Search

This paper presents the possibilities of determining the range of stresses preceding the critical destruction process in cement composites with the use of micro-events identified by means of a sound spectrum. The presented test results refer to the earlier papers in which micro-events (destruction processes) were identified but without determining the stress level of their occurrence. This paper indicates a correlation of 2/3 of the stress level corresponding to the elastic range with the occurrence of micro-events in traditional and quasi-brittle composites. Tests were carried out on beams (with and without reinforcement) subjected to four-point bending. In summary, it is suggested that the conclusions can be extended to other test cases (e.g., compression strength), which should be confirmed by the appropriate tests. The paper also indicates a need for further research to identify micro-events. The correct recognition of micro-events is important for the safety and durability of traditional and quasi-brittle cement composites.

The detailed analytical and experimental investigation of the fracture behaviour of quasi-brittle materials is an endeavour which has been ongoing worldwide for many years. Such materials are usually characterized in terms of their mechanical fracture parameters, which are determined based on the evaluation of quasi-static fracture experiments. One of the most commonly used building materials with a quasi-brittle response is concrete, which is most often based on a cement matrix. It is sometimes also necessary to characterize concrete included in existing structures. In this case, test specimens are obtained by core drilling, and the investigation is conducted with the requirement to maximize the number of parameters obtained while minimizing the number of test specimens drilled from the structure. This paper focuses on the mechanical fracture parameters of core-drilled specimens taken from a selected concrete structure. Tests were performed on cylindrical specimens with a chevron-notched stress concentrator in the three-point bending configuration in order to determine modulus of elasticity, fracture toughness and fracture energy. Subsequently, theoretical compressive strength was estimated and tests for the determination of compressive strength values were performed focusing on dependence on the slenderness ratio, i.e. the relationship between the compressive strength and the length to diameter ratio of the cylindrical specimens. In relation to the obtained mechanical fracture parameters, selected specimens were analysed and three-dimensionally characterized via high-resolution X-ray computed tomography.

The paper deals with the analysis of the fractal dimension of fracture surfaces of concrete specimens tested in a three-point bending configuration. Fifteen representative specimens were chosen out of a bigger set for the fractal dimension analysis. Their fracture surfaces were scanned by 2D optical profilometry and analysed by the FracDiM software created in the Java programming language. The resulting values of fractal dimensions for specimens of three different sizes are presented.

Knowledge of the mechanical and primarily fracture parameters of composites with a brittle matrix is essential for the quantification of their resistance to crack initiation and growth, and also for the specification of material model parameters employed for the simulation of the quasi-brittle behavior of structures made from this type of composite. Therefore, the main target of this paper is to quantify the mechanical fracture parameters of alkali-activated slag composites with steel microfibers and the contribution of the matrix to their fracture response. The first alkali-activated slag composite was a reference version without fibers; the others incorporated steel microfibers amounting to 5, 10, 15 and 20% by weight of the slag. Prism specimens with an initial central edge notch were used to perform the three-point bending fracture tests. Load vs. displacement (deflection at midspan) and load vs. crack mouth opening displacement diagrams were recorded during the fracture tests. The obtained diagrams were employed as inputs for parameter identification, the aim of which was to transfer the fracture test response data to the desired material parameters. Values were also determined for fracture parameters using the effective crack model, work-of-fracture method and double-K fracture model. All investigated mechanical fracture parameters were improved by the addition of steel microfibers to the alkali-activated matrix. Based on the obtained results, the addition of 10 to 15% of microfibers by weight is optimal from the point of view of the enhancement of the fracture parameters of alkali-activated slag composite

Fine-grained cement-based composites used in civil engineering and construction industry are usually made of cement-based matrix and natural aggregate (such as sand, gravel, crushed stone, etc.). Red ceramic waste agggregate is considered as a perspective replacement of a part of natural aggregate in modern environmentally oriented building materials. Fine-grained cement compositewith natural aggregate partially replaced by ceramic waste aggregate usually show different mechanical fracture characteristics from ordinary fine-grained concrete. The specimens were tested at six different ages. This was the reason for conducting the research programme. Altogether, 6 fine-grained cement mixtures with various proportions of natural and red ceramic waste aggregate were prepared. The aim of this paper is to present and compare mechanical fracture properties obtained from static and fatigue tests. Bulk density, flexural and compressive cube strength, fracture toughness and fatigue properties (SN Wöhler curve) were of special interest. All of these tests are important for a practical application of concrete with ceramic aggregate for structures. All the results were statistically analysed and they showed that the fatigue and mechanical fracture properties were improved or at least kept up with the increasing levels of red ceramic waste aggregate. Environmental impact of application in construction industry of compositesin question is discussed.

A study on the accuracy of an approximation of the stress field in a cracked body is presented. Crack-tip stress tensor is expressed using the linear elastic fracture mechanics (LEFM) theory in this work, more precisely via its multi-parameter formulation, i.e. by Williams power series (WPS). Determination of coefficients of terms of this series is performed using a least squares-based regression technique known as over-deterministic method (ODM) for which results from finite element (FE) method computation are usually taken as inputs. Main attention is paid to a detailed analysis of a suitable selection of FE nodes whose results serve as the inputs to the employed method. Two different ways of FE nodal selection are compared – nodes selected from the crack tip vicinity lying at a ring of a certain radius versus nodes selected more or less uniformly from a specified part of the test specimen body. Comparison of these approaches is made with the help of procedures developed by the authors which enable both the determination of the coefficients of terms of the analytical WPS approximation of the stress field based on the FE results and the backward reconstruction of the field (again using WPS) from those determined terms’ coefficients/functions. The wedge-splitting test (WST) specimen with a crack is taken as example for the study

A study on the approximation of the stress field in the vicinity of crack tip in a compact tension specimen made from Al 2024-T351 is presented. Crack tip stress tensor components are expressed using the linear elastic fracture mechanics (LEFM) theory in this work, more precisely via its multi-parameter formulation, i.e. by Williams power series (WPS). Determination of coefficients of terms of this series is performed using a least squares-based regression technique known as over deterministic method (ODM) for which displacements data obtained experimentally via optical measurements are taken as inputs. The stress fields reconstructed based on the displacement data obtained experimentally by means of optical measurements are verified by means of the stress field approximations derived for the normalized CT specimen via hybrid elements

A quality of multi-parameter approximation of the stress and displacement fields around a crack tip in a non-brittle material test specimen is studied in the paper. The stress field approximation using Williams power series is intended to be utilized for estimation of the nonlinear zone extent which potentially plays a role within methods for determination of true values of fracture parameters of materials exhibiting nonlinear failure. Considering the fact that in the case of elastic-plastic and especially quasi-brittle materials the size of this zone is substantial in comparison to the specimen dimensions, it is necessary to take a large region around the crack tip into account for this task. An automatic utility created to determine the values of coefficients of the higher order terms of Williams power series by usage of over-deterministic method applied on results of finite element analysis of arbitrary mode I test geometry is one of the tested procedures. The second one provides a backward reconstruction of the crack-tip stress field analytically by means of truncated Williams expansion. The developed procedures are based on the support of Java programming language and considerably simplify analyses of the mechanical fields’ description in a farther distance from the crack-tip. The presented research is focused on optimization of selection of FE nodal results for improvement of accuracy of the approximation.

For wedge splitting test specimens, the stress and displacement fields both in the vicinity and also in large distance from the crack tip are investigated by means of numerical methods. Several variants of boundary conditions were modeled. The stress intensity factor K, T-stress and even higher-order terms of William series were determined and subsequently utilized for analytical approximation of the stress field., For wedge splitting test specimens, the stress and displacement fields both in the vicinity and also in large distance from the crack tip are investigated by means of numerical methods. Several variants of boundary conditions were modeled. The stress intensity factor K, T-stress and even higher-order terms of William series were determined and subsequently utilized for analytical approximation of the stress field.