Search

This paper presents an extension of industry modelling within the REMIND integrated assessment model to industry subsectors and a projection of future industry subsector activity and energy demand for different baseline scenarios for use with the REMIND model. The industry sector is the largest greenhouse-gas-emitting energy demand sector and is considered a mitigation bottleneck. At the same time, industry subsectors are heterogeneous and face distinct emission mitigation challenges. By extending the multi-region, general equilibrium integrated assessment model REMIND to an explicit representation of four industry subsectors (cement, chemicals, steel, and other industry production), along with subsector-specific carbon capture and sequestration (CCS), we are able to investigate industry emission mitigation strategies in the context of the entire energy–economy–climate system, covering mitigation options ranging from reduced demand for industrial goods, fuel switching, and electrification to endogenous energy efficiency increases and carbon capture. We also present the derivation of both activity and final energy demand trajectories for the industry subsectors for use with the REMIND model in baseline scenarios, based on short-term continuation of historic trends and long-term global convergence. The system allows for selective variation of specific subsector activity and final energy demand across scenarios and regions to create consistent scenarios for a wide range of socioeconomic drivers and scenario story lines, like the Shared Socioeconomic Pathways (SSPs).

Integrated assessment models (IAMs) are a central tool for the quantitative analysis of climate change mitigation strategies. However, due to their global, cross-sectoral and centennial scope, IAMs cannot explicitly represent the temporal and spatial details required to properly analyze the key role of variable renewable energy (VRE) in decarbonizing the power sector and enabling emission reductions through end-use electrification. In contrast, power sector models (PSMs) can incorporate high spatiotemporal resolutions but tend to have narrower sectoral and geographic scopes and shorter time horizons. To overcome these limitations, here we present a novel methodology: an iterative and fully automated soft-coupling framework that combines the strengths of a long-term IAM and a detailed PSM. The key innovation is that the framework uses the market values of power generations and the capture prices of demand flexibilities in the PSM as price signals that change the capacity and power mix of the IAM. Hence, both models make endogenous investment decisions, leading to a joint solution. We apply the method to Germany in a proof-of-concept study using the IAM REgional Model of INvestments and Development (REMIND) v3.0.0 and the PSM Dispatch and Investment Evaluation Tool with Endogenous Renewables (DIETER) v1.0.2 and confirm the theoretical prediction of almost-full convergence in terms of both decision variables and (shadow) prices. At the end of the iterative process, the absolute model difference between the generation shares of any generator type for any year is < 5 % for a simple configuration (no storage, no flexible demand) under a “proof-of-concept” baseline scenario and 6 %–7 % for a more realistic and detailed configuration (with storage and flexible demand). For the simple configuration, we mathematically show that this coupling scheme corresponds uniquely to an iterative mapping of the Lagrangians of two power sector optimization problems of different time resolutions, which can lead to a comprehensive model convergence of both decision variables and (shadow) prices. The remaining differences in the two models can be explained by a slight mismatch between the standing capacities in the real world and optimal modeling solutions based purely on cost competition. Since our approach is based on fundamental economic principles, it is also applicable to other IAM–PSM pairs.

This paper presents the new and now open-source version 2.1 of the REgional Model of INvestments and Development (REMIND). REMIND, as an integrated assessment model (IAM), provides an integrated view of the global energy–economy–emissions system and explores self-consistent transformation pathways. It describes a broad range of possible futures and their relation to technical and socio-economic developments as well as policy choices. REMIND is a multiregional model incorporating the economy and a detailed representation of the energy sector implemented in the General Algebraic Modeling System (GAMS). It uses non-linear optimization to derive welfare-optimal regional transformation pathways of the energy-economic system subject to climate and sustainability constraints for the time horizon from 2005 to 2100. The resulting solution corresponds to the decentralized market outcome under the assumptions of perfect foresight of agents and internalization of external effects. REMIND enables the analyses of technology options and policy approaches for climate change mitigation with particular strength in representing the scale-up of new technologies, including renewables and their integration in power markets. The REMIND code is organized into modules that gather code relevant for specific topics. Interaction between different modules is made explicit via clearly defined sets of input and output variables. Each module can be represented by different realizations, enabling flexible configuration and extension. The spatial resolution of REMIND is flexible and depends on the resolution of the input data. Thus, the framework can be used for a variety of applications in a customized form, balancing requirements for detail and overall runtime and complexity.

Anthropogenic increases in atmospheric greenhouse gas concentrations are the main driver of current and future climate change. The integrated assessment community has quantified anthropogenic emissions for the shared socio-economic pathway (SSP) scenarios, each of which represents a different future socio-economic projection and political environment. Here, we provide the greenhouse gas concentrations for these SSP scenarios – using the reduced-complexity climate–carbon-cycle model MAGICC7.0. We extend historical, observationally based concentration data with SSP concentration projections from 2015 to 2500 for 43 greenhouse gases with monthly and latitudinal resolution. CO2 concentrations by 2100 range from 393 to 1135 ppm for the lowest (SSP1-1.9) and highest (SSP5-8.5) emission scenarios, respectively. We also provide the concentration extensions beyond 2100 based on assumptions regarding the trajectories of fossil fuels and land use change emissions, net negative emissions, and the fraction of non-CO2 emissions. By 2150, CO2 concentrations in the lowest emission scenario are approximately 350 ppm and approximately plateau at that level until 2500, whereas the highest fossil-fuel-driven scenario projects CO2 concentrations of 1737 ppm and reaches concentrations beyond 2000 ppm by 2250. We estimate that the share of CO2 in the total radiative forcing contribution of all considered 43 long-lived greenhouse gases increases from 66 % for the present day to roughly 68 % to 85 % by the time of maximum forcing in the 21st century. For this estimation, we updated simple radiative forcing parameterizations that reflect the Oslo Line-By-Line model results. In comparison to the representative concentration pathways (RCPs), the five main SSPs (SSP1-1.9, SSP1-2.6, SSP2-4.5, SSP3-7.0, and SSP5-8.5) are more evenly spaced and extend to lower 2100 radiative forcing and temperatures. Performing two pairs of six-member historical ensembles with CESM1.2.2, we estimate the effect on surface air temperatures of applying latitudinally and seasonally resolved GHG concentrations. We find that the ensemble differences in the March–April–May (MAM) season provide a regional warming in higher northern latitudes of up to 0.4 K over the historical period, latitudinally averaged of about 0.1 K, which we estimate to be comparable to the upper bound (∼5 % level) of natural variability. In comparison to the comparatively straight line of the last 2000 years, the greenhouse gas concentrations since the onset of the industrial period and this studies' projections over the next 100 to 500 years unequivocally depict a “hockey-stick” upwards shape. The SSP concentration time series derived in this study provide a harmonized set of input assumptions for long-term climate science analysis; they also provide an indication of the wide set of futures that societal developments and policy implementations can lead to – ranging from multiple degrees of future warming on the one side to approximately 1.5 ∘C warming on the other.

Both climate-change damages and climate-change mitigation will incur economic costs. While the risk of severe damages increases with the level of global warming (Dell et al., 2014; IPCC, 2014b, 2018; Lenton et al., 2008), mitigating costs increase steeply with more stringent warming limits (IPCC, 2014a; Luderer et al., 2013; Rogelj et al., 2015). Here, we show that the global warming limit that minimizes this century's total economic costs of climate change lies between 1.9 and 2 ∘C, if temperature changes continue to impact national economic growth rates as observed in the past and if instantaneous growth effects are neither compensated nor amplified by additional growth effects in the following years. The result is robust across a wide range of normative assumptions on the valuation of future welfare and inequality aversion. We combine estimates of climate-change impacts on economic growth for 186 countries (applying an empirical damage function from Burke et al., 2015) with mitigation costs derived from a state-of-the-art energy–economy–climate model with a wide range of highly resolved mitigation options (Kriegler et al., 2017; Luderer et al., 2013, 2015). Our purely economic assessment, even though it omits non-market damages, provides support for the international Paris Agreement on climate change. The political goal of limiting global warming to “well below 2 degrees” is thus also an economically optimal goal given above assumptions on adaptation and damage persistence.

We present a suite of nine scenarios of future emissions trajectories of anthropogenic sources, a key deliverable of the ScenarioMIP experiment within CMIP6. Integrated assessment model results for 14 different emissions species and 13 emissions sectors are provided for each scenario with consistent transitions from the historical data used in CMIP6 to future trajectories using automated harmonization before being downscaled to provide higher emissions source spatial detail. We find that the scenarios span a wide range of end-of-century radiative forcing values, thus making this set of scenarios ideal for exploring a variety of warming pathways. The set of scenarios is bounded on the low end by a 1.9 W m−2 scenario, ideal for analyzing a world with end-of-century temperatures well below 2 ∘C, and on the high end by a 8.5 W m−2 scenario, resulting in an increase in warming of nearly 5 ∘C over pre-industrial levels. Between these two extremes, scenarios are provided such that differences between forcing outcomes provide statistically significant regional temperature outcomes to maximize their usefulness for downstream experiments within CMIP6. A wide range of scenario data products are provided for the CMIP6 scientific community including global, regional, and gridded emissions datasets.

Deep convection induced by large forest fires is an efficient mechanism for transport of aerosol particles and trace gases into the upper troposphere and lower stratosphere (UT/LS). For many pyro-cumulonimbus clouds (pyroCbs) as well as other cases of severe convection without fire forcing, radiometric observations of cloud tops in the thermal infrared (IR) reveal characteristic structures, featuring a region of relatively high brightness temperatures (warm center) surrounded by a U-shaped region of low brightness temperatures. We performed a numerical simulation of a specific case study of pyroCb using a non-hydrostatic cloud resolving model with a two-moment cloud microphysics parameterization and a prognostic turbulence scheme. The model is able to reproduce the thermal IR structure as observed from satellite radiometry. Our findings establish a close link between the observed temperature pattern and small-scale mixing processes atop and downwind of the overshooting dome of the pyroCb. Such small-scale mixing processes are strongly enhanced by the formation and breaking of a stationary gravity wave induced by the overshoot. They are found to increase the stratospheric penetration of the smoke by up to almost 30 K and thus are of major significance for irreversible transport of forest fire smoke into the lower stratosphere.

A fire storm that occurred on 28 May 2001 and devastated the town of Chisholm, ~150 km north of Edmonton, Alberta, induced a violent fire-invigorated cumulonimbus cloud. This pyro-cumulonimbus (pyro-Cb) had overshooting tops of 2.5–3 km above the tropopause, and injected massive amounts of smoke into the lower stratosphere. Fortunately, this event occurred under good coverage of radar, rain gauge, lightning and satellite measurements, which allowed in-depth documentation of the event, and gave us an opportunity to study the cloud top morphology and microstructure, precipitation and cloud electrification of the pyro-Cb. The combination of heat and smoke created a cloud with extremely small drops, which ascended rapidly in violent updrafts. There appeared to be little freezing up to the homogeneous freezing isotherm level of −38°C. A cloud with such small and short-lived highly supercooled drops is incapable of producing precipitation except for few large graupel and hail, which produced the observed radar echoes and charged the cloud with positive lightning. The small cloud drops froze homogeneously to equally small ice particles, for which there is no mechanism to aggregate into precipitation particles, and which hence remain in the anvil. The lack of significant precipitation implies that only a small fraction of the smoke is scavenged, so that most of it is exhausted through the anvil to the upper troposphere and lower stratosphere. Comparisons with other cases suggest that a pyro-Cb does not have to be as violent as the Chisholm case for precipitation to be strongly suppressed. However, this level of convective vigor is necessary to create the overshooting updraft that injects the smoke into the lower stratosphere.

Wildland fires in boreal regions have the potential to initiate deep convection, so-called pyro-convection, due to their release of sensible heat. Under favorable atmospheric conditions, large fires can result in pyro-convection that transports the emissions into the upper troposphere and the lower stratosphere. Here, we present three-dimensional model simulations of the injection of fire emissions into the lower stratosphere by pyro-convection. These model simulations are constrained and evaluated with observations obtained from the Chisholm fire in Alberta, Canada, in 2001. The active tracer high resolution atmospheric model (ATHAM) is initialized with observations obtained by radiosonde. Information on the fire forcing is obtained from ground-based observations of the mass and moisture of the burned fuel. Based on radar observations, the pyro-convection reached an altitude of about 13 km, well above the tropopause, which was located at about 11.2 km. The model simulation yields a similarly strong convection with an overshoot of the convection above the tropopause. The main outflow from the pyro-convection occurs at about 10.6 km, but a significant fraction (about 8%) of the emitted mass of the smoke aerosol is transported above the tropopause. In contrast to regular convection, the region with maximum updraft velocity in the pyro-convection is located close to the surface above the fire. This results in high updraft velocities >10 m s−1 at cloud base. The temperature anomaly in the plume decreases rapidly with height from values above 50 K at the fire to about 5 K at about 3000 m above the fire. While the sensible heat released from the fire is responsible for the initiation of convection in the model, the release of latent heat from condensation and freezing dominates the overall energy budget. Emissions of water vapor from the fire do not significantly contribute to the energy budget of the convection.

The Chisholm forest fire that burned in Alberta, Canada, in May 2001 resulted in injection of substantial amounts of smoke into the lower stratosphere. We used the cloud-resolving plume model ATHAM (Active Tracer High resolution Atmospheric Model) to investigate the importance of different contributing factors to the severe intensification of the convection induced by the Chisholm fire and the subsequent injection of biomass smoke into the lower stratosphere. The simulations show strong sensitivity of the pyro-convection to background meteorology. This explains the observed coincidence of the convective blow-up of the fire plume and the passage of a synoptic cold front. Furthermore, we performed model sensitivity studies to the rate of release of sensible heat and water vapor from the fire. The release of sensible heat by the fire plays a dominant role for the dynamic development of the pyro-cumulonimbus cloud (pyroCb) and the height to which smoke is transported. The convection is very sensitive to the heat flux from the fire. The emissions of water vapor play a less significant role for the injection height but enhance the amount of smoke transported beyond the tropopause level. The aerosol burden in the plume has a strong impact on the microphysical structure of the resulting convective cloud. The dynamic evolution of the pyroCb, however, is only weakly sensitive to the abundance of cloud condensation nuclei (CCN) from the fire. In contrast to previous findings by other studies of convective clouds, we found that fire CCN have a negative effect on the convection dynamics because they give rise to a delay in the freezing of cloud droplets. Even in a simulation without fire CCN, there is no precipitation formation within the updraft region of the pyroCb. Enhancement of convection by aerosols as reported from studies of other cases of convection is therefore not found in our study.

In this study, we analyze the effects of technology availability, political coordination, and behavioral change on transformation pathways toward net-zero greenhouse gas emissions in the European Union by 2050. We implemented an iterative stakeholder dialogue to co-design the scenarios that were calculated using a global multi-regional energy-economy-land-climate model. We find that in scenarios without behavioral change and with restriction of technologies, the target of greenhouse gas neutrality in the European Union cannot be reached. Already a target of 200 Mt CO 2 eq/yr requires CO 2 prices above 100 €/tCO 2 in 2030 across all sectors in all scenarios. The required CO 2 price can increase to up to 450 €/tCO 2 by 2030 if technologies are constrained, if no complementary regulatory measures are implemented, and if changes in consumer behavior towards a more sustainable lifestyle do not materialize., (© 2024. The Author(s).)

A transition to healthy diets such as the EAT-Lancet Planetary Health Diet could considerably reduce greenhouse gas (GHG) emissions. However, the specific contributions of dietary shifts for the feasibility of 1.5°C pathways remain unclear. Here, we use the open-source integrated assessment modeling (IAM) framework REMIND-MAgPIE to compare 1.5°C pathways with and without dietary shifts. We find that a flexitarian diet increases the feasibility of the Paris Agreement climate goals in different ways: The reduction of GHG emissions related to dietary shifts, especially methane from ruminant enteric fermentation, increases the 1.5°C compatible carbon budget. Therefore, dietary shifts allow to achieve the same climate outcome with less carbon dioxide removal (CDR) and less stringent CO 2 emission reductions in the energy system, which reduces pressure on GHG prices, energy prices, and food expenditures.

Current National Determined Contributions require strengthening to achieve the 2-degree target set in the Paris Agreement. Here, we contrast two mitigation effort strengthening ideas: the "burden-sharing" principle, which requires each region to meet the mitigation goal through domestic mitigation with no international cooperation, and the cooperation focused "cost effective conditional-enhancing" principle, which combines domestic mitigation with carbon trading and low-carbon investment transfer. By applying a burden-sharing model covering several equity principles, we analyze the 2030 mitigation burden for each region, then the energy system model generates the results for the carbon trade and the investment transfer for the conditional-enhancing plan, and an air pollution cobenefit model is used to analyze the cobenefit on air quality and public health. Here, we show that the conditional-enhancing plan leads to an international carbon trading volume of 339.2 billion USD per year and reduces the marginal mitigation cost of the quota-purchase regions by 25%-32%. Furthermore, the international cooperation incentivizes a faster and deeper decarbonization in developing and emerging regions, raising the air pollution health cobenefits by 18% to 731,000 avoided premature deaths annually compared to the "burden-sharing" principle, amounting to a reduction in the life value loss of 131 billion dollars per year.

Achieving net-zero CO 2 emissions has become the explicitgoal of many climate-energy policies around the world. Although many studies have assessed net-zero emissions pathways, the common features and tradeoffs of energy systems across global scenarios at the point of net-zero CO 2 emissions have not yet been evaluated. Here, we examine the energy systems of 177 net-zero scenarios and discuss their long-term technological and regional characteristics in the context of current energy policies. We find that, on average, renewable energy sources account for 60% of primary energy at net-zero (compared to ∼14% today), with slightly less than half of that renewable energy derived from biomass. Meanwhile, electricity makes up approximately half of final energy consumed (compared to ∼20% today), highlighting the extent to which solid, liquid, and gaseous fuels remain prevalent in the scenarios even when emissions reach net-zero. Finally, residual emissions and offsetting negative emissions are not evenly distributed across world regions, which may have important implications for negotiations on burden-sharing, human development, and equity., (© 2021. The Author(s).)

The large majority of climate change mitigation scenarios that hold warming below 2 °C show high deployment of carbon dioxide removal (CDR), resulting in a peak-and-decline behavior in global temperature. This is driven by the assumption of an exponentially increasing carbon price trajectory which is perceived to be economically optimal for meeting a carbon budget. However, this optimality relies on the assumption that a finite carbon budget associated with a temperature target is filled up steadily over time. The availability of net carbon removals invalidates this assumption and therefore a different carbon price trajectory should be chosen. We show how the optimal carbon price path for remaining well below 2 °C limits CDR demand and analyze requirements for constructing alternatives, which may be easier to implement in reality. We show that warming can be held at well below 2 °C at much lower long-term economic effort and lower CDR deployment and therefore lower risks if carbon prices are high enough in the beginning to ensure target compliance, but increase at a lower rate after carbon neutrality has been reached.

The Paris Agreement calls for a cooperative response with the aim of limiting global warming to well below two degrees Celsius above pre-industrial levels while reaffirming the principles of equity and common, but differentiated responsibilities and capabilities 1 . Although the goal is clear, the approach required to achieve it is not. Cap-and-trade policies using uniform carbon prices could produce cost-effective reductions of global carbon emissions, but tend to impose relatively high mitigation costs on developing and emerging economies. Huge international financial transfers are required to complement cap-and-trade to achieve equal sharing of effort, defined as an equal distribution of mitigation costs as a share of income 2,3 , and therefore the cap-and-trade policy is often perceived as infringing on national sovereignty 2-7 . Here we show that a strategy of international financial transfers guided by moderate deviations from uniform carbon pricing could achieve the goal without straining either the economies or sovereignty of nations. We use the integrated assessment model REMIND-MAgPIE to analyse alternative policies: financial transfers in uniform carbon pricing systems, differentiated carbon pricing in the absence of financial transfers, or a hybrid combining financial transfers and differentiated carbon prices. Under uniform carbon prices, a present value of international financial transfers of 4.4 trillion US dollars over the next 80 years to 2100 would be required to equalize effort. By contrast, achieving equal effort without financial transfers requires carbon prices in advanced countries to exceed those in developing countries by a factor of more than 100, leading to efficiency losses of 2.6 trillion US dollars. Hybrid solutions reveal a strongly nonlinear trade-off between cost efficiency and sovereignty: moderate deviations from uniform carbon prices strongly reduce financial transfers at relatively small efficiency losses and moderate financial transfers substantially reduce inefficiencies by narrowing the carbon price spread. We also identify risks and adverse consequences of carbon price differentiation due to market distortions that can undermine environmental sustainability targets 8,9 . Quantifying the advantages and risks of carbon price differentiation provides insight into climate and sector-specific policy mixes.

Many countries have implemented national climate policies to accomplish pledged Nationally Determined Contributions and to contribute to the temperature objectives of the Paris Agreement on climate change. In 2023, the global stocktake will assess the combined effort of countries. Here, based on a public policy database and a multi-model scenario analysis, we show that implementation of current policies leaves a median emission gap of 22.4 to 28.2 GtCO 2 eq by 2030 with the optimal pathways to implement the well below 2 °C and 1.5 °C Paris goals. If Nationally Determined Contributions would be fully implemented, this gap would be reduced by a third. Interestingly, the countries evaluated were found to not achieve their pledged contributions with implemented policies (implementation gap), or to have an ambition gap with optimal pathways towards well below 2 °C. This shows that all countries would need to accelerate the implementation of policies for renewable technologies, while efficiency improvements are especially important in emerging countries and fossil-fuel-dependent countries.

A rapid and deep decarbonization of power supply worldwide is required to limit global warming to well below 2 °C. Beyond greenhouse gas emissions, the power sector is also responsible for numerous other environmental impacts. Here we combine scenarios from integrated assessment models with a forward-looking life-cycle assessment to explore how alternative technology choices in power sector decarbonization pathways compare in terms of non-climate environmental impacts at the system level. While all decarbonization pathways yield major environmental co-benefits, we find that the scale of co-benefits as well as profiles of adverse side-effects depend strongly on technology choice. Mitigation scenarios focusing on wind and solar power are more effective in reducing human health impacts compared to those with low renewable energy, while inducing a more pronounced shift away from fossil and toward mineral resource depletion. Conversely, non-climate ecosystem damages are highly uncertain but tend to increase, chiefly due to land requirements for bioenergy.

We explore the feasibility of limiting global warming to 1.5°C without overshoot and without the deployment of carbon dioxide removal (CDR) technologies. For this purpose, we perform a sensitivity analysis of four generic emissions reduction measures to identify a lower bound on future CO 2 emissions from fossil fuel combustion and industrial processes. Final energy demand reductions and electrification of energy end uses as well as decarbonization of electricity and non-electric energy supply are all considered. We find the lower bound of cumulative fossil fuel and industry CO 2 emissions to be 570 GtCO 2 for the period 2016-2100, around 250 GtCO 2 lower than the lower end of available 1.5°C mitigation pathways generated with integrated assessment models. Estimates of 1.5°C-consistent CO 2 budgets are highly uncertain and range between 100 and 900 GtCO 2 from 2016 onwards. Based on our sensitivity analysis, limiting warming to 1.5°C will require CDR or terrestrial net carbon uptake if 1.5°C-consistent budgets are smaller than 650 GtCO 2 The earlier CDR is deployed, the more it neutralizes post-2020 emissions rather than producing net negative emissions. Nevertheless, if the 1.5°C budget is smaller than 550 GtCO 2 , temporary overshoot of the 1.5°C limit becomes unavoidable if CDR cannot be ramped up faster than to 4 GtCO 2 in 2040 and 10 GtCO 2 in 2050.This article is part of the theme issue 'The Paris Agreement: understanding the physical and social challenges for a warming world of 1.5°C above pre-industrial levels'., (© 2018 The Author(s).)

The events of March 2011 at the nuclear power complex in Fukushima, Japan, raised questions about the safe operation of nuclear power plants, with early retirement of existing nuclear power plants being debated in the policy arena and considered by regulators. Also, the future of building new nuclear power plants is highly uncertain. Should nuclear power policies become more restrictive, one potential option for climate change mitigation will be less available. However, a systematic analysis of nuclear power policies, including early retirement, has been missing in the climate change mitigation literature. We apply an energy economy model framework to derive scenarios and analyze the interactions and tradeoffs between these two policy fields. Our results indicate that early retirement of nuclear power plants leads to discounted cumulative global GDP losses of 0.07% by 2020. If, in addition, new nuclear investments are excluded, total losses will double. The effect of climate policies imposed by an intertemporal carbon budget on incremental costs of policies restricting nuclear power use is small. However, climate policies have much larger impacts than policies restricting the use of nuclear power. The carbon budget leads to cumulative discounted near term reductions of global GDP of 0.64% until 2020. Intertemporal flexibility of the carbon budget approach enables higher near-term emissions as a result of increased power generation from natural gas to fill the emerging gap in electricity supply, while still remaining within the overall carbon budget. Demand reductions and efficiency improvements are the second major response strategy.