Search

Due to climate change, population increase, and the urban heat island effect (UHI), the demand for cooling energy, especially in urban areas, has increased and will further increase in the future. Technologies such as radiative cooling offer a sustainable and energy-free solution by using the wavelength ranges of the atmosphere that are transparent to electromagnetic radiation, the so-called atmospheric window (8–13 µm), to emit thermal radiation into the colder (3 K) outer space. Previous publications in the field of textile building cooling have focused on specific fiber structures and textile substrate materials as well as complex multi-layer constructions, which restrict the use for highly scaled outdoor applications. This paper describes the development of a novel substrate-independent coating with spectrally selective radiative properties. By adapting the coating parameters and combining low-emitting and solar-reflective particles, along with a matrix material emitting strongly in the mid-infrared range (MIR), substrate-independent cooling below ambient temperature is achieved. Moreover, the coating is designed to be easily applicable, with a low thickness, to ensure high flexibility and scalability, making it suitable for various applications such as membrane architecture, textile roofs, or tent construction. The results show a median daytime temperature reduction (7 a.m.–7 p.m.) of 2 °C below ambient temperature on a hot summer day.

Integrating ceramic matrix systems into coreless filament winding (CFW) enables the creation of sustainable, heat- and fire-resistant fiber composite lightweight structures. This study introduces a chemically bonded ceramic matrix system based on metakaolin, tailored for space applications utilizing lunar resources. The system employs acidic activation for processing with basalt/mineral fibers and alkaline activation for carbon fibers composites. Initially, the constituents of the matrix system are outlined, alongside potential synthesis pathways from lunar resources. Various formulations, incorporating different additives, are proposed. Through coupon compression testing, the most performative formulations for each activation type are selected for further investigation. The addition of zirconium silicate resulted in a higher compressive strength without significantly affecting the compressive modulus. The study then proceeds to experimentally characterize the matrix system’s viscosity. Subsequently, the processability of the proposed matrix system with CFW is demonstrated through the fabrication of generic medium-size lattice samples. Finally, these samples undergo destructive structural testing in compression. While emphasizing material development aspects, the investigation concludes that the feasibility of the proposed concept is validated through the successful fabrication and testing of generic CFW samples, affirming its potential use in space-related structural applications.

Abstract Climate change necessitates exploring innovative geoengineering solutions to mitigate its effects—one such solution is deploying planetary sunshade satellites at Sun–Earth Lagrange point 1 to regulate solar radiation on Earth directly. However, such long-span space structures present unique technical challenges, particularly structural scalability, on-orbit manufacturing, and in-situ resource utilization. This paper proposes a structural concept for the sunshade’s foil support system and derives from that a component-level modular system for long-span fiber composite lightweight trusses using coreless filament winding. Within a laboratory-scale case study, the component scalability, as well as the manufacturing and material impacts, were experimentally investigated by bending deflection testing. Based on these experimental results, FE models of the proposed structural concept were calibrated to estimate the maximum displacement and mass of the foil support structure, while comparing the influences of foil edge length, orbital load case, and material selection.

The selection of materials in the construction industry plays a pivotal role in advancing sustainability goals. Traditional materials derived from natural resources face inherent constraints linked to geographic limitation, growth time, and geometric inconsistency and therefore recent attention has shifted towards developing novel bio-based materials. Composites, offering varying properties and geometries, are becoming increasingly popular for customising materials for specific applications. Pultrusion, a technology for manufacturing linear fibre-reinforced composites, is a well-established and reliable method. This study delves into optimising pultrusion technology, which traditionally relies on synthetic fibres, by exploring the potential of natural alternatives, specifically hemp bast fibres. Additionally, it presents a customised formulation based on a plant-based resin and additives. This formulation is tailored for pultrusion to produce high-performance biocomposites for use as load-bearing components in structural applications, with an initial focus on bending structures. The study elaborates on the material composition and performance of these newly developed natural fibre pultruded profiles, showcasing their mechanical capabilities through rigorous experimentation and testing. The results demonstrate the material's mechanical capabilities showcasing a flexural strength of 260 MPa with a bending modulus of 21 GPa and a bending radius reaching 0.5 m. While this study focuses on the material formulation tested on laboratory-scale pultrusion, the findings will be later applied in an upscaled production at an industrial level, aiming to enhance overall sustainability in the construction industry.

This paper investigates the theoretical and experimental cooling performance of textile materials utilizing radiative cooling technology. By applying Kirchhoff’s law, the emissivity of surfaces is determined, revealing that materials with high transmission values can achieve comparable cooling performance to those with high reflection values. Notably, materials exhibiting moderate reflectance and transmittance in the solar range tend to absorb minimal solar radiation, thus offering high theoretical cooling performance. However, practical applications like building envelopes or clothing present challenges due to the impact of background radiation on overall cooling capacity. Despite their intrinsic cooling properties, a significant portion of solar radiation is transmitted, complicating matters as the background can significantly affect overall cooling performance. This study provides a solution that accounts for the influence of background materials. Based on spectral data, various background materials and their impact on different semi-transparent comparison materials can be considered, and cooling performance can be simulated. This enables the simulation of cooling performance for various application scenarios and facilitates comparisons between transparent, semi-transparent, and opaque textile materials.

A continuously adjustable façade shading system functionalized with photovoltaics enables, besides adaptive shading, energy harvesting by solar tracking. This requires large bending motion in two directions. In this paper, the development of an appropriate façade module – FlectoSol – is presented. To achieve motion of ±80°, first time two pneumatic actuators are integrated into a GFRP-elastomer hybrid composite. To improve energy efficiency resp. air pressure consumption of actuation without impairing shading, a parametric study is performed. In detail the influencing criteria of the bending motion “overlap of the actuators” resp. “stiffness ratio of the actuator-surrounding GFRP” and their effect on the target parameters “bending angle”, “shadow width” resp. “air pressure consumption” are analyzed. It could be stated that the “stiffness ratio” only effects the air pressure consumption, but the “overlap” also effects the shadow width. The bending angle itself is, up to ±80°, only limited by the absolute laminate stiffness.

Polymer concrete has proved to be advantageous in machine building for many years thanks to its excellent damping properties. Until now, its use was limited to machine beds due to its comparatively low tensile strength. Its use in moving structural components has not been possible until now. Recent research results have shown that this challenge can be met by integrating prestressed carbon fibers. Until now, the production of samples out of prestressed fiber-reinforced polymer concrete has been carried out according to fixed specifications. It is not yet clear whether these specifications are suitable to fully exploit the potential of the material. Samples manufactured to these specifications show at least a large scatter in bending stiffness. Within the scope of this paper, the existing manufacturing process is validated by the variation of process steps. Specifically, this involved the use of a shaker, variation of the dwell time in the mold, variation of the resin content, and the procedure for impregnating the fibers. The characterization of the samples showed that the scatter could only be reduced by increasing the dwell time. However, this leads to a decrease in bending stiffness and, thus, is not suitable for further improvement of the novel material.

The aim of this study was to characterise the microstructural organisation of staple carbon fibre-reinforced polymer composites and to investigate their mechanical properties. Conventionally, fibre-reinforced materials are manufactured using continuous fibres. However, discontinuous fibres are crucial for developing sustainable structural second-life applications. Specifically, aligning staple fibres into yarn or tape-like structures enables similar usage to continuous fibre-based products. Understanding the effects of fibre orientation, fibre length, and compaction on mechanical performance can facilitate the fibres’ use as standard engineering materials. This study employed methods ranging from microscale to macroscale, such as image analysis, X-ray computed tomography, and mechanical testing, to quantify the microstructural organisations resulting from different alignment processing methods. These results were compared with the results of mechanical tests to validate and comprehend the relationship between fibre alignment and strength. The results show a significant influence of alignment on fibre orientation distribution, fibre volume fraction, tortuosity, and mechanical properties. Furthermore, different characteristics of the staple fibre tapes were identified and attributed to kinematic effects during movement of the sliver alignment unit, resulting in varying tape thicknesses and fuzzy surfaces.

The extraction of fibres from digestate can enhance the profitability of biogas stations. Furthermore, fibre from digestate can be an environmentally friendly alternative to commonly used fibres. In this study a nonwoven of the solid fibrous components of biogas digestate was used. The nonwoven was infiltrated and consolidated with a biobased thermoset matrix by a hot-pressing process. Multiple processing parameters were varied (matrix amount, pressing conditions) to evaluate mechano-physical properties. A pressure of 4.5MPa resulted in a high-quality composite with a matrix ratio of 47% by weight. A young’s modulus of approximately 5500MPa and a strength of approximately 70MPa is reached. Different applications are conceivable, e.g. indoor furniture or decorative surfaces.

Natural fibers do not have a long life in soil; therefore, they cannot replace synthetic textiles in many applications. However, in order to solve ever-increasing global environmental problems due to microplastics, more and more natural polymers must be used, creating a need for research into the sustainable life extension of natural fibers. Lignin is, along with cellulose, a main component of wood, and is produced in large quantities as waste during paper production. With appropriate processing, lignin can be exploited/used as a textile auxiliary to combine the strength-enhancing properties of textiles made from natural fibers with the protective properties of a lignin coating. However, there is not yet sufficient research on how to integrate lignin into textile applications. For this purpose, in this study, we have investigated whether thermoplastic lignin can be processed as a surface protective coating. We tested lignin as a yarn coating to extend the service life of cellulosic textiles. Cotton yarns have been coated with lignin in variations of coating mass, characterized and investigated by means of soil burial tests. As the soil burial tests conducted in climate chamber and outdoor field environments showed, the lifespan of textiles made from natural fibers can be significantly extended with a lignin coating. Long-term resilience has been demonstrated in standard burial tests. In the outdoor tests, the lignin coating was still fully intact, even after about 160 days of burial. The textile materials coated in this way enable sustainable applications, especially for geotextiles. They have an adjustable, sufficiently long service life; however, they are still biodegradable, and can therefore replace some applications, such as vegetating trench/brook slopes, with synthetic materials. Lignin-coated textiles have the potential to significantly reduce the carbon footprint, reduce not only the dependence on petroleum-based products but also the amount of microplastics entering the environment. Further research can be conducted to improve lignin compounding in terms of other interesting properties for specific textile applications. Process optimization could increase the protective effect and further extend the life of useful textiles in soil.

Mass transport in textiles is crucial. Knowledge of effective mass transport properties of textiles can be used to improve processes and applications where textiles are used. Mass transfer in knitted and woven fabrics strongly depends on the yarn used. In particular, the permeability and effective diffusion coefficient of yarns are of interest. Correlations are often used to estimate the mass transfer properties of yarns. These correlations commonly assume an ordered distribution, but here we demonstrate that an ordered distribution leads to an overestimation of mass transfer properties. We therefore address the impact of random ordering on the effective diffusivity and permeability of yarns and show that it is important to account for the random arrangement of fibers in order to predict mass transfer. To do this, Representative Volume Elements are randomly generated to represent the structure of yarns made from continuous filaments of synthetic materials. Furthermore, parallel, randomly arranged fibers with a circular cross-section are assumed. By solving the so-called cell problems on the Representative Volume Elements, transport coefficients can be calculated for given porosities. These transport coefficients, which are based on a digital reconstruction of the yarn and asymptotic homogenization, are then used to derive an improved correlation for the effective diffusivity and permeability as a function of porosity and fiber diameter. At porosities below 0.7, the predicted transport is significantly lower under the assumption of random ordering. The approach is not limited to circular fibers and may be extended to arbitrary fiber geometries.

The present experimental work analyses the potential of lignin as a matrix for materials made from renewable resources for composite components and the production of hybrid semi-finished products by coating a flax fibre yarn. Natural fibres, due to their low density, in combination with lignin can be a new renewable source for lightweight products. For this purpose, the extrusion process was adapted to lignin as a matrix material for bio-based composites and coating of natural fibre yarns. A commercial flax yarn is the basis for the lignin coating by extrusion. Subsequently, the coated flax yarn was characterised with regard to selected yarn properties. In order to produce composite plates, the lignin-coated flax yarn was used as warp yarn in a bidirectional fabric due to its insufficient flexibility transversely to the yarn axis. The commercial flax yarn was used as weft yarn to increase the fibre volume content. The tensile and flexural properties of the bio-based composite material were determined. There was a significant difference in the mechanical properties between the warp and weft directions. The results show that lignin can be used as matrix material for bio-based natural fibre composites and the coating of natural fibre yarns is an alternative to spun hybrid yarns.

Coreless filament winding is an emerging fabrication technology in the field of building construction with the potential to significantly decrease construction material consumption, while being fully automatable. Therefore, this technology could offer a solution to the increasing worldwide demand for building floor space in the next decades by optimizing and reducing the material usage. Current research focuses mainly on the design and engineering aspects while using carbon and glass fibers with epoxy resin; however, in order to move towards more sustainable structures, other fiber and resin material systems should also be assessed. This study integrates a selection of potential alternative fibers into the coreless filament winding process by adapting the fabrication equipment and process. A bio-based epoxy resin was introduced and compared to a conventional petroleum-based one. Generic coreless wound components were created for evaluating the fabrication suitability of selected alternative fibers. Four-point bending tests were performed for assessing the structural performance in relation to the sustainability of twelve alternative fibers and two resins. In this study, embodied energy and global warming potential from the literature were used as life-cycle assessment indexes to compare the material systems. Among the investigated fibers, flax showed the highest potential while bio-based resins are advisable at low fiber volume ratios.

Increasing resource consumption and a growing amount of textile waste increase the importance of a circular economy and recycling in the fashion and apparel industry. Environmentally friendly bio-based composites made from cellulosic fibres obtained from textile waste, and polymers based on renewable raw materials present a possible solution. In this study, the development of textile semi-finished products based on medium-to-long cotton and flax fibres obtained from textile waste in combination with a bio-based thermoplastic matrix for lightweight applications is investigated. For the production of natural fibre-polylactide hybrid yarns, fibre slivers with improved fibre orientation and blending are produced. Subsequently, quasi-unidirectional woven fabrics are produced and consolidated into bio-based composites. Textile and mechanical properties of hybrid yarns as well as bio-composites are analysed with regard to the influence of fibre length, fibre distribution in the yarn, yarn structure and fibre volume content. The results show that the production of bio-based semi-finished products can be a potential way for upcycling textile waste.

Additive manufacturing processes, such as coreless filament winding with fiber composites or laser powder bed fusion with metals, can produce lightweight structures while exhibiting process-specific characteristics. Those features must be accounted for to successfully combine multiple processes and materials. This hybrid approach can merge the different benefits to realize mass savings in load-bearing structures with high mass-specific stiffnesses, strict geometrical tolerances, and machinability. In this study, a digital tool for coreless filament winding was developed to support all project phases by natively capturing the process-specific characteristics. As a demonstration, an aluminum base plate was stiffened by a coreless wound fiber-composite structure, which was attached by additively manufactured metallic winding pins. The geometrical deviations and surface roughness of the pins were investigated to describe the interface. The concept of multi-stage winding was introduced to reduce fiber–fiber interaction. The demonstration example exhibited an increase in mass-specific component stiffness by a factor of 2.5 with only 1/5 of the mass of a state-of-the-art reference. The hybrid design approach holds great potential to increase performance if process-specific features, interfaces, material interaction, and processes interdependencies are aligned during the digitized design phase.

The connection between flexible textiles and stiff electronic components has always been structurally weak and a limiting factor in the establishment of smart textiles in our everyday life. This paper focuses on the formation of reliable connections between conductive textiles and conventional litz wires using ultrasonic welding. The paper offers a promising approach to solving this problem. The electrical and mechanical performance of the samples were investigated after 15 and 30 wash-and-dry cycles in a laundry machine. Here the contact resistances and their peeling strength were measured. Furthermore, their connection properties were analysed in microsections. The resistance of the joints increased more than 300%, because the silver-coated wires suffered under the laundry cycles. Meanwhile, the mechanical strength during the peeling test decreased by only about 20% after 15 cycles and remained the same after 30 cycles. The good results obtained in this study suggest that ultrasonic welding offers a useful approach to the connection of textile electronics to conductive wires and to the manufacture of smart textiles.

A hemispherical research demonstration pavilion was presented to the public from April to October 2019. It was the first large-scale lightweight dome with a supporting roof structure primarily made of carbon- and glass-fiber-reinforced composites, fabricated by robotic coreless filament winding. We conducted monitoring to ascertain the sturdiness of the fiber composite material of the supporting structure over the course of 130 days. This paper presents the methods and results of on-site monitoring as well as laboratory inspections. The thermal behavior of the pavilion was characterized, the color change of the matrix was quantified, and the inner composition of the coreless wound structures was investigated. This validated the structural design and revealed that the surface temperatures of the carbon fibers do not exceed the guideline values of flat, black façades and that UV absorbers need to be improved for such applications.

This paper aims to define the influencing design criteria for compliant folding mechanisms with pneumatically actuated hinges consisting of fiber-reinforced plastic (FRP). Through simulation and physical testing, the influence of stiffness, hinge width as well as variation of the stiffness, in the flaps without changing the stiffness in the hinge zone, was evaluated. Within a finite element model software, a workflow was developed for simulations, in order to infer mathematical models for the prediction of mechanical properties and the deformation behavior as a function of the aforementioned parameters. In conclusion, the bending angle increases with decreasing material stiffness and with increasing hinge width, while it is not affected by the flap stiffness itself. The defined workflow builds a basis for the development of a predictive model for the deformation behavior of FRPs.

We developed and evaluated different textile-based inductive coils for near-field wireless power transmission. The technology uses electromagnetic induction for the contactless transfer of electrical energy. Therefore, we investigated various methods for the attachment of conductive materials on a textile-based material and the production of textile-based coils based on QI standard. Afterwards, the textile-based coils were examined and evaluated due to their specific quality characteristics. This happens by calculating the transmission quality and the maximum efficiency of the system which enables comparison of different coil systems and indicates the transmission efficiency of the systems.

In the field of food packaging, the addition of exfoliated layered silicates in polymers has been established to improve the polymers’ gas barrier properties. Using these polymers as coatings to protect smart textiles from oxidation and corrosion while maintaining their textile properties should significantly extend their lifetime and promote their market penetration. The aim of this study was to print new polymer dispersions containing layered silicates to protect screen-printed conductive structures, and to test the resulting samples. For this, appropriate printing parameters were determined by statistical design of experiments. According to these results, conductive structures were printed and protected with the selected coating. The abrasion resistance and the continuity of the protective layer of the printed samples were then measured. A continuous protective coating of approximately 70–80 µm thickness was applied on a conductive structure. The printed samples showed a very high resistance to abrasion (unchanged by 85,000 abrasion cycles) while remaining flexible and presenting a lower water vapor permeability (

A suitable connection method to automatically produce E-textiles does not exist. Ultrasonic soldering could be a good solution for that since it works with flux-free solder, which avoids embrittlement of the textile integrated wires. This article describes the detailed process of robot-assisted ultrasonic soldering of e-textiles to printed circuit boards (PCB). The aim is to understand the influencing factors affecting the connection and to determine the corresponding solder parameters. Various test methods are used to evaluate the samples, such as direct optical observation of the microstructure, a peeling tensile test, and a contact resistance measurement. The contact strength increases by reducing the operating temperature and the ultrasonic time. The lower operating temperature and the reduced ultrasonic time cause a more homogeneous metal structure with less defects improving the mechanical strength of the samples.

Experts attest the smart textiles market will have high growth potential during the next ten years. Laser soldering is considered to be a good contacting method because it is a contactless process. For this reason, it is intended to investigate the contacting process of printed circuit boards (PCB) to isolated conductive textile strips by means of a ytterbium-doped fiber laser (1064 nm). During the investigation, the copper strands in the textile tape were stripped by the laser and soldered to the PCB without any transport of the textile. Therefore, we investigated different sets of parameters by means of a design of experiment (DoE) for different types of solder pastes. Finally, the joinings were electrically analyzed using a contact resistance test, optically with a REM examination, and mechanically using a peeling test.

Due to climate change, population increase, and the urban heat island effect (UHI), the demand for cooling energy, especially in urban areas, has increased and will further increase in the future. Technologies such as radiative cooling offer a sustainable and energy-free solution by using the wavelength ranges of the atmosphere that are transparent to electromagnetic radiation, the so-called atmospheric window (8–13 µm), to emit thermal radiation into the colder (3 K) outer space. Previous publications in the field of textile building cooling have focused on specific fiber structures and textile substrate materials as well as complex multi-layer constructions, which restrict the use for highly scaled outdoor applications. This paper describes the development of a novel substrate-independent coating with spectrally selective radiative properties. By adapting the coating parameters and combining low-emitting and solar-reflective particles, along with a matrix material emitting strongly in the mid-infrared range (MIR), substrate-independent cooling below ambient temperature is achieved. Moreover, the coating is designed to be easily applicable, with a low thickness, to ensure high flexibility and scalability, making it suitable for various applications such as membrane architecture, textile roofs, or tent construction. The results show a median daytime temperature reduction (7 a.m.–7 p.m.) of 2 °C below ambient temperature on a hot summer day. [ABSTRACT FROM AUTHOR]

This paper investigates the theoretical and experimental cooling performance of textile materials utilizing radiative cooling technology. By applying Kirchhoff's law, the emissivity of surfaces is determined, revealing that materials with high transmission values can achieve comparable cooling performance to those with high reflection values. Notably, materials exhibiting moderate reflectance and transmittance in the solar range tend to absorb minimal solar radiation, thus offering high theoretical cooling performance. However, practical applications like building envelopes or clothing present challenges due to the impact of background radiation on overall cooling capacity. Despite their intrinsic cooling properties, a significant portion of solar radiation is transmitted, complicating matters as the background can significantly affect overall cooling performance. This study provides a solution that accounts for the influence of background materials. Based on spectral data, various background materials and their impact on different semi-transparent comparison materials can be considered, and cooling performance can be simulated. This enables the simulation of cooling performance for various application scenarios and facilitates comparisons between transparent, semi-transparent, and opaque textile materials. [ABSTRACT FROM AUTHOR]