintain their job. The approaches of the ISO 11228 series commonly used for biomechanical risk assessments cannot be applied in Industry 4.0, as they do not involve interactions between workers and HRC technologies. The use of wearable sensor networks and software for biomechanical risk assessments could help us develop a more reliable idea about the effectiveness of collaborative robots (coBots) in reducing the biomechanical load for workers. The aim of the present study was to investigate some biomechanical parameters with the 3D Static Strength Prediction Program (3DSSPP) software v.7.1.3, on workers executing a practical manual material-handling task, by comparing a dual-arm coBot-assisted scenario with a no-coBot scenario. In this study, we calculated the mean and the standard deviation (SD) values from eleven participants for some 3DSSPP parameters. We considered the following parameters: the percentage of maximum voluntary contraction (%MVC), the maximum allowed static exertion time (MaxST), the low-back spine compression forces at the L4/L5 level (L4Ort), and the strength percent capable value (SPC). The advantages of introducing the coBot, according to our statistics, concerned trunk flexion (SPC from 85.8% without coBot to 95.2%; %MVC from 63.5% without coBot to 43.4%; MaxST from 33.9 s without coBot to 86.2 s), left shoulder abdo-adduction (%MVC from 46.1% without coBot to 32.6%; MaxST from 32.7 s without coBot to 65 s), and right shoulder abdo-adduction (%MVC from 43.9% without coBot to 30.0%; MaxST from 37.2 s without coBot to 70.7 s) in Phase 1, and right shoulder humeral rotation (%MVC from 68.4% without coBot to 7.4%; MaxST from 873.0 s without coBot to 125.2 s), right shoulder abdo-adduction (%MVC from 31.0% without coBot to 18.3%; MaxST from 60.3 s without coBot to 183.6 s), and right wrist flexion/extension rotation (%MVC from 50.2% without coBot to 3.0%; MaxST from 58.8 s without coBot to 1200.0 s) in Phase 2. Moreover, Phase 3, which consisted of another manual handling task, would be removed by using a coBot. In summary, using a coBot in this industrial scenario would reduce the biomechanical risk for workers, particularly for the trunk, both shoulders, and the right wrist. Finally, the 3DSSPP software could be an easy, fast, and costless tool for biomechanical risk assessments in an Industry 4.0 scenario where ISO 11228 series cannot be applied; it could be used by occupational medicine physicians and health and safety technicians, and could also help employers to justify a long-term investment.

Abstract The characterization of both limbs’ behaviour in prosthetic gait is of key importance for improving the prosthetic components and increasing the biomechanical capability of trans-femoral amputees. When characterizing human gait, modular motor control theories have been proven to be powerful in providing a compact description of the gait patterns. In this paper, the planar covariation law of lower limb elevation angles is proposed as a compact, modular description of prosthetic gait; this model is exploited for a comparison between trans-femoral amputees walking with different prosthetic knees and control subjects walking at different speeds. Results show how the planar covariation law is maintained in prostheses users, with a similar spatial organization and few temporal differences. Most of the differences among the different prosthetic knees are found in the kinematic coordination patterns of the sound side. Moreover, different geometrical parameters have been calculated over the common projected plane, and their correlation with classical gait spatiotemporal and stability parameters has been investigated. The results from this latter analysis have highlighted a correlation with several parameters of gait, suggesting that this compact description of kinematics unravels a significant biomechanical meaning. These results can be exploited to guide the control mechanisms of prosthetic devices based purely on the measurement of relevant kinematic quantities.

Physical therapy keeps exploiting more and more the capabilities of the robot of adapting the treatments to patients’ needs. This paper aims at presenting a psychophysiological-aware control strategy for upper limb robot-aided orthopedic rehabilitation. The main features are the capability of i) generating point-to-point trajectories inside an adaptable workspace, ii) providing assistance in guiding the patients’ limbs in accomplishing the assigned task allowing them to freely move with a certain degree of spatial and temporal autonomy and iii) tuning the control parameters according to the patients’ kinematics performance and psychophysiological state. The implemented control strategy is validated in a real clinical setting on eight orthopedic patients undergoing twenty daily robot-aided rehabilitation sessions. The psychophysiological-aware control strategy evidenced a positive impact on the enrolled participants since they are effectively conducted in a calmer condition with respect to the patients who did not receive the psychophysiological adaptation. Moreover, clinical performance indicators suggest that the proposed tailored control strategy improves motor functions.

The central nervous system (CNS) controls movements and regulates joint stiffness with muscle co-activation, but until now, few studies have examined muscle pairs during running. This study aims to investigate differences in lower limb muscle coactivation during gait at different speeds, from walking to running. Nineteen healthy runners walked and ran at speeds ranging from 0.8 km/h to 9.3 km/h. Twelve lower limb muscles’ co-activation was calculated using the time-varying multi-muscle co-activation function (TMCf) with global, flexor–extension, and rostro–caudal approaches. Spatiotemporal and kinematic parameters were also measured. We found that TMCf, spatiotemporal, and kinematic parameters were significantly affected by gait speed for all approaches. Significant differences were observed in the main parameters of each co-activation approach and in the spatiotemporal and kinematic parameters at the transition between walking and running. In particular, significant differences were observed in the global co-activation (CIglob, main effect F(1,17) = 641.04, p < 0.001; at the transition p < 0.001), the stride length (main effect F(1,17) = 253.03, p < 0.001; at the transition p < 0.001), the stride frequency (main effect F(1,17) = 714.22, p < 0.001; at the transition p < 0.001) and the Center of Mass displacement in the vertical (CoMy, main effect F(1,17) = 426.2, p < 0.001; at the transition p < 0.001) and medial–lateral (CoMz, main effect F(1,17) = 120.29 p < 0.001; at the transition p < 0.001) directions. Regarding the correlation analysis, the CoMy was positively correlated with a higher CIglob (r = 0.88, p < 0.001) and negatively correlated with Full Width at Half Maximum (FWHMglob, r = −0.83, p < 0.001), whereas the CoMz was positively correlated with the global Center of Activity (CoAglob, r = 0.97, p < 0.001). Positive and negative strong correlations were found between global co-activation parameters and center of mass displacements, as well as some spatiotemporal parameters, regardless of gait speed. Our findings suggest that walking and running have different co-activation patterns and kinematic characteristics, with the whole-limb stiffness exerted more synchronously and stably during running. The co-activation indexes and kinematic parameters could be the result of global co-activation, which is a sensory-control integration process used by the CNS to deal with more demanding and potentially unstable tasks like running.

Individuals of working age affected by neuromuscular disorders frequently experience issues with their capacity to get employment, difficulty at work, and premature work interruption. Anyway, individuals with a disability could be able to return to work, thanks to targeted rehabilitation as well as ergonomic and training interventions. Biomechanical and physiological indexes are important for evaluating motor and muscle performance and determining the success of job integration initiatives. Therefore, it is necessary to determinate which indexes from the literature are the most appropriate to evaluate the effectiveness and efficiency of the return-to-work programs. To identify current and future valuable indexes, this study uses a systematic literature review methodology for selecting articles published from 2011 to March 30, 2021 from Scopus, Web of Science, and PubMed and for checking the eligibility and the potential bias risks. The most used indexes for motor performance assessment were identified, categorized, and analyzed. This review revealed a great potential for kinetic, kinematic, surface electromyography, postural, and other biomechanical and physiological indexes to be used for job integration/reintegration. Indeed, wearable miniaturized sensors, kinematic, kinetic, and sEMG-based indexes can be used to control collaborative robots, classify residual motor functions, and assess pre–post-rehabilitation and ergonomic therapies.

Prosthetic gait implies the use of compensatory motor strategies, including alterations in gait biomechanics and adaptations in the neural control mechanisms adopted by the central nervous system. Despite the constant technological advancements in prostheses design that led to a reduction in compensatory movements and an increased acceptance by the users, a deep comprehension of the numerous factors that influence prosthetic gait is still needed. The quantitative prosthetic gait analysis is an essential step in the development of new and ergonomic devices and to optimize the rehabilitation therapies. Nevertheless, the assessment of prosthetic gait is still carried out by a heterogeneous variety of methodologies, and this limits the comparison of results from different studies, complicating the definition of shared and well-accepted guidelines among clinicians, therapists, physicians, and engineers. This perspective article starts from the results of a project funded by the Italian Worker's Compensation Authority (INAIL) that led to the generation of an extended dataset of measurements involving kinematic, kinetic, and electrophysiological recordings in subjects with different types of amputation and prosthetic components. By encompassing different studies published along the project activities, we discuss the specific information that can be extracted by different kinds of measurements, and we here provide a methodological perspective related to multimodal prosthetic gait assessment, highlighting how, for designing improved prostheses and more effective therapies for patients, it is of critical importance to analyze movement neural control and its mechanical actuation as a whole, without limiting the focus to one specific aspect.

Lifting tasks, among manual material handling activities, are those mainly associated with low back pain. In recent years, several instrumental-based tools were developed to quantitatively assess the biomechanical risk during lifting activities. In this study, parameters related to balance and extracted from the Centre of Pressure (CoP) data series are studied in fatiguing frequency-dependent lifting activities to: i) explore the possibility of classifying people with LBP and asymptomatic people during the execution of task; ii) examine the assessment of the risk levels associated with repetitive lifting activities, iii) enhance current understanding of postural control strategies during lifting tasks. Data were recorded from 14 asymptomatic participants and 7 participants with low back pain. The participants performed lifting tasks in three different lifting conditions (with increasing lifting frequency and risk levels) and kinetic and surface electromyography (sEMG) data were acquired. Kinetic data were used to calculated the CoP and parameters extracted from the latter show a discriminant capacity for the groups and the risk levels. Furthermore, sEMG parameters show a trend compatible with myoelectric manifestations of muscular fatigue. Correlation results between sEMG and CoP velocity parameters revealed a positive correlation between amplitude sEMG parameters and CoP velocity in both groups and a negative correlation between frequency sEMG parameters and CoP velocity. The current findings suggest that it is possible to quantitatively assess the risk level when monitoring fatiguing lifting tasks by using CoP parameters as well as identify different motor strategies between people with and without LBP.

Biomechanical overload is considered a significant occupational risk in manufacturing and a potential cause of musculoskeletal disorders. This research aims to introduce new methodologies for the quantitative risk evaluation of biomechanical risk by combining surface electromyography with a motion acquisition system based on inertial measurement units. Due to the lack of experimental data in the literature acquired in a real industrial environment during the working shift, an on-the-field study regarding an automotive assembly line workstation has been carried out in collaboration with Fiat Chrysler Automobiles Italy S.p.A. Data related to the trunk flexion forward and the erector spinae muscle activity have been acquired for several consecutive working cycles by considering three different workers. Data analyses indicated kinematic and muscular activity patterns consistent with those expected and that the proposed wearable technologies can be integrated and used simultaneously during work activities. Furthermore, the results demonstrated data repeatability, strengthening the feasibility and usefulness of the combined use of kinematic and electromyography technologies to assess biomechanical overload in production lines. This study could lay the bases for the future definition of a method for assessing biomechanical overload due to awkward postures.

Background: Balance impairment is a common disability in post-stroke survivors, leading to reduced mobility and increased fall risk. Robotic gait training (RAGT) is largely used, along with traditional training. There is, however, no strong evidence about RAGT superiority, especially on balance. This study aims to determine RAGT efficacy on balance of post-stroke survivors. Methods: PubMed, Cochrane Library, and PeDRO databases were investigated. Randomized clinical trials evaluating RAGT efficacy on post-stroke survivor balance with Berg Balance Scale (BBS) or Timed Up and Go test (TUG) were searched. Meta-regression analyses were performed, considering weekly sessions, single-session duration, and robotic device used. Results: A total of 18 trials have been included. BBS pre-post treatment mean difference is higher in RAGT-treated patients, with a pMD of 2.17 (95% CI 0.79; 3.55). TUG pre-post mean difference is in favor of RAGT, but not statistically, with a pMD of −0.62 (95%CI − 3.66; 2.43). Meta-regression analyses showed no relevant association, except for TUG and treatment duration (β = −1.019, 95% CI − 1.827; −0.210, p-value = 0.0135). Conclusions: RAGT efficacy is equal to traditional therapy, while the combination of the two seems to lead to better outcomes than each individually performed. Robot-assisted balance training should be the focus of experimentation in the following years, given the great results in the first available trials. Given the massive heterogeneity of included patients, trials with more strict inclusion criteria (especially time from stroke) must be performed to finally define if and when RAGT is superior to traditional therapy.

Abstract Background The above-knee amputation of a lower limb is a severe impairment that affects significantly the ability to walk; considering this, a complex adaptation strategy at the neuromuscular level is needed in order to be able to move safely with a prosthetic knee. In literature, it has been demonstrated that muscle activity during walking can be described via the activation of a small set of muscle synergies. The analysis of the composition and the time activation profiles of such synergies have been found to be a valid tool for the description of the motor control schemes in pathological subjects. Methods In this study, we used muscle synergy analysis techniques to characterize the differences in the modular motor control schemes between a population of 14 people with trans-femoral amputation and 12 healthy subjects walking at two different (slow and normal self-selected) speeds. Muscle synergies were extracted from a 12 lower-limb muscles sEMG recording via non-negative matrix factorization. Equivalence of the synergy vectors was quantified by a cross-validation procedure, while differences in terms of time activation coefficients were evaluated through the analysis of the activity in the different gait sub-phases. Results Four synergies were able to reconstruct the muscle activity in all subjects. The spatial component of the synergy vectors did not change in all the analysed populations, while differences were present in the activity during the sound limb’s stance phase. Main features of people with trans-femoral amputation’s muscle synergy recruitment are a prolonged activation of the module composed of calf muscles and an additional activity of the hamstrings’ module before and after the prosthetic heel strike. Conclusions Synergy-based results highlight how, although the complexity and the spatial organization of motor control schemes are the same found in healthy subjects, substantial differences are present in the synergies’ recruitment of people with trans femoral amputation. In particular, the most critical task during the gait cycle is the weight transfer from the sound limb to the prosthetic one. Future studies will integrate these results with the dynamics of movement, aiming to a complete neuro-mechanical characterization of people with trans-femoral amputation’s walking strategies that can be used to improve the rehabilitation therapies.

IntroductionGait deficits are debilitating in people with Parkinson's disease (PwPD), which inevitably deteriorate over time. Gait analysis is a valuable method to assess disease-specific gait patterns and their relationship with the clinical features and progression of the disease.ObjectivesOur study aimed to i) develop an automated diagnostic algorithm based on machine-learning techniques (artificial neural networks [ANNs]) to classify the gait deficits of PwPD according to disease progression in the Hoehn and Yahr (H-Y) staging system, and ii) identify a minimum set of gait classifiers.MethodsWe evaluated 76 PwPD (H-Y stage 1-4) and 67 healthy controls (HCs) by computerized gait analysis. We computed the time-distance parameters and the ranges of angular motion (RoMs) of the hip, knee, ankle, trunk, and pelvis. Principal component analysis was used to define a subset of features including all gait variables. An ANN approach was used to identify gait deficits according to the H-Y stage.ResultsWe identified a combination of a small number of features that distinguished PwPDs from HCs (one combination of two features: knee and trunk rotation RoMs) and identified the gait patterns between different H-Y stages (two combinations of four features: walking speed and hip, knee, and ankle RoMs; walking speed and hip, knee, and trunk rotation RoMs).ConclusionThe ANN approach enabled automated diagnosis of gait deficits in several symptomatic stages of Parkinson's disease. These results will inspire future studies to test the utility of gait classifiers for the evaluation of treatments that could modify disease progression.

Patients affected by neurological pathologies with motor disorders when they are of working age have to cope with problems related to employability, difficulties in working, and premature work interruption. It has been demonstrated that suitable job accommodation plans play a beneficial role in the overall quality of life of pathological subjects. A well-designed return-to-work program should consider several recent innovations in the clinical and ergonomic fields. One of the instrument-based methods used to monitor the effectiveness of ergonomic interventions is surface electromyography (sEMG), a multi-channel, non-invasive, wireless, wearable tool, which allows in-depth analysis of motor coordination mechanisms. Although the scientific literature in this field is extensive, its use remains significantly underexploited and the state-of-the-art technology lags expectations. This is mainly attributable to technical and methodological (electrode-skin impedance, noise, electrode location, size, configuration and distance, presence of crosstalk signals, comfort issues, selection of appropriate sensor setup, sEMG amplitude normalization, definition of correct sEMG-related outcomes and normative data) and cultural limitations. The technical and methodological problems are being resolved or minimized also thanks to the possibility of using reference books and tutorials. Cultural limitations are identified in the traditional use of qualitative approaches at the expense of quantitative measurement-based monitoring methods to design and assess ergonomic interventions and train operators. To bridge the gap between the return-to-work rehabilitation and other disciplines, several teaching courses, accompanied by further electrodes and instrumentations development, should be designed at all Bachelor, Master and PhD of Science levels to enhance the best skills available among physiotherapists, occupational health and safety technicians and ergonomists.

Lifting tasks are manual material-handling activities and are commonly associated with work-related low back disorders. Instrument-based assessment tools are used to quantitatively assess the biomechanical risk associated with lifting activities. This study aims at highlighting different motor strategies in people with and without low back pain (LBP) during fatiguing frequency-dependent lifting tasks by using parameters of muscle coactivation. A total of 15 healthy controls (HC) and eight people with LBP performed three lifting tasks with a progressively increasing lifting index (LI), each lasting 15 min. Bilaterally erector spinae longissimus (ESL) activity and rectus abdominis superior (RAS) were recorded using bipolar surface electromyography systems (sEMG), and the time-varying multi-muscle coactivation function (TMCf) was computed. The TMCf can significantly discriminate each pair of LI and it is higher in LBP than HC. Collectively, our findings suggest that it is possible to identify different motor strategies between people with and without LBP. The main finding shows that LBP, to counteract pain, coactivates the trunk muscles more than HC, thereby adopting a strategy that is stiffer and more fatiguing.

In the last two decades, a growing interest has been focused on gait and balance robot-assisted rehabilitation in children with neurological disabilities. Robotic devices allow the implementation of intensive, task-specific training fostering functional recovery and neuroplasticity phenomena. However, limited attention has been paid to the protocols used in this research framework. This systematic review aims to provide an overview of the existing literature on robotic systems for the rehabilitation of gait and balance in children with neurological disabilities and their rehabilitation applications. The literature search was carried out independently and synchronously by three authors on the following databases: MEDLINE, Cochrane Library, PeDro, Institute of Electrical and Electronics Engineers, ScienceDirect, and Google Scholar. The data collected included three subsections referring to clinical, technical, and regulatory aspects. Thirty-one articles out of 81 found on the primary literature search were included in the systematic review. Most studies involved children with cerebral palsy. Only one-third of the studies were randomized controlled trials. Overall, 17 devices (nine end-effector systems and eight exoskeletons) were investigated, among which only 4 (24%) were bore the CE mark. Studies differ on rehabilitation protocols duration, intensity, and outcome measures. Future research should improve both rehabilitation protocols’ and devices’ descriptions.

The upper extremities limitation represents one of the essential functional impairments in patients with cervical spinal cord injury. Electromechanics assisted devices and robots are increasingly used in neurorehabilitation to help functional improvement in patients with neurological diseases. This review aimed to systematically report the evidence-based, state-of-art on clinical applications and robotic-assisted arm training (RAT) in motor and functional recovery in subjects affected by cervical spinal cord injury. The present study has been carried out within the framework of the Italian Consensus Conference on “Rehabilitation assisted by robotic and electromechanical devices for persons with disability of neurological origin” (CICERONE). PubMed/MEDLINE, Cochrane Library, and Physiotherapy Evidence Database (PEDro) databases were systematically searched from inception to September 2021. The 10-item PEDro scale assessed the study quality for the RCT and the AMSTAR-2 for the systematic review. Two different authors rated the studies included in this review. If consensus was not achieved after discussion, a third reviewer was interrogated. The five-item Oxford CEBM scale was used to rate the level of evidence. A total of 11 studies were included. The selected studies were: two systematic reviews, two RCTs, one parallel-group controlled trial, one longitudinal intervention study and five case series. One RCT was scored as a high-quality study, while the systematic review was of low quality. RAT was reported as feasible and safe. Initial positive effects of RAT were found for arm function and quality of movement in addition to conventional therapy. The high clinical heterogeneity of treatment programs and the variety of robot devices could severely affect the generalizability of the study results. Therefore, future studies are warranted to standardize the type of intervention and evaluate the role of robotic-assisted training in subjects affected by cervical spinal cord injury.

Upper extremities limitation is a common functional impairment in patients with Multiple Sclerosis (PwMS). Novel technological devices are increasingly used in neurorehabilitation to support motor function improvement and the quantitative assessment of motor performance during training in patients with neurological diseases. In this review, we systematically report the evidence on clinical applications and robotic-assisted arm training (RAT) in functional recovery in PwMS. PubMed/MEDLINE, the Cochrane Library, and the Physiotherapy Evidence Database (PEDro) databases were systematically searched from inception to March 2021. The 10-item PEDro scale assessed the study quality for the RCT, and the AMSTAR-2 was used to assess the quality of the systematic review. The 5-item Oxford CEBM scale was used to rate the level of evidence. A total of 10 studies (161 subjects) were included. The selected studies included one systematic review, four RCTs, one randomized crossover, and four case series. The RCTs were scored as high-quality studies, while the systematic review was determined to be of low quality. Shoulder range of motion, handgrip strength, and proximal arm impairment improved after RAT. Manual dexterity, arm function, and use in daily life also ameliorated arm function. The high clinical heterogeneity of treatment programs and the variety of robot devices affects the generalizability of the study results; therefore, we emphasize the need to standardize the intervention type in future studies that evaluate the role of robotic-assisted training in PwMS. Robot-assisted treatment seems safe and useful to increase manual dexterity and the quality of movement execution in PwMS with moderate to severe disability. Additional studies with an adequate sample size and methodological rigour are warranted to drive definite conclusions.

Due to the epochal changes introduced by “Industry 4.0”, it is getting harder to apply the varying approaches for biomechanical risk assessment of manual handling tasks used to prevent work-related musculoskeletal disorders (WMDs) considered within the International Standards for ergonomics. In fact, the innovative human–robot collaboration (HRC) systems are widening the number of work motor tasks that cannot be assessed. On the other hand, new sensor-based tools for biomechanical risk assessment could be used for both quantitative “direct instrumental evaluations” and “rating of standard methods”, allowing certain improvements over traditional methods. In this light, this Letter aims at detecting the need for revising the standards for human ergonomics and biomechanical risk assessment by analyzing the WMDs prevalence and incidence; additionally, the strengths and weaknesses of traditional methods listed within the International Standards for manual handling activities and the next challenges needed for their revision are considered. As a representative example, the discussion is referred to the lifting of heavy loads where the revision should include the use of sensor-based tools for biomechanical risk assessment during lifting performed with the use of exoskeletons, by more than one person (team lifting) and when the traditional methods cannot be applied. The wearability of sensing and feedback sensors in addition to human augmentation technologies allows for increasing workers’ awareness about possible risks and enhance the effectiveness and safety during the execution of in many manual handling activities.

The aim of this study was to analyze the effect of the level of amputation and various prosthetic devices on the muscle activation of the sound limb in people with unilateral transfemoral and transtibial amputation. We calculated the global coactivation of 12 muscles using the time-varying multimuscle coactivation function method in 37 subjects with unilateral transfemoral amputation (10, 16, and 11 with mechanical, electronic, and bionic prostheses, respectively), 11 subjects with transtibial amputation, and 22 healthy subjects representing the control group. The results highlighted that people with amputation had a global coactivation temporal profile similar to that of healthy subjects. However, amputation increased the level of the simultaneous activation of many muscles during the loading response and push-off phases of the gait cycle and decreased it in the midstance and swing subphases. This increased coactivation probably plays a role in prosthetic gait asymmetry and energy consumption. Furthermore, people with amputation and wearing electronic prosthesis showed lower global coactivation when compared with people wearing mechanical and bionic prostheses. These findings suggest that the global lower limb coactivation behavior can be a useful tool to analyze the motor control strategies adopted and the ability to adapt to the prosthetic device.

Work-related low-back disorders (WLBDs) can be caused by manual lifting tasks. Wearable devices used to monitor these tasks can be one possible way to assess the main risk factors for WLBDs. This study aims at analyzing the sensitivity of kinematic data to the risk level changes, and to define an instrument-based tool for risk classification by using kinematic data and artificial neural networks (ANNs). Twenty workers performed lifting tasks, designed by following the rules of the revised NIOSH lifting equation, with an increasing lifting index (LI). From the acquired kinematic data, we computed smoothness parameters together with kinetic, potential and mechanical energy. We used ANNs for mapping different set of features on LI levels to obtain an automatic risk estimation during these tasks. The results show that most of the calculated kinematic indexes are significantly affected by changes in LI and that all the lifting condition pairs can be correctly distinguished. Furthermore, using specific set of features, different topologies of ANNs can lead to a reliable classification of the biomechanical risk related to lifting tasks. In particular, the training sets and numbers of neurons in each hidden layer influence the ANNs performance, which is instead independent from the numbers of hidden layers. Reliable biomechanical risk estimation can be obtained by using training sets combining body and load kinematic features.

The design of patient-tailored rehabilitative protocols represents one of the crucial factors that influence motor recovery mechanisms, such as neuroplasticity. This approach, including the patient in the control loop and characterized by a control strategy adaptable to the user's requirements, is expected to significantly improve functional recovery in robot-aided rehabilitation. In this paper, a novel 3D bio-cooperative robotic platform is developed. A new arm-weight support system is included into an operational robotic platform for 3D upper limb robot-aided rehabilitation. The robotic platform is capable of adapting therapy characteristics to specific patient needs, thanks to biomechanical and physiological measurements, and thus closing the subject in the control loop. The level of arm-weight support and the level of the assistance provided by the end-effector robot are varied on the basis of muscular fatigue and biomechanical indicators. An assistance-as-needed approach is applied to provide the appropriate amount of assistance. The proposed platform has been experimentally validated on 10 healthy subjects; they performed 3D point-to-point tasks in two different conditions, i.e., with and without assistance-as-needed. The results have demonstrated the capability of the proposed system to properly adapt to real needs of the patients. Moreover, the provided assistance was shown to reduce the muscular fatigue without negatively influencing motion execution.

Spastic gait is a key feature in patients with hereditary spastic paraparesis, but the gait characterization and the relationship between the gait impairment and clinical characteristics have not been investigated.To describe the gait patterns in hereditary spastic paraparesis and to identify subgroups of patients according to specific kinematic features of walking.We evaluated fifty patients by computerized gait analysis and compared them to healthy participants. We computed time-distance parameters of walking and the range of angular motion at hip, knee, and ankle joints, and at the trunk and pelvis. Lower limb joint moments and muscle co-activation values were also evaluated.We identified three distinct subgroups of patients based on the range of motion values. Subgroup one was characterized by reduced hip, knee, and ankle joint range of motion. These patients were the most severely affected from a clinical standpoint, had the highest spasticity, and walked at the slowest speed. Subgroup three was characterized by an increased hip joint range of motion, but knee and ankle joint range of motion values close to control values. These patients were the most mildly affected and had the highest walking speed. Finally, subgroup two showed reduced knee and ankle joint range of motion, and hip range of motion values close to control values. Disease severity and gait speed in subgroup two were between those of subgroups one and three.We identified three distinctive gait patterns in patients with hereditary spastic paraparesis that correlated robustly with clinical data. Distinguishing specific features in the gait patterns of these patients may help tailor pharmacological and rehabilitative treatments and may help evaluate therapeutic effects over time.

The “WikiWay” is the open editing philosophy of wikis meant to foster open collaboration and continuous improvement of their content. Just like other online communities, wikis often introduce and enforce conventions, constraints, and rules for their content, but do so in a considerably softer way, expecting authors to deliver content that satisfies the conventions and the constraints, or, failing that, having volunteers of the community, the WikiGnomes, fix others' content accordingly. Constrained wikis is our generic framework for wikis to implement validators of community-specific constraints and conventions that preserve the WikiWay and their open collaboration features. To this end, specific requirements need to be observed by validators and a specific software architecture can be used for their implementation, that is, as independent functions (implemented as internal modules or external services) used in a nonintrusive way. Two separate proof-of-concept validators have been implemented for MediaWiki and MoinMoin, respectively, providing an annotated view functions, that is, presenting content authors with violation warnings, rather than preventing them from saving a noncompliant text.