Search

Countless inorganic materials are prepared via high temperature solid-state reaction of mixtures of reagents powders. Understanding and controlling the phenomena that limit these solid-state reactions is crucial to designing reactions for new materials synthesis. Here, focusing on topotactic ion-exchange between NaFeO

High-energy batteries for automotive applications require cells to endure well over a decade of constant use, making their long-term stability paramount. This is particularly challenging for emerging cell chemistries containing silicon, for which extended testing information is scarce. While much of the research on silicon anodes has focused on mitigating the consequences of volume changes during cycling, comparatively little is known about the time-dependent degradation of silicon-containing batteries. Here we discuss a series of studies on the reactivity of silicon that, collectively, paint a picture of how the chemistry of silicon exacerbates the calendar aging of lithium-ion cells. Assessing and mitigating this shortcoming should be the focus of future research to fully realize the benefits of this battery technology. Silicon-containing batteries are increasingly becoming a reality in the mass market, but their calendar aging behaviours have received comparatively little attention. Researchers from the Silicon Consortium Project discuss the issues surrounding the calendar lifetime of silicon anodes for lithium-ion batteries.

The performance of single-ion conductors is highly sensitive to the material's defect chemistry. Tuning these defects is limited for solid-state reactions as they occur at particle-particle interfaces, which provide a complex evolving energy landscape for atomic rearrangement and product formation. In this report, we investigate the (1) order of addition and (2) lithium precursor decomposition temperature and their effect on the synthesis and grain boundary conductivity of the perovskite lithium lanthanum titanium oxide (LLTO). We use an intimately mixed sol-gel, a solid-state reaction of Li precursor + La2O3 + TiO2, and Li precursor + amorphous La0.57TiOx as different chemical routes to change the way in which the elements are brought together. The results show that the perovskite can accommodate a wide range of Li deficiencies (upward of 50%) while maintaining the tetragonal LLTO structure, indicating that X-ray diffraction (XRD) is insufficient to fully characterize the chemical nature of the product (i.e., Li-deficient LLTO may behave differently than stoichiometric LLTO). Variations in the relative intensities of different reflections in XRD suggest variations in the La ordering within the crystal structure between synthesis methods. Furthermore, the choice of the precursor and the order of addition of the reactants lower the time required to form a pure phase. Density functional theory calculations of the formation energy of possible reaction intermediates support the hypothesis that a greater thermodynamic driving force to form LLTO leads to a greater LLTO yield. The retention of lithium is correlated with the thermal decomposition temperature of the Li precursor and the starting material mixing strategy. Taking the results together suggests that cations that share a site with Li should be mixed early to avoid ordering. Such cation ordering inhibits Li motion, leading to higher Li ion resistance.

In this work, we modified the reaction pathway to quickly (minutes) incorporate lithium and stabilize the ionic conducting garnet phase by decoupling the formation of a La-Zr-O network from the addition of lithium. To do this, we synthesized La2Zr2O7 (LZO) nanoparticles to which LiNO3 was added. This method is a departure from typical solid-state synthesis methods that require high-energy milling to promote mixing and intimate particle-particle contact and from sol-gel syntheses as a unique porous microstructure is obtained. We show that the reaction time is limited by the rate of nitrate decomposition and that this method produces a porous high-Li-ion-conducting cubic phase, within an hour, that may be used as a starting structure for a composite electrolyte.

This work probes the slurry architecture of a high silicon content electrode slurry with and without low molecular weight polymeric dispersants as a function of shear rate to mimic electrode casting conditions for poly(acrylic acid) (PAA) and lithium neutralized poly(acrylic acid) (LiPAA) based electrodes. Rheology coupled ultra-small angle neutron scattering (rheo-USANS) was used to examine the aggregation and agglomeration behavior of each slurry as well as the overall shape of the aggregates. The addition of dispersant has opposing effects on slurries made with PAA or LiPAA binder. With a dispersant, there are fewer aggregates and agglomerates in the PAA based silicon slurries, while LiPAA based silicon slurries become orders of magnitude more aggregated and agglomerated at all shear rates. The reorganization of the PAA and LiPAA binder in the presence of dispersant leads to a more homogeneous slurry and a more heterogeneous slurry, respectively. This reorganization ripples through to the cast electrode architecture and is reflected in the electrochemical cycling of these electrodes.

This work explores the complex interplay between slurry aggregation, agglomeration, and conformation (i.e., shape) of poly(acrylic acid) (PAA)- and lithiated PAA-based silicon slurries as a functio...

Pit corrosion of Li during stripping is an important factor responsible for poor Li cycling efficiency, a metric that determines its cycling life. When excess Li is present, it has been observed that Li tends to strip in a non-uniform fashion, forming pits that extend well past the theoretical Li depth that inevitably lead to the formation of electronically isolated “dead” Li particles. In this work, a novel cell with replenishable Li is shown to inherently mitigate the formation of this “dead” Li, as a direct result of a design in which the intrinsically more homogenous stripping behavior of anode-free cells are combined with a replenishable limited Li reservoir. These novel cells (Li|Cu||LiFePO4) exhibit 25% and 34% higher cumulative capacities than the conventional cells (Cu|Li||LiFePO4) in carbonate and ether electrolytes, respectively, enabling a significant increase in cycle life without impacting energy density. This improvement strategy represents a new direction in Li metal battery improvement, in which improved cycling can be achieved regardless of electrolyte chemistry.

Protective Polymer Coatings (PPCs) have been proposed to protect lithium metal anodes in rechargeable batteries to stabilize the Li/electrolyte interface and to extend the cycle life by reducing parasitic reactions and improving the lithium deposition morphology. However, the ion transport mechanism in PPCs remains unclear. Specifically, the degree of polymer swelling in the electrolyte and the influence of polymer/solvent/ion interactions are never quantified. Here we use poly(acrylonitrile-co-butadiene) (PAN–PBD) with controlled cross-link densities to quantify how the swelling ratio of the PPC affects conductivity, Li+ ion selectivity, activation energy, and rheological properties. The large difference in polarities between PAN (polar) and PBD (non-polar) segments allows the comparison of PPC properties when swollen in carbonate (high polarity) and ether (low polarity) electrolytes, which are the two most common classes of electrolytes. We find that a low swelling ratio of the PPC increases the transference number of Li+ ions while decreasing the conductivity. The activation energy only increases when the PPC is swollen in the carbonate electrolyte because of the strong ion–dipole interaction in the PAN phase, which is absent in the non-polar PBD phase. Theoretical models using Hansen solubility parameters and a percolation model have been shown to be effective in predicting the swelling behavior of PPCs in organic solvents and to estimate the conductivity. The trade-off between conductivity and the transference number is the primary challenge for PPCs. Our study provides general guidelines for PPC design, which favors the use of non-polar polymers with low polarity organic electrolytes., Protective Polymer Coatings (PPCs) protect lithium metal anodes in rechargeable batteries to stabilize the Li/electrolyte interface and to extend the cycle life by reducing parasitic reactions and improving the lithium deposition morphology.

X-ray photon correlation spectroscopy (XPCS) microrheology and conventional bulk rheology were performed on silica nanoparticle dispersions associated with battery electrolyte applications to probe the properties of these specific complex materials and to explore the utility of XPCS microrheology in characterizing nanoparticle dispersions. Sterically stabilized shear-thickening electrolytes were synthesized by grafting poly(methyl methacrylate) chains onto silica nanoparticles. Coated silica dispersions containing 5-30 wt % nanoparticles dispersed in propylene carbonate were studied. In general, both XPCS microrheology and conventional rheology showed that coated silica dispersions were more viscous at higher concentrations, as expected. The complex viscosity of coated silica dispersions showed shear-thinning behavior over the frequency range probed by XPCS measurements. However, measurements using conventional mechanical rheometry yielded a shear viscosity with weak shear-thickening behavior for dispersions with the highest concentration of 30% particles. Our results indicate that there is a critical concentration needed for shear-thickening behavior, as well as appropriate particle size and surface polymer chain length, for this class of nanoparticle-based electrolytes. The results of this study can provide insights for comparing XPCS microrheology and bulk rheology for related complex fluids and whether XPCS microrheology can capture expected macroscopic rheological properties by probing small-scale particle dynamics.

A novel solid-state synthetic approach has been developed for the generation of conjugated nanoporous polymer networks. Using mechanochemical-assisted oxidative coupling polymerization, we demonstrated a rapid and solvent-free synthesis of conjugated polycarbazoles with high porosities and promising CO2 storage abilities. This innovative approach constitutes a new direction for the development of novel nanoporous polymer frameworks through sustainable solid-state assembly pathways, and may open up new possibilities for the rational design and synthesis of nanoporous materials for carbon capture.

The impact of the binding, solution structure, and solution dynamics of poly(vinylidene fluoride) (PVDF) with silicon on its performance as compared to traditional graphite and Li

Li phosphorus oxynitride (LiPON) is one of a very few solid electrolytes that have demonstrated high stability against Li metal and extended cyclability with high Coulombic efficiency for all solid-state batteries (ASSBs). However, theoretical calculations show that LiPON reacts with Li metal. Here, we utilize in situ electron microscopy to observe the dynamic evolutions at the LiPON-Li interface upon contacting and under biasing. We reveal that a thin interface layer (∼60 nm) develops at the LiPON-Li interface upon contact. This layer is composed of conductive binary compounds that show a unique spatial distribution that warrants an electrochemical stability of the interface, serving as an effective passivation layer. Our results explicate the excellent cyclability of LiPON and reconcile the existing debates regarding the stability of the LiPON-Li interface, demonstrating that, though glassy solid electrolytes may not have a perfect initial electrochemical window with Li metal, they may excel in future applications for ASSBs.

Supported ruthenium based materials are active for the catalytic hydrogenation of biomass-derived molecules. However, such catalysts still have problems regarding deactivation coming from Ru leaching and particles aggregation. In this work we demonstrate that spatial restriction on metal nanoparticles limits aggregation and eliminates performance losses upon subsequent testing. We synthesized and compared Ru supported on activated (Ru/AC) or mesoporous carbon (Ru/MC). Electron tomography characterization showed preferential Ru location depending on the material porosity; Ru nanoparticles were located inside mesoporous carbon pores and showed narrower size distribution. In catalytic reactions, Ru/MC reached the complete conversion of levulinic acid with the 96% selectivity to γ-valerolactone while it converted 74% of glycerol compared to the 34% showed by Ru/AC. The Ru/AC materials deactivated after 1 catalytic cycle, however the Ru/MC maintained constant activity for multiple catalytic cycles.

Graphite has become a critical material because of its high supply risk and essential applications in energy industries. Its present synthesis still relies on an energy-intensive thermal treatment pathway (Acheson process) at about 3000 °C. Herein, a mechanochemical approach is demonstrated to afford highly crystalline graphite nanosheets at ambient temperature. The key to the success of our methodology lies in the successive decomposition and rearrangement of a carbon nitride framework driven by a denitriding reaction in the presence of magnesium. The afforded graphite features high crystallinity, a high degree of graphitization, a thin nanosheet architecture, and a small flake size, which endow it with superior efficiency in lithium-ion batteries as an anode material in terms of rate capacity and cycle stability. The mild and cost-effective pathway used in this study could be a promising alternative for graphite production.

In the synthesis of complex oxides, solid-state metathesis provides low-temperature reactions where product selectivity can be achieved through simple changes in precursor composition. The influence of precursor structure, however, is less understood in solid-state synthesis. Here we present the ternary metathesis reaction (LiMnO2 + YOCl → YMnO3 + LiCl) to target two yttrium manganese oxide products, hexagonal and orthorhombic YMnO3, when starting from three different LiMnO2 precursors. Using temperature-dependent synchrotron X-ray and neutron diffraction, we identify the relevant intermediates and temperature regimes of reactions along the pathway to YMnO3. Manganese-containing intermediates undergo a charge disproportionation into a reduced Mn(II,III) tetragonal spinel and oxidized Mn(III,IV) cubic spinel, which lead to hexagonal and orthorhombic YMnO3, respectively. Density functional theory calculations confirm that the presence of Mn(IV) caused by a small concentration of cation vacancies (∼2.2%) in YMnO3 stabilizes the orthorhombic polymorph over the hexagonal. Reactions over the course of 2 weeks yield o-YMnO3 as the majority product at temperatures below 600 °C, which supports an equilibration of cation defects over time. Controlling the composition and structure of these defect-accommodating intermediates provides new strategies for selective synthesis of complex oxides at low temperatures.

This work focuses on the mechanisms of interfacial processes at the surface of amorphous silicon thin-film electrodes in organic carbonate electrolytes to unveil the origins of the inherent nonpassivating behavior of silicon anodes in Li-ion batteries. Attenuated total reflection Fourier-transform infrared spectroscopy, X-ray absorption spectroscopy, and infrared near-field scanning optical microscopy were used to investigate the formation, evolution, and chemical composition of the surface layer formed on Si upon cycling. We found that the chemical composition and thickness of the solid/electrolyte interphase (SEI) layer continuously change during the charging/discharging cycles. This SEI layer "breathing" effect is directly related to the formation of lithium ethylene dicarbonate (LiEDC) and LiPF6 salt decomposition products during silicon lithiation and their subsequent disappearance upon delithiation. The detected appearance and disappearance of LiEDC and LiPF6 decomposition compounds in the SEI layer are directly linked with the observed interfacial instability and poor passivating behavior of the silicon anode.

In this work we report a framework to understand the role of solvent-salt interactions and how they mediate the performance of sodium-air/O2 batteries. The utilization of suitable electrolyte materials remains a point of major concern within the research community, as their stability and decomposition pathways during cycling are intimately connected with capacity and cycle life. Glyme based solvents have been widely utilized in Na–O2 batteries, however, to date no clear correlation between solvent/electrolyte properties and battery performance has been given. Herein, we have examined the effect of glyme chain length (ethylene glycol dimethyl ether DME; diethylene glycol dimethyl ether, DEGDME; and tetraethylene glycol dimethyl ether, TEGME) on the cycling behaviour of Na–O2 batteries and conclude that overall cell performance is highly dependent on solvent selection, salt concentration and rate of discharge/charge. We demonstrate how solvent selection helps define cell chemistry and performance by linking salt-solvent interactions to enthalpy of dissolution - and subsequently to sodium battery electrolyte properties - through the combination of both experimental and theoretical methodologies. The approaches detailed in this study could be used to predictively prepare electrolytes for Li-air batteries, other glyme-based electrochemical systems and low temperature applications.

Silicon anodes suffer from an unstable solid electrolyte interphase (SEI) layer that contributes to undesirable capacity fade with cycling. A key part to addressing this unstable SEI formation is t...

In this work, we explore how the chemical reactivity toward an aprotic battery electrolyte changes as a function of lithium salt and silicon surface termination chemistry. The reactions are highly ...

Detailed elemental analysis is essential for a successful development and optimization of material systems and synthesis methods. This is especially relevant for Li- and Na-containing compounds, found in state-of-the-art and next-generation battery systems. Their materials’ properties and thus the final device performance strongly depend on the crystal structure, the stoichiometry, and defect chemistry, e.g., influencing charge carrier concentration and activation energies for vacancy transport. However, a detailed quantitative analysis of light elements in a heavy matrix, featuring a broad range of solubilities and vapor pressures, is often difficult and associated with large uncertainties and thus neglected in favor of just reporting the stoichiometry as “weighed in.” In this work, we report several approaches to digest and dissolve various oxide and sulfide-based materials, used in next-generation Li batteries, for elemental analysis via optical emission spectroscopy. These include the most common solid electrolytes Li-La-Ti–O, a perovskite material (LLTO), and Li-La-Zr-O which has garnet structure (LLZO). Additionally, a facile thermal digestion process is reported for a surrogate sulfide solid electrolyte (Na2S). The digestion procedures reported here are suitable for almost any laboratory environment and, when applied, will improve understanding of the synthesis-structure–property correlations needed to advanced batteries with all solid-state configurations.

In this work, we describe the design and development of an in situ neutron reflectometry cell for high temperature investigations of structural changes occurring at the interface between inorganic salts, in their molten state up to 800 °C, and corrosion resistant alloys or other surfaces. In the cell, a molten salt is confined by an annular ring of single crystal sapphire constrained between the sample substrate and a sapphire plate using two gold O-rings, enclosing a liquid salt volume of 20 ml, along with a dynamic cell volume to accommodate expansion of the liquid with heating. As a test case for the cell, we report on an in situ neutron reflectometry measurement of the interface between a eutectic salt mixture of MgCl

Alloying anodes such as silicon are of great interest for lithium-ion batteries due to their high lithium-ion storage capacities, but have only seen minimal commercial deployment due to their limited calendar life. This has been attributed to an intrinsically unstable solid electrolyte interphase (SEI) that is aggravated by mechanical failure. An amorphous structure can mitigate lithiation strains, and amorphous alloys, or metallic glasses, often exhibit exceptional fracture toughness. Additional elements can be added to metallic glasses to improve passivation. Splat quenching was utilized to prepare an amorphous Al64Si25Mn11 Li-ion anode with a specific capacity >900 mAh g-1 that remains amorphous upon cycling. On this metallic glass electrode, parasitic electrolyte reduction is found to be much reduced in comparison to pure Si or Al, and comparable to that on Cu. The SEI is much thinner, more stable, and richer in fluorinated inorganic phases than the SEI formed on Si, while organic carbonate compounds such as lithium ethylene decarbonate (LiEDC) are notably absent. This study indicates that metallic glasses can become a viable new class of Li-ion anode materials with improved surface passivity.

The performance of single-ion conductors is highly sensitive to the material's defect chemistry. Tuning these defects is limited for solid-state reactions as they occur at particle-particle interfaces, which provide a complex evolving energy landscape for atomic rearrangement and product formation. In this report, we investigate the (1) order of addition and (2) lithium precursor decomposition temperature and their effect on the synthesis and grain boundary conductivity of the perovskite lithium lanthanum titanium oxide (LLTO). We use an intimately mixed sol-gel, a solid-state reaction of Li precursor + La

The effect of UV curing and shearing on the structure and behavior of a polyimide (PI) binder as it disperses silicon particles in a battery electrode slurry was investigated. PI dispersant effectiveness increases with UV curing time, which controls the overall binder molecular weight. The shear force during electrode casting causes higher molecular weight PI to agglomerate, resulting in battery anodes with poorly dispersed Si particles that do not cycle well. It is hypothesized that when PI binder is added above a critical amount, it conformally coats the silicon particles and greatly impedes Li ion transport. There is an “interzonal region” for binder loading where it disperses silicon well and provides a coverage that facilitates Li transport through the anode material and into the silicon particles. These results have implications in ensuring reproducible electrode manufacturing and increasing cell performance by optimizing the PI structure and coordination with the silicon precursor.

We use neutron reflectometry to study how the polymeric binder, poly(acrylic acid) (PAA), affects the in situ formation and chemical composition of the solid-electrolyte interphase (SEI) formation on a silicon anode at various states of charge. The reflectivity is correlated with electrochemical quartz crystal microbalance to better understand the viscoelastic effects of the polymer during cycling. The use of model thin films allows for a well-controlled interface between the amorphous Si surface and the PAA layer. If the PAA perfectly coats the Si surface and standard processing conditions are used, the binder will prevent the lithiation of the anode. The PAA suppresses the growth of a new layer formed at early states of discharge (open circuit voltage to 0.8 V vs Li/Li

In this study, we report the stability of the layered high voltage cathode NMC622 with respect to a standard liquid electrolyte and in an all solid-state configuration. NMC622 cathodes with a (104)...

In this work we report the solid reaction products from the chemical reaction of aprotic battery electrolyte and three purported components of the Si-based anode SEI : SiO2 nanoparticles (NPs), lithium silicate (LixSiOy) powders, and Si NPs. We use FTIR and classical molecular dynamics/density functional perturbation theory to assess the solid products remaining with these model materials after exposure to electrolyte. The absence of electrochemical bias provides a view of the chemical speciation resulting from early-stage chemical reactivity during battery assembly as well as under open circuit storage conditions. We believe these species represent the initial stages of SEI growth and predict they likely drive subsequent chemical and electrochemical reactions by controlling molecular interactons at the Si active material interface. We find that nominally equivalent materials react differently even before any electrochemistry is performed (e.g., acidic SiO2 dissolves whereas alkaline SiO2 is relatively robust), and derive new understanding of the chemical species that could and could not form stable SEI components in Si-based anodes. These results can be used to inform how to passivate Si anode surfaces and potentially generate an artificially engineered SEI that would be stable and enable next-generation battery anodes.

Lithium (Li) metal has the highest theoretical capacity and is essential for energy storage technologies beyond conventional Li chemistries. However, its utilization inevitably leads to dendrite gr...

Summary We employ tip-enhanced Raman spectroscopy (TERS) to study model amorphous silicon (a-Si) thin film anodes galvanostatically cycled for different numbers. For the 1× cycled a-Si, TERS shows good correlation between solid electrolyte interphase (SEI) topography and chemical mapping, corresponding to distribution of lithium ethylene dicarbonate (LEDC) and poly (ethylene oxide) (PEO)-like oligomer species. Subsequent electrochemical cycling makes the SEI relatively thick and rough with the chemical composition heavily dominated by LEDC monomer-dimer for 5× cycled a-Si. For 20× cycled a-Si, the TERS signal is dominated by carboxylate (RCO2Li) compounds of various conformations and fluorinated species (LixPOyFz). A nanomosaic-multilayer hybrid SEI model on top of the a-Si anode is proposed. The significance of this work is applicable not only to silicon, where SEI plays a dominant role in determining the cycle life performance and reversibility, but also for a number of other relevant battery chemistries such as Na-ion and multivalent redox systems.

The large-voltage hysteresis remains one of the biggest barriers to optimizing Li/Na-ion cathodes using lattice anionic redox reaction, despite their very high energy density and relative low cost....

Intermetallic compounds such as SnSb are promising anode materials for sodium ion batteries; however, their nanoscale sodiation mechanisms are not well understood. Here, we used a combination of in situ transmission electron microscopy (TEM), first-principles electronic structure calculations, computational thermodynamic modeling, and phase-field simulations to reveal the sodiation mechanisms and to quantify microstructural effects contributing to the underlying reaction kinetics in SnSb electrodes. During in situ sodiation experiments, the nanocrystalline SnSb thin films underwent a rapid amorphous phase transformation upon sodiation, as determined by in situ TEM and electron diffraction experiments. The Na+ diffusion coefficients were measured with and without an external electrical bias, and the data showed that an applied potential increased Na+ diffusion by an order of magnitude compared to solid-state diffusion. Furthermore, there was a distinct decrease in sodium diffusion upon the formation of the...

The next generation of high energy batteries using Li metal as an anode and utilizing a solid electrolyte requires good interfacial stability, reasonable ionic conductivity, and most importantly the ability to eliminate dendrites.i While most solid-state electrolytes suffer from both interfacial instability and Li penetration resulting in cell shorting,ii,iii The solid electrolyte Lipon has a remarkable ability to suppress dendrites, and enable solid state batteries that can cycle for more than 1000 cycles and support current densities as high as 10 mA/cm2.iii,iv Recent efforts have started to illuminate the origin of Lipon’s ability to enable high-energy solid-state Li metal batteries. This presentation will highlight the unique structure of Lipon and Lipon like materials, the interfacial structure of Lipon with Li metal, and the mechanics that enable high quality performance in Lipon based solid-state batteries.v,vi,vii Finally, the presentation will connect these findings from Lipon to outline key underlying principles that answer the question, how do we enable high energy Li metal batteries? Acknowledgements: Work for this presentation was funded by ARPA-E under contract #DE-AR0000775, and the US Department of Energy Office of Energy Efficiency and Renewable Energy for the Vehicle Technologies Office’s US-German Cooperation on Energy Storage: Interfaces and Interphases In Rechargeable Li-metal based Batteries Program and the Battery Materials Research Program under program managers Tien Duong and Simon Thompson. P. Albertus et al., “Challenges for and pathways toward Li-metal-based all-solid-state batteries”, ACS Energy Letters, 6, 4, 1399-1404, Mar. 2021. Fudong Han, Andrew S Westover, Jie Yue, Xiulin Fan, Fei Wang, Miaofang Chi, Donovan N Leonard, Nancy J Dudney, Howard Wang, Chunsheng Wang, “High electronic conductivity as the origin of lithium dendrite formation within solid electrolytes”, Nature Energy, 1, Jan. 2019. Andrew S Westover, Nancy J Dudney, Robert L Sacci, Sergiy Kalnaus, “Deposition and Confinement of Li Metal along an Artificial Lipon–Lipon Interface”, ACS Energy Letters, 4, 651-655, Feb. 2019. Juchuan Li, Cheng Ma, Miaofang Chi, Chengdu Liang, and Nancy J. Dudney. "Solid electrolyte: the key for high‐voltage lithium batteries." Advanced Energy Materials5, 4, 1401408, 2015. Andrew S Westover* Valentina Lacivita,* , Andrew Kercher, Nathan D Phillip, Guang Yang, Gabriel Veith, Gerbrand Ceder, Nancy J Dudney, “Resolving the amorphous structure of lithium phosphorus oxynitride (Lipon)”, Journal of the American Chemical Society 140 (35), 11029-11038, July 2018. Andrew S Westover, Robert L Sacci, Nancy Dudney, “Electroanalytical measurement of interphase formation at a Li metal–solid electrolyte interface”, ACS Energy Letters, 5, 12, 3860-3867, Nov. 2020. Sergiy Kalnaus, Andrew S Westover, Mordechai Kornbluth, Erik Herbert, Nancy J Dudney, “Resistance to fracture in the glassy solid electrolyte Lipon”, Journal of Materials Research, 36, 4, 787-796, Feb. 2021.

Silicon (Si)-based negative electrodes often have these two prerequisites for improved performance: submicron or nanoscale dimension and additives (generally for electrolytes). In this work, a single approach was implemented to achieve the beneficial effects of both. Functionalized Si particles with an average diameter of less than 300 nm and with good polydispersity indices (0.2 to 0.3) were successfully generated by ball-milling the Si with vinylene carbonate (VC) and polyethylene oxide (PEO). Surface characterization using x-ray photoelectron spectroscopy (XPS) confirms the modification of the Si surface and the presence of the additives even after the electrode fabrication processes. We demonstrate through half-cell cycling that the addition of small amounts of VC result in increased specific capacities compared to the neat Si, i.e., ~370 mAh.g-1 higher for Si-VC electrode after the formation cycles. On the other hand, the presence of PEO introduces a passivating film on the surface of Si that hinders Li+ transport to the electrode as indicated by electrochemical impedance spectroscopy (EIS), resulting in reduced specific capacities, i.e., ~325 mAh.g-1 less relative to the neat Siafter formation. Nevertheless, the Si-PEO system exhibited the most promising cycling stability compared to the neat Si and Si-VC electrodes after extended cycling. Similar observations were drawn from full cell studies using high voltage NMC 811 cathodes, confirming the viability of our approach for the improvement of Si-based next generation lithium-ion batteries.

The synthesis of solid electrolytes is often described as the mixing of simple precursors (e.g. Li2CO3, La2O3, etc.), followed by extensive heating and regrinding to yield a single phase solid ion conductor. In this presentation we move beyond the traditional "heat and beat" approach to synthesis to a more nuanced approach more analogous to classic organic synthesis with the controlled and stepwise addition of reagents. We will show this approach produces a 500 fold increase in grain boundary conductivity of perovskite solid electrolytes and the complete synthesis of others in under 15 minutes and 200oC lower reaction temperatures. Through control of reaction energetics reaction selectivity can be enhanced offering unique opportunities to facilitate the properties of solid ion conductors.