Search

In this paper, a submillimetric/THz metasurface polarization/oblique independent absorber is designed and characterized. The absorber is designed using a periodic arrangement of a modified split ring resonator unit cell. The symmetric absorber is insensitive to the variation of incident angles and polarization angles. The results confirm that perfect absorption is achieved (close to 100%) for either TM or TE polarization at 300 GHz. Moreover, the absorber is efficient for normal and oblique incident angle (above 90% for 45° angle of incidence). In all the presented cases, the full width half maximum bandwidth is 20 GHz. The absorber unit cell size is only 0.0052 λ0 × 0.0052 λ0 and it has a low-profile thickness = 0.0002 λ0, at the operating frequency. Also, an absorber-based biosensor is presented. The sensing has proved the coating analyte thickness can be detected by shifting the absorption frequency. The maximum sensitivity is 24.9% RIU−1 with a low-profile maximum of 50 µm thickness. Analytical formulas for the frequency shift have been extracted. The presented results are discussed based on 3D full-wave EM simulations. [ABSTRACT FROM AUTHOR]

This paper presents a printed multiple-input multiple-output (MIMO) antenna with the advantages of compact size, good MIMO diversity performance and simple geometry for fifth-generation (5G) millimeter-wave (mm-Wave) applications. The antenna offers a novel Ultra-Wide Band (UWB) operation from 25 to 50 GHz, using a Defective Ground Structure (DGS) technology. Firstly, its compact size makes it suitable for integrating different telecommunication devices for various applications, with a prototype fabricated having a total size of 33 mm × 33 mm × 0.233 mm. Second, the mutual coupling between the individual elements severely impacts the diversity properties of the MIMO antenna system. An effective technique of orthogonally positioning the antenna elements to each other increased their isolation; thus, the MIMO system provides the best diversity performance. The performance of the proposed MIMO antenna was investigated in terms of S-parameters and MIMO diversity parameters to ensure its suitability for future 5G mm-Wave applications. Finally, the proposed work was verified by measurements and exhibited a good match between simulated and measured results. It achieves UWB, high isolation, low mutual coupling, and good MIMO diversity performance, making it a good candidate and seamlessly housed in 5G mm-Wave applications. [ABSTRACT FROM AUTHOR]

In this paper, the time domain analysis of an Ultra Wide Band antenna flexible circular monopole antenna is presented. The antenna is fabricated on liquid crystalline polymer flexible substrate with a compact geometry that makes it suitable for wearable applications under different bending conditions. The antenna is fed by coplanar waveguide transmission line and has a compact total size of 40 × 22 mm 2 . Moreover, the antenna has good radiation efficiency (97%) over the bandwidth. The presented antenna has a good performance over the operating spectrum for straight and bending configurations. The design principals along with simulation and experimental results are presented in this contribution. [ABSTRACT FROM AUTHOR]