Search

This paper evaluates the benefit of integrating vehicle-based mobile crowd-sensing tasks into the ride-hailing system through the collaboration between the data user and the ride-hailing platform. In such a system, the ride-hailing platform commissions high-valued sensing tasks to idle drivers who can undertake either ride-hailing or sensing requests. Considering the different service requirements and time windows between sensing and ride-hailing requests, we design a staggered operation strategy for ride-hailing order matching and the sensing task assignment. The auction-based mechanisms are employed to minimize costs while incentivizing driver participation in mobile sensing. To address the budget deficit problem of the primal VCG-based task assignment mechanism, we refine the driver selection approach and tailor the payment rule by imposing additional budget constraints. We demonstrate the benefits of our proposed mechanism through a series of numerical experiments using the NYC Taxi data. Experimental results reveal the potential of the mechanism for achieving high completion rates of sensing tasks at low social costs without degrading ride-hailing services. Furthermore, drivers who participate in both mobile sensing tasks and ride-hailing requests may gain higher income, but this advantage may diminish with an increasing number of such drivers and higher demand for ride-hailing services., Comment: 30 pages, 9 figures

Many e-commerce marketplaces offer their users fast delivery options for free to meet the increasing needs of users, imposing an excessive burden on city logistics. Therefore, understanding e-commerce users' preference for delivery options is a key to designing logistics policies. To this end, this study designs a stated choice survey in which respondents are faced with choice tasks among different delivery options and time slots, which was completed by 4,062 users from the three major metropolitan areas in Japan. To analyze the data, mixed logit models capturing taste heterogeneity as well as flexible substitution patterns have been estimated. The model estimation results indicate that delivery attributes including fee, time, and time slot size are significant determinants of the delivery option choices. Associations between users' preferences and socio-demographic characteristics, such as age, gender, teleworking frequency and the presence of a delivery box, were also suggested. Moreover, we analyzed two willingness-to-pay measures for delivery, namely, the value of delivery time savings (VODT) and the value of time slot shortening (VOTS), and applied a non-semiparametric approach to estimate their distributions in a data-oriented manner. Although VODT has a large heterogeneity among respondents, the estimated median VODT is 25.6 JPY/day, implying that more than half of the respondents would wait an additional day if the delivery fee were increased by only 26 JPY, that is, they do not necessarily need a fast delivery option but often request it when cheap or almost free. Moreover, VOTS was found to be low, distributed with the median of 5.0 JPY/hour; that is, users do not highly value the reduction in time slot size in monetary terms. These findings on e-commerce users' preferences can help in designing levels of service for last-mile delivery to significantly improve its efficiency., Comment: Section 1 needs to be rewritten

In this study, we report on a direct measurement method for the electrocaloric effect, the heating/cooling upon application/removal of an electric field in dielectric materials, based on a lock-in thermography technique. By use of sinusoidal excitation and multi-harmonic detection, the actual temperature change can be measured by a single measurement in the frequency domain even when the electrocaloric effect shows nonlinear response to the excitation field. We have demonstrated the method by measuring the temperature dependence of the electric-field-induced temperature change for two Sr-doped BaTiO$_3$ systems with different ferroelectric-paraelectric phase transition temperatures, where the procedure for extracting the pure electrocaloric contribution free from heat losses and Joule heating due to leakage currents is introduced. This method can be used irrespective of the type of dielectric materials and enables simultaneous estimation of the polarization change and power dissipation during the application of the electric field, being a convenient imaging measurement method for the electrocaloric effect.

Perimeter control involves monitoring network-wide traffic and regulating traffic inflow to alleviate hypercongestion. Implementation of transit priority with perimeter control measures, which allow transit into a controlled area without queuing at the perimeter boundary, is an effective strategy in bimodal transportation systems. However, travelers' behavior changes in response to perimeter control strategies, such as shifts in their departure times and transportation modes, have not been fully investigated. Therefore, important questions remain, such as the use of transit during perimeter control with transit priority. This paper examines the travelers' behavior changes in response to perimeter control with transit priority in a mixed bimodal transportation system with cars and flexible route transit (FRT) vehicles. We model departure time and transportation mode choices in such a transportation system with hypercongestion and discomfort in FRT (called the mixed bimodal bathtub model). Initially, we investigate the properties of dynamic user equilibrium without perimeter control. Then, we study the equilibrium patterns during perimeter control with transit priority. Unlike existing works, we find that the number of FRT passengers decreases with time toward the desired arrival time and that FRT may not be used around the peak of rush hour. Furthermore, transit priority may not be sufficient to promote the use of FRT, and additional incentive such as subsidy for lower fares may be required to encourage FRT use during perimeter control. Finally, we show that operating many FRT vehicles does not always decrease the equilibrium cost, even under perimeter control with transit priority.

Unlike the lockdown measures taken in some countries or cities, the Japanese government declared a "State of Emergency" (SOE) under which people were only requested to reduce their contact with other people by at least 70 %, while some local governments also implemented their own mobility-reduction measures that had no legal basis. The effects of these measures are still unclear. Thus, in this study, we investigate changes in travel patterns in response to the COVID-19 outbreak and related policy measures in Japan using longitudinal aggregated mobile phone data. Specifically, we consider daily travel patterns as networks and analyze their structural changes by applying a framework for analyzing temporal networks used in network science. The cluster analysis with the network similarity measures across different dates showed that there are six main types of mobility patterns in the three major metropolitan areas of Japan: (I) weekends and holidays prior to the COVID-19 outbreak, (II) weekdays prior to the COVID-19 outbreak, (III) weekends and holidays before and after the SOE, (IV) weekdays before and after the SOE, (V) weekends and holidays during the SOE, and (VI) weekdays during the SOE. It was also found that travel patterns might have started to change from March 2020, when most schools were closed, and that the mobility patterns after the SOE returned to those prior to the SOE. Interestingly, we found that after the lifting of the SOE, travel patterns remained similar to those during the SOE for a few days, suggesting the possibility that self-restraint continued after the lifting of the SOE. Moreover, in the case of the Nagoya metropolitan area, we found that people voluntarily changed their travel patterns when the number of cases increased., Comment: 19 pages, 11 figures

Urban rail transit often operates with high service frequencies to serve heavy passenger demand during rush hours. Such operations can be delayed by two types of congestion: train congestion and passenger congestion, both of which interact with each other. This delay is problematic for many transit systems, since it can be amplified due to the interaction. However, there are no tractable models describing them; and it makes difficult to analyze management strategies of congested transit systems in general and tractable ways. To fill this gap, this article proposes simple yet physical and dynamic model of urban rail transit. First, a fundamental diagram of transit system (i.e., theoretical relation among train-flow, train-density, and passenger-flow) is analytically derived considering the aforementioned physical interaction. Then, a macroscopic model of transit system for dynamic transit assignment is developed based on the fundamental diagram. Finally, accuracy of the macroscopic model is investigated by comparing to microscopic simulation. The proposed models would be useful for mathematical analysis on management strategies of urban rail transit systems, in a similar way that the macroscopic fundamental diagram of urban traffic did.

We consider the problem of coordination via signaling in network congestion games to improve social welfare deteriorated by incomplete information about traffic flow. Traditional studies on signaling, which focus on exogenous factors of congestion and ignore congestion externalities, fail to discuss the oscillations of traffic flow. To address this gap, we formulate a problem of designing a coordination signal on endogenous information about traffic flow and introduce a it self-fulfilling characteristic of a signal that guarantees an outcome flow consistent with the signal itself without causing the unwanted oscillation. An instance of the self-fulfilling signal is shown in the case of a Gaussian signal distribution. In addition, we show simple numerical examples. The results reveal how a self-fulfilling signal suppresses the oscillation and simultaneously improves social welfare through improved network efficiency., Comment: The final publication is available at Springer via http://dx.doi.org/10.1007/s11067-017-9351-4