Search

Background: The aim of the present study was to investigate the accuracy of a new digital impression system, comparing it to the plaster impression technique in the realization of full-arch implant-supported metal frameworks. Methods: We took 11 scans (8 of the upper maxilla and 3 of the lower jaw) on a sample of nine patients previously rehabilitated with fixed full-arch screw-retained prostheses following the Columbus Bridge Protocol (CBP) with four to six implants (total: 51) since at least 4 months. Two impressions were taken for each dental arch: one analogic plaster impression using pick-up copings and an open tray technique and a second one using an intra-oral scanner. Two milled metal substructures were realised. The precision and passivity of the substructures were clinically analysed through the Sheffield test and endo-oral radiographs. Laboratory scans of the plaster casts obtained from an intra-oral scanner (IOS) and of the plaster casts obtained from traditional impression were compared with the intraoral scans following Hausdorff’s method and an industrial digital method of optical detection to measure discrepancies. A Mann–Whitney test was performed in order to investigate average distances between surfaces after the superposition. Results: The Sheffield test demonstrated an excellent passivity of the frameworks obtained through both the digital and the analogic method. In 81.81% of cases (n = 9) both substructures were found to have a perfect fit with excellent passivity, while in 18.18% (n = 2) of cases the substructures were found to have a very slight discrepancy. From the radiographic examination, no gaps between the frameworks and the implant heads or multiunit abutments were observed, with 100% accuracy. By superimposing digital files of scans according to Hausdorff’s method, a statistically significant discrepancy (p = 0.006) was found between the digital scans and the digital models obtained from plaster impressions. Three-dimensional optical detection found a mean discrepancy of 0.11 mm between the analogic cast and the cast derived from the digital impression. Conclusions: The present study clinically demonstrates that milled implant-supported full-arch frameworks obtained through a digital scan and the herein described technique have an accuracy comparable to those obtained with traditional plaster impression.

To compare the clinical outcomes of extra-short implants (≤6.5 mm) inserted with one-stage versus two-stage technique in adjacent sites of the upper or lower jaw.In this split-mouth multicenter study, implants were randomly divided into two groups according to the healing phase: two-stage and one-stage technique. Primary outcome measures were implant survival, implant success, and prosthodontic complications. Secondary outcome measurements were: implant stability quotient (ISQ) collected at surgery time (T0), and after 3 (T3) and 12 (T12) months, marginal bone level (MBL) evaluated at T0, T3, T6, and T12, marginal bone loss evaluated at T6 and T12, plaque index (PI), probing depth (PD), bleeding on probing (BoP) evaluated at T3, T6, and T12. Significances of differences between groups were tested by linear mixed model with random intercept.Nineteen patients (8 males and 11 females) were included. A total of 38 implants were inserted. At T12 implant cumulative survival and implant success rate were 100% in both groups. No statistically significant differences were recorded for any of the analyzed parameters between the two groups at any time point. ISQ values were similar at T0 (two-stage: mean 67.53 ± SD 19.47; one-stage: mean 66.53 ± 19.07 p = 0.8738) and increased in both groups at the 12-month follow-up appointment (two-stage: 81.1 ± 7.04; one-stage: 81.39 ± 0.9266). MBL values were similar in the two groups at any time point. At T12 marginal bone loss was 0.46 ± 0.41 (two-stage) and 0.45 ± 0.38 (one-stage) mm (p = 0.9417), while mean PD was 2.7 ± 0.85 (two-stage) and 2.69 ± 0.89 (one-stage) mm.Within the limits of the present short-term report, extra-short implants demonstrated optimal clinical outcomes using the one-stage technique, without statistically significant differences compared with the traditional two-stage approach.

Objectives. The purpose of this study was to evaluate the primary stability of two implants with the same macro- and micromorphology but different thread design and analyze their clinical outcomes over a one-year period. Materials and Methods. 14 patients needing a partial rehabilitation with a delayed loading approach (DEL group: 9 patients) or a full-arch rehabilitation treated with immediately loaded fixed prostheses supported by 4 implants following the Columbus Bridge Protocol (CBP) (IL group: 5 patients) were included. In each patient, at least one SY (implant with standard threads) and one SL implant (implant with an augmented depth of the threads) were randomly inserted. Primary outcome measures were the number of threads exposed at a torque of 30 Ncm and 50 Ncm and final insertion torque. Secondary outcome measures were implant and prosthetic failure, peri-implant bone resorption, and periodontal parameters: bleeding on probing (BoP), plaque index (PI), and probing depth (PD) evaluated at 3, 6, and 12 months of healing. Results. Nineteen SY and 19 SL implants were inserted in 14 patients. Twenty implants (10 SL and 10 SY) were inserted in the IL group, while 18 (9 SL and 9 SY) were inserted in the DEL group and followed-up for 12 months. No patients dropped out. No implants and prostheses failed. No biological complications were identified. No significant differences were found between SY and SL implants comparing the number of exposed threads when inserting the implant with a torque insertion of 30 N (T student test p=.142 and U test p=.164). At 50 N, no threads were visible in either groups. Final torque insertion values were higher for SL (mean: 48.42 Ncm) compared to SY implants (mean: 43.42 Ncm) without a statistically significant difference. All the implants showed good clinical outcomes at the 1-year-in-function visit. Conclusions. After 12 months of function, both implant types provided good clinical outcomes without statistically significant differences between the two groups. A difference in insertion torque (even if not statistically significant) was found with higher insertion torque values for SL implants with a larger thread depth.

Background: The aim of the present multi-center split-mouth randomized control trial was to investigate the effect on peri-implant tissue of abutment with chromium nitride/ niobium nitride (CrN/NbN) coatings (superlattice) compared to traditional machined surface. Methods: Two adjacent posterior implants were inserted in 20 patients. A machined abutment was randomly screwed on either the mesial or distal implant, while a superlattice abutment was screwed on the other one. Implant survival rate, peri-implant probing depth (PPD), plaque index (PI), and bleeding index (BI) were collected 6 months after surgery, while marginal bone loss (MBL) was evaluated at T0 and T6.; Results: Implant survival rate was 97.7%. A total MBL of 0.77 ± 0.50 mm was recorded for superlattice abutments, while a mean MBL of 0.79 ± 0.40 mm was recorded for the abutment with machined surface. A mean PPD of 1.3 ± 0.23 mm was recorded for the superlattice Group, and a mean PPD of 1.31 ± 0.3 was recorded for the machined surface Group. PI was of 0.55 ± 0.51 for superlattice Group and 0.57 ± 0.50 for machined Group, while BI was of 0.47 ± 0.49 for superlattice Group and of 0.46 ± 0.40 for the machined one. No statistically significant difference was highlighted between the two Groups (p > 0.05). Conclusions: After a 6-month observational period, no statistically significant differences were highlighted between superlattice abutment and traditional machined abutment. Further in vitro studies as well as clinical research with longer follow-ups are required to better investigate the surface properties of the novel abutments’ superlattice coating and its effect on the oral tissues.

Oral squamous cell carcinoma (OSCC) is a widespread malignancy with high mortality. In particular, a delay in its diagnosis dramatically decreases the survival rate. The aim of this systematic review was to investigate and summarize clinical results in the literature, regarding the potential use of salivary microRNAs (miRNAs) as diagnostic and prognostic biomarkers for OSCC patients. Twelve papers were selected, including both case–control and cohort studies, and all of them detected significantly dysregulated miRNAs in OSCC patients compared to healthy controls. Based on our results, salivary miRNAs might provide a non-invasive and cost-effective method in the diagnosis of OSCC, and also to monitor more easily its evolution and therapeutic response and therefore aid in the establishment of specific therapeutic strategies.

The present post-trial follow-up investigated the influence of titanium implants with different surface treatments on clinical behavior of soft and hard peri-implant tissues. Each of the 18 included patients received at least two adjacent implants: one control implant with a dual acid-etched (DAE) surface in their apical portion and a machined coronal part, and one test implant with a DAE surface up to its coronal portion. Peri-implant bone level change (BLC), probing depth (PD), bleeding on probing (BOP) and plaque index (PI) were recorded. A total of 42 implants was inserted. The mean follow-up period was 9.3 years (range: 5–16 years) and there were six dropouts. No implant failed. Moderate crestal bone remodeling occurred during the first year after implant insertion, with lower bone loss next to test implants compared to control ones (0.80 vs. 1.39 mm, p = 0.002). This difference was also detected at the 5- (p = 0.011), 6- (p = 0.008) and 7-year follow-up appointment (p = 0.027). No statistically significant differences were found in bone resorption between implants rehabilitated with ceramic vs. composite resin veneering material. No statistically significant differences were detected between test and control implants for BOP, PI, and PD at any time point. The results of the present study suggest that DAE surfaces reduce peri-implant bone loss in the initial phase of healing compared to machined surfaces, while they do not significantly affect soft peri-implant tissue and bone maintenance in the long-term. In conclusion, the minimally rough surfaces favour peri-implant bone maintenance and their effect is greater in the first year post implant insertion.

Background Although full‐arch immediately loaded rehabilitations are widely used nowadays, little information is available on which implant/abutment connection is the most suitable in this type of treatment. Purpose The aim of the present multicentric split‐mouth clinical trial was to compare the clinical outcomes of two different implant‐abutment connections applied in full‐arch immediate loading rehabilitations: external hexagon connection (EHC) versus internal hexagon connection (IHC). Materials and methods Twenty patients were rehabilitated with immediately loaded fixed full‐arch rehabilitations. All the implants presented the same macro‐ and micro‐topography but different implant/abutment connection. IHC were used in one randomly selected side of the jaw and EHC in the other side. Outcome measures were implant survival rate, peri‐implant marginal bone loss (MBL), plaque index (PI), probing depth (PD), and bleeding on probing (BoP) evaluated at 3, 6, 12, and 36‐month post‐loading. Any technical and biological complication was recorded. Kaplan–Meier procedure and linear mixed model were used to perform statistical analysis. Results Forty‐three EHC and 40 IHC implants were inserted. No patients dropped out and two implants failed in the first 6 months. The CSR was 97.7% for EHC and 97.5% for IHC implants. No statistically significant differences were found among the two groups for any of the parameters at any time point. At the 36‐month follow‐up visit a slight difference was found in MBL with a mean value of 1.7 mm in the EHC and of 1.9 mm in the IHC group (p = 0.355). No biologic complications were identified. Seven loosed abutment screws were identified in the entire follow‐up period, two in the EHC, and five in the IHC group without a statistically significant difference (p = 0.394). Conclusions After 36 months in function, both internal and external hexagon connections provided good clinical outcomes and were not associated with any significant difference.

The purpose of this systematic review was to investigate the clinical outcomes of frameworks made of different materials in patients with implant-supported full-arch prostheses. A literature search was conducted on MEDLINE, Scopus and Cochrane Library, until the 1st of March 2021, with the following search terms: framework or substructure combined with “dental implants”. The outcomes evaluated were: implant and prosthesis survival, bone resorption, biological and technical complications. The Cochrane Handbook for Systematic Reviews of Interventions was employed to assess the risk of bias in randomized clinical trials. The Newcastle–Ottawa quality assessment scale was used for non-randomized studies. In total, 924 records were evaluated for title and abstract, and 11 studies were included in the review: 4 clinical randomized trials and 7 cohort studies. The framework materials investigated were: gold alloy, titanium, silver-palladium alloy, zirconia and polymers including acrylic resin and carbon-fiber-reinforced composites. High implant and prosthetic cumulative survival rates were recorded by all included studies. Various materials and different fabrication techniques are now available as alternatives to traditional cast metal frameworks, for full-arch implant-supported rehabilitations. Further long-term studies are needed to validate the use of these materials and clarify their specific clinical indications and manufacturing protocols to optimize their clinical outcomes.

Specific microRNA (miRNA) expression profiles have been reported to be predictive of specific clinical outcomes of dental implants and might be used as biomarkers in implant dentistry with diagnostic and prognostic purposes. The aim of the present narrative review was to summarize current knowledge regarding the use of miRNAs in implant dentistry. The authors attempted to identify all available evidence on the topic and critically appraise it in order to lay the foundation for the development of further research oriented towards the clinical application of miRNAs in implant dentistry.

Purpose To estimate implant survival and peri-implant bone resorption around long vs normal-length implants in full-arch immediate loading rehabilitation of maxillary arches of low bone quality (D4). Materials and methods A total of 45 patients received two mesial normal-length (10 to 15 mm) or longer (18 to 20 mm) implants and two long (18 to 20 mm) distally tilted implants. Differences in bone resorption at 24 months were assessed using the Mann-Whitney U Test. Results At the 24-month follow-up, no significant differences were found in survival (global cumulative survival rate: 98.9%) or bone resorption (mean: 1.1 mm) between long and normal implants (P = .053). Conclusion At 24 months, the use of long implants provides favorable survival and bone maintenance results in the immediate loading rehabilitation of low-quality maxillary arches.

Frameworks made of carbon fibre-reinforced composites (CFRC) seem to be a viable alternative to traditional metal frameworks in implant prosthodontics. CFRC provide stiffness, rigidity and optimal biocompatibility. The aim of the present prospective study was to compare carbon fibre frameworks versus metal frameworks used to rigidly splint implants in full-arch immediate loading rehabilitations. Forty-two patients (test group) were rehabilitated with full-arch immediate loading rehabilitations of the upper jaw (total: 170 implants) following the Columbus Bridge Protocol with four to six implants with distal tilted implants. All patients were treated with resin screw-retained full-arch prostheses endowed with carbon fibre frameworks. The mean follow-up was 22 months (range: 18-24). Differences in the absolute change of bone resorption over time between the two implant sides (mesial and distal) were assessed performing a Mann-Whitney U-test. The outcomes were statistically compared with those of patients rehabilitated following the same protocol but using metal frameworks (control group: 34 patients with 163 implants - data reported in Tealdo, Menini, Bevilacqua, Pera, Pesce, Signori, Pera, Int J Prosthodont, 27, 2014, 207). Ten implants failed in the control group (6·1%); none failed in the test group (P = 0·002). A statistically significant difference in the absolute change of bone resorption around the implants was found between the two groups (P = 0·004), with greater mean peri-implant bone resorption in the control group (1 mm) compared to the test group (0·8 mm). Carbon fibre frameworks may be considered as a viable alternative to the metal ones and showed less marginal bone loss around implants and a greater implant survival rate during the observation period.

Background: The etiology of peri-implantitis is multifactorial, and it is not directly linked to the quantitative amount of plaque. The aim of this study was to evaluate the influence of subgingival microbiota around implants supporting full-arch restorations on clinical indexes of peri-implant health. Method: 47 patients (54 full-arch fixed rehabilitations) were included. Based on the highest value of probing depth (PD), 47 implants (in the test arch), 40 natural teeth and 7 implants (in the antagonist arch) were selected for microbiological sampling (traditional PCR and real-time PCR). Periodontal indexes (plaque index, PlI, probing depth, PD, bleeding on probing, BOP, peri-implant suppuration, PS) and marginal bone loss were also recorded. Results: Despite abundant plaque accumulation, the peri-implant parameters were within normal limits. No statistical difference was found in the microbial population around the test implants and antagonist natural teeth. Treponema denticola was present in a significantly higher amount around implants with increased PlI. Implants with increased BOP showed a significant increase in Treponema denticola and Tannerella forsythia. A significantly higher presence of Porphyromonas gingivalis, Treponema denticola and Tannerella forsythia was identified around the implants affected by peri-implantitis and in smokers. Conclusions: Peri-implantitis is characterized by a complex and polymicrobial disease, that might be influenced by the qualitative profile of plaque. Smoking might also favor implant biological complications in full-arch fixed prosthesis.

The aim of this study was to assess oral health–related quality of life (OHRQoL) of patients before, during, and after completion of implant-supported full-arch immediate loading rehabilitation according to the Columbus Bridge Protocol. Twenty-five patients with compromised dentition were rehabilitated according to the Columbus Bridge Protocol and were assessed for OHRQoL using 4 questionnaires specifically designed for this study and inspired by the Oral Health Impact Profile questionnaire. Patients assessed themselves before surgery, during the healing period (1 week and 2 months after surgery), and after definitive prosthodontic treatment (4 months after surgery). The questionnaires specifically investigated patients' pain, comfort, home oral hygiene habits, satisfaction related to esthetics, masticatory ability, phonetics and general satisfaction with the treatment. Patients reported an improvement of OHRQoL after full-arch immediate-loading rehabilitation. A statistically significant improvement in esthetics and chewing ability was found. After 4 months 92% of the patients did not feel tense about their smile, 96% did not indicate problems relating to other people or smiling, and 92% did not have difficulty eating some foods. Phonetics were a critical issue, especially in the intermediate phase of healing. One week after surgery, the percentage of patients who were very satisfied with phonetics slightly decreased from 48% to 36%. The assessment of patients' OHRQoL related to full-arch immediate-loading implant therapy exhibited a significant improvement in quality of life. The questionnaires herein presented could be an effective tool to evaluate patients' reaction to oral rehabilitation.

OBJECTIVES The aim was to investigate the in vivo efficacy of a cancellous particulate allograft bone in the regeneration of postextractive atrophic sites. MATERIAL AND METHODS Ten patients were selected, and after a minimally invasive extraction of the teeth (T0), a cone beam computed tomography was performed (T1). Seven days after extraction, Puros cancellous particulate homologous graft was inserted into the elected sites together with a membrane (T2). After 4 months, a cone beam computed tomography of the sites was performed (T3). After 5 months, samples of the regenerated sites were taken contextually to implant insertion (T4). The samples were histologically and histomorphometrically analyzed. Intraoral periapical radiographs were accomplished at T4 and at the 6-year follow-up appointment (T5). RESULTS The mean vertical bone augmentation was of 4.1 mm in the lower jaw and of 3.35 mm in the maxilla at T3 appointment. The mean horizontal bone augmentation in the lower jaw was 2.02 and 2.15 mm in the maxilla. At T4, the mean total bone was 60.01% and the mature bone was 98.41. At the 6-year follow-up visit, the mean periimplant bone resorption was 0.14 mm (range 0-0.5 mm). CONCLUSIONS Cancellous particulate allograft bone demonstrated excellent bone regeneration behavior both in terms of quantity and quality, and stable results over a 6-year period. CLINICAL RELEVANCE Cancellous allograft bone can be successfully used to regenerate atrophic sites.

Purpose To compare clinical outcomes of immediate vs delayed implant loading in edentulous maxillae with full-arch fixed prostheses. Materials and methods Two patient groups were identified for this study: (1) the test group (TG), which included 34 patients (19 women, 15 men; mean age 56.7 years) treated with the Columbus Bridge Protocol with 4 to 6 postextractive implants loaded within 24 hours (163 implants total); and (2) the control group (CG), which included 15 patients (6 women, 9 men; mean age 59.96 years) treated with a traditional two-stage delayed loading rehabilitation using 6 to 9 implants inserted in healed sites (97 implants total). All patients were rehabilitated with full-arch fixed prostheses in the maxilla. Results At the 10-year follow-up, no difference in the implant cumulative survival rate between the TG (93.25%) and CG (94.85%) was found. Mean bone loss was significantly lower in the TG (mean: 2.11 mm) compared to the CG (mean: 2.65 mm). All original prostheses were maintained and functioning satisfactorily. Conclusion Maxillary full-arch immediate loading represents a valid alternative to the traditional delayed loading rehabilitation.

Objectives The aim of the present study was to investigate the mechanical characteristics of dental implant frameworks made of unidirectional carbon fiber composite (UF) and to compare them with those provided by multidirectional carbon fiber composite (IF). Methods 8 identical UF samples were used. The samples were initially evaluated by optical microscope and SEM then non-destructive and destructive mechanical tests were performed on 4 samples in order to evaluate dynamic, static elastic modulus, wettability and ultimate strength. The outcomes were compared with those of IF samples tested following the same protocol – data reported in a previous published paper. The remaining 4 samples were aged for 60 days in isotonic saline solution at 37 °C simulating the human saliva. The same tests reported before were performed on the aged samples. Results The dynamic elastic modulus was lower for UF (78.1 GPa for UF vs. 92.2 GPa for IF) as well as the static elastic modulus (71.0 GPa for UF vs. 84.5 GPa for IF). The ultimate strength value was 582 MPa for the IF samples and 700 MPa for the UF. The aging process of the UF samples did not show any appreciable variation, with small differences that falls within the experimental error. Significance Unidirectional carbon fiber-reinforced composite appears suitable for the fabrication of frameworks for implant-supported full-arch dentures. The dynamic elastic modulus was higher for UF while the static elastic modulus was higher for IF. The aging process seems not able to significantly alter the mechanical properties of the material. Further research is needed to evaluate the clinical significance of such outcomes.

PURPOSE To evaluate the accuracy and precision of a digital scanner used to scan four implants positioned according to an immediate loading implant protocol and to assess the accuracy of an aluminum framework fabricated from a digital impression. MATERIALS AND METHODS Five master casts reproducing different edentulous maxillae with four tilted implants were used. Four scan bodies were screwed onto the low-profile abutments, and a digital intraoral scanner was used to perform five digital impressions of each master cast. To assess trueness, a metal framework of the best digital impression was produced with computer-aided design/computer-assisted manufacture (CAD/CAM) technology and passive fit was assessed with the Sheffield test. Gaps between the frameworks and the implant analogs were measured with a stereomicroscope. To assess precision, three-dimensional (3D) point cloud processing software was used to measure the deviations between the five digital impressions of each cast by producing a color map. The deviation values were grouped in three classes, and differences were assessed between class 2 (representing lower discrepancies) and the assembled classes 1 and 3 (representing the higher negative and positive discrepancies, respectively). RESULTS The frameworks showed a mean gap of < 30 μm (range: 2 to 47 μm). A statistically significant difference was found between the two groups by the 3D point cloud software, with higher frequencies of points in class 2 than in grouped classes 1 and 3 (P < .001). CONCLUSION Within the limits of this in vitro study, it appears that a digital impression may represent a reliable method for fabricating full-arch implant frameworks with good passive fit when tilted implants are present.

Several factors contribute to distortion of implant prostheses during fabrication and could prevent passive, accurate adaptation between implants and implant frameworks. The misfit between implants and restorative components may be significant and possibly lead to biologic or mechanical complications. The aim of this article is to describe a laboratory luting technique used to lute implant cylinders to metal frameworks in implant prostheses. This technique provides accurate, passive fits. According to this technique, titanium implant cylinders provided with corresponding external castable cylinders are used. Implant cylinders are screwed into the analogs in the master cast while the castable cylinders on top are splinted together using castable resin to realize a castable resin pattern. After casting, the framework is adjusted and cemented to the titanium cylinders on the master cast. Due to its ease and quickness of use and clinical efficiencies, this technique is deemed particularly useful in immediate loading rehabilitations.

Full-arch immediate loading implant rehabilitations provide patients with compromised dentition an effective treatment to improve their aesthetic and function. Aim of this prospective cohort study was to investigate the correlation between masticatory ability and gastric emptying rates among these patients. Ten subjects (five men and five women) with compromised dentition were tested in two occasions: before treatment and 30 days after the immediate loading rehabilitation. Masticatory ability was evaluated using the sieves test, and the gastric half emptying time (T(1/2)) was assessed by means of the 13C-octanoic acid breath test. A statistically significant increment (P < 0.005) in masticatory ability was found only in reference to the particles smaller than or equal to 4.75 mm, whereas the gastric emptying rate showed a statistically significant reduction between pre- and post-treatment (P = 0.003). A moderate negative correlation (rho = 0.64, P = 0.048) between the percentage change in masticatory ability and the percentage change in gastric emptying rate was evidenced. Patients with compromised dentition rehabilitated with full-arch immediate implant prostheses present a significant improvement of the gastric process.

PURPOSE To evaluate plaque accumulation, peri-implant soft tissue inflammation, and bone resorption in patients with immediately loaded implants supporting fixed full-arch prostheses. MATERIALS AND METHODS A convenience sample of 72 patients treated with fixed full-arch prostheses supported by four to six immediately loaded implants was selected. Bleeding on probing (BOP), Plaque Index (PI), and peri-implant bone loss were measured. The Sixth European Workshop on Periodontology definitions of mucositis and peri-implantitis were used, and collected data were analyzed using a nonparametric test (Spearman's rank correlation). Correlation coefficients (ρ) were defined as follows: < 0.2 = very weak; 0.2 to 0.39 = weak; 0.4 to 0.59 = moderate; 0.6 to 0.79 = strong; 0.8 to 1.0 = very strong. RESULTS A total of 331 implants were analyzed. The mean follow-up observation time was 5.8 years (range: 1 to 14 years); mean PI and BOP were 61.7% and 21.1%, respectively; and mean bone loss was 0.89 mm (standard deviation [SD] 1.09). The mean probing depth was 1.8 mm (range: 0.5 to 5 mm). Five patients presented with one implant each affected by peri-implantitis (6.9%), and 15 patients presented with at least one implant affected by mucositis (20.8%). No correlation was found between PI and bone resorption (P = .08). Very weak correlations were found between BOP and bone resorption (ρ = 0.18; P = .001) and between PI and BOP (ρ = 0.13, P = .019). CONCLUSION The results suggest that plaque accumulation is correlated with peri-implant mucositis; however, plaque accumulation alone does not appear to be associated with bone resorption.

PURPOSE To assess bond strength and failure patterns of carbon fiber-reinforced composite (CFRC) and veneering materials. MATERIALS AND METHODS A total of 20 samples were prepared: 10 veneered with polymethylmethacrylate (group A) and 10 with composite resin (group B). Shear bond strength (SBS) was measured, and failed samples were microscopically observed. RESULTS The mean ± standard deviation (SD) SBS of specimens in group A was slightly higher (7.39 ± 0.24 MPa) than specimens in group B (5.68 ± 0.29 MPa). Microscopic observation showed an adhesive fracture pattern at the CFRC-adhesive interface in both groups. CONCLUSION Adhesion between CFRC and veneering material is reliable and predictable, although a specific protocol needs to be developed to improve adhesion.

Purpose This systematic review considers possible etiologic factors and definitions of peri-implantitis as reported in the recent literature. Materials and methods An electronic search of databases plus a hand search of the most relevant journals published between January 2005 and September 2012 were performed. Results The electronic and manual searches yielded 640 and 14 titles, respectively. From the independent doublecheck of the titles and abstracts, 24 full texts were downloaded (18 clinical studies and 6 animal studies). After reading the full texts, 10 articles (4 clinical studies and 6 animal studies) were included in this review. None of the human articles selected provided sufficient evidence to address the research question, and no human clinical evidence is available to support a cause-effect relationship between peri-implantitis and bacterial accumulation and/or occlusal overload. The animal literature is also not unanimous regarding a specific peri-implantitis etiology. However, a correlation between periodontitis and smoking histories was cited as contributing to a higher incidence of peri-implantitis. Conclusion The available scientific literature is characterized by an absence of a unanimous consensus regarding the etiology of peri-implantitis and its specific relationship to periodontitis. Furthermore, both the choice of the term peri-implantitis and its definition remain controversial.

Objectives The aim of the present study was to investigate the biocompatibility and mechanical characteristics of dental implant frameworks made of carbon fiber composite. Methods The biocompatibility of intact samples and fragments was evaluated by cell count and MTT test according to EN-ISO 10993-5:2009 directions. Destructive and non-destructive mechanical tests were performed in order to evaluate: porosity, static and dynamic elastic modulus of carbon fiber samples. These tests were conducted on different batches of samples manufactured by different dental technicians. The samples were evaluated by optical microscope and by SEM. A compression test was performed to compare complete implant-supported fixed dentures, provided with a metal or carbon fiber framework. Results Carbon fiber intact and fragmented samples showed optimal biocompatibility. Manufacture technique strongly influenced the mechanical characteristics of fiber-reinforced composite materials. The implant-supported full-arch fixed denture provided with a carbon fiber framework, showed a yield strength comparable to the implant-supported full-arch fixed denture, provided with a metal framework. Significance Carbon fiber-reinforced composites demonstrated optimal biocompatibility and mechanical characteristics. They appear suitable for the fabrication of frameworks for implant-supported full-arch dentures. Great attention must be paid to manufacture technique as it strongly affects the material mechanical characteristics.

In endodontically treated teeth, cuspal coverage plays a fundamental role in reducing the risk of fracture. However, the adhesive techniques with or without fiber post increased the possibilities in restoring root-filled teeth. The aim of this study was to determine the effect of the fiber post and/or post length and/or cuspal coverage on the fracture resistance of endodontically treated maxillary premolars. Seventy intact single-rooted maxillary premolars were selected and divided in seven groups of ten each: “intact teeth” (control), “inlay without fiber post” (G1), “inlay with long fiber post” (G2), “inlay with short fiber post” (G3), “onlay without fiber post” (G4), “onlay with long fiber post” (G5), and “onlay with short fiber post” (G6). Except for intact teeth, all specimens were prepared with a mesio–occluso–distal (MOD) cavity, endodontically treated and restored with or without long or short post, with or without cusp coverage. All specimens were thermal-cycled, exposed to a cyclic loading, and then submitted to the static fracture resistance test. Fracture loads and mode of failure were evaluated. A statistically significant difference in fracture resistance was found between group 1 and the other groups (p < 0.001). χ2 test showed statistically significant differences in the patterns of fractures between the groups (p < 0.001). The highest number of favorable fractures was observed in groups 3 and 4. Similar fracture resistance was detected in maxillary premolars endodontically treated with MOD cavity preparations, restored with either direct resin composite with fiber post or cusp capping. The “short post” direct restoration may be a valid alternative in the restoration of root-filled premolars.

OBJECTIVE The aim of this study was to evaluate the accuracy of 7 different implant impression techniques for full-arch prostheses. MATERIALS AND METHODS A master cast simulating an edentulous arch with 4 implants was used. Seven impression techniques were tested: open tray with polyether Impregum (OTI); open tray with splint-polyether Impregum (OTSI); closed tray with polyether Impregum; open tray with polyether Ramitec; open tray with splint-polyether Ramitec; closed tray with polyether Ramitec (CTR); open tray with impression plaster (OTP). Five impressions of the master cast were taken for each technique using an impression simulator device. Casts were realized based on those impressions (n = 35). Median values of deviation from the master cast were recorded for each cast through a 3-dimensional laser scanner. RESULTS Only OTI (P = 0.028) and OTSI (P < 0.001) presented a statistically significant difference compared to the master cast. OTP (P = 0.99) and CTR (P = 0.10) showed median values of deviation close to zero (-0.001 and -0.003 mm, respectively). CONCLUSION Stiff impression materials (such as plaster or rigid polyether) guarantee greater accuracy in cases of multiple implant impressions of patients with full-arch rehabilitations. Splinting of impression copings with acrylic resin did not improve accuracy.

Objectives Short-term results indicated that the Branemark Novum® protocol (Nobel Biocare AB, Goteborg, Sweden) allowed successful rehabilitation of mandibular edentulism with immediately loaded implants. Yet, long-term studies are lacking. The aim of the present retrospective study was to report the 11-year outcomes for patients treated according to this protocol. Material and methods Four patients treated according to the Branemark Novum protocol (Nobel Biocare AB) were followed-up to evaluate implant and prosthesis cumulative survival rate (CSR), implant stability (RFA), marginal bone loss by periapical radiographs, probing depth (PD), and possible complications. Clinical and radiographic parameters were evaluated immediately after completion of the treatment and 1, 5, and 11 years after loading. Results The 11-year implant and prosthesis CSRs were 100%. Implant stability (RFA values) remained stable over the 11-year follow-up. Small bone resorption was found next to distal implants (median 1 mm) after 11 years, while central implants showed greater bone resorption (median 4.5 mm). The PD (mean 3.75 mm at 11 years) grew together with marginal bone loss. One implant complication was detected on a central implant (crater-form bone destruction), and 10 prosthetic complications (fractures of resin or teeth), 80% of which registered on the same parafunctional patient. Conclusions The 11-year results demonstrated that the Branemark Novum protocol (Nobel Biocare AB) is a predictable technique with favorable long-term outcomes. This was a rigid protocol, which could be applied only in patients with specific anatomical characteristics of the lower jaw, but it had the merit of indicating the key factors for full-arch immediate loading rehabilitations.

Purpose: This in vitro study evaluated the adhesive strength of a technique to lute implant cylinders to metal frameworks in implant-supported prostheses and ensure a good passive fit. Materials and Methods: Different height samples were tested: In group 1, implant cylinders were 5 mm long; in group 2, they were 10 mm long. A universal testing machine (Instron) was used to perform pullout tests. Results: The luting technique provided enough adhesive strength for clinical use with greater adhesive strength in group 2 (mean pull-out strength: 2.85 kN in group 1 versus 3.79 kN in group 2). Conclusions: The luting technique provides enough adhesive strength for clinical use. Moreover, specimens with a larger surface for adhesion demonstrated higher adhesive strength compared with shorter specimens.

Purpose: The aim of this study was to analyze through a three-dimensional finite element analysis (3D-FEA) stress distribution on four implants supporting a fullarch implant-supported fixed prosthesis (FFP) using different prosthesis designs. Materials and Methods: A 3D edentulous maxillary model was created and four implants were virtually placed into the maxilla and splinted, simulating an FFP without framework, with a cast metal framework, and with a carbon fiber framework. An occlusal load of 150 N was applied, stresses were transmitted into peri-implant bone, and prosthodontic components were recorded. Results: 3D-FEA revealed higher stresses on the implants (up to +55.16%), on peri-implant bone (up to +56.93%), and in the prosthesis (up to +70.71%) when the full-acrylic prosthesis was simulated. The prosthesis with a carbon fiber framework showed an intermediate behavior between that of the other two configurations. Conclusion: This study suggests that the presence of a rigid framework in full-arch fixed prostheses provides a better load distribution that decreases the maximum values of stress at the levels of implants, prosthesis, and maxillary bone.

Several factors contribute to distortion of implant prostheses during fabrication and could prevent passive, accurate adaptation between implants and implant frameworks. The misfit between implants and restorative components may be significant and possibly lead to biologic or mechanical complications. The aim of this article is to describe a laboratory luting technique used to lute implant cylinders to metal frameworks in implant prostheses. This technique provides accurate, passive fits. According to this technique, titanium implant cylinders provided with corresponding external castable cylinders are used. Implant cylinders are screwed into the analogs in the master cast while the castable cylinders on top are splinted together using castable resin to realize a castable resin pattern. After casting, the framework is adjusted and cemented to the titanium cylinders on the master cast. Due to its ease and quickness of use and clinical efficiencies, this technique is deemed particularly useful in immediate loading rehabilitations.

Introduction: The study evaluated the efficacy of subsonic agitation of sodium hypochlorite (NaOCl) in reducing bacterial load in the root canal. Methods: Root canals of 112 extracted human single-root teeth were preflared using K-Flexofiles (Dentsply Maillefer, Ballaigues, Switzerland) up to #20 and then shaped using ProTaper S1-S2-F1-F2-F3 (Dentsply Maillefer) at the working length. Irrigation was performed with 33 mL of 5% NaOCl, alternating with 10 mL of 10% EDTA. After ethylene oxide sterilization, the root canals were infected with 30 m Lo fEnterococcus faecalis culture and randomly assigned to four groups (n = 25) of different irrigation regimens plus positive and negative controls. Irrigation was performed with 2 mL of 5% NaOCl. In the NaOCl 15 group, the irrigant was left in place for 15 seconds, and in the NaOCl 30 group it was left in place for 30 seconds. In the EndoActivator (EA;Dentsply Tulsa DentalSpecialties, Tulsa,OK) 15and EA 30 groups, NaOCl was subsonically agitated with EA for 15 and 30 seconds, respectively. The residual bacterial count was then evaluated. Differences among groups were analyzed with one-way analysis of variance and the post hoc Bonferroni test (p < 0.05). Results: A statistically significant difference was evidenced among groups (F3 = 9.01, p < 0.001). The standard irrigation groups (NaOCl 15 and 30) showed higher microbial counts than the EA 30 group (p < 0.05). Conclusion: Thirty seconds of NaOCl subsonic agitation with EndoActivator appears to be slightly more effective in reducing bacterial load in the root canal compared with NaOCl irrigation alone. (J Endod 2010;36:1358‐ 1360)

This prospective study reports the 6-year outcomes for patients rehabilitated with an immediate loading protocol of the maxilla (Columbus Bridge Protocol). In this study, 164 implants were inserted in 37 patients and loaded within 24 to 36 hours. Four implants failed during the first 6 months. At the 6-year follow-up, a mean bone loss of 1.52 mm was found. Significantly (P < .0083) less bone loss was found next to tapered implants compared with cylindric implants and next to machined collar implants compared with full acid-etched implants (P < .0083). No significant differences in bone loss were found in tilted versus upright implants or in mesial versus distal implant sites. In addition, there were no significant differences relating to either the degree of abutment angulation or the reason for tooth loss.

Short-term results indicated that the Brånemark NovumFour patients treated according to the Brånemark Novum protocol (Nobel Biocare AB) were followed-up to evaluate implant and prosthesis cumulative survival rate (CSR), implant stability (RFA), marginal bone loss by periapical radiographs, probing depth (PD), and possible complications. Clinical and radiographic parameters were evaluated immediately after completion of the treatment and 1, 5, and 11 years after loading.The 11-year implant and prosthesis CSRs were 100%. Implant stability (RFA values) remained stable over the 11-year follow-up. Small bone resorption was found next to distal implants (median 1 mm) after 11 years, while central implants showed greater bone resorption (median 4.5 mm). The PD (mean 3.75 mm at 11 years) grew together with marginal bone loss. One implant complication was detected on a central implant (crater-form bone destruction), and 10 prosthetic complications (fractures of resin or teeth), 80% of which registered on the same parafunctional patient.The 11-year results demonstrated that the Brånemark Novum protocol (Nobel Biocare AB) is a predictable technique with favorable long-term outcomes. This was a rigid protocol, which could be applied only in patients with specific anatomical characteristics of the lower jaw, but it had the merit of indicating the key factors for full-arch immediate loading rehabilitations.

PURPOSE To measure the vertical occlusal forces transmitted through crowns made of different restorative materials onto simulated peri-implant bone. MATERIALS AND METHODS The study was conducted using a masticatory robot that is able to reproduce the mandibular movements and forces exerted during mastication. During robot mastication, the forces transmitted onto the simulated peri-implant bone were recorded using nine different restorative materials for the simulated single crown: zirconia, two glass-ceramics, a gold alloy, three composite resins, and two acrylic resins. Three identical sample crowns for each material were used. Each crown was placed under 100 masticatory cycles, occluding with the flat upper surface of the robot to evaluate the vertical forces transmitted. Two-way analysis of variance was used. Alpha was set at .05. RESULTS The statistical evaluation of the force peaks recorded on the vertical z-axis showed mean values of 641.8 N for zirconia; 484.5 N and 344.5 N, respectively, for the two glass-ceramics; 344.8 N for gold alloy; 293.6 N, 236 N, and 187.4 N, respectively, for the three composite resins; and 39.3 N and 28.3 N, respectively, for the two acrylic resins. Significant differences were found between materials (P < .0001), except for the comparison between gold alloy and one of the glass-ceramics. CONCLUSION Composite and above all acrylic resin crowns were more able to absorb shock from occlusal forces than crowns made of zirconia, ceramic material, or gold alloy.

Tilted implants have been proposed as an alternative to traditional protocols in the rehabilitation of edentulous maxillae. The aim of this meta-analysis was to evaluate the outcomes of upright and tilted implants supporting full-arch fixed dentures for the immediate rehabilitation of edentulous maxillae, after at least 1 year of function. An electronic search of databases and a hand search of relevant journals in oral implantology were performed according to PRISMA guidelines through August, 2011. The literature search yielded 1,069 articles. Eleven articles were available for analysis. A total of 1,623 implants (778 tilted, 845 upright) were inserted into the maxillae of 324 patients. Seventeen tilted (2.19%) and 16 upright implants (1.89%) failed during the first year. No significant difference in failure rate was found between tilted and upright implants (p value = 0.52). Marginal bone level results were obtained from 6 studies. A non-significant mean difference between tilted and upright implants was found with regard to bone loss. Tilted implants demonstrated a favorable short-term prognosis in full-arch immediate loading rehabilitations of the maxillae. Randomized long-term trials are needed to better elucidate long-term success of tilted vs. upright-positioned implants.