Search

To improve positron emission tomography (PET) image quality, depth-of-interaction (DOI) information and time-of-flight (TOF) information are key technologies. In this work, we developed the DOI-TOF detector based on our original single-ended readout scheme with the continuous layered gadolinium fine aluminum garnet (GFAG) array. The size of each GFAG crystal is $1.45\times 1.45\times 20$ mm3. The multipixel photon counter (MPPC) used as a photo sensor has a surface area of $3.0\times 3.0$ mm2. One pair of crystals coupled with a partial optical window is arranged across two MPPCs. Boundaries without the partial optical window are covered with optical reflectors. Each pair is coupled with paired MPPCs of different patterns. Crystal identification is obtained from paired MPPCs of different patterns and output rates. By limiting the spread of scintillation light, the proposed DOI detector based on the local centroid calculation was expected to improve crystal response, including the edge. For performance comparison, we prepared three discrete layers of the GFAG array with the same total thickness. For the continuous layer, the DOI resolution, the energy resolution and the timing resolution of the pair of detectors are 4.7 mm, 14%, and 402 ps, respectively. Their respective values are 29%, 20%, and 33% better than those with the three discrete layers.

多様な核医学用シンチレータについて、ごく簡単に概説した。

To improve positron emission tomography (PET) image quality, depth-of-interaction (DOI) information and timeof-flight (TOF) information are key technologies. In this work, we developed the DOI-TOF detector based on our original singleended readout scheme with the continuous layered gadolinium fine aluminum garnet (GFAG) array. The size of each GFAG crystal is 1.45×1.45×20 mm3. The multi-pixel photon counter (MPPC) used as a photo-sensor has a surface area of 3.0×3.0 mm2. One pair of crystals coupled with a partial optical window is arranged across two MPPCs. Boundaries without the partial optical window are covered with optical reflectors. Each pair is coupled with paired MPPCs of different patterns. Crystal identification is obtained from paired MPPCs of different patterns and output rates. By limiting the spread of scintillation light, the proposed DOI detector based on the local centroid calculation was expected to improve crystal response including the edge. For performance comparison, we prepared three discrete layers of the GFAG array with the same total thickness. For the continuous layer, the DOI resolution, the energy resolution and the timing resolution of the pair of detectors are 4.7 mm, 14% and 402 ps, respectively. Their respective values are 29%, 20% and 33% better than those with the three discrete layers.

In this article, we developed the novel single-end readout depth-of-interaction (DOI) detector with quadrisected crystals comparable in size to a single photo sensor. The proposed DOI detector consists of 784 gadolinium aluminum gallium garnet (GAGG) crystals, which are arranged in four layers of $14\times14$ arrays coupled with an $8\times8$ multipixel photon counter (MPPC) array. The size of each GAGG crystal is $1.45\times 1.45\times4.5$ mm3. Also, each MPPC has a surface area of $3.0\times3.0$ mm2. One pair of four-layered crystals coupled with a partial optical window is arranged across two MPPCs. Boundaries without the partial optical window are covered with optical reflectors. Light sharing is done between a pair of four-layered crystals optically coupled at one end. Each pair is coupled with paired silicon photomultipliers of different patterns. Crystal identification from each pair is obtained from the output rate of two MPPCs. From 511-keV uniform irradiation, responses of all crystal elements in the four layers can be separated clearly on a 2-D position histogram after applying the Anger calculation. Also, DOI information can be mapped to each cluster on curved lines. The energy resolution for all crystals is 9.1% after event reduction of intercrystal scatter.

—In this article, we developed the novel single-end readout depth-of-interaction (DOI) detector with quadrisected crystals comparable in size to a single photo sensor. The proposed DOI detector consists of 784 gadolinium aluminum gallium garnet (GAGG) crystals, which are arranged in four layers of 14 × 14 arrays coupled with an 8 × 8 multipixel photon counter (MPPC) array. The size of each GAGG crystal is 1.45 × 1.45 × 4.5 mm3. Also, each MPPC has a surface area of 3.0 × 3.0 mm2. One pair of four-layered crystals coupled with a partial optical window is arranged across two MPPCs. Boundaries without the partial optical window are covered with optical reflectors. Light sharing is done between a pair of four-layered crystals optically coupled at one end. Each pair is coupled with paired silicon photomultipliers of different patterns. Crystal identification from each pair is obtained from the output rate of two MPPCs. From 511-keV uniform irradiation, responses of all crystal elements in the four layers can be separated clearly on a 2-D position histogram after applying the Anger calculation. Also, DOI information can be mapped to each cluster on curved lines. The energy resolution for all crystals is 9.1% after event reduction of intercrystal scatter.

Silicon photomultiplier (SiPM) based scintillation detectors are widely used for positron emission tomography (PET), but their application to Compton cameras should be further explored. Whole gamma imaging (WGI) is a combination of PET and a Compton camera realized by inserting a scatter detector ring into a PET ring. In a previous study, we developed a WGI prototype in which the scatter detector consists of Gd3Al2Ga3O12:Ce (GAGG) scintillators coupled with SiPM for a proof-of-concept. However, its Compton imaging performance was not as good as its PET imaging performance. In this paper, we developed a two-layer staggered GAGG scatter detector which was optimized for WGI. GAGG crystals 1.45×1.45×4.5 mm3 in size were arranged into a 13×13 array for the 1st layer and a 14×14 array for the 2nd layer with a staggered arrangement. The two-layer crystal block was optically coupled to an 8×8 SiPM array (3 mm pixel). Using radioactive sources with different energies, we investigated the energy resolution performance experimentally. Almost all crystals were clearly separated in the flood histogram at multiple energies. The developed detector showed energy resolutions of 7.7% to 8.5% at 511 keV, which was better than that of the detector of the current WGI prototype. The next generation WGI system was modeled in simulations using the obtained energy resolution data. The simulation results showed that the WGI with the developed detector had 1.2 times better sensitivity and better angular resolution in the peripheral region than the current WGI prototype.

Recently, silicon photomultipliers (SiPMs) have become established as photo-sensors for PET scanners. Commercially available SiPM arrays are typically about 3–4 cm in size. In order to develop larger detectors with an Anger calculation, multiple SiPM arrays need to be combined. This configuration requires the use of a light guide and has inactive areas between SiPM arrays. If not addressed, crystal identification degrades not only for peripheral crystals but also for crystals to bridge the gap between the SiPM arrays. On the other hand, we have developed the crosshair light-sharing (CLS) PET detector, which is based on a single-ended readout scheme with roughly quadrisected crystals comparable in size to a SiPM, with depth-of-interaction (DOI) capability. The CLS PET detector based on the local centroid calculation was expected to mitigate the edge effect similar to what the one-to-one coupling detector is able to do. In this work, we developed the axially long CLS PET detector with two multipixel photon counter (MPPC) arrays. The proposed long CLS PET detector consisted of 30 × 14 gadolinium fine aluminum garnet (GFAG) arrays coupled to two 8 × 8 MPPC arrays without the light guide. From 511-keV uniform irradiation, responses of all crystal elements could be separated clearly on a 2D position histogram after applying the Anger calculation. Pulse heights of additional crystals to bridge the gap were 18% lower than those of crystals at the center of the MPPC array, but similar to that of the peripheral crystals based on non-uniformity of the MPPC array. On the other hand, energy resolutions of additional crystals to bridge the gap were almost the same to those of other crystals. The long CLS PET detector promises improvement of the packing fraction while keeping performance.